CONFIGURE NFS ON SOLARIS ZONES
I want steps to configure NFS on solaris Zones
Hi,
I installed unfs3 in zone, but can't mount unfs3 share from solaris client(Solaris 10 10/08 s10s_u6wos_07b SPARC):
root@prod-db $ mount -F nfs -o rw 192.168.219.13:/software /mnt
nfs mount: 192.168.219.13: : RPC: Rpcbind failure - RPC: Authentication error
nfs mount: retrying: /mnt
nfs mount: 192.168.219.13: : RPC: Rpcbind failure - RPC: Authentication error....
Any suggestions? I cant find in internet any forum or mailing list about unfs3 :(
Similar Messages
-
Zfs core dumps in Solaris Zones after patchcluster installation
Hi
I've installed the recommended patch cluster for Solaris 10 (SPARC) on my T2000 Server.
Now after the reboot all the Solaris Zones (got about 10 of them) instantly do zfs core dumps when their booted.
Some Output:
Dec 15 15:34:43 XXXXX genunix: NOTICE: core_log: zfs[1711] core dumped: /var/core/core_XXXXXX_zfs_0_0_1292423682_1711
bash-3.00# svcs
STATE STIME FMRI
online 13:58:50 svc:/system/svc/restarter:default
online 13:58:51 svc:/system/filesystem/root:default
online 13:58:51 svc:/network/loopback:default
online 13:58:53 svc:/network/pfil:default
online 13:58:54 svc:/system/installupdates:default
online 13:58:55 svc:/system/boot-archive:default
online 13:58:56 svc:/network/physical:default
online 13:58:57 svc:/system/filesystem/usr:default
online 13:58:57 svc:/system/identity:node
online 13:58:58 svc:/system/device/local:default
online 13:58:58 svc:/system/keymap:default
online 13:58:58 svc:/milestone/devices:default
online 13:58:58 svc:/system/filesystem/minimal:default
online 13:58:58 svc:/system/rmtmpfiles:default
online 13:58:58 svc:/system/cryptosvc:default
online 13:58:59 svc:/system/identity:domain
online 13:58:59 svc:/system/name-service-cache:default
online 13:58:59 svc:/system/coreadm:default
online 13:58:59 svc:/network/ipsec/ipsecalgs:default
online 13:58:59 svc:/application/print/ppd-cache-update:default
online 13:58:59 svc:/network/ipsec/policy:default
online 13:59:00 svc:/milestone/network:default
online 13:59:00 svc:/network/initial:default
online 13:59:00 svc:/system/manifest-import:default
online 13:59:00 svc:/network/service:default
online 13:59:00 svc:/milestone/single-user:default
online 13:59:00 svc:/network/dns/client:default
online 13:59:00 svc:/network/routing-setup:default
online 13:59:00 svc:/milestone/name-services:default
online 13:59:03 svc:/milestone/sysconfig:default
online 13:59:03 svc:/system/utmp:default
online 13:59:03 svc:/system/console-login:default
offline 13:58:51 svc:/system/sysidtool:net
offline 13:58:51 svc:/network/rpc/bind:default
offline 13:58:51 svc:/system/sysidtool:system
offline 13:58:52 svc:/network/nfs/status:default
offline 13:58:52 svc:/network/nfs/nlockmgr:default
offline 13:58:52 svc:/network/nfs/cbd:default
offline 13:58:52 svc:/network/nfs/mapid:default
offline 13:58:52 svc:/network/inetd:default
offline 13:58:52 svc:/network/nfs/client:default
offline 13:58:52 svc:/system/filesystem/autofs:default
offline 13:58:53 svc:/system/system-log:default
offline 13:58:53 svc:/network/smtp:sendmail
offline 13:58:53 svc:/system/cron:default
offline 13:58:53 svc:/milestone/multi-user:default
offline 13:58:54 svc:/application/management/snmpdx:default
offline 13:58:54 svc:/application/management/dmi:default
offline 13:58:54 svc:/application/management/seaport:default
offline 13:58:54 svc:/network/ssh:default
offline 13:58:54 svc:/milestone/multi-user-server:default
offline 13:58:54 svc:/application/font/fc-cache:default
offline 13:58:55 svc:/application/management/sma:default
offline 13:58:58 svc:/system/sac:default
offline 13:59:00 svc:/network/shares/group:default
offline 13:59:00 svc:/system/boot-archive-update:default
maintenance 15:34:43 svc:/system/filesystem/local:default
uninitialized 13:58:52 svc:/network/rpc/gss:default
uninitialized 13:58:54 svc:/application/font/stfsloader:default
uninitialized 13:58:55 svc:/network/rpc/rstat:default
uninitialized 13:58:55 svc:/application/print/rfc1179:default
uninitialized 13:58:55 svc:/application/x11/xfs:default
uninitialized 13:58:55 svc:/network/finger:default
uninitialized 13:58:55 svc:/network/ftp:default
uninitialized 13:58:56 svc:/network/login:rlogin
uninitialized 13:58:56 svc:/network/nfs/rquota:default
uninitialized 13:58:56 svc:/network/rpc/rusers:default
uninitialized 13:58:56 svc:/network/rpc/smserver:default
uninitialized 13:58:57 svc:/network/security/ktkt_warn:default
uninitialized 13:58:57 svc:/network/shell:default
uninitialized 13:58:57 svc:/network/telnet:default
uninitialized 13:58:58 svc:/network/rpc-100235_1/rpc_ticotsord:default
uninitialized 13:58:58 svc:/network/rpc/cde-calendar-manager:default
uninitialized 13:58:59 svc:/network/rpc/cde-ttdbserver:tcp
bash-3.00# svcs -x
svc:/system/filesystem/local:default (local file system mounts)
State: maintenance since Wed Dec 15 15:34:43 2010
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-filesystem-local:default.log
Impact: 24 dependent services are not running. (Use -v for list.)
svc:/network/rpc/gss:default (Generic Security Service)
State: uninitialized since Wed Dec 15 13:58:52 2010
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: gssd(1M)
Impact: 11 dependent services are not running. (Use -v for list.)
svc:/network/rpc/rstat:default (kernel statistics server)
State: uninitialized since Wed Dec 15 13:58:55 2010
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: rpc.rstatd(1M)
See: rstatd(1M)
Impact: 1 dependent service is not running. (Use -v for list.)
bash-3.00# cat /var/svc/log/system-filesystem-local:default.log
[ Jul 10 03:41:35 Enabled. ]
[ Jul 10 03:43:45 Rereading configuration. ]
[ Jul 10 03:44:17 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 03:44:18 Method "start" exited with status 0 ]
[ Jul 10 12:44:36 Enabled. ]
[ Jul 10 12:44:45 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 12:44:45 Method "start" exited with status 0 ]
[ Jul 10 12:45:03 Enabled. ]
[ Jul 10 12:45:09 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 12:45:09 Method "start" exited with status 0 ]
[ Jul 10 13:54:39 Enabled. ]
[ Jul 10 13:54:46 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 13:54:46 Method "start" exited with status 0 ]
[ Jul 18 12:34:19 Enabled. ]
[ Jul 18 12:34:27 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 18 12:34:27 Method "start" exited with status 0 ]
[ Jul 18 17:29:08 Enabled. ]
[ Jul 18 17:29:15 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 18 17:29:15 Method "start" exited with status 0 ]
[ Jul 19 11:13:34 Enabled. ]
[ Jul 19 11:13:42 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:13:42 Method "start" exited with status 0 ]
[ Jul 19 11:32:23 Enabled. ]
[ Jul 19 11:32:30 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:32:31 Method "start" exited with status 0 ]
[ Jul 19 11:57:06 Enabled. ]
[ Jul 19 11:57:13 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:57:13 Method "start" exited with status 0 ]
[ Jul 19 12:40:05 Enabled. ]
[ Jul 19 12:40:12 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 12:40:12 Method "start" exited with status 0 ]
[ Jul 20 15:51:46 Enabled. ]
[ Jul 20 15:51:54 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 20 15:51:54 Method "start" exited with status 0 ]
[ Jul 24 11:42:17 Enabled. ]
[ Jul 24 11:42:25 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 24 11:42:25 Method "start" exited with status 0 ]
[ Jul 27 12:05:06 Stopping because service disabled. ]
[ Jul 27 12:05:07 Executing stop method (null) ]
[ Jul 27 12:13:10 Enabled. ]
[ Jul 27 12:13:17 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 27 12:13:17 Method "start" exited with status 0 ]
[ Jul 27 13:10:26 Stopping because service disabled. ]
[ Jul 27 13:10:26 Executing stop method (null) ]
[ Jul 27 13:18:19 Enabled. ]
[ Jul 27 13:18:26 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 27 13:18:26 Method "start" exited with status 0 ]
[ Jul 31 10:12:31 Enabled. ]
[ Jul 31 10:12:38 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 31 10:12:39 Method "start" exited with status 0 ]
[ Aug 7 10:08:52 Stopping because service disabled. ]
[ Aug 7 10:08:52 Executing stop method (null) ]
[ Aug 7 10:34:50 Enabled. ]
[ Aug 7 10:34:57 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 7 10:34:58 Method "start" exited with status 0 ]
[ Aug 9 09:14:50 Stopping because service disabled. ]
[ Aug 9 09:14:50 Executing stop method (null) ]
[ Aug 9 09:55:03 Enabled. ]
[ Aug 9 09:55:10 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 9 09:55:11 Method "start" exited with status 0 ]
[ Aug 16 10:46:43 Enabled. ]
[ Aug 16 10:46:50 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 10:46:50 Method "start" exited with status 0 ]
[ Aug 16 12:06:56 Enabled. ]
[ Aug 16 12:07:02 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 12:07:02 Method "start" exited with status 0 ]
[ Aug 16 13:45:10 Enabled. ]
[ Aug 16 13:45:16 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 13:45:16 Method "start" exited with status 0 ]
[ Aug 16 14:36:59 Enabled. ]
[ Aug 16 14:37:07 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 14:37:07 Method "start" exited with status 0 ]
[ Aug 16 15:00:40 Enabled. ]
[ Aug 16 15:00:47 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 15:00:47 Method "start" exited with status 0 ]
[ Aug 22 16:00:13 Enabled. ]
[ Aug 22 16:00:21 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 22 16:00:21 Method "start" exited with status 0 ]
[ Aug 23 09:49:04 Enabled. ]
[ Aug 23 09:49:10 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 09:49:11 Method "start" exited with status 0 ]
[ Aug 23 09:49:23 Stopping because service disabled. ]
[ Aug 23 09:49:23 Executing stop method (null) ]
[ Aug 23 10:04:13 Enabled. ]
[ Aug 23 10:04:20 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 10:04:20 Method "start" exited with status 0 ]
[ Aug 23 10:06:57 Enabled. ]
[ Aug 23 10:07:04 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 10:07:05 Method "start" exited with status 0 ]
[ Oct 23 08:43:05 Enabled. ]
[ Oct 23 08:43:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Oct 23 08:43:14 Method "start" exited with status 0 ]
[ Nov 21 14:51:50 Enabled. ]
[ Nov 21 14:51:58 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Nov 21 14:51:59 Method "start" exited with status 0 ]
[ Nov 29 15:33:19 Enabled. ]
[ Nov 29 15:33:26 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Nov 29 15:33:27 Method "start" exited with status 0 ]
[ Dec 18 13:37:35 Enabled. ]
[ Dec 18 13:37:42 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 18 13:37:42 Method "start" exited with status 0 ]
[ Dec 19 08:48:07 Enabled. ]
[ Dec 19 08:48:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:48:14 Method "start" exited with status 0 ]
[ Dec 19 08:56:07 Enabled. ]
[ Dec 19 08:56:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:56:14 Method "start" exited with status 0 ]
[ Dec 19 08:57:41 Enabled. ]
[ Dec 19 08:57:48 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:57:48 Method "start" exited with status 0 ]
[ Feb 1 10:39:48 Enabled. ]
[ Feb 1 10:39:55 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 1 10:39:56 Method "start" exited with status 0 ]
[ Feb 8 11:12:50 Enabled. ]
[ Feb 8 11:12:57 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 8 11:12:57 Method "start" exited with status 0 ]
[ Jun 6 10:08:34 Enabled. ]
[ Jun 6 10:08:44 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jun 6 10:08:46 Method "start" exited with status 0 ]
[ Aug 8 09:45:48 Enabled. ]
[ Aug 8 09:46:35 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 8 09:46:36 Method "start" exited with status 0 ]
[ Aug 14 17:53:59 Enabled. ]
[ Aug 14 17:54:06 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 14 17:54:06 Method "start" exited with status 0 ]
[ Aug 14 17:55:20 Enabled. ]
[ Aug 14 17:55:27 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 14 17:55:27 Method "start" exited with status 0 ]
[ Aug 18 15:19:17 Enabled. ]
[ Aug 18 15:19:24 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 18 15:19:24 Method "start" exited with status 0 ]
[ Aug 29 12:56:48 Enabled. ]
[ Aug 29 12:56:55 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 29 12:56:55 Method "start" exited with status 0 ]
[ Oct 13 11:59:43 Enabled. ]
[ Oct 13 11:59:50 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Oct 13 11:59:51 Method "start" exited with status 0 ]
[ Feb 26 16:47:00 Enabled. ]
[ Feb 26 16:47:07 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 26 16:47:07 Method "start" exited with status 0 ]
[ Apr 14 15:54:17 Enabled. ]
[ Apr 14 15:54:24 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Apr 14 15:54:25 Method "start" exited with status 0 ]
[ Aug 28 08:49:58 Stopping because service disabled. ]
[ Aug 28 08:49:58 Executing stop method (null) ]
[ Aug 28 08:52:54 Enabled. ]
[ Aug 28 08:53:01 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 28 08:53:01 Method "start" exited with status 0 ]
[ Aug 28 09:08:20 Stopping because service disabled. ]
[ Aug 28 09:08:20 Executing stop method (null) ]
[ Sep 1 16:05:36 Enabled. ]
[ Sep 1 16:06:05 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 16:06:05 Method "start" exited with status 0 ]
[ Sep 1 19:29:19 Enabled. ]
[ Sep 1 19:29:27 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 19:29:27 Method "start" exited with status 0 ]
[ Sep 1 23:04:00 Enabled. ]
[ Sep 1 23:04:08 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 23:04:08 Method "start" exited with status 0 ]
[ Sep 2 00:23:41 Stopping because service disabled. ]
[ Sep 2 00:23:42 Executing stop method (null) ]
[ Sep 2 00:46:46 Enabled. ]
[ Sep 2 00:46:53 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 2 00:46:54 Method "start" exited with status 0 ]
[ Sep 26 12:04:34 Enabled. ]
[ Sep 26 12:04:41 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 26 12:04:42 Method "start" exited with status 0 ]
[ Oct 20 13:05:09 Stopping because service disabled. ]
[ Oct 20 13:05:10 Executing stop method (null) ]
[ Oct 20 13:24:01 Enabled. ]
[ Oct 20 13:24:08 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 20 13:24:09 Method "start" exited with status 0 ]
[ Oct 21 16:30:59 Enabled. ]
[ Oct 21 16:31:09 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 16:31:09 Method "start" exited with status 0 ]
[ Oct 21 16:32:42 Stopping because service disabled. ]
[ Oct 21 16:32:42 Executing stop method (null) ]
[ Oct 21 16:42:05 Enabled. ]
[ Oct 21 16:42:15 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 16:42:15 Method "start" exited with status 0 ]
[ Oct 21 17:27:37 Enabled. ]
[ Oct 21 17:27:47 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 17:27:47 Method "start" exited with status 0 ]
[ Oct 22 11:08:34 Enabled. ]
[ Oct 22 11:08:43 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 22 11:08:43 Method "start" exited with status 0 ]
[ Dec 9 09:17:33 Stopping because service disabled. ]
[ Dec 9 09:17:33 Executing stop method (null) ]
[ Dec 10 11:47:14 Enabled. ]
[ Dec 10 11:47:24 Executing start method ("/lib/svc/method/fs-local") ]
[ Dec 10 11:47:25 Method "start" exited with status 0 ]
[ Dec 15 10:52:25 Stopping because service disabled. ]
[ Dec 15 10:52:25 Executing stop method (null) ]
[ Dec 15 12:42:16 Enabled. ]
[ Dec 15 12:42:26 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 12:42:28 Method "start" exited with status 95 ]
[ Dec 15 13:13:19 Enabled. ]
[ Dec 15 13:13:28 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 13:13:30 Method "start" exited with status 95 ]
[ Dec 15 13:58:51 Enabled. ]
[ Dec 15 13:59:00 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 13:59:03 Method "start" exited with status 95 ]
[ Dec 15 15:34:41 Leaving maintenance because clear requested. ]
[ Dec 15 15:34:41 Enabled. ]
[ Dec 15 15:34:41 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 15:34:43 Method "start" exited with status 95 ]
bash-3.00# /usr/sbin/zfs mount -a
internal error: Unknown error
Abort (core dumped)
Before that I've installed the patch cluster with halted solaris zones which produced following output:
Application of patches finished : 2010.12.15 12:08:43
Following patches were applied :
119254-77 119812-10 125719-31 140159-03 142911-01
141588-04 119900-11 125731-05 142292-01 142933-02
142251-02 119906-16 126206-05 141444-09 142909-17
118666-28 120460-17 126363-08 141500-07 143140-04
118667-28 121012-03 126365-16 141502-02 143502-01
118777-16 121308-20 126868-04 141506-09 143506-01
140860-02 122212-40 127724-02 141514-02 143615-02
119059-56 122261-03 136998-09 141518-12 143731-01
119213-23 122675-05 137000-07 141552-03 143733-01
124628-10 123003-04 137080-05 141558-01 143977-01
119252-29 123590-12 137147-06 141586-01 144053-04
119280-23 123893-22 138195-04 141590-02 144106-01
124188-03 124393-11 138822-07 141874-09 144254-01
120199-15 124457-02 138826-07 141876-07 144488-04
119534-19 124630-42 138880-02 142084-04 144492-01
120272-28 125215-03 139099-04 142397-01 145124-01
119757-18 125388-03 139620-01 142529-01 145796-01
119783-15 125555-07
Following patches were skipped :
Patches already applied
120900-04 119063-01 119810-05 123005-07 137093-01
121133-02 119081-25 119986-03 124444-01 138866-03
119317-01 119130-33 120061-02 124939-03 137137-09
121296-01 123611-04 120201-05 124943-01 137871-02
138215-01 140899-01 120292-02 124997-01 138181-01
127884-01 122640-05 120329-02 125279-05 138361-01
118712-23 126897-02 121975-01 125539-06 138373-02
118918-24 127755-01 120719-02 125891-01 138647-01
138217-01 125503-02 120830-06 126440-01 141016-01
119578-30 125547-02 121095-02 126540-02 139555-08
121453-02 140796-01 121606-04 127127-11 139967-01
121453-02 120011-14 124171-07 136882-02 140455-01
121118-16 139520-02 123630-03 137032-01 140563-01
118833-36 119764-06
Patches obsoleted by one or more patches already applied
118731-01 124204-04 122660-10
Patches not applicable to packages on the system
121181-03 120410-33 121211-02 125533-15 143317-03
119115-35 120412-11 122259-03 125541-06 143510-01
119117-52 120414-27 122470-03 125952-20 143725-01
119315-19 120543-21 122911-24 137004-08 143727-01
119548-14 120739-06 122958-06 138387-01 143739-01
119903-02 120811-09 123938-02 138824-07 144325-01
120094-30 120849-04 125136-24 138876-01 145006-02
120185-21 121104-11 125137-24 139986-01 145080-01
119368-04 121136-02 125332-14 142244-02 145200-01
120286-03
Installation of patch set complete. PLEASE REBOOT THE SYSTEM.
when i tried to reboot the system by init 6 the service iscsi hanged and produced syslog errors about a unkown iocall -> killed the process. System rebooted w/o errors.
Does anyone have got an idea how to find out which patch or whatever do produce these errors?Hi,
I'm having the same issue of diskmon core dumps after upgrading grid and database from 11.2.0.1 to 11.2.0.2 on Solaris 10 x86-64. Following this thread, I'm trying to deinstall the Oracle 11.2.0.1 grid home.
I answered the following questions asked by the grid deinstall tool:
1. ASM configuration was not detected in this Oracle home. Was ASM configured in this Oracle home (y|n): y
2. Specify the ASM Diagnostic Destination: /db01/app/oracle/diag/asm/+ASM
3. Specify the diskgroups that are managed by this ASM instance: DATA FRA
4. De-configuring ASM will drop all the diskgroups at cleanup time. Do you want deconfig tool to drop the diskgroups:
If I answer no to question 1, the tool exits with error.
How do I answer question #4? (confused about this question of dropping diskgroups, it's already been upgraded)
Deinstall of Oracle db Home 11.2.0.1 was successful.
The +ASM instance has been upgraded and is running fine under 11.2.0.2 except for the excessive diskmon core dumps.
Thanks,
Lisa
Edited by: user12018917 on Apr 19, 2011 10:21 AM -
EM 12c and Solaris Zone Monitoring
Hi all,
I am using Oracle EM 12c to monitor Oracle database server which run on Solaris zone, which is capped to run using only 4 cores.
BUT the Host management home page is still showing "Total Cores" of 8 (I am using Sun T4-1).
Is there some configuration which required to be done to reflect the number of capped CPU.
Also is there a way to isolate the CPU, Memory, Filesystem and Network utilization to only look at the local zone?
I suspect what I see now represent the resource utilization of the physical machine.
Thank you.
-JoelLoc,
I've opened quite a few SRs, some handled well, some not. My biggest issue perhaps is that SRs are needed at all. We are a small shop that relied on OEM 10.2 for a long time, skipped over 11G and went right to 12R2. It was a culture shock, and I'm not sure if skipping the version added to our woes.
There are 3 DBAs here, with Oracle experience between 13 and 18 years, we are not newbies. I took the em12c class from Oracle.
But still, acceptance of its use has not been high, mostly because it's no longer the quick, targeted place we 'go to'. It's a huge product now, with much built-in. We are finding we need a mind adjustment to use it and the transition period related to how much time we can spend on that. Our intent, though, was to make things easier, not harder.
Case in point is our implementation of DataGuard. This project was new to us and I made EM12C upgrade as a predecessor project because I needed its help. I ultimately abandoned it, we hired a consultant, we learned manual steps, and that's what we use today. Everything is homegrown.
I feel as through the purpose for EM moved from a DBA monitoring tool. Remember OEM 10.2 and its initial summary page that showed the overall health of everything on one shot? I can't do that in em12c, or at least haven't found that.
Here are some SRs:
SR 3-6392247151
Sr 3-7159111371
SR 3-6645421051
* SR 3-6608820051
SR 3-6667182071
* Covers "invalid objects" missing, something we previously relied on.
Back to the original question of this post - I understand now that if we use EM to switch our databases, the role reversal will show. We would have loved to rely on EM for everything. Now that we must do everything manually, I have to then manually drop the target being monitored and re-add it. Again, something that should make our jobs easier is now harder.
Thanks for listening. Am I really the only DBA that says EM12C is harder to use for basic functionality?
Sherrie -
Access manager installation on solaris zone
Hi
I have installed the Access manager 7.0, Sun java system app server 8.1, Sun sirectory server 5.2 through JES installer on solaris 10 zone AM55-zone. Installer summarry is below, which shows installtion complete without error, but I am not able to launch the amserver login page.
Any suggestion, what I did wrong? any thoughts?
Sid
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
Your next step is to perform the postinstallation configuration and
verification tasks documented in the Postinstallation Configuration and Startup
Chapter of the Sun Java(TM) Enterprise System Installation Guide. See: http:
//docs.sun.com/doc/819-2328.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installed
Sun Java(TM) System Message Queue 3 2005Q4 Enterprise Edition : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 : Installed
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server 5 2005Q4 : Installed
Sun Java(TM) System Access Manager 7 2005Q4 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 :
Domains and Instance Configuration Directory : /var/opt/SUNWappserver
Application Server Installation Directory : /opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server 5 2005Q4 :
Directory Server Admin User : admin
Directory Server Manager : cn=Directory Manager
Directory Server Identifier : AM55-zone
Directory Server Port : 389
Directory Server Root Suffix : dc=ipsolutionshowcase,dc=com
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Directory Server Administration Domain : ipsolutionshowcase.com
System User : root
System Group : root
Existing Configuration Directory : 0
Configuration Directory Host : AM55-zone.ipsolutionshowcase.com
Configuration Directory Port : 389
Configuration Directory Admin User : admin
Existing User Directory : 0
User Directory Host : AM55-zone.ipsolutionshowcase.com
User Directory Port : 389
User Directory Admin User : admin
User Directory Suffix : dc=ipsolutionshowcase,dc=com
Disable Schema Checking : 0
Add Sample Entries : 0
Populate Database : 1
Sun Java(TM) System Access Manager 7 2005Q4 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory :
/opt/SUNWappserver/appserver
Document Root : /var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : AM55-zone.
ipsolutionshowcase.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : AM55-zone.ipsolutionshowcase.com
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .ipsolutionshowcase.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : AM55-zone
Access Manager Directory Server Host : AM55-zone.ipsolutionshowcase.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=ipsolutionshowcase,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
<--[100%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} !
You have new mail in /var/mail/root
bash-3.00#
bash-3.00# cd /var/opt/mps/serverroot/slapd-AM55-zone
bash-3.00# ./start-slapdThanks samk,
After the installation, I have started the Directory server,admin,and console with following commands:
bash-3.00# directoryserver start
bash-3.00# directoryserver start-admin
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
warning: daemon is running as super-user
[LS ls1] http://AM55-zone.ipsolutionshowcase.com <http://AM55-zone.ipsolutionshowcase.com> , port 390 ready to accept requests
startup: server started successfully
bash-3.00# directoryserver startconsole
Recieved the Login console window,logged in and got the ipsolutionshowcase tree.
What are the next steps I need to folow in order to launch the Access Manager page?
Ant thoughts?
Thanks for ye help
Sid -
Install and configuring SAMBA in Solaris 8.0
Hi
Can any one help tme to install and configure SAMBA on solaris 8.0
Thanks in advanceWe don't provide sudo for Solaris 8, but you can try with the package available there : http://www.sudo.ws/sudo/download.html#binary
They don't provide a specific package for Solaris 8 but may be will the binary working correctly in your zone.
An other package, and is builded for Solaris 8, is available on www.sunfreeware.com website.
Regarding the configuration, the method can differ depending on which version you will use. You can find a lot of examples on Internet if you want for details. -
Hi,
Does anybody have any experience of running OSB inside a Solaris zone?
I'm experimenting with this at the moment and would like to share the OSB installation with the global zone, but keep the /usr/etc and /usr/tmp directories where the host-specific stuff is stored private.
Thanks.I following Oracle® Secure Backup Installation and Configuration Guide
Release 10.3 :
- To Viewing SCSI Bus Name-Instance Parameter Values in Solaris :
# cd /usr/local/oracle/backup/install
# installdriver
bash: installdriver: command not found
# ./installdriver
case: Too many arguments
How could i can run the installdriver script for SCSI information
Best Regards
Ch -
Configure NFS v4 to support CIFS
Hi,
May I know how can I configure NFS v 4 on Solaris 10 to support CIFS?
Thanks!Hi,
servername:/NFSShare_Name should work.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Are Solaris Zones approved for SAP production environments?
All,
I am trying to find an official document from SAP that confirms that Solaris Zones are approved for use in SAP NW production environments. I checked the product availability matrix but it does not address Containers or Zones.
Thanks,
GuentherThey don't state it explicitly because you can use it. I comes with the operating system and if they would deny that, there would a be a note stating that explicitly.
On top of that, SAP would not create notes how to install and configure a zone if it wouldn't be supported
We run many instances under zones (production, test, sandbox) and make use of ZFS heavily and it works like a charm.
Markus
root@consbig / >zoneadm list -vi
ID NAME STATUS PATH
0 global running /
4 crmtest running /zone/crmtest
5 crmqual running /zone/crmqual
6 srmtest running /zone/srmtest
7 solmgrt running /zone/solmgrt
8 epjava running /zone/epjava
124 tdmshost running /zone/tdmshost
128 nwdi_ext_1 running /zone/nwdi_ext_1
148 icht running /zone/icht
204 scheduler running /zone/scheduler
217 ichp running /zone/ichp
220 appl2mp1 running /zone/appl2mp1
221 solmgrt running /zone/solmgrt
236 output running /zone/output
252 bicopy running /zone/bicopy
267 kerberos running /zone/kerberos
289 spnego running /zone/spnego
root@consbig / >zpool iostat
capacity operations bandwidth
pool used avail read write read write
dbdata 4,73T 64,1G 68 6 8,34M 430K
dblog 34,6G 15,2G 0 16 62,1K 123K
usrsap 118G 80,9G 2 26 188K 157K
zone 54,7G 44,8G 0 31 56,1K 135K -
Req: Checkpointing Disks for Solaris Zones
Is there a way using Solaris Zones to checkpoint a disk? I would like to be able to carry out a series of experiments on a test system and start from an identical configuration each time. VMWare calls this capability "Disk checkpointing," and Solaris Zones appears to somewhat resemble VMWare.
Hi,
since the SCOM Agent is not 'cluster aware' you probably have no other choice than restarting the agent and wait for the next discovery cycle of the solaris logical disks. You can speed this up by manually override the discovery interval for that specific
server. After that the disk is not longer monitored.
If you have the time and knowledge you could set up a custom monitoring for clustered filesystems and disable the standard monitoring for that filesystems. But I think thats quite time-consuming. We have the same issues here with our Solaris and Linux clustered/shared
filesystems but we still live with the workaround of restarting the agent.
Regards -
Configuring IPMP with several zones
I am trying to configure IPMP with 2 zones on Solaris 10 but it seems that an interface has failed.
ce1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,Failed> mtu 1500 index 3
inet 10.177.6.91 netmask ffffff00 broadcast 10.177.6.255
groupname zone1
ether 0:14:4f:24:87:c1
ce1:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
zone v08k39-zone1
inet 10.177.6.90 netmask ffffff00 broadcast 10.177.6.255
ce5: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 6
inet 10.177.6.92 netmask ffffff00 broadcast 10.177.6.255
groupname zone1
ether 0:14:4f:24:87:c5
root@sys # cat hostname.ce1
sys-zone1-test1 deprecated -failover netmask + broadcast + group zone1 up
root@sys # cat hostname.ce5
sys-zone1-test2 deprecated -failover netmask + broadcast + group zone1 up
Is the IPMP configuration correct or can i do away with link checking...
TIA177499-02 wrote:
Hi can you tell me how to configure IPMP in solaris 10
following are the steps which i havae followed.
root@sun4401:/> cat /etc/hostname.ce0
sun4401netmask + broadcast + group ipmp0 up
root@sun4401:/> cat /etc/hostname.ce1
group ipmp0 up
hosts file entrie are also proper, i don't know eher is the problem.
and after that taken a reboot.
Thanks
gopalYou're missing the second configuration line on your "primary" interface.
addif IPMP-hostname netmask + broadcast + up -
How to mount NFS into a zone or how to use the same IP in every zone?
Hi,
we are using a NFS server in a different subnet (= different network interface; nxge1) than our 'normal' network (= nxge0).
Now I want to mount serveral NFS directories into our zones.
First I thought the follwoing is possible:
In the global zone I just mount the filesystem into its place:
mount 10.11.3.1:/vol/vol_nfs_zones/zoneNNN_mnt /zones/zoneNNN/root/mnt
When the zone is halted this mount works, but when I start the zone, I receive the error:
# zoneadm -z zoneNNN boot
zoneadm: zone 'zoneNNN': These file-systems are mounted on subdirectories of /zones/zoneNNN/root:
zoneadm: zone 'zoneNNN': /zones/zoneNNN/root/mnt
zoneadm: zone 'zoneNNN': call to zoneadmd failed
When zoneNNN is already running and I try to mount it, I receive
nfs mount: mount: /zones/zoneNNN/root/mnt: Device busy
So the question is: How do I mount something in the gloabl zone from a NFS server into a zone?
The only alternative I see is to make the interface nxge1 available in every zone and give each an own IP in our storage network... But sadly this isn't an alternative because we don't have so many free IPs in that net! (Or is there a trick to use the same IP in the global and non-global zones for only this interface??)
Does anyone have a solution for our problem? I cannot believe that SUN misses this!
Any hints are more than welcome!Mounting it by NFS in the global zone and trying to add this by the "add fs" and "type=lofs"-option yields to an error, when installing the zone:
cannot verify fs /data: NFS mounted file-system.
A local file-system must be used.
zoneadm: zone zoneNNN failed to verifyOur storage network is not accessable from other nets. (And I think it is a very bad idea to route storage network traffic...)
So I think we def. have to increase our storage network. :-( -
How to configure CUPS in Solaris 10 X86 and SPARC
Dears,
I need help in configuring CUPS for Solaris 10 X86 as well as on SPARC.
What i did?
Downloaded the CUPS 1.5.0
read the readme.txt
read the INSTALL.txt
Pre-req installation requires :-
CFLAGS= -i /some/directory \
CPPFLAGS = -i /some/directory \
CXXFLAGS = -I /some/directory \
DSOFLAGS = -L /some/directgry \
LDFLAGS = -L /some/directory \
./configure --
It errors out with
checking for gawk ... no
checking for mawk... no
checking for nawk ...nawk
chekcing for gcc ... no
checking for cc ... no
checking for cl.exe no
Configure error: no acceptable C compiler found in $PATH
see 'config.log' for more details
I installed all the missing dependencies from www.sunfreeware.com and I have the same problem.
I also tried to install the software packages from the operating system dvd... like for
ls -lrt gcc
gcc "SUNWgcc", "SUNWgccS", "SUNWgccruntime"
ls -lrt cc
cc "SUNWgccruntime", "SUNWlccom", "SUNWcctpx", "SUNWccisgn" , "SUNWccinv", "SUNWccfwctrl", " SUNWccfw", "SUNWccccrr", "SUNWccccr", "SUNWccccfg", "SUNWislcc",
"SUNWaccu", "SUNWaccr", "IPLTccons", " SUWgccs", "SUNWgcc", "SUNWmccom", "SUNWmcc", "SUNWusbccids", "SUNWusbccid"
ls -lrt gawk
no results
ls -lrt mawk
no results
ls -lrt cl.exe
no results
Is there any way should i follow apart from the above?
Rgds,
MkyCheck pkginfo -l for each package.
export the PATH variable where the packages are installed, like /usr/local/bin and etc. -
LDAP Client Configuration in Non Global Zone
I have configured 3 non global zones (different ip addresses and different names from global zone), installed LDAP client 2 on each, which worked fine, until the zones were rebooted. The ldapcachemgr was running, but authentication does not work--have to reinstall ldapclient each time.
Does anyone have any suggestions?Here are a few things to check:
1. /var/ldap/ldap_client_file - Does it have the info you're expecting? If not, it could be the config profile in the Direcotry Server is incorrect.
2. /etc/nsswitch.conf - Is it configured correctly?
3. /etc/pam.conf - Is that configured correctly?
4. If the above files appear OK, check the access logs on the Directory Server.
HTH,
Roger S. -
Oracle licensing in Solaris zones
Hi all,
I've read a few documents about Oracle licensing :
http://www.sun.com/third-party/global/oracle/consolidation/Containers_Oracle_041305.pdf
http://www.oracle.com/corporate/pricing/partitioning.pdf
However, there's one thing not clear to me. In Solaris zones, you dedicate threads (usually referred to as 'CPU' on Solaris) to zones. Oracle licensing is always about the number of cores used by the partition, not the number of threads. How do you convert from threads to cores?
I'll give an example:
A T2 system with 2 processors, 8 cores each, 8 threads each (128 threads in total). You create a resource pool with 2 CPUs (threads): 1 thread from one core, and 1 thread from another one (or they are assigned like that for you) and associate a zone that runs Oracle.
I can think of two ways of calculating the number of cores used:
1) divide the number of dedicated threads by the number of threads per core: 2 / 8 = 0.25 (optionally round it up to 1) -- This is how IBM does its licensing.
2) count the number of physical cores that are being used by the zone. In this case this is 2, as the threads are not running on the same core.
Can anyone help me figuring this out?
Thanks!
Regards,
MathieuHi Dezutterm,
I'm not a sales guy, but from how I understand things... you've already figured it out yourself:
dezutterm wrote:
I'll give an example:
A T2 system with 2 processors, 8 cores each, 8 threads each (128 threads in total). You create a resource pool with 2 CPUs (threads): 1 thread from one core, and 1 thread from another one (or they are assigned like that for you) and associate a zone that runs Oracle.
I can think of two ways of calculating the number of cores used:
1) divide the number of dedicated threads by the number of threads per core: 2 / 8 = 0.25 (optionally round it up to 1) -- This is how IBM does its licensing.
2) count the number of physical cores that are being used by the zone. In this case this is 2, as the threads are not running on the same core.
Can anyone help me figuring this out?Like you've seen, Oracle cares about how many cores are running Oracle software, not threads (from "Processor" definition here: http://www.oracle.com/corporate/pricing/technology-price-list.pdf). If you have 2 cores running Oracle software, you take "2" and multiple by the Core Processor Licensing Factor for that model of CPU (http://www.oracle.com/corporate/contracts/library/processor-core-factor-table.pdf) which for a T2 is 0.25... meaning you need 2 x 0.25 = 0.5 processor licenses. If you would have used both threads from the same core, you would need 0.25.
If this isn't correct, somebody please let us know, thanks!
[email protected] -
Can EM12c Cloud Control agent be installed in a solaris zone?
Can EM12c Cloud Control agent be installed in a solaris zone?
If so, are Solaris 8 and Solaris 9 zones supported?
thanksYes we can...
Solaris 9 is supported...I have installed agents on solaris 9 and 10
Maybe you are looking for
-
Lsmw Error during the specify files
While doing Material master upload thru lsmw...using Batch input method During the specify files step i am getting this error File Name 'Converted Data': Max. 45 Characters. Remaining data saved. Message no. /SAPDMC/LSMW_OBJ_060028 Pls Guide me......
-
Acrobat 8: JobOptionsFolder / PDF Admin Settings in Windows registry
Hello, Systems are Windows XPSP2, Acrobat Professional 8.1.2 We would like to share *.joboption files via a readonly server share (W2K3 Server). In the windows registry we find two values with the default path to the *.joboptions files: 1. HKLM\Softw
-
Hi I'm having an issue with the shadow effect that must be so simple to resolve because if its not I don't understand why this tool is available. I have created a text box which is placed over another colour area, typed my text, clicked on the shadow
-
Installing Oracle 8i client tools on Windows 2K Advanced Server SP2
I am having issues with installing Oracle 8i client tools on W2K Advanced Server SP2. The CD I have is labeled Oracle 8i Enterprise Edition, Release 3 (8.1.7) Win NT/2000 CSI# 2224188. The error message I get is that a dependency exist on having ORAC
-
I'm unable to update my mac mini. When I try it shows a message "software quit unexpectedly". I try and reopen but message returns.