Configure MESH on WLC4402 with LAP1242

I have a Cisco 4402 WLC running version 4.2.112.0 controlling 20+ AIR-LAP1242AG-E-K9 access points running IOS 12.4 (10b). I'm trying to setup an additional AP as MESH. When I try to change the mode from local to bridge, on what will be the rootAP, I get a message stating that bridging is not support on this unit. What do I need to get this working?
Any help or pointers would be greatly appreciated.
Best Regards
Justin

Just to add to Amjad's post, you might be better off to just upgrade to the latest v7.0.x code. Since with the later codes, mesh is built in and also more if a stable code. The link below shows you the upgrade path.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_240_0.html#wp784219
Here is a link in what AP is supported in what WLC version also
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp98682
Sent from Cisco Technical Support iPhone App

Similar Messages

Configuring JCo3 Connection Pool with single sign on on non SAP Java server

Hi Everyone,
i have configured a connection pool on JBoss as per JCo3 Documentation and is working great.
Now I need help to configure this connection pool with single sign on so that RFc on SAP ECC systems are executed using end users credential rather than using single user name password used to configure JCo connection pool.
On SAP Java stack I am sure its possible within Java WebDynpro and i assume using JCA resource adapter. But what if we don't want to use SAP Java App server.
Any help will be appreciated.
Thanks,
Divyakumar Jain

Eason, 你好！
I have exactly the same problem. Did you find a solution to this problem? If so, please let me know!

Unable to configure BI Publisher report with Primavera Unifier

Hello Friends,
We have installed Primavera Unifier 9.14 release on one Linux machine and OBIEE 11.1.1.7.0 is installed on another Linux machine.
For configuration, we shared OBIEE installed folder with the Primavera Linux machine.We followed all the steps that are mentioned in the configuration guide for OBIEE(BI Publisher) with Unifier.
While configuring BI Publisher Reports with Unifier,we are getting following error: Test connection failed.
"failed to create URL for the wsdl location: 'META_INF/wsdl/Catalogservice.wsdl' retrying as local file.
no protocol: /META_INF/wsdl/CatalogService.wsdl"
Unifier Log message:
ERROR: getCatalogInfo.ex=javax.xml.ws.WebServiceException: Provider com.sun.xml.ws.spi.ProviderImpl not found.
We have tested BIP login on Unifier application server machine and its working fine.
BIP END URL used: http://hostname:9704
BIP User: BIPUSER123
BIP Password: BIPUSER123
BIP Report Folder: ReportFolderName
BIPUSER123 user has admin privileges and also ReportFolder is having required access.
Is there any workaround or are we missing some configurations?
Thanks in Advance

configure one more virtual path which is unprotected from site minder. we had similar issue for Marketing and resolved by this virtual path.
ref:
http://vaandun-analytics.blogspot.com/2009/11/obi-publisher-with-empty-obi-catalog.html
Thanks
Sarathi

How do I configure a usable synchronisation with Google calendar

I think I have tried every permutation of configuration to synchronise Lightning with Google calendar.
I have Thunderbird 31.1.2 and Lightning 3.3.1
The GDATA provider has the well documented issue of either re-mailing all meeting attendees, or not sending out invitations to meetings, so this doesn't really work for me.
I have succeeded in seeing my Google calendar by using the iCalendar(ICS) option, but whenever I add a new calendar event in Lightning I get a "An error occurred when writing to the calendar 'My Name'!
Error Code : MODIFICATION_FAILED
When I try using CalDAV I don't see the events in my Google calendar in the resulting calendar in Lightning. I'm not sure I have the right 'Location' parameter, I have multiple Google calendars, the details available on the various web forums are not very explicit about how to get the location when using multiple Google calendars.
Finally the Post on the Mozilla support forum states that I should use the Google Calendar option, which is not present!
I am sure this is possible, any help would be appreciated.
I have now turned on full logging and see the error:
[JavaScript Error: "[calCachedCalendar] replay action failed: null, uri=https://www.google.com/calendar/dav/{myusername}%40gmail.com/events, result=2147500037, op=[xpconnect wrapped calIOperation]"]
I think I have solved this one already. Deatails of the correct CalDAV locations can be found here:
https://blog.mozilla.org/calendar/2013/09/google-is-changing-the-location-url-of-their-caldav-calendars/
and here:
https://developers.google.com/google-apps/calendar/caldav/v2/guide#connecting_to_googles_caldav_server
It would be useful to update the Mozilla documentation accordingly. Can I help do that?

Caldav works for me.
I set it according to what is described here:
https://blog.mozilla.org/calendar/2013/09/google-is-changing-the-location-url-of-their-caldav-calendars/
Lightning doesn't let me edit a calendar's address once it's been inserted. I have to delete the existing calendar and then add it again.
What documentation have you found to edit? It seems to me that for years it has relied on a page at google, and that disappeared when they stopped referring to the now defunct stand-alone calendar, Sunbird. I'm not sure there's ever been an authoritative reference owned by Mozilla. Those documents referring to endpoints aren't easy to find.

How to Configure and Integrate EP with CRM

Hi Everybody,
I want to integrate EP with CRM.
I am using SAP WAS Server.I have installed Portal.
I downloaded CRM Business packages.
1)How to integrate and configure in the EP with SAP R/3(CRM Module).
2)What are the prerequisities.
Plaese prove the exact help and documents.

Hello,
I think this <a href="http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N12_Scen_InstallGuide_EN_US.doc">Scenario Installation Guide</a> from the <a href="http://help.sap.com/bp_epv260/EP_EN/index.htm">SAP Best Practices for Enterprise Portal V2.60</a> can help you.
Regards
Gregor

How to Configure a mail server with OIM

Experts ,
Any idea/links/Docs on how to configure a mail server with OIM and to send mail notification to someone .
Pardon me, if my questions seems to be incomplete .
Thanks
Suren

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

How to configure the .ini file with applet

hai
i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browser

Hi Jay SenSharma,
Thanks for your immediate response.
I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
Regards,
S.vinoth Babu

Can I configure a 79xx Phone with two busy trigger using UCCE 8.5?

Hi, my name is Eric and I've some doubts to configure my Phones. First of all, I will explain my environment below:
- UCCE 8.5
- CM 8.5
- CVP 8.0
I would like to know if it's supported if I configure a 79xx Phone with 2 busy triggers configuration, because the customer would like to the agent's phone receive two calls per line.
Thank you very much.

Eric,
No, this is not supported and stated as such in cisco docs.
Customer will need to designate separate DN for ACD calls and separate DN for DID/personal calls.
HTH,
Chris

Error with Utility Configuration 9.3.1 with Foundation services

I have a problem while configuring Utility Configuration 9.3.1 with Foundation services.
I have entered "Oracle db 10g express edition" database configuration details.
When I proceed for next step button, after couple of minutes system throw an exception "couldn't open service manager".
Please find below detail error message from configtool.log. I am using Vista Home edition operating system.
Any help would be appreciated.
VR-
(Aug 15, 2010, 01:35:16 PM), com.hyperion.cis.utils.Shortcut, ERROR, Cannot create shortcut
ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Native Method)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.desktop.GenericDesktopService.createDesktopItem(Unknown Source)
     at com.hyperion.cis.utils.Shortcut.internalCreateShortcut(Shortcut.java:98)
     at com.hyperion.cis.utils.Shortcut.createShortcut(Shortcut.java:74)
     at com.hyperion.cis.utils.Shortcut.createShortcut(Shortcut.java:89)
     at com.hyperion.cis.config.AppServerDeployer.createStartStopShortcuts(AppServerDeployer.java:812)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:772)
     at com.hyperion.hub.HubAppServerDeployer.postDeploy(HubAppServerDeployer.java:245)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:679)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:252)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Aug 15, 2010, 01:35:16 PM), com.hyperion.cis.utils.Shortcut, ERROR, Cannot create shortcut
ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Native Method)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.desktop.GenericDesktopService.createDesktopItem(Unknown Source)
     at com.hyperion.cis.utils.Shortcut.internalCreateShortcut(Shortcut.java:98)
     at com.hyperion.cis.utils.Shortcut.createShortcut(Shortcut.java:74)
     at com.hyperion.cis.utils.Shortcut.createShortcut(Shortcut.java:89)
     at com.hyperion.cis.config.AppServerDeployer.createStartStopShortcuts(AppServerDeployer.java:820)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:772)
     at com.hyperion.hub.HubAppServerDeployer.postDeploy(HubAppServerDeployer.java:245)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:679)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:252)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)

Hi,
I just did come across this error today, and thought of sharing with the solution. This error is due to insufficient previlages of user, while he is trying to configure the hyperion Products. So all you have to do to solve this is, while you try to configure, right click on the configuration utility and run as administrator, and do the configuration as usual.This would solve this issue. I did not have this issue with Windows 2003 Server, but faced this while installing on Windows 2008 Server.
Thanks,
Leo Jose.

How to configure a test sever with the system copy with prd data

Dear All ,
I need to configure a test sever with the system copy with prd data.
Please any one can suggest the step by step process to do the same configure and system copy.
Regards
kumar

Dear All,
I am facing problem in system copy. I want to knoe the way after restore i can move all the data and server data in one drive .
Now the error is resolve by changing the initTAT.sap the value tape to disk but now stuck in the drive for restore it is asking which is not there at os level.
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD33' at location
BrDirCreate-1
BR0253E errno 2: No such file or directory
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD32' at location
TO solve the above problem i have created ad network drive for this but once all the restore will be completed than how i can i move the data form network drive to on drvie.
Please suggest
Regards,
Kumar
Edited by: kumarmoh on Jul 21, 2009 1:43 PM

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

How to configure Ogone for working with business catalyst ?

How to configure Ogone for working with business catalyst ?
In france ogone seems to be the only solution for seamless payment and there's no explications on the forum to configure it.
Thx for your answers

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

I am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

i am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

The ip-adress cannot be the same as your laptop. You have to make sure that your ip-adress is unique in the network. if your ip is 192.168.1.100 try 192.168.1.112 or somthing. More advanced is to check avalible adress in your router.

Can Photoshop shortcuts be configured to be used with a PlayStation controller?

A Japanese guy has claimed@ in this video (簡単な漫画の描き方(2)【木星在住】 - YouTube 0:51->0:59) that Photoshop shortcuts can be configured to be used with a PlayStation controller. Can they?

Thanks John.
I suspect that may be the best answer I am likely to get but have not marked the question as answered just in case someone else can add anything.
Your suggestion does work. I changed JPEG, TIFF and PSD to Photoshop CS3.
The only (quite major) snag is that if I am using Elements and double-click a photo, it opens Photoshop CS3.
This wouldn't matter if I was just using PS exclusively but I also want to use PSE at times.
Looks as though I had better just leave them with their own versions of Bridge.

Need Steps for Configuring BI 7.0 with ECC 6

Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran Telkar

Hi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy

Configure MESH on WLC4402 with LAP1242

Similar Messages

Maybe you are looking for