Configure Oracle 10g in Netbeans 6.9

Hello,
How can we configure Oracle 10g Version of Oracle Database with Netbeans 6.9 IDE , So that we can directly connect database with the IDE

First you will need the Oracle driver found in the file ojdbc16.jar.
In NetBeans go to the Services tab and select the Databases->Drivers node in the tree. Right-click and select New Driver. Find the jar file above and it should recognize the driver class for you (if not it is oracle.jdbc.OracleDriver).
Then right-click on the Databases tree node and select New Connection. Select the Oracle driver in Driver Name and fill in the connection parameters.

Similar Messages

How to configure Oracle 10g to use 4GB memory

I'm trying to configure Oracle 10g to use >4GB memory. Have configured server boot.ini with required flags (/3GB /PAE). Rebooted server then created standard database, then connected to db instance and changed oracle parameters DB_BLOCK_BUFFERS, USE_INDIRECT_DATA_BUFFERS as required. Restarted DB instance, DB fails to restarted with SGA memory error. According to oracle user docs the SGA is nolonger in effect due to previous settings. Can you provide example of SPFILE with parameters settings that do work and use >4GB memory. Current server has 8GB, 2 x Dual XEON core/processors (i.e. 8 processors)

The recommended /3GB switches in the boot.ini file can only be used with the following operating systems editions (KB article 291988):
Microsoft Windows 2000 Advanced Server
Microsoft Windows 2000 Data Center Server
Microsoft Windows Server 2003, Enterprise Edition
Microsoft Windows Server 2003, Data Center Edition
Microsoft Windows Small Business Server 2003
Important: Windows 2000 and 2003 Server Standard Editions DO NOT SUPPORT /3GB Switch.
So if your OS is listed above, then you cannot have a larger SGA.

How to configure Oracle 10g RAC on windown sever 2003

hi all
plz tell me
how to configure Oracle 10g RAC on windown sever 2003 can any body help me , give be any link
plz it is very necessary for me
Regards

Hello,
There are a good doc written by Philip Newlan at www.jobcestbon.com/oracle/RacOnWindows.pdf
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

How to configure Oracle 10g Advanced Security to use SSL concurrently with

How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
Basically we want SSL with out authentication.
Need your expert advice

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

Configure Oracle 10g Forms 9i for XML

How do I configure Oracle 10g Forms 9i to compile XML code? Is there a particular configuration file I need to update with .jar files that references XML processing or parsing?
Thanks!

There is a java utility that can take an XML file that you have generated from an fmb file previously and compile it back to an fmb file.
Its called frmxml2f.bat. You'll find it in $Oracle_home/bin

How to configure oracle 10g with clients

Hello sir i am a database user.
I want to install an oracle 10g (Client server architecture)
As i have a licenced Oracle 10g CD Pack.
Pls help me how to install Oracle & how to configure its clients.
As i have a server(running server 2003 ) in it and corresponding clients.
Thanks
Edited by: user10439074 on Oct 30, 2008 4:03 AM

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

Can not configure Oracle 10g form on oracle 11g client

Hi
I need to install oracle 10g form in my system .
Here is my system
1. OS --XP
2. 32 Bit
4. Already oracle 11g release client installed ( I think that create the problem )
I tried to install oracle 10g form , it installed but can cont configure net manager for it , Always it point to 11g client and hence I could not configure .
Also I tried install Oracle Forms first then 11g client , But I got same issue .
I think if I created multiplr home one for 11g client and other for forms , it may work out .
Please help me
Debashis

While deploying the example 'VacationRequest' in the oracle complete guide for 11g, i got an exception like this
"12:08:15 PM] Deploying Application...
[12:11:16 PM] [Deployer:149191]Operation 'deploy' on application 'VacationRequestTaskFlow' is initializing on 'soa_server1'
[12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[12:11:24 PM] [Deployer:149193]Operation 'deploy' on application 'VacationRequestTaskFlow' has failed on 'soa_server1'
[12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: Failed to load webapp: 'VacationRequestTaskFlow.war'.
[12:11:24 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
[12:11:24 PM] Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
[12:11:24 PM] See server logs or server console for more details.
[12:11:24 PM] weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
[12:11:24 PM] #### Deployment incomplete. ####
[12:11:24 PM] Deployment Failed"
Can anyone help in this.

How to install and configure Oracle 10g Express Edition on Fedora 11?

Hi everyone!
I have recently installed Oracle 10g XE on my Laptop Gateway T-1625, which has Fedora 11.
I followed the install instructions on [http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm] , and configured the server as explained, but something is wrong... When I try to go to the database home page http://127.0.0.1:8080/apex, I get "Failed to Connect" on Firefox 3.5b4... I don't think it's because of the Firefox version because it's proved to be very stable (for a beta).
I've search for similar issues on GNU/Linux and I found this thread in these forums: [ http://forums.oracle.com/forums/thread.jspa?threadID=915218&tstart=0] , but the solution is for Ubuntu 9.04, and if it's possible I would like to know a specific solution for Fedora 11.
I also tried to see the oracle server status with:
# /etc/init.d/oracle-xe status
And I got this....
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2009 22:10:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=talos)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
I hope someone can help me out and guide me on the right direction. Thanks a lot!

Hi again!
After your last post I realized that the dba group and the oracle user already existed.
#groupadd dba
groupadd: group dba exists
#useradd oracle -d /home/oracle -s /bin/bash -g dba
useradd: user oracle existsHowever, I finally assigned a password for that account and changed the ownership of the /usr/lib/oracle/xe
with the commands you suggested:
passwd oracle
chown -R oracle:dba /usr/lib/oracle/xeAfter this, I can log in as the oracle user but the SELinux showed a warning and the /usr/lib/oracle/xe
is treated as the oracle home, and no .bashrc file is located on this home. This is the SELinux warning:
SELinux is preventing gdm-session-wor (xdm_t) "write" to /usr/lib/oracle/xe (lib_t).
Details:
SELinux denied access requested by gdm-session-wor. /usr/lib/oracle/xe may
be a mislabeled. /usr/lib/oracle/xe default SELinux type is user_home_dir_t, but its
current type is lib_t. Changing this file back to the default type, may fix your problem.
File contexts can be assigned to a file in the following ways.
* Files created in a directory receive the file context of the parent
directory by default.
* The SELinux policy might override the default label inherited from the parent directory
by specifying a process running in context A which creates a file in a directory
labeled B will instead create the file with label C.
An example of this would be the dhcp client running with the dhclient_t type and
creates a file in the directory /etc. This file would normally receive the etc_t type due
to parental inheritance but instead the file is labeled with the net_conf_t type
because the SELinux policy specifies this.
* Users can change the file context on a file using tools such as chcon, or restorecon.
This file could have been mislabeled either by user error, or if an normally confined
application was run under the wrong domain.
However, this might also indicate a bug in SELinux because the file should not have
been labeled with this type.
If you believe this is a bug, please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi)
against this package.
Allowing Acces:
You can restore the default system context to this file by executing the restorecon command.
restorecon '/usr/lib/oracle/xe', if this file is a directory, you can recursively restore using
restorecon -R '/usr/lib/oracle/xe'.
Fix command:
restorecon '/usr/lib/oracle/xe'I suppose the command #useradd oracle -d /home/oracle -s /bin/bash -g dba is where I can define the user's home, but if this user already exists how can I modify its settings?
is SELinux preventing the .bashrc file to be created? or what could be causing this?.
I hope you know how much I appreciate your help and want to thank you for your time.

Time synchoronization while configuring Oracle 10g RAC

I am installing Oracle 10g RAC on 3 EHEL5.0 systems. The problem is the time can not be synchoronized although I had already enaled the Network Time Protocol and let all the related servers to be synchoronized with the same NTP server.
I want to know why the time cannot be synchoronized on different servers?

Time synchronization with RAC is critical. Oracle will refuse to install if you do not perform this step.
You have three choices. The more risky one is to configure access to an external time server. I don't like this because it does create a path between my data server and the internet. The second is to build a time server in our data center that you reference. This is the best option as you can, and should, use that server for synchronize everything which is a great help with replication. The third choice is to arbitrarily choose one node and synchronize the other nodes with it. The downside is that if you lose that node you are at risk.
There are plenty of instructions on how to create a time server on the internet but no matter which choice you make ... you will need root privs on operating system to configure it.

Can we configure Oracle 10g xe so that it accept date in yyyy-mm--dd format

I am facing problem in inserting and updating data in oracle server through jdbc. its java.sql.Date class sends date in yyyy-mm-dd format while oracle requires date in dd-mmm-yy format. can we configure oracle server in such a way that we may send date in yyyy-mm-dd format to insert and update?

People should be sure of their information before
posting, even more so if they have an Oracle Ace
credential,as they're more likely to be believed. Not sure what you are saying.
The way I read it, Avi stated that overriding the NLS_DATE_FORMAT as an initialization parameter WILL NOT affect the way XE works, and you still need to set the parameter at the session level.
This is true.
As demonstrated here, where I
- startup my XE (SuSE 10.1 Pro/Linux),
- show the NLS setting,
- log on to a regular user, -
- show the system date,
- change the NLS_DATE_FORMAT system wide by updating my PFILE,
- restart the database
- show the NLS_DATE_FORMAT
- extract the system date.
As you see from the console session, the date still comes out in the format defined by the NLS_TERRITORY, in spite of what the global NLS_DATE_FORMAT indicates.
fcc@fuzzy:~> su - oracle
Password:
oracle@fuzzy:~> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jul 6 08:06:05 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 448790528 bytes
Fixed Size                  1259400 bytes
Variable Size             134219896 bytes
Database Buffers          310378496 bytes
Redo Buffers                2932736 bytes
Database mounted.
show parameter nls_date
Database opened.
SQL>
NAME                                 TYPE        VALUE
nls_date_format                      string
nls_date_language                    string
SQL> connect test/test
Connected.
SQL> select sysdate from dual;
SYSDATE
06-JUL-07
SQL> alter session set nls_date_format='YYYY Mon DD';
Session altered.
SQL> select sysdate from dual;
SYSDATE
2007 Jul 06
SQL> connect / as sysdba
Connected.
SQL> select sysdate from dual;
SYSDATE
06-JUL-07
SQL> create pfile='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/xe.pfile' from spfile;
File created.
SQL> !vi /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/xe.pfile
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup pfile=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/xe.pfile
ORACLE instance started.
Total System Global Area 448790528 bytes
Fixed Size                  1259400 bytes
Variable Size             134219896 bytes
Database Buffers          310378496 bytes
Redo Buffers                2932736 bytes
Database mounted.
Database opened.
SQL> connect test/test
Connected.
SQL> connect / as sysdba
Connected.
SQL> show parameter nls_date
NAME                                 TYPE        VALUE
nls_date_format                      string      YYYY Mon DD
nls_date_language                    string
SQL> connect test/test
Connected.
SQL> select sysdate from dual;
SYSDATE
06-JUL-07
SQL>

CONFIGURING ORACLE 10G APPLICATION SERVER

HOW TO CONFIGURE 10G APPLICATION SERVER

Hi,
HOW TO CONFIGURE 10G APPLICATION SERVERRefer Links:
http://download-uk.oracle.com/docs/cd/B14099_19/getstart.htm
http://www.oracle-base.com/articles/10g/OracleAS10g3InstallationOnRedHatAndCentOS.php
Regards,
X A H E E R

Heterogenous Standby Configuration - Oracle 10g

Hi All
I was searching on net to find out if a Heterogenous Standby Configuration could be achieved in Oracle Database Server 10.2.0.4.0?
We have our production Database running on Windows 2003 Server EE running on Dell PowerEdge. Its a two node RAC Database running Oracle database Server EE 10.2.0.4.0.
For this set-up, could we look at having the standby on another server running SUSE Linux. If this is possible, we would be able to proceed with out actually procuring another hardware and also make use of this Linux machine which is failry under utilised at the moment.
From your experiences, could you please advice if this is a sensible way. If such a set-up is existing, it could help from your experiences off what we could expect in terms of pitfalls and so on which you might want us to consider before making a decision this way?
Many thanks for your recommendations in advance.
Regards!
Sarat.

Agreed.. As I was goind through some other posts on the net, I understand this Heterogeneous Standby Configuration is a new feature in Oracle database 11g ...
We might also need to look at that possibility.. however, if there is a place which I could refer to and make some quick notes on such mixed OS configurations, it helps alot... I may also want to go through the 11g documentation meanwhile..
Sarat.

ODBC Driver configuration - Oracle 10g

Hi,
When I tried to create a system DSN using windows XP ODBC for oracle, get the following error.
Unable to connect
SQLState-IM003
Specified driver couldn't be loaded due to system error 998(Oracle in OraDb10g_home1).
Please anyone can help.
Regards

Check this previous thread:
ODBC error
Werner

Error when trying to configure Oracle 10g Personal Edition

seemingly task is never ending. request oracle to make better products.
Here is the error message I get when attempting an install on a Windows XP Professional laptop.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Any ideas????

Dunno. Sounds firewall related though.

Configuring Oracle EAServer 10g 10.1.2.0.2 with Eclipse

Hi ,
Am working on a JAVA/J2EE/Struts application using Eclipse 3.1 and am using
Oracle Enterprise Manager 10g Application Server 10.1.2.0.2 for deploying the application. Currently am building my application to an ear file and then deploying it manually on the Application Server control to run it every time. Becouse of this am not able to debug the application through eclipse. I need to know whether we can configure Oracle Enterprise Manager 10g 10.1.2.0.2 Enterprise Application Server with Eclipse 3.1 just as we are doing with eclipse tomcat or eclipseweblogic so that i can directly run or debug the application from Eclipse instead of creating a an ear and deploying it to the server to run it. Am using Oracle application server for the first time.
I tried searching but couldnt find any relevant document /info on this. I got some info on configuring Oracle 10g Application Server 10.1.3 with eclipse,but none about 10.1.2.0.2.
Any help regarding this is appreciated
Thanks in advance
grate

Hi Steve,
Thanks for your reply. Am new to Oracle application server. The version that i mentioned ie. 10.1.2 was already installed in my laptop when i got it for working. Am configuring the deployment and JNDI services after i start the sever and bring up the server control through IE after entering the username and password. So i couldnt understand the relevance of a standalone server at this point, and i am new to the name OC4J , why is it called so?(am sorry if am asking any stupid question, but to be frank i dont know any thing about oracle application server untill i came across it recently ) . The document that you followed is the same one that me too found while searching in net. But i couldnt follow the steps becouse in eclispe when i tried to configure the server runtime its throwed error saying it couldnt find any folder in the 10.1.2 installion directory named "...../home/j2ee" . But there was a folder called J2ee in my oracle installion folder so i just tried to map it, but it again throwed error saying "couldnt find asm.jar in j2ee/lib " . So am stuck up at this point.Should i go for oracle 10.1.3 or OC4J as you mentioned? Please give me some insights regarding this.
Regards
Grate

Configure Oracle 10g in Netbeans 6.9

Similar Messages

Maybe you are looking for