Configure MS 5.2 with a hub server

Hello
How can i configure MS 5.2 to routed via a hub server all messages to internet destination, and for message to my enterprise domain not to the hub server (i have 4 servers to manage my enterprise messaging).
Actually, i have a configuration in the channel tcp_local with "daemon <hub server>" and so all messages passed to the hub to access if the user is on an other MS 5.2 server.
Thank you.

I'm sorry. I don't quite understand your questions.
For outbound use of a mail hub, the daemon keyword is correct, for tcp_local. If you want internal mails routed through the hub, you can use the same syntax on the tcp_intranet channel, too.
For inbound mails, as long as the mail hub MTA is ours, it'll route automatically, based on the value of "mailhost" in the users' ldap entry.

Similar Messages

How to configure a Windows machine with any vnc server software for ARD

I need someone to direct me in the right direction to configure and install any vnc server software so that I can control a windows machine with ARD like I control the rest of my macs in the lab. I need some suggestions as to the best and easiest software to configure and the correct settings to get the machine to be able to show in ARD. Thanks

Sort of. I found this article below that helped me to connect to the remote CF server using MXML. It seems that you have to create a regular project in Flex with Aplication Server Type set to None and connect to CF using the endpoint attribute of the RemoteObject MXML tag or via AS.
http://www.aliaspooryorik.com/blog/index.cfm/e/posts.details/post/200
However I found out after getting error using the AS3 code to use the endpoint property that
mx.rpc.remoting.RemoteObject does not support the "endpoint" property
whereas mx.rpc.remoting.mxml.RemoteObject does. See link below
http://www.mail-archive.com/[email protected]/msg101439.html//www.mail-archive.com/[email protected]/msg101439.html
So I had to change my AS3 code by adding a new channel to my RemoteObject using a code similar to the one on the link below (Note that this code uses PHP, when I instantiate myRemoteObject, I do so informing that the destination is "ColdFusion" [new RemoteObject("ColdFusion")], so no need to set destination as in the code on the link below
http://tech.groups.yahoo.com/group/flexcoders/message/120115
I hope that helps you.

Configuration of CISCO 3502I with Windows 2003 Server SE

Hi,
I am currently trying to configure a CISCO Aironet AIR-CAP3502I-E-K9 with Win Server 2003 Standard Edition.
First of all is it even possible to cinfigure the above device using DHCP so that it can be run as an access point or can it only be used with a CISCO Controller,
Does the server need to be a Win 2003 Ent?
In my situation the Windows Server is the controller we don't have a CISCO controller
I have created a Vendor class attribute on the DHCP pool of the windows server using option 43
The IP address of the DHCP server is 10.203.125.48 but the users are sitting on the 10.203.122.xxx subnet. The AP is currebtly sitting on the same subnet as the DHCP server(125)
I have created an Option Class called 'CISCO Ap' with an option code of 241 on the DHCP scope
Under Scope options I have then created an option 241 option name and under 'Available Options' ticked the option 43 and added the name of the DHCP server IP address.
When I switch on the AP it is blinking green but I get the following error attached.
Any Help would be appreciated
Thanks
Immy

That error is "normal" because you are using a 3500 AP. This particular model of AP requires a wireless LAN controller (WLC).
You "cannot" load autonomous IOS into the 3500 for wireless service.

Problems configuring Platform Domain with MS Sql Server

Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
[config.xml]

Try removing the server section from the SchemaProperties line.
Preferrably do not use localhost or hostnames in the server
configuration file.
<RDBMSRealm
Name="wlcsRealm"
DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:yourIPAddress:1433"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"
SchemaProperties="user=system;password=weblogic"/>
Also consider ...
If you have a new Portal database created in SQL Server?
Does the user system have the Portal database as his default database?
-- Jim
Vikram wrote:
Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Domain Name="epmsDomain">
<Log
FileName="logs/wl-domain.log"
Name="epmsDomain"
/>

<Server
Name="platformServer"
     ListenAddress="localhost"
ListenPort="7501"
NativeIOEnabled="true"
TransactionLogFilePrefix="logs/"
>
<SSL
Name="platformServer"
ListenPort="7502"
Enabled="true"
ServerCertificateChainFileName="ca.pem"
ServerCertificateFileName="democert.pem"
ServerKeyFileName="demokey.pem"
/>
<Log
FileName="logs/weblogic.log"
/>
<WebServer
DefaultWebApp="splashPage"
LogFileName="./logs/access.log"
LoggingEnabled="true"
Name="platformServer"
/>
</Server>

<JDBCConnectionPool
Name="commercePool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
InitialCapacity="20"
MaxCapacity="20"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
Targets="platformServer"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
/>

<JDBCConnectionPool
CapacityIncrement="2"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
InitialCapacity="8"
LoginDelaySeconds="1"
MaxCapacity="36"
Name="wliPool"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
RefreshMinutes="0"
ShrinkPeriodMinutes="15"
ShrinkingEnabled="true"
Targets="platformServer"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="weblogic.jdbc.pool.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="WLAI_DataSource"
Name="WLAI_DataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="com.bea.wlpi.TXDataSource"
Name="TXDataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="WLCHub.DS"
Name="WLCHub.DS"
PoolName="wliPool"
Targets="platformServer"/>
/>

<JDBCTxDataSource
     EnableTwoPhaseCommit="true"
JNDIName="cgDataSource"
Name="cgDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="cgSampleDataSource"
Name="cgSampleDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JMSConnectionFactory JNDIName="weblogic.jws.jms.QueueConnectionFactory"
Name="cgQueue" Targets="platformServer"/>
<JMSJDBCStore ConnectionPool="commercePool" Name="cgJDBCStore" PrefixName="WEBLOGIC"/>
<JMSServer Name="cgJMSServer" Store="cgJDBCStore" Targets="platformServer">
<JMSQueue JNDIName="jws.queue" Name="cgJWSQueue" StoreEnabled="default"/>
</JMSServer>
<JTA Name="epmsDomain" TimeoutSeconds="3600"/>


<JDBCConnectionPool
Name="dataSyncPool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="WEBLOGIC"
InitialCapacity="1"
MaxCapacity="5"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
Targets="platformServer"/>
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.dataSyncPool"
Name="dataSyncPool"
PoolName="dataSyncPool"
Targets="platformServer"/>
/>

<Security
GuestDisabled="false"
Name="epmsDomain"
PasswordPolicy="wl_default_password_policy"
Realm="wl_default_realm"
CompatibilityMode="true"
/>
<PasswordPolicy
Name="wl_default_password_policy"
/>
<Realm
Name="wl_default_realm"
CachingRealm="wlcsCachingRealm"
FileRealm="wl_default_file_realm"
/>
<CachingRealm
BasicRealm="wlcsRealm"
CacheCaseSensitive="true"
Name="wlcsCachingRealm"
/>
<RDBMSRealm DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:localhost:1433"
SchemaProperties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Name="wlcsRealm"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"/>
<FileRealm
Name="wl_default_file_realm"
/>
<StartupClass
ClassName="com.beasys.commerce.ebusiness.security.KeyBootstrap"
FailureIsFatal="false"
Name="KeyBootstrap"
Targets="platformServer"
/>

<JMSConnectionFactory Name="WLI_B2B_TopicFactory"
JNDIName="com.bea.wli.b2b.server.TopicConnectionFactory"
AllowCloseInOnMessage="true"
UserTransactionsEnabled="true"
Targets="platformServer"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wli.b2b.rosettanet.QueueConnectionFactory"
Name="RNQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="false"
DefaultDeliveryMode="Persistent"
DefaultPriority="4"
DefaultTimeToLive="0"
JNDIName="com.bea.wlai.JMSConnectionFactory"
MessagesMaximum="10"
Name="WLAI_JMSConnectionFactory"
OverrunPolicy="KeepOld"
UserTransactionsEnabled="true"
Targets="platformServer"/>
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.TopicConnectionFactory"
Name="wlpiFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.QueueConnectionFactory"
Name="wlpiQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSJDBCStore
ConnectionPool="wliPool"
Name="JMSWLIStore"
PrefixName="PBPUBLIC"
/>
<JMSServer Name="WLIJMSServer"
Targets="platformServer"
TemporaryTemplate="TemporaryTemplate"
Store="JMSWLIStore">
<JMSTemplate Name="TemporaryTemplate"/>

<JMSQueue Name="WLI_B2B_RNEncoderQueue"
JNDIName="com.bea.wli.b2b.rosettanet.EncoderQueue"/>
<JMSTopic Name="WLI_B2B_Topic"
JNDIName="com.bea.wli.b2b.server.B2BTopic"/>
<JMSQueue Name="WLI_B2B_OutboundQueue"
JNDIName="com.bea.b2b.OutboundQueue"/>

<JMSTopic Name="wlpiEvent"
JNDIName="com.bea.wlpi.EventTopic"/>
<JMSQueue Name="WLI_BPM_Timer"
JNDIName="com.bea.wli.bpm.TimerQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_Event"
JNDIName="com.bea.wli.bpm.EventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_ValidatingEvent"
JNDIName="com.bea.wli.bpm.ValidatingEventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSTopic Name="WLI_BPM_Error"
JNDIName="com.bea.wli.bpm.ErrorTopic"/>
<JMSTopic Name="WLI_BPM_Audit"
JNDIName="com.bea.wli.bpm.AuditTopic"/>
<JMSTopic Name="WLI_BPM_Notify"
JNDIName="com.bea.wli.bpm.NotifyTopic"/>

<JMSQueue Name="WLAI_ASYNC_REQUEST_QUEUE"
JNDIName="com.bea.wlai.ASYNC_REQUEST_QUEUE"/>
<JMSQueue Name="WLAI_ASYNC_RESPONSE_QUEUE"
JNDIName="com.bea.wlai.ASYNC_RESPONSE_QUEUE"/>
<JMSQueue Name="WLAI_EVENT_QUEUE"
JNDIName="com.bea.wlai.EVENT_QUEUE"/>
<JMSTopic Name="WLAI_EVENT_TOPIC"
JNDIName="com.bea.wlai.EVENT_TOPIC"/>
     
     <JMSQueue JNDIName="com.bea.wlai.WORKSHOP_ASYNC_RESPONSE_QUEUE" Name="WLAI_WORKSHOP_ASYNC_RESPONSE_QUEUE"/>
     <JMSQueue JNDIName="com.bea.wlai.WORKSHOP_EVENT_QUEUE" Name="WLAI_WORKSHOP_EVENT_QUEUE"/>

<JMSQueue Name="WLI_FailedEvent"
JNDIName="com.bea.wli.FailedEventQueue"
StoreEnabled="true"/>
<JMSTemplate Name="WLI_JMSTemplate"
ErrorDestination="WLI_FailedEvent"
RedeliveryDelayOverride="60000"
RedeliveryLimit="10"/>
</JMSServer>
<JMSJDBCStore Name="JMSWLIStore"
ConnectionPool="wliPool"
PrefixName="platformServer"/>






<Application
Deployed="true"
Name="taxWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/taxWSApp"
TwoPhase="true"
>
<EJBComponent
Name="tax"
URI="tax.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="tax-webservice"
URI="tax-ws"
Targets="platformServer"
/>
</Application>
<Application
Deployed="true"
Name="paymentWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/paymentWSApp"
TwoPhase="true"
>
<EJBComponent
Name="payment"
URI="payment.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="payment-edit webservice"
URI="pay-ws"
Targets="platformServer"
/>
</Application>

<Application
Deployed="true"
Name="wlpDocsApp"
Notes=""
Path="C:/bea/weblogic700/portal/lib"
TwoPhase="true"
>
<WebAppComponent
IndexDirectoryEnabled="false"
Name="wlpDocs"
Targets="platformServer"
URI="wlpDocs.war"
ServletReloadCheckSecs="300"
/>
</Application>

<Application
Deployed="true"
Name="portalApp"
Notes=""
Path="C:/bea/user_projects/epmsDomain/beaApps/portalApp"
TwoPhase="true"
>
<ApplicationConfiguration
Name="portalApp"
Targets="platformServer"
URI="META-INF/application-config.xml"
/>
<EJBComponent
Name="events"
Targets="platformServer"
URI="events.jar"
/>
<EJBComponent
Name="pipeline"
Targets="platformServer"
URI="pipeline.jar"
/>
<EJBComponent
Name="property"
Targets="platformServer"
URI="property.jar"
/>
<EJBComponent
Name="rules"
Targets="platformServer"
URI="rules.jar"
/>
<EJBComponent
Name="usermgmt"
Targets="platformServer"
URI="usermgmt.jar"
/>
<EJBComponent
Name="customer"
Targets="platformServer"
URI="customer.jar"
/>
<EJBComponent
Name="ebusiness"
Targets="platformServer"
URI="ebusiness.jar"
/>
<EJBComponent
Name="portal"
Targets="platformServer"
URI="portal.jar"
/>
<EJBComponent
Name="campaign"
Targets="platformServer"
URI="campaign.jar"
/>
<EJBComponent
Name="catalogws"
Targets="platformServer"
URI="catalogws.jar"
/>
<EJBComponent
Name="document"
Targets="platformServer"
URI="document.jar"
/>
<EJBComponent
Name="ejbadvisor"
Targets="platformServer"
URI="ejbadvisor.jar"
/>
<EJBComponent
Name="mail"
Targets="platformServer"
URI="mail.jar"
/>
<EJBComponent
Name="placeholder"
Targets="platformServer"
URI="placeholder.jar"
/>
<WebAppComponent
Name="toolSupport"
Targets="platformServer"
URI="toolSupport"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="tools"
Targets="platformServer"
URI="tools"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="datasync"
Targets="platformServer"
URI="datasync"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="splashPage"
Targets="platformServer"
URI="splashPage"
ServletReloadCheckSecs="300"
/>

</Application>
<Application
Deployed="true"
TwoPhase="true"
StagedTargets="platformServer"
Name="p13nConsoleApp"
Path="C:/bea/weblogic700/portal/lib"
>
<WebAppComponent
Name="p13nConsole"
ServletReloadCheckSecs="300"
Targets="platformServer"
URI="p13nConsole.war"
/>
</Application>

<Application Deployed="true" LoadOrder="900" Name="EAI" Path="C:/bea/weblogic700/samples/workshop/wlai/ear/" TwoPhase="true">
<EJBComponent
DeploymentOrder="100"
Name="repository-ejb.jar"
     Targets="platformServer"
URI="repository-ejb.jar"/>
<EJBComponent Name="WLI-B2B Startup"
DeploymentOrder="200"
Targets="platformServer"
URI="b2b-startup.jar"/>
<EJBComponent DeploymentOrder="300" Name="b2b-rosettanet.jar" Targets="platformServer" URI="b2b-rosettanet.jar"/>
<WebAppComponent DeploymentOrder="400" Name="b2b.war" Targets="platformServer" URI="b2b.war"/>
<WebAppComponent DeploymentOrder="500" Name="b2bconsole.war" Targets="platformServer" URI="b2bconsole.war"/>
<EJBComponent DeploymentOrder="600" Name="WLI-AI Server" Targets="platformServer" URI="wlai-server-ejb.jar"/>
<WebAppComponent DeploymentOrder="700" Name="wlai" Targets="platformServer" URI="wlai.war"/>
<EJBComponent DeploymentOrder="800" Name="WLI-AI Async Processor" Targets="platformServer" URI="wlai-asyncprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="900" Name="WLI-AI Event Processor" Targets="platformServer" URI="wlai-eventprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="1000" Name="wlpi-ejb.jar" Targets="platformServer" URI="wlpi-ejb.jar"/>
<EJBComponent DeploymentOrder="1100" Name="wlpi-master-ejb.jar" Targets="platformServer" URI="wlpi-master-ejb.jar"/>
<EJBComponent DeploymentOrder="1200" Name="wlpi-mdb-ejb.jar" Targets="platformServer" URI="wlpi-mdb-ejb.jar"/>
<EJBComponent DeploymentOrder="1300" Name="WLXTEJB.jar" Targets="platformServer" URI="WLXTEJB.jar"/>

Configuring JDBC connector with my Tomcat server

I realize this may be a dumb question, but I'm having trouble configuring my JDBC connector with my tomcat server. I'm trying to run a simple servlet that will access mysql database. I am almost certain its throwing an exception on the line:
Class.forName("com.mysql.JDBC.Driver");
I have a feeling the tomcat class path isn't finding the connector jar file.
Any help would be greatly appreciated.
Brian

I am almost certain its throwing an exception on the line:
Class.forName("com.mysql.JDBC.Driver");If it's a ClassNotFound exception or the like, then yes. Post the exception and stack trace if you need confirmation of this.
I have a feeling the tomcat class path
isn't finding the connector jar file.That's what I think too. Did you ensure that the MySQL driver JAR file was in the classpath?
It will need to be in common/lib under Tomcat, or WEB-INF/lib under your application.
For a more portable application you should use JNDI to obtain database connection resources, in which case you would want the JAR to be under common/lib.

Configuring JCo3 Connection Pool with single sign on on non SAP Java server

Hi Everyone,
i have configured a connection pool on JBoss as per JCo3 Documentation and is working great.
Now I need help to configure this connection pool with single sign on so that RFc on SAP ECC systems are executed using end users credential rather than using single user name password used to configure JCo connection pool.
On SAP Java stack I am sure its possible within Java WebDynpro and i assume using JCA resource adapter. But what if we don't want to use SAP Java App server.
Any help will be appreciated.
Thanks,
Divyakumar Jain

Eason, 你好！
I have exactly the same problem. Did you find a solution to this problem? If so, please let me know!

Configure OID 10.1.4.0.1 with Oracle Application Server 10.1.3.3

Dear gurus,
I have configured OID 10.1.4.0.1 and MRCA 10.1.4.0.1 on database 10.2.0.3 with Oracle Application Server 10.1.3.3 (HTTP Server and OC4J Server). it went well, i could login into my oid or sso page. then i deployed a simple jar file into OAS 10.1.3.3 and i updated few lines in mod_osso.conf on midtier 10.1.3.3, so it look like this :
==================================================================================================
LoadModule osso_module libexec/mod_osso.so
<IfModule mod_osso.c>
OssoConfigFile /u01/oraias/midtier/Apache/Apache/conf/osso/osso.conf
OssoIpCheck off
OssoIdleTimeout off
# Insert Protected Resources: (see Notes below for how to protect resources)
# Notes
# 1. Here's what you need to add to protect a resource,
# e.g. <ApacheServerRoot>/htdocs/private:
# <Location /private>
# require valid-user
# AuthType Basic
# </Location>
<Location /JABSUAT>
require valid-user
AuthType Basic
</Location>
<Location /HR>
require valid-user
AuthType Basic
</Location>
</IfModule>
# If you would like to have short hostnames redirected to
# fully qualified hostnames to allow clients that need
==================================================================================================
my application faces name is HR, so i called the URL http://devel.sas.co.id:7778/HR/faces/HomeMenu.jspx, the output was sso login page, so i did login with username : orcladmin and password : oracle1 but it turned me error page on browser, it said :
=========================================================
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
=========================================================
and i found that in /u02/oid/Apache/Apache/logs/error_log.1249430400 contains these lines :
[Wed Aug 5 09:13:33 2009] [notice] Accept mutex: fcntl (Default: sysvsem)
[Wed Aug 5 09:13:33 2009] [warn] long lost child came home! (pid 4924)
[Wed Aug 5 09:14:01 2009] [error] [client 172.16.2.14] [ecid: 1249438441:172.16.5.11:5080:0:2,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 09:14:04 2009] [error] [client 172.16.2.14] [ecid: 1249438444:172.16.5.11:5068:0:3,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 09:14:24 2009] [error] [client 172.16.2.14] [ecid: 1249438464:172.16.5.11:5093:0:2,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 09:49:36 2009] [error] [client 172.16.2.14] [ecid: 1249440576:172.16.5.11:5074:0:20,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:30:01 2009] [error] [client 172.16.2.14] [ecid: 1249443001:172.16.5.11:5096:0:25,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:34:13 2009] [error] [client 172.16.2.14] [ecid: 1249443253:172.16.5.11:5102:0:26,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:58:58 2009] [error] [client 172.16.2.14] [ecid: 1249444738:172.16.5.11:5093:0:40,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 10:59:09 2009] [error] [client 172.16.2.14] [ecid: 1249444749:172.16.5.11:5093:0:41,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at devel.sas.co.id Port 7782
Note : 172.16.2.14 is my pc and 172.16.5.11 is OID and MRCA's IP, please need your suggestion, Many Thanks.
Regards
Edited by: andes on Aug 4, 2009 9:23 PM
Edited by: andes on Aug 4, 2009 9:28 PM

Dear gurus,
i have solved my problem, i re-run ssoreg.sh and re-configure mod_osso.conf, now it's working.
Regards

HT1277 how to configure mail OSX 10.9 (iMac) with Small Business Server 2003 ?

How to set up mail on brand new iMac OSX 10.9 with Small Business Server 2003

Can you clarify a little more? What part of SBS are you referring to when logging in? Via VPN? Remote Web Workplace? Etc?
I administer a SBS2003 network and actually use a Macbook to do it all. Hopefully I'll be able to help!

How to Configure Local J2ee Egine with Dev server ECC.

Hi,
working with ESS/MSS enhancements. I just imported DC from NWDI and create the application in NWDS.
But unfortunately I don't have access to Dev J2ee Engine to deploy and check my applications. I installed developer work place in my local machine.
Now have to test the applications which are related with ECC (like updating DB and fetching detailed from DB). for that I need to configure local J2ee Engine with Dev ECC.
Could you explain step by step details how can I do this or send me docs to venky0905 at g
Regards
Venkat.
Edited by: Juan Reyes on Apr 14, 2009 9:16 AM
Edited by: Venkat D on Apr 15, 2009 1:47 AM

Hi,
When I am trying to create and set to Jco RFC Provider in visual admin,
For creating I am giving the parameters of Dev ECC gaveway host & Service details and Direct application parameters.
When setting to Jco RFC Provider I am just trying to Connect to VPN as I need to connect Dev ECC. once I connect to VPN My local J2ee is shutting down as well visual admin also disconnecting.
I am not understood what's the connection wit Local J2ee Engine and VPN connection. Is there any netwrok connections I need to perform Or what else I can do to resolve this issue?
Can you please any once suggest on this at earliest.
Regards
Venkat

Configuring Settings for iPad users with OS X Server

Good afternoon!
i work for a government agency and we are fairly new to the Apple in the workplace environment. We have 25 total iPads and are trying to Manage them with OS X Server. What we are trying to acomplish is preventing the user from connecting the iPad to their own workstation. all backups and such are done over iCloud. There are other things we are trying to acomplish but this is the most confusing for me. any help would be appreciated.
Johnny Monroe
Bakersfield, CA

Just start with:
http://www.apple.com/ipad/business/it/management.html

Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exception

Do you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

Export data from BW to oralce with open hub service.

Hi Dear all,
When I tried to export data from BW to oralce with open hub service. There is no available RFC destination for this oracle system. That means i need to create a RFC destination for the oracle server.
How can i achive this, in SM59? But U don't know much how to configure this. Is there any expert can help me there?
Kevin

Hi kevinhuang ,
RFC connection.......... You can check in SM59 tcode...Double click on the the desired Source system
or
RSA1-->Source systems and then right click on Source system and Check
To test RFC connection...RSA1 ....Source system....... Right click on desired source system >> Connection Parameter.....Test connection
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
BI Open Hub Destination and data transfer process setup
http://www.ibm.com/developerworks/data/library/techarticle/dm-0802li/index.html
Hope this helps U.
Regards
Chandra Sekhar
Edited by: Chandra Sekhar T on Apr 21, 2009 3:36 PM

Outlook 2007 doesn't connect hub server automatically

We have exchange 2010 installed for our organization. We have two HUB transport mail servers in our system for load balancing purpose. When we configure Microsoft outlook in a workstation then it connect with hub02 even if we select hub01 manually.
what can i do now?
Setu Bandhan Saha

Hi,
To understand more about this issue, I’d like to ask How you manually selected the HUB01.
Because if there are multiple HUB roles in one site, by default, the HUB roles are always load balanced, and we don’t need to manually point the dedicated server.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
When we configure outlook, then we select the email server manually, in there we put the server name of the server.
Setu Bandhan Saha

Error with Utility Configuration 9.3.1 with Foundation services

I have a problem while configuring Utility Configuration 9.3.1 with Foundation services.
I have entered "Oracle db 10g express edition" database configuration details.
When I proceed for next step button, after couple of minutes system throw an exception "couldn't open service manager".
Please find below detail error message from configtool.log. I am using Vista Home edition operating system.
Any help would be appreciated.
VR-
(Aug 15, 2010, 01:35:16 PM), com.hyperion.cis.utils.Shortcut, ERROR, Cannot create shortcut
ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Native Method)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.desktop.GenericDesktopService.createDesktopItem(Unknown Source)
     at com.hyperion.cis.utils.Shortcut.internalCreateShortcut(Shortcut.java:98)
     at com.hyperion.cis.utils.Shortcut.createShortcut(Shortcut.java:74)
     at com.hyperion.cis.utils.Shortcut.createShortcut(Shortcut.java:89)
     at com.hyperion.cis.config.AppServerDeployer.createStartStopShortcuts(AppServerDeployer.java:812)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:772)
     at com.hyperion.hub.HubAppServerDeployer.postDeploy(HubAppServerDeployer.java:245)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:679)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:252)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Aug 15, 2010, 01:35:16 PM), com.hyperion.cis.utils.Shortcut, ERROR, Cannot create shortcut
ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Native Method)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.desktop.GenericDesktopService.createDesktopItem(Unknown Source)
     at com.hyperion.cis.utils.Shortcut.internalCreateShortcut(Shortcut.java:98)
     at com.hyperion.cis.utils.Shortcut.createShortcut(Shortcut.java:74)
     at com.hyperion.cis.utils.Shortcut.createShortcut(Shortcut.java:89)
     at com.hyperion.cis.config.AppServerDeployer.createStartStopShortcuts(AppServerDeployer.java:820)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:772)
     at com.hyperion.hub.HubAppServerDeployer.postDeploy(HubAppServerDeployer.java:245)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:679)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:252)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)

Hi,
I just did come across this error today, and thought of sharing with the solution. This error is due to insufficient previlages of user, while he is trying to configure the hyperion Products. So all you have to do to solve this is, while you try to configure, right click on the configuration utility and run as administrator, and do the configuration as usual.This would solve this issue. I did not have this issue with Windows 2003 Server, but faced this while installing on Windows 2008 Server.
Thanks,
Leo Jose.

HUB server consider ouside email as internal

Hi everybody,
My Exchange system has MBX server, CAS-HUB server and Symantec Messaging Gateway, no Edge server.
In my HUB role, I created a receive connector that is set permission to accept email from Anonymous and only from the IP of Symantec Messaging Gateway. In tab Authentication I check TLS and Externally Secured, in tab Permission I check Anonymous and Exchange
Servers.
But I notice that every email both inside and outside will be considered as internal, "X-MS-Exchange-Organization-AuthAs: Internal" while it should be
Anonymous. Since that our distribution groups get hundreds of spam email.
Did I make any mistake with the receive connector?

Hi Hiep,
According to your description, my understanding is that you want to create a receive connector as externally secured, Right?
You can refer to the following article to configure it:
Configure the Receive connector as externally secured
In addition, I also recommend you refer to the following articles to understand how to configure receive connectors base on different requirements :
Create an SMTP Receive Connector
Allow Anonymous Relay on a Receive Connector
Best regards,
Niko Cheng
TechNet Community Support

Configure MS 5.2 with a hub server

Similar Messages

Maybe you are looking for