Configure NWBC for the first time
Hi,
I tried to configure NWBC for the first time and i am having problem at the login configuration on the URL. I am not sure what is the correct URL i should put here. I followed the guide on http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/31/8dd113b8ba4832aeaafb4b756e1eed/frameset.htm and read through sap note 900000 but still cannot get this URL resolve.
If can, please provide me step by step on how to obtain the information on the URL syntax as provided the in the configuration guide
http(s)://<server>.<domain>.<ext>:<port>/<path>
Thank you
Hi,
The URL should ideally be:
http://<fully qualified host name>:<http port>/sap/bc/nwbc/nwbc_launch.
But if you run the transaction 'nwbc' from the SAPGui, that should automatically open up this link. What is the error you get while opening this link?
To find the fully qualified domain name and http port details:
- goto tcode smicm
- click services icon or shift+f1, here http port number is shown
- goto -> parameters -> display -> check icm/host_name_full, here the fqdn is shown
Regards,
Srikishan
Similar Messages
-
after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.
My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...
-
Music Centre encountered a problem whilst configuring for the first time ref x912
Music Station, pre loaded on my HP pavillion g6, encountered a problem when trying to register my account/configuring for the first time and gave a referemce as X912 recommending I contact customer support. Please direct me to the site where I may remedy this
Do the following articles help at all?
Trouble installing iTunes or QuickTime for Windows
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues -
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO. -
Setting up a cluster for the first time: newbie questions
Any help appreciated with this situation:
I'm trying to set up a cluster for the first time and running into
issues (no big surprise). I'll outline my situation and pose questions
as they arise. If/when I get things to work I'll post a step-by-step
summary of what it took to get a simple cluster going.
Here's what I have:
machines:
1 Windows 2000 machines with WL 6.1
2 RedHat Linux machines with WL 6.1
All machines are on the same Home LAN, can see each other, etc.
IP addresses are:
Windows box: 192.168.1.100
Linux box 1: 192.168.1.102
Linux box 2: 192.168.1.103
servers:
I've set up the Windows machine as my admin server, and set up
a managed server on each Linux machine. I created a cluster that consists
of the 2 Linux machines and deployed the web app and EJB to the cluster.
The Windows machine is acting as a Proxy using ClusterServlet.
The web application has been set as the Default Web Application on the
two Linux machines. All 3 machines are listening on ports 80/443. I also
set up session memory replication through the console.
Application:
I have an application that I package as an EAR file. I'm using it as a
"reference" application designed to mimic a real world app as much as possible.
The EAR file contains a web application that uses Struts. It also consists
of a single Stateless Session Bean. The WAR file and EJB Jar are all
packaged up into the EAR file. I've been able to run this application just
fine on a single managed server on all 3 machines.
The web application works fine, and it can invoke the EJB. I can also
invoke the EJB from Java stand-alone clients. Struts works great. All is
well with the world. Now I'm trying to "cluster-ize" this app using
the environment described above and encountering issues.
I've read the docs and followed the instructions according to the
"Weblogic Bible" book. I can bring up all 3 servers and the Linux
managed servers connect to the cluster just fine. I can also
see the Struts messages in their logs which normally happens and tells me
the webapp is initialized properly. The console tells me that the managed
servers are running. I get no error messages starting up any of the serves.
Here are the problems I am encountering.
When I try to access the Web Application (through a browser on the
Windows machine using http://localhost) I get the following error message:
<Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
x,admin) found no context for "/". This request does not match the context path
for any installed web applications and there is no default web application confi
gured.>
Also, when I try to invoke the EJB through a stand-alone Java client,
I get a JNDI lookup error on the EJB's home interface.
Questions:
Question1: I noticed when setting up the machines that console lets you
define a "Machine" or a "Unix Machine". What's the difference? Should I
define the Linux machines as Unix machines or machines, and what are the
consequences of either choice?
Question2:
I'm not totally clear on how my web.xml should look to set up Struts,
the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
Here is what I had before I tried to cluster and which works fine:
<filter>
<filter-name>MainFilter</filter-name>
<filter-class>com.refapp.servlets.MainFilter</filter-class>
<init-param>
<param-name>myAttribute</param-name>
<param-value>Foo</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>MainFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping
<!-- Struts ActionServlet Configuration -->
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>application</param-name>
<param-value>refappstruts</param-value>
</init-param>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>mapping</param-name>
<param-value>org.apache.struts.action.RequestActionMapping</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.do</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
(I have set up a "dummy" 0-length file called index.do that triggers
Struts to go into its ActionServlet when first accessing the web site).
Here is how I added ClusterServlet to web.xml:
servlet>
<servlet-name>ClusterServlet</servlet-name>
<servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
<load-on-startup>0</load-on-startup>
<init-param>
<param-name>defaultServers</param-name>
<param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
</init-param>
<init-param>
<param-name>DebugConfigInfo</param-name>
<param-value>ON</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>InitServlet</servlet-name>
<url-pattern>/servlet/InitServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.html</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
Clearly there is a problem with the Default Web application not being
seen/mapped properly. Any chances my URL mappings for the filter servlet,
Struts, and ClusterServlet are stepping on each other?
With respect to the EJB, here is what my weblogic-ejb-jar looks like:
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>Hello</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>100</max-beans-in-free-pool>
</pool>
<stateless-clustering>
<stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
<stateless-bean-load-algorithm>
round-robin
</stateless-bean-load-algorithm>
<stateless-bean-methods-are-idempotent>
true
</stateless-bean-methods-are-idempotent>
</stateless-clustering>
</stateless-session-descriptor>
<jndi-name>Hello.Home</jndi-name>
</weblogic-enterprise-bean>
I run this through ejbc and package everything up into the EAR file.
However, I get a JNDI lookup failure when I try to access the Bean from
a standalone Java client running on the Windows machine.
Here is the jndi.properties file that I am using:
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://localhost:80
Any ideas what I'm doing wrong here? I can post config.xml also if needed.
Thanks in advance!
Let me try to answer :)....
A1> No need to name diff machines by default weblogic
considers the servers are physically located in diff boxes.
The names are used to differtiate the mang servers which are in
multihomed
Some things to chk
1> Did u targeted the ear file Target as cluster.
2> Can u see on the Admin console that both the man servers
are participated in the cluster( u can see by clicking the monitoring
tab on the Cluster node).
3>Is the URL:PORT for the default web app correct?
the reason: is I dont see the port# on the link u mentioned
4> probably ur ejb might not been deployed on the target thats the
reason u cant access thru java client. If u correct the targets that
will probably fix it.
Hope this helps
Please post the result
Thanks
Sudhir
[email protected] (Chris) wrote in message news:<[email protected]>...
> Any help appreciated with this situation:
> I'm trying to set up a cluster for the first time and running into
> issues (no big surprise). I'll outline my situation and pose questions
> as they arise. If/when I get things to work I'll post a step-by-step
> summary of what it took to get a simple cluster going.
> Here's what I have:
>
> machines:
> 1 Windows 2000 machines with WL 6.1
> 2 RedHat Linux machines with WL 6.1
> All machines are on the same Home LAN, can see each other, etc.
> IP addresses are:
> Windows box: 192.168.1.100
> Linux box 1: 192.168.1.102
> Linux box 2: 192.168.1.103
>
> servers:
> I've set up the Windows machine as my admin server, and set up
> a managed server on each Linux machine. I created a cluster that consists
> of the 2 Linux machines and deployed the web app and EJB to the cluster.
> The Windows machine is acting as a Proxy using ClusterServlet.
> The web application has been set as the Default Web Application on the
> two Linux machines. All 3 machines are listening on ports 80/443. I also
> set up session memory replication through the console.
>
> Application:
> I have an application that I package as an EAR file. I'm using it as a
> "reference" application designed to mimic a real world app as much as possible.
> The EAR file contains a web application that uses Struts. It also consists
> of a single Stateless Session Bean. The WAR file and EJB Jar are all
> packaged up into the EAR file. I've been able to run this application just
> fine on a single managed server on all 3 machines.
> The web application works fine, and it can invoke the EJB. I can also
> invoke the EJB from Java stand-alone clients. Struts works great. All is
> well with the world. Now I'm trying to "cluster-ize" this app using
> the environment described above and encountering issues.
>
> I've read the docs and followed the instructions according to the
> "Weblogic Bible" book. I can bring up all 3 servers and the Linux
> managed servers connect to the cluster just fine. I can also
> see the Struts messages in their logs which normally happens and tells me
> the webapp is initialized properly. The console tells me that the managed
> servers are running. I get no error messages starting up any of the serves.
>
> Here are the problems I am encountering.
>
> When I try to access the Web Application (through a browser on the
> Windows machine using http://localhost) I get the following error message:
>
> <Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
> x,admin) found no context for "/". This request does not match the context path
> for any installed web applications and there is no default web application confi
> gured.>
>
> Also, when I try to invoke the EJB through a stand-alone Java client,
> I get a JNDI lookup error on the EJB's home interface.
>
> Questions:
> Question1: I noticed when setting up the machines that console lets you
> define a "Machine" or a "Unix Machine". What's the difference? Should I
> define the Linux machines as Unix machines or machines, and what are the
> consequences of either choice?
>
> Question2:
> I'm not totally clear on how my web.xml should look to set up Struts,
> the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
> Here is what I had before I tried to cluster and which works fine:
>
> <filter>
> <filter-name>MainFilter</filter-name>
> <filter-class>com.refapp.servlets.MainFilter</filter-class>
> <init-param>
> <param-name>myAttribute</param-name>
> <param-value>Foo</param-value>
> </init-param>
> </filter>
>
> <filter-mapping>
> <filter-name>MainFilter</filter-name>
> <url-pattern>/*</url-pattern>
> </filter-mapping
>
>
> <!-- Struts ActionServlet Configuration -->
> <servlet>
> <servlet-name>action</servlet-name>
> <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
>
> <init-param>
> <param-name>application</param-name>
> <param-value>refappstruts</param-value>
> </init-param>
>
> <init-param>
> <param-name>config</param-name>
> <param-value>/WEB-INF/struts-config.xml</param-value>
> </init-param>
>
> <init-param>
> <param-name>debug</param-name>
> <param-value>2</param-value>
> </init-param>
>
> <init-param>
> <param-name>mapping</param-name>
> <param-value>org.apache.struts.action.RequestActionMapping</param-value>
> </init-param>
> <load-on-startup>2</load-on-startup>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <welcome-file-list>
> <welcome-file>index.do</welcome-file>
> <welcome-file>index.jsp</welcome-file>
> <welcome-file>index.html</welcome-file>
> </welcome-file-list>
>
> (I have set up a "dummy" 0-length file called index.do that triggers
> Struts to go into its ActionServlet when first accessing the web site).
>
> Here is how I added ClusterServlet to web.xml:
>
> servlet>
> <servlet-name>ClusterServlet</servlet-name>
> <servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
> <load-on-startup>0</load-on-startup>
> <init-param>
> <param-name>defaultServers</param-name>
> <param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
> </init-param>
> <init-param>
> <param-name>DebugConfigInfo</param-name>
> <param-value>ON</param-value>
> </init-param>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>InitServlet</servlet-name>
> <url-pattern>/servlet/InitServlet</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>/</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.html</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.jsp</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
>
> Clearly there is a problem with the Default Web application not being
> seen/mapped properly. Any chances my URL mappings for the filter servlet,
> Struts, and ClusterServlet are stepping on each other?
>
> With respect to the EJB, here is what my weblogic-ejb-jar looks like:
>
> <weblogic-ejb-jar>
> <weblogic-enterprise-bean>
> <ejb-name>Hello</ejb-name>
> <stateless-session-descriptor>
> <pool>
> <max-beans-in-free-pool>100</max-beans-in-free-pool>
> </pool>
> <stateless-clustering>
> <stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
> <stateless-bean-load-algorithm>
> round-robin
> </stateless-bean-load-algorithm>
> <stateless-bean-methods-are-idempotent>
> true
> </stateless-bean-methods-are-idempotent>
> </stateless-clustering>
> </stateless-session-descriptor>
> <jndi-name>Hello.Home</jndi-name>
> </weblogic-enterprise-bean>
>
> I run this through ejbc and package everything up into the EAR file.
> However, I get a JNDI lookup failure when I try to access the Bean from
> a standalone Java client running on the Windows machine.
> Here is the jndi.properties file that I am using:
>
> java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
> java.naming.provider.url=t3://localhost:80
>
> Any ideas what I'm doing wrong here? I can post config.xml also if needed.
>
> Thanks in advance!
-
Getting the below error when running the Baseline.grf for the first time
I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
at org.jetel.graph.Phase.free(Phase.java:487)
at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
at org.jetel.component.RunGraph.execute(RunGraph.java:302)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
at org.jetel.component.RunGraph.execute(RunGraph.java:324)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com -
How does a BlackBerry handheld connect to BES for the first time?
How does a Blackberry device connect to BlackBerry Enterprise Server (BES) for the first time? Is there a risk that a rogue BlackBerry handheld connects to BES?
Thank you in advance!Hi and Welcome to the Forums!
When a BES admin sets up a BB on BES, they configure the unique BB PIN into their BES and also create credentials that are required to actually complete the registration process on the BB. So, while there is no perfect security anywhere, I don't think the risk you are concerned about is high enough to warrant any attention.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi,
We have two GPO's with IE maintenance (Preference Mode Configured)
The settings it has are
1. Automatically detect configuration settings - Set to Enabled.
2. Automatic Browser configuration - Not configured.
We do not have proxy value set in IE through this GPO.
We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh.
I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
Thanks
Ryan -
Setting up a Time Capsule for the first time and replacing it with an existing Router
Hey there,
I have got a new TC which I will be setting it up for the first time. I have a very old beetle router. I would be using the TC as a wireless hard drive and also as my WiFi Router. After reading the setup guide, I am confused about which option to choose. Moreover, available references on the internet do not provide any clear-cut solution.
My basic aim is to replace my router with the TC and use its in-built WiFi hardware. Since I have an EPSON printer which is connected to my router wirelessly, I am not willing to change its settings. Please guide me which option to choose regarding the same.
Thanks in advanceSince you have a modem/router, you must continue to use the Beetel modem/router on your network.
The Time Capsule can connect to the Beetel modem/router using a wired Ethernet cable connection and produce a separate wireless network. You would NOT want the Beetel router and Time Capsule to both try to produce the same wireless network if they are located close together, since this will likely create interference problems that may prevent devices from connecting to either the Beetel orTime Capsule wireless network.
The exception to having the Beetel modem/router and Time Capsule produce the same wireless network would be if you can locate the Time Capsule at least a room or two away from the Beetel modem/router. An Ethernet cable can be run up to 300+ feet or about 100 meters with no signal loss, so you should be able to locate the Time Capsule anywhere you want.
Are you able to consider this option?
Another option.....if you cannot locate the Time Capsule in another room......would be to configure the Time Capsule to use the same wireless network name and password as the Beetel network and turn off the wireless on Bettel modem/router.
Important.....there is no guarantee that the printer will be able to connect to the Time Capsule wireless network, so you should expect to start over and set up the printer again.
Yet another option would be to turn off the wireless service on the Time Capsule and use the Beetel wireless to back up your computers to the Time Capsule, which will act as a wired hard drive for the network. If you select this option, the Time Capsule can be located close to the Beetel modem/router. -
When tried to login WebConsole for the first time 404 not found error got
Hi All,
We have recently installed MI 7.0(NW2004s) and configured also as per the configuration document. But when we tried to login WebConsole we are getting the error of 404 not found. I donot know what and where I have test to login to WebConsole.
Is there any way how to test to login to WebConsole for the first time.
Appreciate your help.
Regards,
Ameer Baba.Hi Ameer,
Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
Regards,
Satyendra -
I am going to back up to Time Machine for the first time
which I know sounds nuts. I was manually doing it for the past 6 months- don't ask why.
Do I have to completely wipe out my Lacie and do any formatting to it? Or do I just delete everything from it and set my Time Machine to default backup to that drive and go from there as if I'm doing it for the first time?
Also, I don't keep my EHD attached constantly to my laptop- I assume that is not a problem and whenever I hook it up, I can then ask TM to go to work?
Sorry for the basic questions- appreciate the help!
Thanks,
BerniceI haven't burned a CD in years. My old MacBook doesn't have a DVD burner.
The biggest issue is the size of your various drives. For Time Machine, your Time Machine drive should be three times the size of the drive you are backing up. If you don't quite have that (and I don't), you can get away with three times the amount of data you are backing up. Whichever configuration gives you that equation should be the one you use for Time Machine. You can partition one of the external drives so that one partition is big enough for Time Machine and the other is used for other purposes, such as archives. I have one external drive configured like that. If you don't have enough room to partition, then dedicate one drive to Time Machine and the other to archives and/or clones.
Some people feel it is very important to maintain a long Time Machine history and migrate that to new drives. I don't quite understant that. I use Time Machine for backups, nothing more. I blow away all my backups on a fairly regular basis and start a fresh one. I don't need six month old versions of files. If I accidentally delete a file, I will notice sooner than that. If I have a hardware failure, I only need the last backup.
I currently have those bootable clones only because my MacBook is in a funky state right now (long story) and my MacBook Pro is a work machine bound to an Active Directory domain. I can't rebuild that system by myself without IT from work and that would be difficult for me (longer story). I don't consider bootable clones to be a regular part of my backup strategy. They are useful snapshots and archives for specific times when I feel I need them. -
Trying to open Premiere elements 12 for the first time even though I had it loaded for a while. It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct). Any suggestions?
First we need to check , whether the LAN settings is set to detect settings Automatically or not.
Follow below steps .
1)Open Control Panel and then click on the option "Network and Internet" .
2)Click on Internet options, click on 'Connections' tab.
3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
Then launch Premiere Elements 12 and try to sign in.
If the settings were already set like that or you face same issue after signing in , let me know -
Installing SAP B1 for the first time
Hi all i`m trying to install SAP B1 client side for the first time in my computer
i get the Install Shield status bar that preparing for installation but afterwards nothing is happening. after i`m closing the program with "Task Manager" (of windows XP) i`m getting an error msg "1628: Failed to complete installation".
I dont know what is the problem
i`ve on my computer several of DB`s such as DB2, DB2/400, MS-SQL, MySQL, Oracle and btrieve.
I hope someone can help me...Hi Mark,
Yes, I did visit you guys in Israel a couple of months ago. I hope all of you are doing well.
Is there another computer on your network that has more or less the same configuration as yours? Same databases, etc. Does your computer have the same network settings as the others where it is working?
Adele -
Create Planning Application for the first time without using workspace
hi,all:
I come across a problem:The Hyperion Planning Application isn't configured into the workspace,but i have to create a Hyperion Planning Application for the first time.So, have any other methods to solve this problem? Can I use other tools or something to create it?
thanks very muchyellow wrote:
Hi,John,Thanks for your quick reply.
I think after install Hyperion Planning,at first time can't create application in this address:http://localhost:8300/HyperionPlanning/ ,usually create it in workspace.
Is the address you said different from http://localhost:8300/HyperionPlanning/?
thanksI gave you the address to create a planning application directly - http://localhost:8300/HyperionPlanning/AppWizard.jsp
Notice the AppWizard.jsp on the end.
If it version 11 you will be able to create your datasource from that location, if it is version 9 then you will have to create a datasource first from the configuration utility.
Cheers
John
http://john-goodwin.blogspot.com/ -
JSF: Accessing Page for the first time
Hi,
I found out that accessing a JSP page(developed with JSF tags ) for the first time does not display any output. Either the page has to be refreshed or re-submitted. Am I missing something here or is it a known functionality ?
Configuration
Web-Container: Tomcat 4.1
IDE: Jbuilder 9.0
Regards,
PriyeshHi,
I found out that accessing a JSP page(developed with
JSF tags ) for the first time does not display any
output. Either the page has to be refreshed or
re-submitted. Am I missing something here or is it a
known functionality ?You need to access the page behind a "/faces" prefix. For example, if you've got JavaServer Faces component tags on a page named "/foo.jsp", your URL should be something like:
http://localhost:8080/myapp/faces/foo.jsp
Craig
Maybe you are looking for
-
My iPhone 5 randomly shutdown and rebooting doesn't seem to work for me, what should I do?
It also happens when I'm charging my phone, and also the battery percentage doesn't show that correct battery level not unless I turn off and on.. I tried rebooting the phone but it doesn't seem to work for me, random shutdown still happens..
-
I can get my first set of JScrollPane and JTextArea to appear, but the second just will not. Here is all my code refering to the frame. I hope you can find what I cannot. public Frame(){ Object[] items={"Choose One","1","2","3","4
-
Dears, The Foreach operator and where statement has an issue with measure for instance =Count([Annual Salary] ForEach ([L01 Employee Basic Data Key]) Where ([Annual Salary]>0)) returns 1 in BO4 SP2 wheras works fine in BO3 SP2 the value is around 5
-
Bold 8900 Desktop software 5.00 error 1316
Vodafone have replaced 2 defective 8900s and have now sent me a Bold 8900. This doesn't work with the desktop software I had installed for the 8900 (4.7) I've tried installing ver. 5.0 but get error message 1316. Some one suggested I remove the 4.7
-
Hi, We are new (actually, still evaluating) LabView customers. I know nothing about Labview, and less about the technical intracacies of the project that I have to complete. Basically, what I need to do is acquire and capture up to three streams of