Configure OEM on Oracle Failsafe 3.4.2 (11g R2) on windows 2008

Hi Friends,
Please let me know how to configure Oracle Enterprise Manager(OEM) On Oracle Failsafe 3.4.2 (11g R2 Database) on windows 2008.
I found a Metalink Note : 396659.1 but i am unable to open the Note.
Please provide the Proper Note.
Regards,
DB

I have the same problem.
My solution is:
1.add OFS group name mapping VIP in DNS
2.add VIP in MSCS manager
3.delete VIP in OFS manager
4.add VIP in OFS manager

Similar Messages

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Configure oem on oracle 10g

Hi,
I am trying to configure oem in 10..2.0.3 database, but it gives me the below error
emca -config dbcontrol db -repos createIncorrect usage:
oracle.sysman.emcp.EMConfigAssistant [options] [list of parameters]
Options:
-a :configure for an ASM database
-b :configure for automatic backup
-c :configure a cluster database
-e <node> :remove a node from the cluster
-f <file> :specify the file name that contains parameter values
-h :help
-m :configure EM for a central agent
-n <node> :add a new node to the cluster
-r :skip creation of repository schema
-s :silent mode (no user prompts
-x <db> :deletion of a SID or DB
-RMI_PORT <port> :specify the RMI port for DB Control
-JMS_PORT <port> :specify the JMS port for DB Control
-AGENT_PORT <port> :specify the EM agent port
-DBCONSOLE_HTTP_PORT <port> :specify the DB Control HTTP port
The script will prompt for any required data that is not specified in a configuration file. The script always prompts for all required passwords. If you use a configuration file, the file may contain any of the following specifications, as shown, with the specified values correctly filled in:
Parameters for single instance databases:
HOST=<Database hostname>
SID=<Database SID>
PORT=<Listener port number>
ORACLE_HOME=<Database ORACLE_HOME>
LISTENER=<Listener name>
HOST_USER=<Host user name for automatic backup>
HOST_USER_PWD=<Host user password for automatic backup>
BACKUP_HOUR=<Automatic backup hour in number>
BACKUP_MINUTE=<Automatic backup minute in number>
ARCHIVE_LOG=<Archive log>
EMAIL_ADDRESS=<Email address for automatic notification>
MAIL_SERVER_NAME=<Email gateway for automatic notification>
ASM_OH=<ASM ORACLE_HOME>
ASM_SID=<ASM SID>
ASM_PORT=<ASM port>
ASM_USER_ROLE=<ASM user role>
ASM_USER_NAME=<ASM user name>
ASM_USER_PWD=<ASM user password>
EM_HOME=<Enterprise Manager ORACLE_HOME>
DBSNMP_PWD=<Password for dbsnmp>
SYSMAN_PWD=<Password for sysman>
SYS_PWD=<Password for sys>
Parameters for cluster databses:
HOST=<Database Instance hostname>
PORT=<Listener port number>
LISTENER=<Listener name>
ORACLE_HOME=<Database ORACLE_HOME>
CLUSTER_NAME=<Cluster name>
DB_NAME=<Database name>
SERVICE_NAME=<Service name>
HOST_USER=<Host user name for automatic backup>
HOST_USER_PWD=<Host user password for automatic backup>
BACKUP_HOUR=<Automatic backup hour in number>
BACKUP_MINUTE=<Automatic backup minute in number>
ARCHIVE_LOG=<Archive log>
EMAIL_ADDRESS=<Email address for automatic notification>
MAIL_SERVER_NAME=<Email gateway for automatic notification>
ASM_OH=<ASM ORACLE_HOME>
ASM_PORT=<ASM port>
ASM_USER_ROLE=<ASM user role>
ASM_USER_NAME=<ASM user name>
ASM_USER_PWD=<ASM user password>
EM_HOME=<Enterprise Manager ORACLE_HOME>
DBSNMP_PWD=<Password for dbsnmp>
SYSMAN_PWD=<Password for sysman>
SYS_PWD=<Password for sys>
Please suggest
Regards

it seems database install was not successful some binaries is missing in your OH.
Can you check by installing another database

Configuring OEM in oracle 9i version

In oracle 10g we can use emca command to configure oem..
is there any command to configure oem in 9i data base .

Yasser, -prelim is feature of Sql*Plus 10g and latter.
So as long you have any Sql*Plus 10g or latter version (ex. from client installation) and a valid net service name to connect to your 9i database you should be able to establish a "backdoor" connection.
You can do the following:
$sqlplus -prelim /nologand once you are in, just connect to the database using SYSDBA account
SQL> connect sys/password@net_service_name as sysdba
Prelim connection establishedCheers,
Mihajlo

Oracle 11g RAC on Windows 2008 R2 VMware EXS 3.5 virtual machines

Hi,
We are planning to Install Oracle 11g R2 RAC on two VMware EXS 3.5 Windows 2008 R2 servers.
Having trouble while assigning the storage to the servers, the Raw Device Mapping feature in the VMware is greyed out and we cannot assign the disks to the Virtual servers, the disks are allocated to the Vmware Host machine from the SAN (HP EVA).
Please guide me the best approach for the RAC configuration on VMware EXS 3.5 Win 2008 R2 Guest servers.
any help will be highly appreceiated.
Thanks.

Hi,
Is this implementation to production environment?
Be aware:
Is Oracle RAC on VMware supported? No, we do not support Oracle Software including Oracle RAC on VMWare.
Aside from the support restrictions for the database on VMWare outlined in Metalink Note 249212.1, there are technical restrictions that prevent the certification of Oracle RAC in a VMWare environment.
*RAC: Frequently Asked Questions [ID 220970.1]*
Having trouble while assigning the storage to the servers, the Raw Device Mapping feature in the VMware is greyed out and we cannot assign the disks to the Virtual servers, the disks are allocated to the Vmware Host machine from the SAN (HP EVA).Check if below can help you.
http://vmzare.wordpress.com/2007/02/19/vmware-raw-device-mappingrdm/
Regards,
Levi Pereira

Install and uninstall of Oracle 11g R2 on Windows 2008 Server

Hi,
I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
[5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
Questions:
What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
What do I need to do to ensure a re-install is successful?
Uninstalling Oracle -
1.     Log in as the Administrator.
2.     Stop all Oracle Services.
3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4.     Delete the C:\app\oracle directory.
5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Oracle 11g on CITRIX ( windows 2008 R2 ) OS batch file call fails

Hello Sir/Madam,
I've been using HOST built-in to invoke a command window to call another application from my oracle application form. The application is GFS Forms 6i on Oracle 11g db w/ XP OS. This logic works.
--XP OS logic:
declare
cmd varchar2(200);
url varchar2(200) := 'C:\PROGRA~1\ADVANT~1\GFS\start_grids_with_coords_pd.bat';
location1 varchar2(100);
location2 varchar2(100);
     begin
          go_block('GAS_SERVICES');
     location1 := substr(:gas_services.location_coord, 1, 5);
     location2 := substr(:gas_services.location_coord, 6, 5);
          tool_env.getvar('comspec', cmd);
     host('cmd /c start '||url ||' '||location1||' '||location2);
     end;
Now, we are upgrading to W7 OS also, we would like use this function on CITRIX ( Windows server 2008 R2 ) server. For some reason, we are encountering errors when tilda /( squiggly ) line is used or a double quote
-- CITRIX/W7 logic:
declare
cmd varchar2(200);
url varchar2(200) := 'C:\PROGRA~2\ADVANT~1\GFS\start_grids_with_coords_pd.bat';
location1 varchar2(100);
location2 varchar2(100);
     begin
go_block('GAS_SERVICES');
     location1 := substr(:gas_services.location_coord, 1, 5);
     location2 := substr(:gas_services.location_coord, 6, 5);
tool_env.getvar('comspec', cmd);
     host('cmd /c start '||url ||' '||location1||' '||location2);
     end;
I'll appreciate your help!
Regards,
Vani Sonti
Edited by: user11141511 on May 21, 2013 1:46 PM

Hello,
Have you tried using long filename instead of short filename ? When using long filename, you need to enclose it with double quotes.
Exemple :
url varchar2(200) := 'C:\PROGRA~1\ADVANT~1\GFS\start_grids_with_coords_pd.bat';
become
url varchar2(200) := 'C:\PROGRAM FILES\ADVANT_WHATEVER HERE\GFS\start_grids_with_coords_pd.bat';
and
host('cmd /c start '||url ||' '||location1||' '||location2);
become
host('cmd /c start '|| chr(34) || url || chr(34) || ' '||location1||' '||location2);
This work fines with Forms 6i on Windows 2003 and Citrix, but didn't try on Windows 2008.

Which Oracle client to use? with CRS2008 on Windows 2008 R2 64bit

Hi,
We are setting up a standalone Crystal Reports 2008 Server on Windows 2008 R2 64bit. This server will serve some reports that will pull data from an Oracle 11g DB. Several Oracle 10g/11g, (32bit or 64bit) DB client has been tried, but CRS cannot connect to the oracle DB using any of them. Which oracle client is known to be working well on this setup?
CRS 2008 <> Windows 2008 R2 64 bit <> Xeon E5600 series machine
Thanks,
Steve

Hello,
CRS2008 v1 supports Oracle 9.2, 10g R1, 10G R2 and 11g R1.
The client to use on those version are the same as the server meaning if you have a 11g R1 server then you can use an Oracle Net Client 11G R1. But you can use also a JDBC, ODBC, OLEDB Oracle 11G R1.
If you have a CRS2008 v0, then Oracle 11G is not supported. Only 9.2, 10g R1 and 10G R2.
I hope this will help you
Regards,
Philippe

Oracle Warehouse Builder 10.1.0.4 on Windows 2008 - 64 bits

Hi Gurus.
I'm currently working with a customer who wants to migrate all their database-servers to Windows 2008 on 64-bits processors. They're using Oracle Database Enterprise Edition 10g Release 2 (10.2.0.4) and Oracle Warehouse Builder (10.1.0.4). The OWB-clients will still run on Windows XP. I've used the "Certify"-funcionality on Metalink, but it doesn't really answer my questions. (It does* ansver some of my questions, but it also raises a few new ones....)
My main question is: Can you run serverside OWB 10.1.0.4 on Enterprise Edition 10.2.0.4 for Windows 2008 64-bits?
Thanks in advance:-)
Best regards
Helge
Edited by: user613304 on Mar 6, 2009 11:10 PM

No.
Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
The desupport notice is available on Metalink (Note 376384.1).
The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.

Upgrade ASM Oracle 10.2.0.4.0 to ASM Oracle 11G R2 on Windows 2008 SP2

Please advice on procedure or where I can find information on upgrading ASM from Oracle 10G to Oracle 11G R2 (Winwdows 2008 SP2 64bit environment) for mutiple Oracle instances (not a RAC environrment).
The current scenario is as follow:
- Two oracle homes; one for ASM instance and another for the Oracle Databases (in current case only two oracle instances possiblly more at a later time). Both (ASM and Oracle databases) have the same version of Oracle 10.2.4.0.
The Oracle database home can't be upgraded due to application restricition (Vendor Application not tested on Oracle 11G) but will like to upgrade the ASM instance to Oracle 11G (Oraclle 11G R2).
Questions:
- Is is a feasable solution? Can I upgrade ASM instance to Oracle 11G R2 to take advantage of new features? Will the ASM upgrade scenario is compatible with the Oracle Database Instance running Oracle 10G? Any possible issues that I should be aware or concerns?
Is it possible to have ASM running in Oracle 11G R2 and service the need of Oracle database instance running in 10G?
Please advice or where I can obtained information on the matter. Also possibly if someone has done it on Windows 2008 SP2 (not Windows 2008R2).
Thanks in advance

Thanks so I can upgrade the ASM Home instance and leave the Oracle Databases home on Oracle 10.2.0.4.
I agree with you not just 100%, actually 120%. Fortunately, the vendor is finally understanding by pressure provided by DBAs and Application Teams that they are very behind the curve. It is working and by summer we should have an oracle 11G compatible product.
The same thought went when I was told of their compatability database level.
Regards
Albert

Oracle 11g 2 sobre Windows 2008 64 bits

Hola a todos... tengo el siguiente problema.... cuando instalo Oracle 11g sobre Windows 2008 de 64 Bits aparece un error en la instalacion.... me dice error de protocolo.
Se intala sobre Windows 2008 de 64 Bits con un dominio
Ademas cuando no carga el EM
Saludos
Jorge

No.
Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
The desupport notice is available on Metalink (Note 376384.1).
The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.

Installation of Oracle 10.2.0.3 on 32 bit windows 2008

I am trying to install oracle 10g on windows 2008. The installation process went smooth until it reached creating database. At that point when it reached 2% I am getting an error Ora 12560: TNS protocol adapter error. I tried to download the patch file 10.2.0.3 but i am not getting in to the metalink. Is this error related to the patch file? if so where can i get that patch file from?

hi,
i'm having the same issue.
so far, I realized that:
- bug number for this problem is 7263061
- patch for this bug seems to be number 7677780
(Opatch also needs to be upgraded, via patch 6880880)...
BUT (yes, there's a BUT...)
that patch applies to 10.2.0.4 base system, while Oracle.com indicates 10.2.0.3 for installing on a windows 2008 server 32bit, and I have a that windows 2008 server which is also domain controller, and need to install oracle on it.
SO... I'm stuck.
Still I haven't found a patch for 10.2.0.3 system.
I'm searching, anyway...
anybosy with a solution that applies?
thanks in advance!
cheers
Bernardo Volpi
bernardo (dot) volpi (at) publicatoscana (dot) it

Oracle 11g Client on Windows 2008 6.1

Hi All,
Is Oracle Client 11.1.0.7.0 certified on Windows 2008 6.1 OS??
Thanks
SR

Only 11gR2 is certified on Windows 2008.
http://download.oracle.com/docs/cd/E11882_01/install.112/e10844/pre_install.htm#CIHIAGFG

Oracle EBS Cloning - RAC to Non-RAC on windows 2008

Kindly note that my Client is currently running Oracle E-Business Suit R12.1.1 + 11.2.0.2 on Windows
Server 2008R2 on RAC + ASM.
I have been requested to perform the Clonning of the Production to Test Enviroment from RAC to non
RAC?
I have gone through the note id Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1] which
says that Oracle E-Business Suit R12.1.1 is not supported for RAC to RAC or RAC to non RAC Clonning?
Please advise whether the Clonning is possible from RAC to non RAC enviroment on Windows 2008 R2 for
R12.1.1 + 11.2.0.2?
What is the possible risk if I go ahead with the same Oracle non supported Enviroment ?

R12 clone with RMAN auxiliary db.

Accessing a 32 Bit Oracle 9.2 database from a 64 bit Windows 2008 Server

Hi Guys,
I hope someone might be able to help me I am trying to extract data from our existing oracle 9.2 Database onto our new 64 bbit 2008 server. The problem I seem to be having is that no matter what version of Oracle I try to install I'm not able to see any oracle Drivers in the ODBC\ODBC32 section.
I have tried both the 32 bit Oracle 10g ODAC 10.1.0.4.0 and Oracle 11g ODAC 11.1.0.7.20 with no luck, hopefully some one can point me in the right direction. I don't tthink installing the 64 bit would work as the database is 32 bit is this correct or should I be using the 64 bit.
Thanks in advance
D0n_mac

Hi,
You need to install 64 bit client if you're going to use it with a 64 bit app. You dont need to worry how many bits the server is, the client takes care of that.
Hope it helps,
Greg

Configure OEM on Oracle Failsafe 3.4.2 (11g R2) on windows 2008

Similar Messages

Maybe you are looking for