Configure NAS for Clusterware

Hello All,
We are trying to install 10gR2 RAC . We have the following components:
Linux SUSE 10.2 -- 2 servers
additional NICs -- 2 (per each server above) Qty
NAS Device (256 MB, 1.2GHz, 2 Network Interfaces) -- 1 Qty
8-Port Switch -- 2 Qty
Cat 6 cables -- 6 Qty
We got stuck up on how to configure this NAS and make disks that are visible from both the nodes. The NAS device came with a CD and this software has a provisions to create shares. But we are looking for some kind of document which explains how to create these shares (or shared disks?) so that they are visible to both the nodes.
Since we are not Storage Engineers we are having great difficulties here. Highly appreciate anybody giving reference to some document with steps from scratch.
I will update this thread with each and every step I am doing to configure RAC with the above components so that i would be helpful to all of us here. But I need to move forward with configuring the NAS.
Thanks.

consult your nas vendor's documentation on how to set up NFS shares, then setup nfs mounts on your linux boxes. there is a metalink note that describes the neccessary mount options you have to set on your linux boxes.
Bjoern

Similar Messages

  • Configuring Storage for Clusterware on Raw devices

    My proposed system is:
    - Sun Solaris 10
    - Oracle 10G RAC
    - Oracle Clusterware
    - Raw devices for Clusterware files
    - ASM for database flies
    Assume I have appropriately sized LUNs assigned on my SAN for OCR and voting disks. My question is, how do I configure the raw devices required for these Clusterware files?
    I have read the Oracle RAC/Clusterware installation guide (Sun Solaris, SPARC), which goes as far as identifying the requirements but does not give the procedure. If I wish to use raw devices for ASM, it gives a procedure for creating partitions on the LUNs. Is anything like this required for the Clusterware files (OCR and voting disks)?

    As far as I know, Solaris follows the traditional raw device definition, which basically says that a raw device is a disk or a partition on a disk that does not contain a file system (yet). Given your question, this would mean that any device that you can find that does not contain a file system would be a raw device.
    Message edited here:
    However, you need to find the right link to this device in order to use it as a raw or character device. Otherwise, the device would be used as a block device, which means it will be buffered.
    On Solaris, those character devices should be listed under /dev/rdsk, while the block device would be listed under /dev/dsk. (Please, refer to: http://www.idevelopment.info/data/Unix/Solaris/SOLARIS_UnderstandingDiskDeviceFiles.shtml)
    End of update.
    Therefore, you have 2 options in your case. You can create LUNs in your storage that would be just suitable to host your Voting Disks and OCRs OR you can create a bigger LUN and put an OCR and a Voting Disk on this one, AFTER you have sliced the disk (LUN) using the format command.
    There is only one thing to remember: If you follow Oracle's recommendation to use multiple Votings and mirrored OCRs, it would obviously be better that those devices do not all share the same LUN (for availability reasons).
    Last but not least, you may want to have a look at the following forum for a similar discussion on using RAW devices under Solaris: http://forum.java.sun.com/thread.jspa?threadID=5073358&messageID=9267900
    Hope that helps. Thanks.
    Message was edited by:
    MarkusM

  • Configure NAS for Lion

    I've just upgraded, and can no longer access my NAS drive via go to server; I am told to see my system administrator. That would be me.. Any ideas for changing settings?

    I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
    Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
    I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
    I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
    Hope it helps you.

  • Hardware Configuration recommendation for SOA/BPM/OSB 11.1.1.5 Cluster

    Hi,
    Want to find out what is the recommended hardware configuration including Memory on the box. Trying to install a 2 Node Cluster of SOA 11.1.1.5 with SOA/BPM, BAM, OSB part of the same domain. All binaries to be installed on a NAS. OS is HP-UX. How much memory is ideal on each box if running SOA Service / BPM workflows and processes,BAM,OSB, Custom ADF Task Flow Apps with a large number of transactions. SO wondering what is an ideal configuration. IS there a matrix or a some kind of spreadsheet to come up with the numbers.
    Thanks

    Unfortunately there is no simple way to figure this out. The recommendation varies on the basis of multiple factors (from load to avg size of the payload). Please contact your local Oracle Sales Representative and they should help you out in identifying the best possible configuration/sizing for your system.
    Regards,
    Anuj

  • DHCP on NAS for trusted side

    Is it possible to configure NAS (on NAM perhaps) to assign IP addresses to clients on the trusted side - i. e. to act as a DHCP server for the trusted side subnets or change the address through the NAC Agent after the posture assessment is over?

    Boris,
    I'm assuming from the question that this is an OOB setup. If so, the agent requests a new IP if you're using Role-Based VLANs with VGW. In OOB RIP setups, it will also request a new IP when it gets on the final VLAN.
    CAS giving out IP addresses on the trusted subnets would not be possible, or even a good idea!
    HTH,
    Faisal

  • Error trying to configure ADS for printing from BW reports

    hi all,
    i am trying to configure ADS for printing off reports from the BW portal. I am using BI 7.0 (BW Portal version 7.0 SP10) and am getting the following error i nthe default trace file.
    #1.5#00187177BCAA008D000000DD0000144C00043EE522456586#1195053750220#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1678##BWD#PASS.TEST                       #B373727691C24C2FADD8534371BB536E#SAPEngine_Application_Thread[impl:3]_28##0#0#Fatal#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:216)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         ... 28 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 42 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 44 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    #1.5#00187177BCAA008D000000E00000144C00043EE522456FA1#1195053750220#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.application.message.impl.MessageBase#PASS.TEST#1678##BWD#PASS.TEST                       #B373727691C24C2FADD8534371BB536E#SAPEngine_Application_Thread[impl:3]_28##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    com.sap.ip.bi.base.exception.BIBaseRuntimeException ERROR
    com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Log ID: 00187177BCAA008D000000DD0000144C00043EE522456586
    Initial cause
    Message: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
    Stack trace: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    Message: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:216)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         ... 28 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 42 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 44 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    com.sap.ip.bi.base.exception.BIBaseRuntimeException ERROR
    com.sap.ip.bi.base.exception.BIBaseRuntimeException#
    #1.5#00187177BCAA0084000000120000144C00043EE523772516#1195053770252#com.sap.ip.bi.export.xfa.impl.PDFConverter#sap.com/irj#com.sap.ip.bi.export.xfa.impl.PDFConverter#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error##Plain###EXPORT XFA calcTemplate=Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out#
    #1.5#00187177BCAA0084000000130000144C00043EE523772FEE#1195053770252#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error##Plain###Exception caught: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:403)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:97)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:217)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:2735)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:2478)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2432)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2054)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:931)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:873)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:324)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 51 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 53 more
    #1.5#00187177BCAA0084000000140000144C00043EE523773518#1195053770252#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Fatal#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:403)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:97)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:217)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:2735)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:2478)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2432)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2054)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:931)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:873)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:324)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 49 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 51 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 53 more
    #1.5#00187177BCAA0084000000170000144C00043EE5237744D3#1195053770252#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/irj#com.sap.ip.bi.base.application.message.impl.MessageBase#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001#

    Hi Glenn,
    i faced the same problem
    did you solve yours meanwhile ?
    regards,
    Carsten

  • The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

    Hello, 
    See if any body may help here... I get this blue screen:
    RECOVERY
    Your PC needs to be repaired: 
    The Boot Configuration Data for your PC is missing or contains errors.
    file:\\EFI\Microsoft\Boot\BCD
    Error code: 0xc000014c
    You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
    Press Esc for UEFI Firmware Settings
    First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
    F1 System Information
    F2 System Diagnostics
    F9 Boot Device Options
    F10 BIOS Setup
    F11 System Recovery
    ENTER - Continue Startup.
    this is what happen when I click any of this options:
    F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly) 
    so I can't do anything, nothing at all!! crazzines. 
    So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.  
    This is an:
    HP ENVY TS Sleekbook 4
    PRODUCT NUMBER  D1A99UA#ABA
    SYSTEM BOARD ID: 1894
    Bios F.25 
    **** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen. 
    Any idea of what should I do? 
    Thanks in advance.
    This question was solved.
    View Solution.

    If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
    Install a new hard disk and then boot to the recovery flashdrive.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Configuration documents for Training and event management &apprisals?

    hello xperts
    can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

    Thanks for your suggestions.
    i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS.  appraisal has to done in the ECC only.
    Done the customization like this :
    created scales
    created appraisal model and assign the scales
    for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
    Now Appraiser (Manager) from APPCHANGE complete the appraisal.
    now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
    how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
    Please help in this requirement.
    Thanks and Best Regards,
    Praneeth kumar

  • How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

    I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
    I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
    Server 2008, and I'm running 2012.
    Any suggestions or tips on how I can begin testing this with Server 2012?

    Hi,
    You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
    If you need a sample .wcx file I have posted one here a couple of times.  If you want I will look for it and post a link.
    -TP
    I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work.  And I'm not sure what I would need to do with or how to create a .wcx file.
    When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to: 
    https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

  • How to configure mwi for GDM (general delivery mailbox)

    Hello everyone
    I'm trying to configure mwi for GDM and am not having much success. I tried a couple of different ways suggested in a discussion here:
    https://supportforums.cisco.com/message/3091135?tstart=0 but don't think I,m doing this the right way.
    This is what the thread states:
    x511 is a shared line with a corresponding GDM mailbox   (mine is x1007)
    x512 is a blast group with members x501 (phone A), x502 (phone B), and x503 (phone C)  *****I took 1008
    x511 is call forward all to 512
    The blast group at 512 forwards on no answer to voicemail
    x511 is assigned as a button on each of phones A, B & C
    When an incoming call comes in to x511 it is immediately forwarded to the blast group at 512, and as a result, x501, x502, and x503 ring.  After 15 seconds (or whatever the no answer timer is set to), the call goes to voicemail.  Because the call went to x511 first, it winds up in mailbox 511.  After the message is left, an MWI ON message is generated for x511, which results in the envelope icon being displayed next to the x511 button on each of phones A, B and C.
    Therefore If I change this to my configurations I think it would go like this:
    When an incoming call comes in to x1007(GDM) it is immediately forwarded to the blast group at 1008, and as a result, x1001, x1002, and x1003 and 1004 ring.  After 15 seconds (or whatever the no answer timer is set to), the call goes to voicemail.  Because the call went to x1007 first, it winds up in mailbox 1007.  After the message is left, an MWI ON message is generated for x1007, which results in the envelope icon being displayed next to the x1007 button on each of phones A, B and C.
    Here is what I tried:
    1: Configured GDM at extension 1007 and shared the extension to phones ext: 1001, 1002, 1003, 1004 (instead of above mentionned x511). This extension works and can retrieve GDM no problem.
    dial-peer voice 1007 voip
    description [-[ General Delivery Mailbox ]-]
    destination-pattern 1007
    session protocol sipv2
    session target ipv4:10.1.10.1
    dtmf-relay sip-notify
    codec g711ulaw
    no vad
    ephone-dn  8  dual-line
    number 1007 no-reg both
    label GeneralMail- x1007
    description General Mail
    name General Mailbox
    call-forward busy 1999                   *****Should call forward all to 1008 which is the hunt-group
    call-forward noan 1999 timeout 3    *****Should call forward all 1008. Therefore remove both commands and add the call-forward all 1008 (Correct???)
    hold-alert 30 originator
    2: Not sure what a blast group is but I believe it to be a parallel hunt group. Is this correct???
    ex: voice hunt-group 2 parallel (This will make all included phones dial at same time correct???)
          list 1001, 1002, 1003, 1004
    voice hunt-group 2 parallel
    list 1001,1002,1003,1004
    pilot ???  (not sure what to put here, i think it should be the pilot number 1008 correct???)
    pilot 1008
    Therefore this is what i got:
    voice hunt-group 2 parallel
    list 1001,1002,1003,1004
    pilot 1008
    Now I believe I need to create the dial-peer 1008 correct???
    dial-peer voice 1008 voip
    description [-[ Hunt Blast Group ]-]
    destination-pattern 1008
    session protocol sipv2
    session target ipv4:10.1.10.1
    dtmf-relay sip-notify
    codec g711ulaw
    no vad
    Next I think I have to create ephone-dn for the hunt blast group correct???
    ephone-dn  9  dual-line
    number 1008 no-reg both
    description General Mail
    name General Mailbox
    call-forward busy 1999                   *****Should call forward all to 1999 which is my voice mail correct???
    call-forward noan 1999 timeout 3    *****Should call forward all 1999 which is my voice mail correct ???
    hold-alert 30 originator
    Then last I would configure lines on the phones pointing to the ephone-dn 9 on all listed phones correct??? or am I totally lost?...lol
    ex: ephone  4
    device-security-mode none
    mac-address 0018.19B9.35BE
    username "operator" password 1234
    codec g729r8
    type 7961
    button  1:3 2:5 3:8 4:9  ***4:9 is the one correct???
    Any help will be greatly appreciated. Thanks very much.

    Thanks very much for the help Rob. This command does indeed take care of having my GDM
    light up but now if I try to send a message to the main phone line x1001 and leave a
    message it only has the enveloppe now and doesn't light up...lol
    It is a great command to know though...thanks a lot
    Any chance you know if I can have both the main line and the GDM light up when they receive messages in their respective extensions?
    ex:
    ephone 4
    device-security none
    mac-address aaaa.aaaa.aaaa
    username "operator"
    type 7961
    mwi-line 3   ****In my case this lights up the 1007 which is the GDM mailbox
    or
    mwi-line 1   ***now my main x will light up but not the GDM...lol
    button 1:3 2:5 3:8     ***Now for the personal mailbox
    ephone-dn  3  dual-line
    number 1003 no-reg primary
    label Operator-x1003
    description Operator
    name Sylvie Bombardier
    call-forward busy 1999
    call-forward noan 1999 timeout 10   ****worst comes to worst i'll get rid of the operator personal mailbox and call-forward all to GDM 1007 on that phone
    translation-profile incoming no-prefix
    Thanks very much again for your help. If you have any other ideas please feel free to add. I am definitely close to wrapping this issue. Funny cisco didn't configure GDM to also light up the phone extensions included in the GDM like the personal mailboxes when they receive messages.
    Thanks very much again for the help. I really appreciate it.

  • Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

    Hello, dear colleagues.
    We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info). 
    Send Message, Disconnect, Logoff options works only for users in Administrators group.
    I can't to configure permissions for Remote Desktop Users, specific user or AD group. 
    To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
    RDP-Tcp, Security tab, add specific user account , AD group or configure
    advanced permissions
    for Remote Desktop Users.  
    But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
    Thanks.
    P.S. If move specific user from Remote Desktop Users group to Administrators group on
    Windows Server 2012 R2 - it works. 

    Hi,
    You can prevent administrators from changing the permissions for a connection by applying the
    Do not allow local administrators to customize permissions Group Policy setting. 
    This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
    Apart there is one command with which you can set the permission for that check the related
    article. Additionally checkthis
    thread for more detail.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Configuring Maven for a new Project

    Could anyone provide inputs on how to configure Maven for a new project?
    I am referring to links
    http://maven.apache.org/guides/getting-started/index.html#How%20do%20I%20setup%20Maven?
    http://maven.apache.org/guides/mini/guide-creating-archetypes.html
    Rgds,
    seetesh

    We are introducing a new feature in Flex 2.0.1 that's due out
    early next year. The feature is called "Modules" and it was
    discussed at this year's MAX 2006. You can read more about it on
    Roger Gonzalez's blog:
    http://blogs.adobe.com/rgonzalez/
    - check the "Modular Applications" articles. I think this will go a
    long way to making the reusable parts you are talking about.
    Flex does not build things from instructions unless they are
    written in ActionScript. We have customers that do create dynamic
    interfaces based on data loaded from a database, so it is possible.
    But if you have pre-built templates and all you need to do is
    change certain aspects at runtime, it should be pretty easy with
    Flex. Take a look at the Flex documentation, especially the part
    about the Flex framework and how Flex sources are compiled into
    SWFs.
    You style Flex components using style sheets (CSS files).
    This also includes specifying skins for components if you decide to
    give something a whole new look.
    I'm a bit biased here, but I think using ColdFusion (version
    7.0.2) with Flex 2 is very easy. But it depends on your needs,
    budget, deployment, etc. WIth CF 7.0.2 and Flex Builder 2 you get
    wizards to be build both CFC (ColdFusion components) and matching
    ActionScript objects so that you exchange objects, not just data,
    between Flex and CF.
    WebServices can also be used (with CF, too). This gives you
    more choices to the backend. If you have a large amount of data or
    it is complex, consider Flex Data Services as that has data
    management capabilities.
    Flex 2 has localization capabilties. You create a 'resource
    bundle' in various languages and build SWFs for each one. When the
    end user choses their preference, take them to the page that loads
    the appropriate SWF.
    HTH

  • Error message while creating configurable material for variant configuration.

    Dear All,
    I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the material type configurable materials as well in using external number also. Can anyone specify the steps to be done in creating the configurable material. Thank you all.
    Regards
    Akula Sivaji Kumar Madhu Kiran

    If you want to set these material type to another group (Which has a internal number and external number range), then you can do it.
    In MMNR, Click on the Edit Group.
    Then select the material type and click select element.
    Then mark a tick option in another group and then press Element/Group.
    Then you can see the material type will come under this group.
    Now save your entry, and create a material with this material type.

  • Configuration file for smart view for Hyperion planning

    Hi,
    We are using SmartView for accessing HyperionPlanning application. Please let me know how can we change the provider to use shared services and enable planning it for logging to file. Also which properties file is used for these configurations and where can we locate the configuration file on Hyperion planning installation system.
    Please suggest.
    Thanks
    Edited by: user11189447 on Aug 12, 2010 8:17 AM

    Hi,
    Checkout the below metalink from Oracle.
    Hyperion Strategic Finance Will Not Connect Via SmartView (Doc ID 1561484.1)
    Below Solution  as per doc ---
    1. Run the installation for the HSF Web Application component on the Foundation server where weblogic is for HSF Server.
    (Be sure the HSF Web Application component is also installed on the the HSF Server, if separate from the Foundation server as well.)
    2. Clean up any failed deployments in the WebLogic Console by deleting the HSFWeb Server from WL Admn
    3. Configure the new component on Foundation (target server).
    4. On OHS server run configtool and perform the WebServer config task to configure OHS for HSFweb
    5. Restart OHS and start HSFWeb
    Thanks,
    ~KKT~

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

Maybe you are looking for

  • How do I get the values from a selected row.

    I am using JDeveloper 9.0.5. On my page, I have placed a button within a table. The button has been assigned an event. The event is within my Action class. This class implements DataAction and has overriden the processComponentEvents(DataActionContex

  • My ipod classic no longer syncs

    My iPod no longer syncs with iTunes

  • Extracting Directory Structure of System

    Please someone let me know that how can i extract the Directory Structure of the system (on which the application is running) in Java. and then how can i display it in the Jtree . The requirement is just like that of Windows Explorer. In the Explorer

  • No video files

    have lost all video files on my ipod classic i have re installed itunes and re set ipod .the ipod sync's ok showing both audio & video on status bar at bottom of screen. shows sync complete safe to eject when you check ipod it says no video or tv fil

  • XML sql query not displayed using SQLPLUS

    Have a registered schema and 1 xml document successfully inserted using Oracle 10.2.0.3.0 I then run the following query: select extract(object_value,'/warehouse/warehousename')from xwarehouses; Expecting 1 record to be returned in SQLPLUS but get th