Configure NWDI 7.0

Hi Gurus,
   I have installed NW 7.01 and didn't configure the NWDI Lanscape. Please guide me how to do it now.
I am unable to find the Change Management Service - Landscape configurator link so that I can configure further.
I have followed the below link to configure.
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/c0b1f2c8-54e0-2910-9ab3-b85f15093655&overridelayout=true
Biswajit

Hi,
Kindly go through the below link,Hope this will help you out.
[http://help.sap.com/nw701/]
Thanks & Regards
Ajitabh

Similar Messages

  • Configure NWDI in ce

    HI guys, is there NWDI in ce? If there is not,should i user NW7.0? Are there any document about configuring NWDI IN CE7.1?thanks

    Hi,
    For Composition Environment 7.1 , you can reuse
    the existing NWDI server running on NW 7.0. If you need to setup a new NWDI server in your system landscape, please install the latest release (currently NW 7.0) and update
    the installation to the latest support pack level.
    [This doc |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f]is helpful for you.

  • SP Version in Configuring NWDI

    Hello Experts,
          I am in the process of configuring NWDI, my doubt is i have deployed NWDI SP14 files but my JAVA   WAS is of SP15? Will both be compatible?
    I looked at this forum How to Install NWDI on SAP NW 2004s SP7 but those are for earlier version... Still that is applicable for all the SP's?
    Thanks
    Gopal

    ... and as addition, mostly it would work, but as pascal said, try to have your J2EE engine components on the same level. And there shouldn't be any problems to apply the new stack (depends on your hardware), but for the three NWDI packages this shouldn't take more then 15 mins.
    Regards,
    Daniel

  • Configuring NWDI

    Hello All,
           What is the Step by step procedure to configure NWDI in the Netweaver 7.0, SP15, Java WAS 7.0. and  Step by step Procedure for creating Products, Tracks, SC etc.
    Thanks.
    Gopal

    Thanks a lot for the valuable help your providing till now....
    I havent done anything with SLD till now... Once i installed and upgraded my server i started to work with "Initial setup of functional unit Development Infrastructure (DI all-in-one)" ...
    yeah...   http://<host>:<port>/devinf, is working fine and i was able to log in to CMS and i was able to find a track SANDBOX created and in the Transport Studio 's Development tap i was able to find sap.com_SAP-JEE (waiting for Import), sap.com_SAP_BUILDT(waiting for Import), sap.com_SAP_JTECHS(import failed) components.
    By Skiping that error process i was able to successfully able to create a track called SANDBOX and in http://<...>:<...>/devinf under show track list iwas able to view
    SANDBOX ( ID: SANDBOX | Desc: Sandbox for Learning, Demo and Prototyping )
    Development
              CMS: Change Management Service
              CBS: Component Build Service ( http://<...>:<...>)
              DTR: Design Time Repository ( http://<....>:<...>/dtr )
    Consolidation
             CMS: Change Management Service
             CBS: Component Build Service ( http://<...>:50000 )
             DTR: Design Time Repository ( http://<...>:<...>/dtr )
    And in my NWDS i tried to import the development configurations but am getting this following error
    com.sap.tc.devconf.SyncException: Could not create mountpoint for SC in compartment example.org_MYCOMPONENTS_1: Checking existence failed for /dtr/ws/SANDBOX/example.org_MYCOMPONENTS/dev/inactive(Forbidden [(pre||post)-condition failed: DAV:access-denied])
         at com.sap.tc.devconf.impl.DTRClientErrorMapper.toSyncException(DTRClientErrorMapper.java:65)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2759)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.createMountPointsForSCs(DevelopmentConfiguration.java:3047)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.goOnline(DevelopmentConfiguration.java:5216)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:773)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:698)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:669)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard.addDevConf(DevConfWizard.java:505)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard.access$100(DevConfWizard.java:67)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard$1.run(DevConfWizard.java:348)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard.performFinish(DevConfWizard.java:346)
         at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
         at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
         at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
         at org.eclipse.jface.window.Window.open(Window.java:563)
         at com.sap.ide.eclipse.component.provider.actions.DevConfNewMenuAction.openWizard(DevConfNewMenuAction.java:39)
         at com.sap.ide.eclipse.component.provider.actions.DevConfNewMenuAction.run(DevConfNewMenuAction.java:33)
         at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
         at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:207)
         at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
         at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
         at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
         at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: com.tssap.dtr.client.lib.vfs.config.ConfigurationException: Checking existence failed for /dtr/ws/SANDBOX/example.org_MYCOMPONENTS/dev/inactive(Forbidden [(pre||post)-condition failed: DAV:access-denied])
         at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.getRemoteCollection(RepositoryServer.java:432)
         at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.getLowestExistingCollection(RepositoryServer.java:418)
         at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.assureRemotePathExists(RepositoryServer.java:197)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2749)
         ... 44 more
    Caused by: com.tssap.dtr.client.lib.deltavlib.DeltavException: Forbidden [(pre||post)-condition failed: DAV:access-denied]
         at com.tssap.dtr.client.lib.deltavlib.impl.DeltavCommand.checkResponseStatus(DeltavCommand.java:107)
         at com.tssap.dtr.client.lib.deltavlib.impl.DeltavCommand.execute(DeltavCommand.java:68)
         at com.tssap.dtr.client.lib.deltavlib.impl.AbstractResource$PropFinder.load(AbstractResource.java:1085)
         at com.tssap.dtr.client.lib.deltavlib.impl.cache.HashmapPropCache.refresh(HashmapPropCache.java:244)
         at com.tssap.dtr.client.lib.deltavlib.impl.AbstractResource.refresh(AbstractResource.java:657)
         at com.tssap.dtr.client.lib.deltavlib.impl.ResourceLocatorFactoryImpl.createCollection(ResourceLocatorFactoryImpl.java:414)
         at com.tssap.dtr.client.lib.deltavlib.impl.ResourceLocatorFactoryImpl.createCollection(ResourceLocatorFactoryImpl.java:183)
         at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.getRemoteCollection(RepositoryServer.java:429)
         ... 47 more
    Caused by:
    [VFS version: 7.00 645_VAL_REL 0010 (2007-04-07 16:45:07 CEST)] com.tssap.dtr.client.lib.vfs.config.ConfigurationException: Checking existence failed for /dtr/ws/SANDBOX/example.org_MYCOMPONENTS/dev/inactive(Forbidden [(pre||post)-condition failed: DAV:access-denied])
        at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.getRemoteCollection(RepositoryServer.java:432)
        at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.getLowestExistingCollection(RepositoryServer.java:418)
        at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.assureRemotePathExists(RepositoryServer.java:197)
        at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2749)
        at com.sap.tc.devconf.impl.DevelopmentConfiguration.createMountPointsForSCs(DevelopmentConfiguration.java:3047)
        at com.sap.tc.devconf.impl.DevelopmentConfiguration.goOnline(DevelopmentConfiguration.java:5216)
        at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:773)
        at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:698)
        at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:669)
        at com.sap.ide.eclipse.component.wizard.DevConfWizard.addDevConf(DevConfWizard.java:505)
        at com.sap.ide.eclipse.component.wizard.DevConfWizard.access$100(DevConfWizard.java:67)
        at com.sap.ide.eclipse.component.wizard.DevConfWizard$1.run(DevConfWizard.java:348)
        at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
        at com.sap.ide.eclipse.component.wizard.DevConfWizard.performFinish(DevConfWizard.java:346)
        at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
        at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
        at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
        at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
        at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
        at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
        at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
        at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
        at org.eclipse.jface.window.Window.open(Window.java:563)
        at com.sap.ide.eclipse.component.provider.actions.DevConfNewMenuAction.openWizard(DevConfNewMenuAction.java:39)
        at com.sap.ide.eclipse.component.provider.actions.DevConfNewMenuAction.run(DevConfNewMenuAction.java:33)
        at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
        at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:207)
        at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
        at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
        at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
        at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
        at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
        at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
        at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
        at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
        at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
        at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
        at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
        at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
        at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
        at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
        +++ Nested exception part 1/1
        com.tssap.dtr.client.lib.deltavlib.DeltavException: Forbidden [(pre||post)-condition failed: DAV:access-denied]
            at com.tssap.dtr.client.lib.deltavlib.impl.DeltavCommand.checkResponseStatus(DeltavCommand.java:107)
            at com.tssap.dtr.client.lib.deltavlib.impl.DeltavCommand.execute(DeltavCommand.java:68)
            at com.tssap.dtr.client.lib.deltavlib.impl.AbstractResource$PropFinder.load(AbstractResource.java:1085)
            at com.tssap.dtr.client.lib.deltavlib.impl.cache.HashmapPropCache.refresh(HashmapPropCache.java:244)
            at com.tssap.dtr.client.lib.deltavlib.impl.AbstractResource.refresh(AbstractResource.java:657)
            at com.tssap.dtr.client.lib.deltavlib.impl.ResourceLocatorFactoryImpl.createCollection(ResourceLocatorFactoryImpl.java:414)
            at com.tssap.dtr.client.lib.deltavlib.impl.ResourceLocatorFactoryImpl.createCollection(ResourceLocatorFactoryImpl.java:183)
            at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.getRemoteCollection(RepositoryServer.java:429)
            at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.getLowestExistingCollection(RepositoryServer.java:418)
            ... 46 more
    Is this error due to that import failure of sap.com_SAP-JEE, sap.com_SAP_BUILDT, sap.com_SAP_JTECHS. ?   If so, what has to be done
    May i know what are the things has been finished as of now...
    Is the complete NWDI configuration is completed?
    what should be done next i.e the things releated to development configurations (Track / Layered) .......
    without doing any development configuration i was able to log in to development configuration prespective of NWDS and am getting the above error...
    Thanks
    Gopal
    Edited by: Gopal Krishnasamy on Aug 29, 2008 11:18 AM

  • Error in configuring NWDI - by using configuration wizard

    Hello,
    I have installed CE 7.1 and like to install NWDI. It requires me to execute some configuration wizards from administratio tool of the NW CE server. I am following the configuration guide for NWDI and initiated a "Change Management Service (CMS): Create an Application Skeleton". It asks me to provide a CMS URL when I give it http://localhost:50000 or http://cmsmain.localhost:50000 it give me an error that CMS is not running or the URL is not correct like this.
    I got to know that CMS is builtin in NWDI and NWDI is builtin in NW CE 7.1. How to check whether CMS is installed. Or any idea to configure the NWDI.
    Regards,
    Naeem Khan

    Hi Alexander,
    You may be right. I am installed trial version for the moment. But I have installed ESR as additional comoponent which I have downloaded from Service Market Place. Let's try!!!!!
    But the problem is that I have seen there are several components If I go Support Packages and Patches" -->SAP NetWeaver" -->SAP NETWEAVER" SAP EHP1 FOR SAP NW CE 7.1" -->Entry by Component" NW Development Infrastructure
    what for components should I require from this site??? and how to deploy them on my server??? Unlike ESR there are SCA files which I am not sure how to deploy them on my server!!! If you know please let me know.
    Regards,
    Naeem

  • Configuring nwdi in my landscap .............. urgent friends

    hi friends                           urgent ......................
    advance thank for your valuable time
    i our organation we are planning to install nwdi for ep 7.0. i am very new to nwdi.
    i would like to know how to configur the nwdi in my land scape step-by-step with post-intallation ativies
    end - to - end
    1. i would like to know what are the pre-requisties i have to follow
    2. what are the postinstallation i have to do .
    3. how can i give access to my develper user
    4. how to configure the entire nwdi in my landscap
    plz help me (thank in advance )
    thank for spending time reading my issue.
    raja

    Hi there,
    NWDI Installation and configuration is bit complex and there are lot of steps involved in it.
    Follow this [link|http://help.sap.com/saphelp_nw70/helpdata/en/63/7a4d40eae76f13e10000000a1550b0/frameset.htm] and you will get all required info. Let me know if you don't get something from this.
    Thanks
    Shobhan

  • Configure NWDI \ Connect systems to NWDI

    Hello!
    I'm absolutelly new in tis so i need professional's support.
    I've installed system with DI component. Used Wizard to deploy NWDI with CMS (as i can see SLD now started, some configuration in DRT and CMS apears also).
    Now i have 3 BPM systems (Dev, Q and Prod).
    What should i do next?
    How to connct this 3 system to use NWDI?
    I reading sap help but its not clear for me.
    May be sombody have good manuals for starters (idiots)?
    Any help would be nice!
    Thank you in advance!

    Hi,
    what you found is an old description for 640/700. I am not sure BPM existed that time.
    What you need to do on the other hand is the same with slight differences.
    First you need to find out what is the release you intend to develop for. Assuming you use 7.3 you can see in the corresponding note (1457908 - Required SCs for Specific Type of Development in 7.3 Track) which SC dependencies to use from BPM when you build you product (creating your custom SC in SLD and specifying build time dependencies).
    Once you finished in SLD, you need to trigger "Update CMS" in CMS webui (Landscape Conf --> Domain Data) and create the track where you add you custom SCs (with the SC dependencies configured previously in SLD). After that you need to make sure the SCs are physically available in your <transpor folder>/CMS/inbox  (find your transport folder by checking it on the Domain Data).
    Once the files downloaded from Service Marketplace and put to the transport folder, you need to Check-In (CMS webui --> Transport Studio - select your track -- you find check-in on the first tab).
    If it is checked in you need to import to Development and Consolidation. If it is done then you can start your NWDS and import the corresponding development configuration.
    I hope this helps.
    Regards,
    Ervin

  • Configure NWDI for local development Server only.

    Hello Gurus,
    I have a Netweaver 7.0 AS JAVA + ABAP installed in my local machine.
    I wanted to create a Development Track for NWDI based development, but when i go to Change Management Service for to create a track I see that CMS domain is not setup!
    Can anyone help me in configuring my AS JAVA's NWDI to use only one DEV server(for practice purposes)
    regards,
    Ganesh

    Hi,
    you have 2 options.
    Either you run the DI-All-in one configuration wizard from the NWA which helps you amongs others to configure the NWDI domain,
    http://help.sap.com/saphelp_nw73/helpdata/en/49/11f10fcf292810e10000000a42189c/frameset.htm
    Or you do it manually.
    http://help.sap.com/saphelp_nwpi711/helpdata/en/45/c571de75105709e10000000a114a6b/frameset.htm
    see --> Configuring a Domain
    Best Regards,
    Ervin

  • Configuring NWDI and CMS

    Hi,
    We did a Development portal installation (DEV) with NMDI and finished the DI post installation in the DEV system and configured my SLD in solution manager. Now we are going to install Portal Quality system (QAD) with NWDI. I need some documents after installing QAD system, like DI post installation and CMS configuration from quality to development system. I mean to say that, DEV as a Domain controller and QAD to include in that CMS. Before doing the DI post installation in QAD, do I need to change the Domain data of change management in Quality like CMS name, CMS url, CMS user, password, trans dir, Domain ID(if so,Can we change this ID to DEV), DTR url, CBS url. If so, do I need to give the datau2019s of Development system? or how to configure my quality system CMS to development system CMS. I found some links but there is no link that says about the configuration in development.
    Thanks
    Regards,
    Ral

    Hi Narendra.
    Thanks for reply.
    While defining Software Component, I created a Build Time Dependency on these components and chosen SAP-JEE, SAP_BUILDT and SAP_JTECHS components.
    While defining a Track under Domain in CMS (Landscape Configuration) i am not getting these dependent components under my SC.
    So after adding SC to my track, i again Defined Dependencies on my SC. Now i can see these components under my SC but gives warning that "SC Dependencies are different but accepted by synchronization" and status of SC is yellow.
    Please suggest.
    Mandeep Virk

  • Need advise on Installation and Configuration NWDI frame work.

    Our SAP R/3 is  4.6C and here at nVidia we are very new to SAP Netweaver world, we have already implemented EP 6.0 and XI on NW04 SP 13 and we are very close to go production.
    Going forward we are planning to implement ESS, MSS, xRPM 4.0, CRM 5.0 with some customization to use the features like Guided Procedures(workflow capabilities outside of R/3), Composite Application Framework, Mobile Infrastructure for Help Request, workflow, myCRM etc. Apart from this, our custom developed intranet runs on .NET and some day it will move into SAP EP.
    We are currently planning on building our Development Infrastructure (i.e. SLD->NWDI-> Dev->Qa->Prod) to implement  above mentioned new product with some customization.
    Currently our EP6 and XI are on NW04 SP 13, but we heard that Guided Procedures, Composite Application Framework only works with SAP NetWeaver 2004s and Mobile Infrastructure need Dual stack (ABAP + Java addin).
    So we are currently little confused on how to build our development infrastrucre to support above products and any advise is highly appreciated.
    1. Should the Development, Congregate, QA, Production machines have WAS 6.4 J2EE or WAS 6.4 with (ABAP + Java Addin) to support both custom java & ABAP development, at this point we are only planning on developing/customizing Java based apps/components.
    2. We also need to Install Mobile Infrastructure, so should our MI go on top of Development, Congregate, QA, Production machines, in which case it needs to be WAS 6.4 with (ABAP + Java Addin) and not just J2EE stack, because MI needs both stacks Or should the MI be on its own boxes and configured to connect to NWDI servers.
    3. We heard that Guided Procedures, Composite Application Framework only works on net weaver 2004s, in which case should our development infrastructure be build on net weaver 2004s or NW04 SP 13.
    4, If we go with NW04 SP 13, will there be a path to upgrade to net weaver 2004s so that we can implement Guided Procedures, Composite Application at a later point.
    5. How will net weaver 2004s work with our current EP & XI infrastructure which run on WAS 6.4 sp13
    Once again your help is appreciated.
    -Shivpal Reddy
    [email protected]

    Hi,
    I'd say - Stick to your plan and configure all InternalURLs to be the same as the ExternalURL, the name you have in your certificate. The same goes for AutodiscoverServiceInternalUri. The key is to have Split DNS set up
    See: http://support.microsoft.com/kb/940726
    That is what most people do, even the one that can add their internal FQDN name to the certificate.
    Understanding Digital Certificates and SSL
    http://technet.microsoft.com/en-us/library/dd351044(v=exchg.141).aspx
    Martina Miskovic

  • Error in NWDI configuration using template

    Hi experts,
    I am trying to configure NWDI using template DI all-in-one.I am getting an error in the middle.
    error :The transport folder "/usr/sap/trans/EPS/in/CMSeoepdevEPD" couldnot be created (cannot access inbox directory :/usr/sap/trans/EPS/in/CMSeoepdevEPD/CMS/inbox)
    No idea of why this error is coming.I am new to NWDI.
    Can somebody explain me why this error is coming?
    Thanks in advance ,
    Regards,
    Rajesh

    Hi
    the error is related to the OS folder which u cannot able to access, pls check the folder (/usr/sap/trans/EPS) exists or mounted. if you are able to access the content in /usr/sap/EPS/in----
    pls give 777 or fullcontrol permissions to /usr/sap/trans/EPS/In folder , 
    your basis administrator may help you in this regard.
    jo

  • NWDI in E.P 7.0 Configuration Problem

    Hello Everyone,
    I have Selected 'DI' While Installing SAP and for Configuring
    NWDI I have run the DI Template in SAP Netweaver Adminstration. Imported the Configuration in NWDS in DevelopmentConfiguration Perspective.
    1.While creating the DevelopmentComponent in Development Configuration Iam getting the following error
    "Development Component Creation Completed with some problems.Reason:some used DC's are not available locally.you have to synchronise useddc's for this project"
    2.While Creating the WebdynproComponent in Webdynpro Perspective
    "Webdynpro Component is build with some build Errors.some jar files are missing and when I saw the source code,errors are there with sap.com cannot be resolved"
    3.While Deploying
    "com.sap.tc.webdynpro.services.exceptions.WDRuntimeException:Failed to create delegate for sapxyz.compxyz:no suitable constructor"
    Please help me in resolving the problem.
           Thanks in advance
    Regards
    Kiran

    Hi,
    May be your java version or NWDS version mis match.
    Try in another PC with correct version of java and NWDS.
    Make sure you set the environment variables in your system.
    Thanks and Regards,
    gopal.sattiraju

  • Configuration of NWDI

    Hello Everyone,
    I am facing extreme problems in configuring NWDI  for my landscapes..
    Please guide me how excatly the config. takes place in the server and as well in developer studio i.e., if i develop a local DC how can i do the Check-in..what deployed component libraries are required on the server and if i need additional libraries where can i find them..
    Urgent..
    Points will be awarded for sure..
    Regards,
    Abhishek

    Hi ,
      Can you please send the same NWDI doc. Do you know how NWDI can effectively used for webdynpro transports. my mail id is [email protected] or
    [email protected]
    I  will surely reaward 10 Points bcoz you are so many like me who are much beginners in NWDI.
    Thanks
    Ramachandran S

  • NWDI Configuration Wizard.

    I am currently following the steps in the "Configure NWDI in MII" and I am getting an error message in the initial stage of the installation. 
    I have navigated to http://<server>:<port>/nwa/cfg-wizard and I have clicked on Initial setup of functional unit SLD.
    I selected typical configuration and entered my pwds.
    I selected Setup a new local SLD server and used my server as the ObjectServerName
    It fails after I press Next.  the following is the error...
    Error: Notification
    Error: Connect to message server host failed
    Connect_PM  TYPE=B MSHOST=dixon.apex.ray.com GROUP=RPD R3NAME=RPD MSSERV=sapmsRPD PCS=1
    ERROR       service '?' unknown
    TIME        Wed Jan 26 10:26:35 201
    RELEASE     711
    COMPONENT   NI (network interface)
    VERSION     39
    RC          -3
    DETAIL      NiErrSet
    COUNTER     2
    Step: Create group SAP_SLD_DATA_SUPPLIER
    Retry StepSkip StepCancel Process
    What is wrong with the configuration or what should I be looking at to correct this?

    Hi,
    I belive this has no NWDI relation so far.
    I think you need to ask around in a different forum what is wrong when accessing the message server:
    Error: Connect to message server host failed
    Connect_PM TYPE=B MSHOST=dixon.apex.ray.com GROUP=RPD R3NAME=RPD MSSERV=sapmsRPD PCS=1
    Best Regards,
    Ervin

  • Configuration od NWDI

    Hi All,
       We need to configure NWDI for my Client
       I need procedure to configure NWDI in Admin side
       which stepd to need fallow and I want to know from starting point i.e installation part also
        and  connection  with Webdynpro java to NWDI
        Cretion of Tracks , DC's  Common libraries etc..
        If any body have good knowledge please share ..
    Thanks
    Renu

    Renu,
    Go through this doc. http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f04a930b-893f-2b10-1bb1-85fcd51030aa
    It lists out NWDI admin configuration as well as track creation.
    Hope it helps,
    Ameya

Maybe you are looking for

  • Query on Microsoft Windows 8.1 Pro Upgrade Licensing

    I am upgrading from Windows XP OEM to Windows 8.1 Upgrade paper license. Does these upgraded paper of  Windows 8.1 would still be valid if I discard OEM machine after 1-2 year? Or upgrade license would be legally invalid once actual machine will be d

  • IPhone synch after hard drive failure

    I have an iMac 7.1 and after a total hard drive failure I had a new drive installed. Everything was wiped out, but at least I have the iTunes library still on my iPhone Here starts the problem. After reading posts for the better half of a day I tried

  • Age Analysis report

    Hello Experts !!!! My Client requires a Stock Age analysis report . It is a trading company of steel . my client wants to know that how old my stock is in warehouse or how much is 30 days old ,60 days old ,90 days old. Below is my query SELECT  T0.IT

  • When remote database used in DB Link is down, JDBC hangs

    Hello! I have DB Link defined in my Oracle DB I work with from JSP application which uses Tomcat's connection pool. When remote DB is available, everything is fine. But when it goes down (I explicitly shut it down with "shutdown immediate"), JDBC cal

  • IPhoto and Adobe Elements 8

    Hi, I want to migrate my Elements 8 (Windows XP)databas to iPhoto. Is that possible? Without new indexing (24000 Photos). THX for respons. Michael