Configure Mobile BO out of my network

Hi experts,
I have installed BO Mobile 3.1
All work fine if i´m in my private network, but, if i go out my network don´t work, why?
I do a redirection of ports with a public IP and ports 6400, 11011, 11711, 8080 and in my mobile client:
Mobile server:
Are there any wrong?
Thanks in advance,
Regards,

It works now...
I replaced the hostname with the ip-addresses in the VAS and VMS server-config, then it worked.
VAS:
[comm $ external $ default]
EXTERNAL_HOSTNAME= <external IP-Address of the mobile-server>
EXTERNAL_PORT= <external VAS-port of the mobile-server>
CLIENT_TYPE=any
CLIENT_HOSTNAME=0.0.0.0
VMS:
[comm $ external $ default]
EXTERNAL_HOSTNAME= <external IP-Address of the mobile-server>
EXTERNAL_PORT=<external VMS-port of the mobile-server>
CLIENT_TYPE=any
CLIENT_HOSTNAME=0.0.0.0
From the mobile device (windows mobile), only the ip-address was reachable, but not the hostname (tested with a ping-programm from the mobile device).

Similar Messages

HP 3520 All-in-One Printer Falls Out of Wireless Network Periodicially

We have an ongoing problem with our HP 3520 All-in-One Printer. We set it up for wireless printing and it works....for a while. Periodically, we find that it falls off the wireless network and will not print except when plugged into the USB cable. The problem is that my husband has an Ipad Air as his main device which he cannot plug into the printer and needs to have wireless working...and the main reason we bought this printer was to have wireless capability. We *think* that it may be falling off the network when we have a brief power outage or Internet outage, which happens occassionally for a short time. Also, on my laptop, although the wireless set-up to this printer has worked in the past, now I see that I can either connect my laptop to the Internet network OR the printer, but not both at the same time. How strange is that?
I have printed out the Wireless Network Test Results AND the HP Network Configuration Page, in case that information can be useful as we attempt to troubleshoot this problem.
Note that the printer is no longer under warranty.
I have reviewed numerous HP product support pages and feel as if I am running in circles. The help information is confusing to us and we have spent so many hours trying to troubleshoot this issue that my husband has completely given up on that printer and I am doing my best to try to save it since it is only about a year old.
We appreciate any help you can give us to remedy this ongoing problem.
PSCo

Hello there PSCo, Welcome to the Forums! I hope you enjoy your experience
I saw your post about your Deskjet 3520 dropping the network connection. It very well could happen if the power goes out or Internet disconnects. I have found a troubleshooting guide that is geared to help repair the wireless connection disconnecting. It will go further into detail about the causes and things to do to help.
I hope the steps work for you!
Printer Does Not Maintain Wireless Connection
Thanks for posting, enjoy the rest of your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

To acess grid control out of the network (example from my house)

Its possible to configure grid control console and oms to access out of the network , for example from my house by internet access.
Thanks

If you want to connect to the EM Website you should have a connection from your home to your company. Usually using a VPN you can solve this.
If you want to monitor the temperature of your fridge using GridControl (if you manage to install an agent on the fridge) than you have to configure proxies for your GridControl and your agent - if there is a firewall between home and work (hopefully there is one ;-)
We are using a VPN tunnel to connect from home office to our company lan. There are several ways to do this in a secure way (RSA tokens, smartcards, fingerprints etc.)
regards
Andreas

Does the K8N Neo-FSR support the mobile chip out of the box

just like the titles says
does the K8N Neo-FSR support the mobile clawhammer out of the box.?
if not what bios would i need,. or can anyone confirm what bios is being shipped on these motheboards now.

Jim,
From what I've read, there are updates to the memory controller and the addition of SSE3 support to Venice. It's also reported to have some performance improvement over Winchester and Newcastle. It will use a default 1.4v VCore. Hopefully, It's power comsumption is on the same order as the 90nm Winchester's or less.
If Monarch is shipping the combo with available Bios, you can bet they work. I'm thinking of giving them a call on mine to transfer the 2yr warranty to my youngest daughter (it's a graduation gift) and to discuss the Bios 3.3 vs. 3.3B3 issues. They shipped mine with B3, and I think there may be a reason. The B3 works great with a simple WPCRSET patch of the CAS to RAS Delay. That's why you see those memory settings working on mine.
On the "boxed" vs. OEM, I think buying the combo with warranty and a better heatsink is a much better choice. Use the Venus 7+ in my specs. It's low profile, all copper, and one of the highest rated. Monarch has it in their configurator. It's as quiet as AMD's. Monarch also gives you a 30 day free return with a Fedex prepaid shipping label in the package.
Danno

SCCM remote control keeps dropping out when another network adaptor loses connection

Hey guys,
Hopefully someone will be able to help me out
at work, we are running SCCM 2012, and I use SCCM 2012 config manager to manage the clients etc
We have a particularly annoying issue with SCCM remote control; it constantly drops out when a network connection on the client machine disconnects or changes state, even if its not interface I'm remote controlling through
Here's an example for you:
a laptop with a wired, and wireless connection:
I remote control the machine through the wired network address (lets say 192.168.0.1), but if the wireless connection drops out (someone turns it off or it breaks) the remote control client will kick me off, lock the screen, and I have to wait 20-30 seconds
before it will accept my connection again
This happens with any network adaptor that's installed on the client
Here is a copy of the logs re-creating this issue: https://www.dropbox.com/s/nu4w28d44xky3rg/CmRcService.log
(I've edited it to take out usernames and IP addresses as they are publicly accessible)
So my question, does any one know how to fix this issue? I see it uses WMI, is there anyway to get WMI to ignore an interface?
Thanks heaps,
Harry

This is going to be done by design for security reasons. If the network connect for whatever reason is down the pc will automatically be locked.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers?
I was not able to find profile manager on my employer's installation of 10.6 Server. Is this only a feature of 10.7/10.8 server?

10.6 server does not have profile manager, profile manager is only available in 10/7 and 10.8 server
for 10.6 server you'll need to use wgm and server admin
printer management with 10.6, I recommend you read the relevant server manuals regarding
print server and user management, printer management

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

I get an error message when trying to install software update 4.2.8 "problem downloading, network connection timed out. Check network connections.

I get an error message when trying to install software update 4.2.8
"problem downloading, network connection timed out. Check network connections."
Anyone one else had this problem?

Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799

How can i find out the original network/carrier of my iphone4 ??

how can i find out the original network/carrier of my iphone4 ??

settings - general - about - scroll to network.
also try contacting the person who purchase the phone for you and have them contact the seller.

What does ""we are closing out the Pure Networks account" mean?

I received the email saying that "we are closing out the Pure Networks account".
Does that mean that all support for Network Magic will cease?
I am already having trouble reinstalling it.
If support is to cease, please issue a one-time patch to existing users to bypass the verification part of the installation process. That is the least you can do for your customers.
John

I believe Pure Networks and their product Network Magic is no longer in operation. They pulled down their support and closed their servers a year or so ago. Check this link from Linksys: http://store.linksys.com/Cisco-Software_stcVVcatId553232VVviewcat.htm

How do find out what your network password is if you forgot it?

How do find out what your network password is if you forgot it?

It should be in your Keychain. Find it in Keychain Access.

To configure SSIS packages out of these SQL Server Standard, Web and Workgroup editions which is preferred?

Hi All,
To configure SSIS packages out of these SQL Server Standard, Web and Workgroup editions which is preferred?
Grateful to your time and support. Regards, Shiva

Hi Shiva,
SSIS designer and runtime, basic transforms, and data profiling tools are only supported by Standard and higher editions. Besides, some advanced SSIS adapters such as High performance Oracle/Teradata destination and Dimension processing destination adapter
are only supported in Enterprise edition. So, if you need to develop/modify SSIS packages on this server, Standard or even Enterprise editor is recommended.
Reference:
http://msdn.microsoft.com/en-us/library/cc645993.aspx#SSIS
Regards,
Mike Yin
TechNet Community Support

Since I joined creative cloud, I have not been able to sync. Why the difference? Worked good during initial trial. Also I had installed the Mosaic app before Lightroom mobile came out and I cannot seem to get rid of it. How can I get mosaic out? I have ca

Since I joined creative cloud, I have not been able to sync. Why the difference? Worked good during initial trial.
Also I had installed the Mosaic app for ipad before Lightroom mobile came out and I cannot seem to get rid of it. How can I get mosaic out? I have cancelled, I have deleted, I have looked through the files for visible remnants.

The sync count is 60 and static. The total number synced so far is 500+. None have been synced from the ipad except for corrections made there on those already synced.
I have deleted the Mosaic app from all machines and checked the library folder and have contacted the Mosaic tech support and they have discontinued my subscription. I still get mosaic messages on initiating Lightroom and sometimes at closing.
I have not tried to sync fewer yet, but some catalogs that I have tried are smaller numbers. Initially, it did well on good connections. Nothing works on my home connections over satellite.

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is network

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.

Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
Try what I suggest think to will help u

Can't configure time capsule to extend my network

hi i tried many times to configure time capsule to extend my network everytime it doesn't work
airport utility cant find time capsule and i have to reset it everytime
my wireless network details are i
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 10.0.50.
IPv4:
Addresses: 10.0.50.
Configuration Method: Manual
Interface Name: en1
NetworkSignature: IPv4.Router=10.0.50.1;IPv4.RouterHardwareAddress=00:90:4c:91:00:01
Router: 10.0.50.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
DNS:
Search Domains:
Server Addresses: 196.1.69.98, 196.1.69.100

Are you running 7.3.1, when I did what you were trying everytime I turned on the wireless encryption it could no longer find the time capsule when I rebooted the time capsule. It worked fine once I left it long enough that it found the fact that the Time Capsule had an upgrade to 7.3.1
Once I got the upgrade in the Time Capsule, the system worked fine.

Configure Mobile BO out of my network

Similar Messages

Maybe you are looking for