Configure my apple mail in windows mail 2012?

I want to be able to receive my icloud mailon my  PC using windows mail 2012

Hi,
Configure computer as a mail server to install E-mail Services, which provides e-mail transfer and retrieval services. E-mail Services includes the POP3 service, which provides
e-mail retrieval, and the SMTP service, which provides e-mail transfer. Administrators can use the POP3 service to store and manage e-mail accounts on the mail server. After configuring this computer as a mail server, users can connect to the mail server and
retrieve e-mail to their local computer using an e-mail client that supports the POP3 protocol, such as Microsoft Outlook.
The related KB:
Configuring a mail server
http://technet.microsoft.com/en-us/library/cc780996(v=ws.10).aspx
The similar thread:
Windows 8/Server 2012, Outlook 2010, and POP3
http://social.technet.microsoft.com/Forums/windowsserver/zh-CN/08b3fada-5d0c-46ac-9017-2db54cd4b90b/windows-8server-2012-outlook-2010-and-pop3
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Configuring Volume Shadow Copies in Windows Server 2012 R2 Core

    Hello,
    I have a File Server under Windows Server 2012 R2 Core under a Lab Environment, I am trying to configure the Volume Shadow Copy on it, I tried to remote to its Disk Management via Computer Management but couldn't find the configuration for it.
    Any Ideas?
    For God, and Country.

    Hi Sheen Lim,
    As far as I know we can use cmdlets to manage the volume shadow copy in server core but can not use the server manager remotely. You can refer the following third party article
    to enable the VSS.
    Configure Shadow Copies on Server Core
    http://blogs.msmvps.com/ad/blog/2008/08/12/configure-shadow-copies-on-server-core/
    I’m glad to be of help to you!
    *** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
    sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
    of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Configure for Apple Mail

    Can't get authenticated to email server. Server is IMAP + SSL.
    But AUTHENTICATION protocol = MD5 Challenge-Response.
    I don't see any place to choose that as an option when configuring Email. How do I select that option?

    You get the correct settings (from Comcast) and enter them into Mail via Mail>Accounts

  • How to sync the apple mail with exchange servers?

    Hello, I am trying to configure the Apple Mail app to sync the mailboxes with the corporate EXCHANGE SERVER. The mails did not sync as I click, Is anybody had the same problem? is there any special configuration?
    vanderlei

    Unlike Gmail, which is set up as either an IMAP or Exchange account, POP accounts will delete messages from the server when they are retreived by an email client, such as your iPhone.  The only way to keep them longer is to change the Delete From Server setting on your account (if present) to Never. (This is supported by many, but not all, POP accounts).  This is usually found on your phone in Settings>Mail,Contacts,Calendars>tap your POP account, tap Advanced (usually under Outgoing Mail Server), tap Delete from Server, set to Never.  As for the messages already deleted, unfortunately they can't be retreived at this point since they have in all likelihood already been deleted from your POP account's server.  Also, you can't recover them from your iPhone backup as the backup doesn't not contain email messages.

  • Cleaning up emails using Apple Mail V7.3

    Hi all,
    I have four email addresses configured for Apple Mail v7.3 (1 iCloud and 3 IMAP addresses, two gmail and one yahoo). The collective volume of those boxes is substantial and needs a "clean out". The goal is to try and either sort emails into IMAP folders or delete as many unnecessary emails as possible permanently.
    I've tried to understand Mailbox behaviour settings at: Mail (Mavericks): Mailbox Behaviors preferences, however I find this confusing. People have noted this information contradicts Google's information at https://support.google.com/mail/answer/78892?hl=en and have suggested it is difficult to permanently delete emails from gmail.
    Many emails I have deleted via Mail just end up getting redelivered to Mail after I press the delete button. Also, attempts to remove attachments frequently fail and I end up back where I started. I suspect it's the settings in IMAP Access on gmail, but I can't be sure.
    I'd be very grateful for any help!
    karl3777

    Thank you for your time.
    Once one has updated iWeb a three pronged invitation appears on the screen. One of these invites you to 'announce' your changes. If you click on that, Apple Mail fires up with a pre-printed message and a nice little logo. It is up to you to insert any addresses to which you might care to send the notification of your up date.
    Now, I have created a group of addressees in Address Book that I call Blog Group 1. I have arranged this group such that the addresses of members are concealed from other members. This you can do in Apple Mail preferences under 'composing.'
    I then press the send button. Wheels spin and the machine whirrs and I receive a message that it can't be sent and that I should use another server. It supplies a list of possibilities. I try them all with the same lack of success. I no longer have the exact error message to hand and could only get it by sending my stuff out again and thereby unnecessarily bothering my correspondents.
    After messing around with all of this, I use precisely the same group with Microsoft Entourage and hey presto! it works.
    If I can send group emails with Entourage but not with Apple Mail then I hardly think that this can be an issue with my ISP. (I tried to phone tech support today to clarify the point but they are down!)
    Why then not use Entourage and be done with it, I hear you cry? For reasons that I cannot explain, I try to avoid using Microsoft products unless there is no alternative. Apple purports to have nicely integrated software and so why not use that?
    Do you now follow my problem? If you have any further insights, I shall be more than happy to hear them.
    Once again, thank you for your time.
    Cordially,
    David Amies

  • G(oogle)mail and Apple Mail: Cannot receive messages

    Hello,
    I have a googlemail account. My email address ends with "@gmail.com".
    I am trying to configure the Apple Mail application in Mac OS 10.2 (Jaguar). I can send but not receive messages.
    The German website says, i should set the server to "pop.googlemail.com", enter my password and use my email address "including '@googlemail.'" as username.
    Well, I think that is the reason why I cannot connect to the server, my Email address is gmail not googlemail.
    But whatever I enter in the respective fields (pop.googlemail.com, pop.gmail.com, pop3.....) all fails.
    Stupid as it is: event copying my settings from my smartphone does not help.
    What are the correct settings for me?

    Thank you,
    that really solved the problem.
    For all German customers, who participated in the public beta test of Google Mail ("invited users") and who have an email address, which ends with "@gmail.com",
    the correct servers are "pop.gmail.com" NOT "pop.googlemail.com"
    and "smtp.gmail.com" NOT "smtp.googlemail.com".
    Their German website is wrong in these cases. Moreother, the hint is missing, that SSL has to be activated for incoming mails as well.
    eMac 700 CD-RW   Mac OS X (10.2.x)  

  • Apple Mail send and receive problems, Network Solutions

    Hello Everyone,
    I'm currently facing a problem with a company email account that we have with network solutions.
    NSmail Pro (IMAP) that is configured with apple mail. Here are the settings that i have:
    Incoming mail: mail.(company.domain).com
    Port: 110
    SSL: No
    Outgoing mail: smtp.(company.domain).com
    Port: 2525
    SSL: No
    Auth: Password
    Whenever i'm at the office, I can send and receive emails without any problems (Using mail app), but when i'm at home i can't receive emails nor send one.
    I'm wondering if this has something to do with the Mail application, cause i can access the email using the webmail on a browser without any problems (either at home or at the Office).
    Any thoughts from our experts?

    I'm guessing that when you are at the office, you are probably accessing a company network and the company mail will only work with those settings on the company network. You may need to discuss this with your IT department at work to see if it need a different configuration for outside access.
    The fact that it works at work and not at home indicates a that it surely an issue with the connection setup.
    Assuming that you are accessing it through wi-Fi at both locations, do you have different wi-Fi connections set up on you Mac in Network Preferences, or is it the same wi-Fi connection used for both? In other words, do you have a specific wifi setup on your computer for connecting at the office?

  • The remote desktop session host configuration & Remote session shadowing options missing in Windows server 2012.

    Hi All,
    I am using a Windows server 2012 Standard. When i leave my session idle for more than 20 min it disconnects and post more 20 minutes my session is logged off.
    I know this setting can be changed from Remote desktop session host configuration in Windows server 2008 R2. But this option "Remote desktop session host configuration" is not there in Windows server 2012. Does any one have an idea where do i go
    and edit these settings in the Server 2012 o/s ?
    Also the Remote session shadowing option is also not available when i right click a user in the task manager. Any idea on an alternate method in Windows server 2012 ?
    Gautam.75801

    Exactly WHERE are the W2K12 R2 equivalent GPO settings to W2K8 R2 GPO settings of "Set time limit for disconnected sessions" and "set time limit for active but idle Remote Desktop Services
    sessions"?  Microsoft changed the remote desktop/terminal services around.  
    Appreciate it.
    Matt
     Policy Path 
     Scope 
     Policy Setting Name 
     Windows Components\Remote Desktop   Services\Remote Desktop Session Host\Session Time Limits 
     User 
     End session when time limits are   reached 
     Windows Components\Remote Desktop   Services\Remote Desktop Session Host\Session Time Limits 
     Machine 
     End session when time limits are   reached 
     Windows Components\Remote Desktop   Services\Remote Desktop Session Host\Session Time Limits 
     User 
     Set time limit for disconnected   sessions 
     Windows Components\Remote Desktop   Services\Remote Desktop Session Host\Session Time Limits 
     Machine 
     Set time limit for disconnected   sessions 
     Windows Components\Remote Desktop   Services\Remote Desktop Session Host\Session Time Limits 
     User 
     Set time limit for active but idle   Remote Desktop Services sessions 
     Windows Components\Remote Desktop   Services\Remote Desktop Session Host\Session Time Limits 
     Machine 
     Set time limit for active but idle   Remote Desktop Services sessions 
     Windows Components\Remote Desktop   Services\Remote Desktop Session Host\Session Time Limits 
     User 
     Set time limit for active Remote   Desktop Services sessions 
     Windows Components\Remote Desktop   Services\Remote Desktop Session Host\Session Time Limits 
     Machine 
     Set time limit for active Remote   Desktop Services sessions 
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Windows Server 2012: SMB share with transparent failover

    Have a nice day to all!
    I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.
    So, there are 2 arrays on every server:
    1. 2 x 1TB in RAID1 (+1 disk for hot swap) - system volume
    2. 5 x 1TB in RAID5 (+1 disk for hot swap) - data volume
    And I installed Windows Server 2012 Standard on each server.
    Than I created a failover two-nodes cluster.
    And now I want to create a SMB share with transparent failover for all the second (data) volume (it's about 3.3TB in RAID5 array). How just can I reach this goal? I'm going to use it in future for Hyper-V VMs, so, the main reqirement is powered-on and working
    VMs even if one node of SMB share cluster is failed.
    I wasn't able to see my volumes in failover cluster manager. I tried to create iSCSI targets, storage pools, virtual disks, etc. but no luck. My failover cluster manager can't see it to create SMB share!
    Can anyone advice me something?
    Thanks in advance!

    Have a nice day to all!
    I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.
    So, there are 2 arrays on every server:
    1. 2 x 1TB in RAID1 (+1 disk for hot swap) - system volume
    2. 5 x 1TB in RAID5 (+1 disk for hot swap) - data volume
    And I installed Windows Server 2012 Standard on each server.
    Than I created a failover two-nodes cluster.
    And now I want to create a SMB share with transparent failover for all the second (data) volume (it's about 3.3TB in RAID5 array). How just can I reach this goal? I'm going to use it in future for Hyper-V VMs, so, the main reqirement is powered-on and working
    VMs even if one node of SMB share cluster is failed.
    I wasn't able to see my volumes in failover cluster manager. I tried to create iSCSI targets, storage pools, virtual disks, etc. but no luck. My failover cluster manager can't see it to create SMB share!
    Can anyone advice me something?
    Thanks in advance!
    You need to have your storage you want to export as being a shared storage visible to your cluster (part of CSV). Then you'll configure failover file shares using content accessible from both cluster nodes. Refer to this manual for diagrams (ignore StarWind
    and replace it logically with your existing shared storage you've used to create your cluster):
    http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
    Also see these manuals from MS on how to create failover file server:
    http://technet.microsoft.com/en-us/library/cc753969.aspx
    http://technet.microsoft.com/en-us/library/cc731844(v=ws.10).aspx
    http://blogs.technet.com/b/askcore/archive/2010/08/19/working-with-file-shares-in-windows-server-2008-r2-failover-clusters.aspx
    However if you want to use existing storage located on the both nodes you're out of luck. Microsoft does not provide anything representing local DAS to the cluster nodes. If you want to use existing DAS then you'll have to stick with a third-party product
    like StarWind, SteelEye or DataCore. To create something like in this picture:
    So you'll have a configuration with only two nodes, no physical shared hardware (SAS JBOD, FC or iSCSI) and vSAN. Refer to this manual:
    http://www.starwindsoftware.com/ns-configuring-ha-file-server-for-smb-nas
    Hope this helped :)
    StarWind iSCSI SAN & NAS

  • Windows Server 2012/2012R2 NIC Teaming Mode

    Hi,
    Question 1:
    In Windows Server 2012 the following teaming mode was recommended for Hyper-V NIC teams:
    Teaming mode: Switch Independent
    Load balancing mode: Hyper-V Port
    All Adapers Active
    In a session at TechEd 2014 it was stated that Dynamic is the new recommendation for Windows Server 2012 R2. However, a Microsoft PFE stated a few weeks ago that he would still recommend Hyper-V Port for Windows Server 2012 R2. What is your opinions around
    this?
    Question 2:
    We have a Hyper-V Failover Cluster which isn`t migrated to 2012 R2 yet, it`s running 2012. In this cluster we use Switch Independent/Hyper-V Port for the team. We also use converged networking, having 2 physical adapters bound to the NIC team, as well as
    3 virtual adapters in the management OS for management, CSV and Live Migration. Recently one of the team NICs failed, and this incident also caused the cluster membership on the affected node to go offline even though the other team NIC was
    connected. Is this expected behaviour? Would the behaviour be different if 2012 R2 with Dynamic mode was being used?

    Hello,
    As for question number 1:
    For Hyper-V workload it's recommended to use Dynamic with
    Switch Independent mode. Why?
    This configuration will distribute the load based on the TCP Ports address hash as modified by the Dynamic load balancing algorithm. The Dynamic load balancing algorithm will redistribute flows to optimize team member bandwidth utilization so individual
    flow transmissions may move from one active team member to another.  The algorithm takes into account the small possibility that redistributing traffic could cause out-of-order delivery of packets so it takes steps to minimize that possibility.
    The receive side, however, will look identical to Hyper-V Port distribution.  Each Hyper-V switch port’s traffic, whether bound for a virtual NIC in a VM (vmNIC) or a virtual NIC in the host (vNIC), will see all its inbound traffic arriving on a single
    NIC.
    This mode is best used for teaming in both native and Hyper-V environments except when:
    1) Teaming is being performed in a VM,
    2) Switch dependent teaming (e.g., LACP) is required by policy, or
    3) Operation of a two-member Active/Standby team is required by policy. 
    As for question number 2:
    The Switch Independent/Hyper-V Port will send packets using all active team members distributing the load based on the Hyper-V switch port number.  Each Hyper-V port will be bandwidth limited to not more than one team member’s bandwidth because the port
    is affinitized to exactly one team member at any point in time. 
    In all cases where this configuration was recommended back in Windows Server 2012 the new configuration in 2012 R2, Switch Independent/Dynamic, will provide better performance.
    Microsoft recommend for a clustered Hyper-V deployment
    in Windows server 2012 to use Switch Independent/Hyper-V Port as you mentioned and to configure
    Hyper-V QoS that applies to the virtual switch. (Configure minimum bandwidth in
    weight mode instead of in bits per second and Enable and configure QoS
    for all virtual network adapters 
    Did you apply QoS on the Converged vSwitch after you
    created the team?? However Nodes are considered down if they do not respond to 5 heartbeats. The Switch Independent/Hyper-V Port does not cause the cluster to goes down if one NIC failed. The issue is somewhere else and not in the teaming mode
    that you choose.
    Hope this help.
    Regards,
    Charbel Nemnom
    MCSA, MCSE, MCS, MCITP
    Blog: www.charbelnemnom.com
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
    a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Cannot get db mail to work via SMTP Relay for Office 365 in SQL Server 2014 on Windows Server 2012 R2

    Our company recently moved to Office 365 which mean our on premise exchange server went away as well with the move.  I am trying to configure my new sql server (OS-Windows Server 2012 R2, DBMS- SQL 2014 Std Edtion).  After some searching I found
    this article (http://blogs.technet.com/b/meamcs/archive/2013/02/25/how-to-configure-sql-database-mail-so-send-emails-using-office-365-exchange-online-a-walkthrough.aspx) and have followed these steps exactly, but to no avail.  I did some further research
    on the SMTP relay I setup and found a way to test it (listed here http://technet.microsoft.com/en-us/library/dn592151(v=exchg.150).aspx at the bottom of the article).  If I drop the email.txt file in the pickup folder, it gets sent out no problem.
     I have configured my db email exactly as describe here(http://blogs.technet.com/b/meamcs/archive/2013/02/25/how-to-configure-sql-database-mail-so-send-emails-using-office-365-exchange-online-a-walkthrough.aspx).  But keep getting an unable to connect
    to SMTP server error.  I have even tried completely shutting down firewall to see if that is the issue and multiple restarts.  Any ideas how to get this to work on Office 365?
    DB Mail error log:
    Date 6/10/2014 10:28:41 PM
    Log Database Mail (Database Mail Log)
    Log ID 46
    Process ID 2196
    Mail Item ID 19
    Last Modified 6/10/2014 10:28:41 PM
    Last Modified By xx
    Message
    The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2014-06-10T22:28:41). Exception Message: Cannot send mails to mail server. (Failure sending mail.).

    Hi,
    I followed this blog and got the below error message in the Database Mail Log.
    “The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2014-06-11T19:34:00). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Unable to relay
    for [email protected]).”
    If you are getting the same error message, you can try the below steps to resolve the issue.
    1. Open the IIS 6.0 management console. Right click on the SMTP server and open the properties window.
    2. Click on the Access tab, click Relay button under Relay restrictions. loopback IP address (i.e 127.0.0.1).
    Then the email should be sent out from Database Mail without problem.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • I configured my iPad2 mail with my current settings. Now my Apple Mail on my Macbook Pro won't accept the password, which I did NOT change. I am running latest Snow Leopard on the Macbook. ANy help?

    After configuring my Ipad2 to accept mail at my .me account, I can no longer get my MacBook pro Apple Mail to accept the passwrod.
    I did not chnage the password when configuring iPad2 and it works perfectly.
    Using 10.6.8 and iPad is running most current update.

    Since I upgraded the hardware myself - the warranty that covers the computer is basically nulled.
    Warranty is not made void by upgrading memory or storage. If you have AppleCare then you should be fine.
    Disk Utility is powerful, but not the most powerful tool out there. There might be other applications (sometimes expensive) that can fix the volume. If your Windows partition works but not the Mac partiiton that leads me to believe the issue is solvable.
    Can you read the Mac files from your Windows partition?

  • How to export apple mail to Windows outlook 2013

    Is there any possible solution available to export all my data from apple mail to windows systen in outlook 2013.
    There are tons of emails that I have managed to save in the past 12 years (believe me there are a lot of them with multiple attachments) and I do not ant to loose any one of them. I Just want to move them to my windows system in outlook 2013 for which I could not find any particular solution.
    On the other hand outlook 2013 is unablr to sync all my emails via Imap. It shows multiple errors which I am not able to figure out. PLease suggest any simpler method which posses minimum hassles. Thanks

    Watching this long discussion I couldn't resist myself to share my view on this topic. Once in a while I too had the same problem and I had to transfer a **** lot of emails from Apple Mail client to Windows Outlook. Imap failed and was of no use for some stupid mail crashing reason. I searched for manual work-arounds and posted many queries on various mac forum sites (including this one). I received many responses as solutions for manual process but none of them could transfer my emails from apple mail to outlook.
    I knew about the email converters but never wanted to pay a single penny for them but unfortunately I had too. I bought this apple mail to pst converter mentioned by TON456 and after archiving apple mail data and moving it to windows system, it took the application only three clicks to convert the email file format to the desired one that outlook can import (i.e, .PST). I saw no point in buying the tool but its the fault of email client makers for not providing the proper import/export means (seems kind of mean to me, as they need us to stick to their client only). Big companies like apple and microsoft should figure out this situation and provide free solutions.
    On the other hand if Imap crashes (as mine did too) then users like us have no options other than email converters. Though they are costly but there is no help to user in pointing out those solution posts.
    To the thread starter I would suggest to go with Imap mail configuration but if it still doesn't work then using the apple mail to pst converter is only way left. Thanks.

  • ICloud Mail on Windows Live Mail 2012

    Hi.
    I have recently bought a new PC as my old one was showing its age (it was 6 years old). On my old PC (running Windows 7 Home Premium 64Bit), I had no issues running iCloud Mail inside Windows Live Mail 2012 using IMAP in the few years
    However, for some reason, I keep getting the following error on my new machine (Windows 7 Pro 64Bit):
    Your IMAP command could not be sent to the server, due to non-network errors. This could, for example, indicate a lack of memory on your system.
    Configuration:
       Account: iCloud (xxxx)
       Server: imap.mail.me.com
       Username: [email protected]
       Protocol: IMAP
       Port: 993
       Secure(SSL): 1
       Code: 800ccc0f
    I copied the whole Windows Live Mail email folder onto the new PC, and all the settings for my iCloud were imported, and worked out of the box (apart from the above issue). All the port/server information seems to work as expected, along with the other settings.
    Is there a way I can try and get to the bottom of this issue? The error suggests an issue with memory, and I am running Win 7 Pro on a Core i7 Quad Core Processor with 4GB of RAM, and Im nowhere near this on general browsing.
    Any help would be appreciated.

    Try running IE9 w/o Add ons.  Let me know if it works for you.

  • Why does Apple Mail window default to wrong monitor?

    I have two 30" Apple monitors with a MacPro 3.2 GHz Quad-Core Intel Xeon running Mavericks. In previous systems I would have my Apple Mail open on the second monitor. Since Mavericks nothing I do will let Mail open anywhere but in its default position, which is upper left corner of main monitor. Very frustrating. I must manually move it every time I launch Mail. Any solutions out there?
    fyi - iTunes window opens to the same position where I had closed it, which is on my second monitor where I want it.

    I have this with Firefox once in a while. To get it back where I want it, I open FF and drag it to the display I want it on & maximize it. Then, I open iTunes on the display I DON'T want FF in, and maximize it. Open a few tabs and close the window. When I reopen it iTunes prevents FF from opening on the other display and it goes back to the secondary.
    That may or may not work with Mail

Maybe you are looking for