Configure oracle rac10g on Red Hat Linux Enterprise 4 and vmware

Can anybody tell how can I configure Oracle 10g RAC using Vmware and Red Hat Enterprise Linux 4. I have two installations of Linux on vmware and I am able to ping inbetween two. A document will do the most.

http://www.scribd.com/doc/320791/Install-Oracle-RAC-10g-on-Oracle-Enterprise-Linux-Using-VMware

Similar Messages

  • Oracle 10g on red hat linux enterprise 4

    Please
    Is REH enterprise 4 is perfect for installing oracle 10g or are there any installation issues. please guide me any one
    Nasir

    Hi everyone
    Even though I'm an Oracle ACE I'm not an ACE in the Linux operating system.
    I am getting a new laptop that has 4 GB RAM and a server that has a quad-core with 4 GB RAM and SCSI drives. Both of these are using the Windows operating system, the laptop using WIndows XP and the server using 2003 Server.
    I have been advised to use VM Ware to install Linux and then install my Oracle database and / or application server.
    Has anyone done this and would you be willing to give me some pointers?
    I also noticed in this thread that someone is not recommending the use of Linux 5 from Oracle but rather use version 4, update 5. Would you be willing to let me have the low down on this?
    If anyone has any white papers or word documents that show how to install Linux 4.5 on VM Ware I would be most grateful. My email address is: [email protected]
    Best wishes
    Michael
    Best wishes
    Michael

  • Red Hat Linux Enterprise 5 64bit and Enterprise Manager 10.2.0.3 Install ?

    Appreciate specific steps to ensure that Oracle Enterprise Manager 10.2.0.3 is installed as baseline for upgrade.
    Red Hat Linux Enterprise 5.2 64bit.
    The major problems are with the Configuration Assistant Web Cache during the Install. It fails with OUI-25031.
    The configToolFailedCommands script contents is:
    oracle.sysman.emcp.agent.AgentPlugIn

    The root cause of Oracle Grid 10.2.0.3 did not install successfully was because of a Network Configuration Issue. i.e., some strange IP was being referenced over the internet and mapping it to my hostname of my server. I performed a "dig hostname" to see what ip was being associated with my so-called unique hostname. After fixing that problem and removing all of Oracle, I only had one warning with OPMN not starting. I discovered additional rpms that needed to be installed and all is good now until the next opportunity.
    Learned Lesson: Pay Very Careful Attention to all configuration components and document as you go to ensure that you have your process documented.

  • Install forms6i and report 6i on Red Hat Linux Enterprise edition 4.0.2

    Dear All
    we want to install forms 6i and reports 6i on Red Hat linux enterprise edition 4.0.2
    if any person have step by step guide pl share with me
    Thanks

    such an old forms version on Red Hat 4 ? Please check first, if this is certified by Oracle
    metalink.oracle.com - Region Certifications
    can't you use the new Oracle Forms 10g ?

  • Installation of OracleAS 10g on Red Hat Linux ES 3.0

    Installation of Oracle AS 10g on RedHat ES 3.0
    Red Hat Enterprise Linux 3
    Copy from OTN Note
    Start
    Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
    1.     Boot the server using the first CD.
    o     You may need to change your BIOS settings to allow booting from the CD.
    2.     The boot screen appears with the boot: prompt at the bottom of the screen.
    o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
    o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
    3.     Language Selection
    o     Accept the default.
    4.     Keyboard Configuration
    o     Accept the default.
    5.     Welcome Screen
    o     Click on Next.
    6.     Mouse Configuration
    o     Accept the default.
    7.     Installation Type
    o     Select Custom.
    8.     Disk Partitioning Setup
    o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
    (WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
    This article uses the following partitioning scheme, with ext3 for each filesystem:
    The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
    - 100MB /boot partition
    -1,500MB swap partition—Set this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
    -7,150MB root partition— This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
    9.     Boot Loader Configuration
    o     Accept the default.
    10.     Network Configuration
    o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
    o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
    o     In the Hostname box, select manually and enter the hostname.
    o     In the Miscellaneous Settings box, enter the remaining network settings.
    11.     Firewall Configuration
    o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
    12.     Additional Language Support
    o     Accept the default.
    13.     Time Zone Selection
    o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
    14.     Set Root Password
    o     Enter a password for root, and enter it again to confirm.
    15.     Package Group Selection
    o     Select only the package sets shown here. Leave all others unselected.
    o     Desktop
    - X Window System
    - Gnome
    - KDE
    - See my comments in the RHES 2.1 section regarding choice of GUI.
    o     Applications
    - Editors
    - Graphical Internet
    o     Servers
    - Do not select anything in this group.
    o     Development
    - Development Tools
    o     System
    - Administration Tools
    o     Red Hat Enterprise Linux
    - Do not select anything in this group.
    o     Miscellaneous
    - Legacy Software Development
    o     Click on Next to proceed.
    16.     About to Install
    o     Click on Next.
    17.     Installing Packages
    o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
    18.     Graphical Interface (X) Configuration
    o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
    19.     Monitor Configuration
    o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
    20.     Customize Graphical Configuration
    o     Accept the defaults.
    21.     Congratulations
    o     Remove the installation media from the system, and click on Next.
    22.     The system automatically reboots and presents a new welcome screen.
    o     Click on Next.
    23.     License Agreement
    o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
    24.     Date and Time
    o     Set the Date and Time.
    o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
    25.     User Account
    o     Create an account for yourself.
    o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
    26.     Red Hat Network
    o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
    27.     Additional CDs
    o     Click on Next.
    28.     Finish Setup
    o     Click on Next.
    29.     A graphical login screen appears.
    30.     Congratulations! Your Linux software is now installed.     
    End of OTN Note
    Now just install compat-db-4.0.14-5.i386.rpm
    Gnome-libs-1.4.1.2.90-34.1.i386.rpm
    Libpng10-1.0.13-8.i386.rpm
    ORBit-0.5.17-10.4.i386.rpm
    Install patch 3006854
    Copy libcwait.so file from /etc to /lib
    And make links
    mv /usr/bin/gcc     /usr/bin/gcc323
    mv /usr/bin/g++     /usr/bin/g++323
    ln –sf /usr/bin/gcc296     /usr/bin/gcc
    ln –sf /usr/bin/g++296     /usr/bin/g++
    Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
    kernel.shmall = 2097152
    kernel.shmmax = 2147483648
    kernel.shmmni = 4096
    kernel.sem = 256 65000 200 256
    fs.file-max = 131072
    net.ipv4.ip_local_port_range = 1024 65000
    kernel.msgmnb=65556
    kernel.msgmni=4096
    Then restart the computer
    Login with Oracle user
    now path setting as
    I have done this by make two environment files
    Infra.env
    TMP=/tmp
    Export TMP
    TMPDIR=$TMP
    Export TMPDIR
    ORACLE_BASE=/oracle
    Export ORACLE_BASE
    ORACLE_HOME=$ORACLE_BASE/appsrv/infra
    Export ORACLE_HOME
    ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
    Export ORACLE_SID
    PATH=/usr/bin:/usr/sbin
    Export PATH
    PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
    Export PATH
    LD_ASSUME_KERNEL=2.4.19
    Export LD_ASSUME_KERNEL
    Copy this file with name as.env and change ORACLE_HOME from infra to as.
    . ./infra.env
    DISPLAY=localhost:0.0; export DISPLAY
    Xhost +
    Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
    Start installation from CD 1 .
    . ./runInstaller
    Press Y               (There is no need to disturb, upgrade, degrade any package)
    Press Y
    Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
    ] –o [  and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
    There will no error in installation in infrastructure
    Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructure’s installation plz rename that 3 files as
    Mv coredb coredb-infra
    Mv dbhome dbhome-infra
    Mv ora     â€¦     ora…-infra
    If u overwrite that files by creating same name of middle tier files no problem.
    When problem comes?
    AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
    Zeeshan Ali
    @CES
    [email protected]

    Hi,
    I tried uname -a and it returns the following:
    Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
    We have the following problems:
    1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
    rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
         oracleasmlib-1.0.0-1.i386.rpm \
         oracleasm-support-1.0.3-1.i386.rpm \
    When I tried to install these files, I got the following error:
    Checking for Red Hat enterprise kernel: [FAILED]
    Also when I try to run /etc/init.d/oracleasm , I get the same error
    Checking for Red Hat enterprise kernel: [FAILED]
    2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
    [root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
    crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
    crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
    crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
    crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
    then tried this:
    SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
    2 failgroup c1 disk '/dev/raw/raw1'
    3 failgroup c2 disk '/dev/raw/raw2';
    create diskgroup dg1 normal redundancy
    ERROR at line 1:
    ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
    [3939617408], [], [], [], [], []
    ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
    ORA-15076: Emulating I/O errors on the OSM disk
    ORA-15076: Emulating I/O errors on the OSM disk
    ORA-15076: Emulating I/O errors on the OSM disk
    ORA-15076: Emulating I/O errors on the OSM disk
    Any help is appreciated.
    Irshad A. Buchh
    Senior Principal Consultant

  • Configuring startWebLogic.sh for Red Hat Linux 7.2

    I was successful in configuring and executing startWeblogic.cmd, but have not been
    so lucky getting the equivalent to run on Red Hat 7.2 using startWebLogic.sh.
    For starters, even before I began editing startWeblogic.sh and just tried running
    I received the following error:
    : command not found
    : command not found
    : command not found
    : command not found
    startWebLogic.sh: line 59: syntax error near unexpected token `elif'
    'tartWebLogic.sh: line 59: `elif [ ! -f $WL_HOME/lib/weblogic.jar ]; then
    I've included both my startWebLogic.cmd and startWebLogic.sh files so that you
    can see what I'm trying to port to the sh file. I'm hoping I'm close to getting
    this to execute and run within Linux so please accept my thanks in advance to
    anyone who might have some suggestions. Interestingly enough I was able to get
    wls to start using ant, but that is obviously only good for my development env.
    The point being I'm hoping I'm close to reaching a solution.
    Below is what my startWebLogic.cmd file looks like:
    @echo off
    @rem This script can be used to start WebLogic Server. This script ensures that
    @rem the server is started using the config.xml file found in this directory and
    @rem that the CLASSPATH is set correctly. This script contains the following variables:
    @rem
    @rem JAVA_HOME - Determines the version of Java used to start
    @rem WebLogic Server. This variable must point to the
    @rem root directory of a JDK installation and will be set
    @rem for you by the WebLogic Server installer. Note that
    @rem this script uses the hotspot VM to run WebLogic Server.
    @rem If you choose to use a JDK other than the one
    @rem included in the disribution, make sure that the JDK
    @rem includes the hotspot VM. See the WebLogic platform support
    @rem page (http://e-docs.bea.com/wls/platforms/index.html)
    @rem for an up-to-date list of supported JVMs on Windows NT.
    @rem
    @rem When setting these variables below, please use short file names (8.3).
    @rem To display short (MS-DOS) filenames, use "dir /x". File names with
    @rem spaces will break this script.
    @rem
    @rem jDriver for Oracle users: This script assumes that native libraries
    @rem required for jDriver for Oracle have been installed in the proper
    @rem location and that your system PATH variable has been set appropriately.
    @rem For additional information, refer to Installing and Setting up WebLogic
    @rem Server (http://e-docs.bea.com/wls/docs61/install/index.html).
    SETLOCAL
    cd ..\..
    title WebLogic Server
    @rem Set user-defined variables.
    set JAVA_HOME=T:\bea\jdk131
    if "%CLOUDSCAPE_HOME%"=="" set CLOUDSCAPE_HOME=T:\Cloudscape_3.6
    if "%LOG_HOME%"=="" set LOG_HOME=T:\jakarta-log4j-1.2
    if "%JIKES_HOME%"=="" set JIKES_HOME=T:
    if "%BAS_ORACLE_HOME%"=="" (set ORAPATH=) else (set ORAPATH=%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\classes12.zip;%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\nls_charset12.zip;)
    @rem Check that script is being run from the appropriate directory
    if not exist lib\weblogic.jar goto wrongplace
    goto checkJDK
    :wrongplace
    echo startWebLogic.cmd must be run from the config\blueagave directory. 1>&2
    goto finish
    :checkJDK
    if exist "%JAVA_HOME%/bin/javac.exe" goto runWebLogic
    echo.
    echo Javac wasn't found in directory %JAVA_HOME%/bin.
    echo Please edit the startWebLogic.cmd script so that the JAVA_HOME
    echo variable points to the root directory of your JDK installation.
    goto finish
    :runWebLogic
    echo on
    set PATH=.\bin;%PATH%
    set CLASSPATH=.;%ORAPATH%.\lib\weblogic.jar;%CLOUDSCAPE_HOME%\lib\cloudscape.jar;%LOG_HOME%\dist\lib\log4j-1.2.jar;.\config\blueagave\serverclasses
    echo off
    echo.
    echo ***************************************************
    echo * To start WebLogic Server, use the password *
    echo * assigned to the system user. The system *
    echo * username and password must also be used to *
    echo * access the WebLogic Server console from a web *
    echo * browser. *
    echo ***************************************************
    @rem Set WLS_PW equal to your system password for no password prompt server startup.
    set WLS_PW=xxxx
    @rem Cloudscape-specific defines
    set CLOUDSCAPE_DEFINES=-Dcloudscape.system.home=./config/blueagave/data -Dcloudscape.storage.pageCacheSize=200
    -Dcloudscape.language.statementCacheSize=200
    @rem Set Production Mode. When set to true, the server starts up in production
    mode. When
    @rem set to false, the server starts up in development mode. The default is false.
    if "%STARTMODE%"=="" set STARTMODE=true
    @rem Add the following -D option to the JVM WL start-up command (after %CLASS_PATH%)
    to change
    @rem the query execute mode. The default is JDBC_ONLY and the other choices are
    EIS_ONLY,
    @rem BOTH_JDBC and BOTH_EIS (the two "BOTH_XXXX options internally execute both
    versions of the
    @rem query but only the results of the _XXXX form are returned to the query submitter).
    @rem -Dcom.blueagavesoft.query.ExecMode=BOTH_JDBC
    echo on
    "%JAVA_HOME%\bin\java" -hotspot -Xms192m -Xmx192m -XX:MaxPermSize=64m -classpath
    "%CLASSPATH%" -Dweblogic.Domain=blueagave -Dweblogic.Name=baserver -Dbea.home=T:\bea
    -Dweblogic.management.password=%WLS_PW% -Dweblogic.ProductionModeEnabled=%STARTMODE%
    %CLOUDSCAPE_DEFINES% -Djava.security.policy==T:\bea\wlserver6.1/lib/weblogic.policy
    %JAVA_DEBUG% weblogic.Server
    goto finish
    :finish
    cd config\blueagave
    ENDLOCAL
    [startWebLogic.sh]

    Thanks Micheal!
    "Michael Young" <[email protected]> wrote in message
    news:[email protected]..
    Hi.
    download here: http://commerce.bea.com/downloads/weblogic_server.jsp
    installation instructions here:
    http://edocs.bea.com/wls/docs61/install/index.html
    Regards,
    Michael
    Help Needed wrote:
    Hi All
    Where can i download weblogic for red hat linux 7.2? Does that come
    with
    instruction on how to install it and if not where can i find the
    instruction!!
    Any will will be appricated.
    Michael Young
    Developer Relations Engineer
    BEA Support

  • How to upgrdae Oracle Cluster on Red Hat Linux 3 to Red hat Linux 4 AS U 7

    We need to upgrade our Clustered (2 Nodes) Oracle Database environment on Linux environment to Red Hat 4 AS 7. The current OS version is Red Hat 3 update 6. We use EMC SAN Storage as shared storage (OCFS and Raw Devices) for our 9i and 10g databases
    Question: We will install (on local disks) Red Hat 4 AS Update 7 and then install ocfs and ASMlib RPMs. Is there any risk of loosing the existing (on Red Hat 3 update 6) ocfs file systems and raw devices (from EMC SAN Storgae) after we do fresh install of OS and ocfs and ASMlib RPMs? How can we keep the shared storage data quickly available (without restore from the backup) to the system after installing Red Hat 4 AS Update 7 and mentioned RPMs?

    Tommy,
    Below are the outputs in he current environmet with Red Hat Linux 3
    # /bin/uname -a
    Linux ghlx070ptlge.penske.com 2.4.21-37.0.1.ELsmp #1 SMP Wed Jan 11 18:44:17 EST 2006 i686 i686 i386 GNU/Linux
    # rpm -qa | /bin/fgrep -i ocfs
    ocfs-support-1.0.10-1
    ocfs-2.4.21-EL-smp-1.0.14-1
    ocfs-tools-debuginfo-1.0.10-1
    ocfs-tools-1.0.10-1
    # rpm -qa | /bin/fgrep -i oracleasm
    oracleasm-2.4.21-37.0.1.ELsmp-1.0.4-1
    oracleasm-support-2.0.1-1
    [root@ghlx070ptlge root]#
    Edited by: user8219029 on Apr 5, 2009 11:36 AM

  • Jinitiator for Red Hat Linux Enterprise Edition 3

    Hello Technocrats,
    I need your reply for our very critical situation asap.
    We have Red Hat Linux EE 3 hosted in all developers PC. Oracle Application 11.5.5 is hosted in a Sun Ultra1 server. Now we have licence for Oracle Developer Suite 10g for RH Linux 3.
    My question is , will Oracle Jinitiator for the OS compatible be installed at time of iDS installation??
    do we need to grab any specific Oracle Jinitiator for E-Business Suite in this regard??
    Is Oracle Jinitiator avbl for Linux platforms. If not wat will be the solution for executing a E-Business module form in a Mozilla web browser in Linux Pc's
    Kindly give all your valuable suggestions asap....... awaitng your reply

    See http://www.oracle.com/technology/products/forms/htdocs/10g/clientsod_forms10g.html for information on officially supported configs.
    The only certification I can see for Redhat is using Sun JPI 1.4.2. The Sun JPI certification was added with the latest patchset (9.0.4.2.0). I know Oracle was planning on certifying Forms 10.1.2 for Sun JPI 1.4.2 and 1.5, but I'm not sure if they managed in the end. Forms 10.1.2 is already available.
    We decided to go for Sun JPI and not JInitiator because we have hundreds of external users. Their sysadmins are much more comfortable installing Sun JPI then they are installing the (unknown) Oracle JInitiator.
    I've written a number of blog articles about our Sun JPI confguration at http://www.oratransplant.nl/category/oracle/forms/

  • Oracle 10g on Red Hat Linux 9

    Hello,
    Contrary to what Oracle advise, we're about to install Oracle 10g on Red Hat 9. I'm afraid that the decision is out of my hands.
    Has anyone installed Oracle 10g database on Red Hat 9? and if so, is the database running smoothly? If not what type of problems have you experienced?
    Thanks in advenace.
    Kind Regards,
    Rudi

    but my installation is failed :
    after i type in ./runInstaller,the following exception is throw:
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
    Failed <<<<
    Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2004-08-26_04-56-29PM/installActions2004-08-26_04-56-29PM.log
    why?thanks for any helps!!!!

  • Can't install Oracle 9i for Red Hat Linux AS3

    I can't install Oracle Database 9i for Red Hat Enterprise Linux.
    Please see messages following:
    [oracle@rhas3 oracle]$ /mnt/cdrom/install/linux/runInstaller
    Initializing Java Virtual Machine from /tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/java. Please wait...
    /tmp/OraInstall2004-01-30_03-31-11PM/jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
    [oracle@rhas3 oracle]$rpm -qa|grep libstdc++|less
    libstdc++-3.2.3-20
    libstdc++-ssa-3.5ssa-0.20030801.41
    libstdc++-devel-3.2.3-20
    libstdc++-ssa-devel-3.5ssa-0.20030801.4
    anybody know how to install for RH AS3, I have tried many time to find out the libraries but still not work and I've plan for RAC also.
    Ched

    Did you carefully go through all pre-req steps for install?
    Oracle needs some "compatibility libraries" as well (compat-lib*). Here are packages for AS 10g, most or all of which apply to Database too.
    Checking operating system packages: gcc-3.2.3-20,compat-gcc-7.3-2.96.122,compat-gcc-c++-7.3-2.96.122,compat-libstdc++-7.3-2.96.122,compat-libstdc++-devel-7.3-2.96.122,setarch-1.3-1,pdksh-5.2.14,sysstat-4.0.7,gnome-libs-1.4.1.2.90-34.1,libstdc++-3.2.3,compat-libstdc++-devel-7.3-2.96.122,compat-glibc-7.x-2.2.4.32.5
    When required packages are in place, there's another error lurking, related to __libc_wait symbol.
    runInstaller "boots" OUI, which includes running a JRE from tmp. This JRE (build 02) is broken, but you can setup to run another one via oraparam.ini and JRE_LOCATION. Download build 10 from Sun (google "jre 1.3.1 download").

  • Has anyone tried to install Oracle 11gR2 on Red Hat Linux 6 64bit?

    The Oracle Universal Installer is checking for some Red Hat packages which are not the ones in Linux 6. Does anyone know how to resolve this issue?

    Hi;
    I'm aware that RHE6 is not certified yet. Someone was able to install it according to this link http://server.billhamilton.com:84/wp/oracle/installing-oracle-11gr2-on-
    rhel6-in-4-long-steps/ but I'm not sure on how he got around the packages requirement.
    I suggest see Tim's site
    http://www.oracle-base.com/articles/11g/OracleDB11gR2InstallationOnOracleLinux6.php
    Regard
    Helios

  • Problem on installing oracle 9i on red hat linux

    anybody having experience on installing oracle on redhat?
    I've tried to install oracle 9i on redhat 8.0. but when I run the
    install command "./runInstaller" under Disk1,
    I got a error msg: "line 58: ./runInstaller: cannot execute binary
    file". (my x windows system works normally.)
    the runInstaller in the error msg is that one under
    /Disk1/install/linux. so what can I do to solve this problem?
    Regards,
    Yabing

    I had the same problem. In my case, it was because of downloading an version of the software. You can check this by running the command:
    readelf -h /cdrom/Disk1/install/linux/runinstaller
    you should see something like
    ELF Header:
      Magic:   7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00
      Class:                             ELF32
      Data:                              2's complement, little endian
      Version:                           1 (current)
      OS/ABI:                            UNIX - System V
      ABI Version:                       0
      Type:                              EXEC (Executable file)
    Machine: Intel 80386
      Version:                           0x1
      Entry point address:               0x8048dd0
      Start of program headers:          52 (bytes into file)
      Start of section headers:          34164 (bytes into file)
      Flags:                             0x0
      Size of this header:               52 (bytes)
      Size of program headers:           32 (bytes)
      Number of program headers:         6
      Size of section headers:           40 (bytes)
      Number of section headers:         30
      Section header string table index: 27If the Machine entry does not match your server, then download the correct version and try again.
    You may also want to check out www.puschitz.com which has some good articles on installing Oracle on Linux. You can also check out the Linux forum here under Tecnologies.
    HTH
    John

  • ASM lib for Oracle 11g on Red hat linux 4

    Hi,
    I am not able to find the ASMlib RPMs for Linux 4.
    Please let me know from where i can get the ASMlib RPMs for Linux 4
    Do let me know if you need any additional information.
    linux 4 kernel version "2.6.9-22.EL i686"
    Thanks,
    Abhay.

    Hi;
    Please see below links:
    http://www.oracle.com/technetwork/topics/linux/asmlib/index-101839.html
    http://www.oracle.com/technetwork/topics/linux/downloads/rhel5-084877.html
    http://oss.oracle.com/projects/oracleasm/
    Regard
    Helios

  • Oracle 10G on Red Hat Linux

    I have an OLD Compaq Workstation with 128MB RAM and 2 disk drives. One has Win98 and nothing else [5.5Gig Free] and the other drive is 4 Gig with Fedora on it [About 2.5 Gig free]. I am in the process of trying to install 10G on it. The install doc talks about a minimum of 512MB RAM and I am only installing Standard Edition. Would I still need that much of RAM in order to install 10G for a Single User???
    Your thoughts are deeply solicited.

    I want to clarify that I installed Oracle10g on RH9.
    I did install it on Fedora.
    This can help you:
    http://www.puschitz.com/InstallingOracle10g.shtml#CheckingKernelParameters
    Joel Pérez

  • Can't connect to EM after rebooting Red Hat 4 Enterprise on VMWare 5.5

    I new with linux, so it took me some time to learn how to install Oracle 10g on Linux OS, after successful installation I rebooted Linux.
    Oracle instance wasn't started automaticaly, I was able to start Oracle and start isqlplus, but I wasn't able to start em.
    Than I'm trying to connect localhost:1158/em I'm geting error: The connection was refused when atempting to contact localhost: 1158.
    I tried run emctl and I got error:
    TZ set to US/Eastern
    EM
    Configuration issue.
    /u01/app/oracle/product/10.1.0/db_1/myhost.com_orcl not found.

    I'll try to do that but after installation everythingwas working and I was able to connect to EM amd isqlplus
    After reboot I started db manually and run isqlctl in order to start isqlplus but emctl doesn't work
    what port to specify 1158 ?
    I got error,, ehere log file:
    Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-config' set to true
    Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'UPDATE_EMAIL' set to true
    Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'dbcontrol' set to true
    Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'db' set to true
    Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'create' set to true
    Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: ORACLE_HOME value: /u01/app/oracle/product/10.1.0/db_1
    Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:24:46 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: EM_HOME value: /u01/app/oracle/product/10.1.0/db_1
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SID value: orcl
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: This is expected, as we might be calling it from a non-rac home
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: Error retrieving the local node for the cluster
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: PRKH-1010 : Unable to communicate with CRS services.
    [OCR Error(Native: prsr_initCLSS:[21])]
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: Cluster Error Message: PRKH-1010 : Unable to communicate with CRS services.
    [OCR Error(Native: prsr_initCLSS:[21])]
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 isDBC: false
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 agentHome: null isCentral: false
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 agentHome: null isCentral: false
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter SYS_PWD.
    Oct 31, 2006 12:24:51 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user:
    Oct 31, 2006 12:24:52 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:24:52 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Oct 31, 2006 12:24:52 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Oct 31, 2006 12:24:56 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: PORT value: 1158
    Oct 31, 2006 12:25:05 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter SYS_PWD.
    Oct 31, 2006 12:25:05 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:05 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:09 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: DBSNMP
    Oct 31, 2006 12:25:09 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:14 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: EMAIL_ADDRESS value:
    Oct 31, 2006 12:25:15 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: MAIL_SERVER_NAME value:
    Oct 31, 2006 12:25:15 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:25:15 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: CONFIRMATION ANSWER value:
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: CONFIRMATION ANSWER value: yes
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter LOG_FILE.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /u01/app/oracle/product/10.1.0/db_1/cfgtoollogs/emca/orcl/emca_2006-10-31_12-24-46-PM.log.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'CHECK_CONFIG' set to true
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: DBSNMP
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: orcl
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBID.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbid
    CONFIG: No dbid available. Will query db to extract it.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBID value: 1132500459
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'db' set to true
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Oct 31, 2006 12:25:20 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: orcl
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: orcl
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter EMAIL_ADDRESS.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.EMDBPreConfig invoke
    CONFIG: Passed repository configuration check
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
    CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: orcl
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties to /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties.emca.tmp
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties has been copied to /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties.emca.tmp
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/app/oracle/product/10.1.0/db_1/sysman/config/emoms.properties to /u01/app/oracle/product/10.1.0/db_1/sysman/config/emoms.properties.emca.tmp
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/app/oracle/product/10.1.0/db_1/sysman/config/emoms.properties has been copied to /u01/app/oracle/product/10.1.0/db_1/sysman/config/emoms.properties.emca.tmp
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/app/oracle/product/10.1.0/db_1/sysman/emd/targets.xml to /u01/app/oracle/product/10.1.0/db_1/sysman/emd/targets.xml.emca.tmp
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/app/oracle/product/10.1.0/db_1/sysman/emd/targets.xml has been copied to /u01/app/oracle/product/10.1.0/db_1/sysman/emd/targets.xml.emca.tmp
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 agentHome: null isCentral: false
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 isDBC: false
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: orcl Host: myhost.com Node: null OH: /u01/app/oracle/product/10.1.0/db_1 isDBC: false
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter PORTS_FILE.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_orcl.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_orcl.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_orcl.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_orcl.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /u01/app/oracle/product/10.1.0/db_1/oui
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /u01/app/oracle/product/10.1.0/db_1/oui
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Homes to scan for used ports: [u01/app/oracle/product/10.1.0/db_1]
    Oct 31, 2006 12:25:21 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/app/oracle/product/10.1.0/db_1
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking JMS port: 5540 from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_localhost.localdomain_orcl
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking RMI port: 5520 from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_localhost.localdomain_orcl
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking HTTP port: 1158 from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_localhost.localdomain_orcl
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking JMS port: null from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking RMI port: null from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking HTTP port: null from /u01/app/oracle/product/10.1.0/db_1/oc4j/j2ee/OC4J_DBConsole
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager getAgentPort
    CONFIG: Cannot parse EMD_URL correctly. No port identified
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: null from /u01/app/oracle/product/10.1.0/db_1/sysman/config/emd.properties
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Cannnot parse EMD_URL correctly. No port identified
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.FileUtil getProperties
    CONFIG: Error reading file /u01/app/oracle/product/10.1.0/db_1/install/staticports.ini
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.PortManager getFreePorts
    CONFIG: /u01/app/oracle/product/10.1.0/db_1:myhost.com:null:orcl:{}:null:{DBCONTROL_HTTP_PORT=5500, RMI_PORT=5521, JMS_PORT=5541, AGENT_PORT=3938}
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_orcl.
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: AGENT_PORT_orcl value: 3938
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_orcl.
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBCONTROL_HTTP_PORT_orcl value: 5500
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_orcl.
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: JMS_PORT_orcl value: 5541
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_orcl.
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: RMI_PORT_orcl value: 5521
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
    CONFIG: Ports assigned for SID: orcl : {DBCONTROL_HTTP_PORT=5500, RMI_PORT=5521, JMS_PORT=5541, AGENT_PORT=3938}
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: /u01/app/oracle/product/10.1.0/db_1, and user: SYS
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig createRepository
    CONFIG: Spooling to /u01/app/oracle/product/10.1.0/db_1/cfgtoollogs/emca/orcl/emca_repos_create_2006-10-31_12-25-22-PM.log
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig createRepository
    INFO: Creating the EM repository (this may take a while) ...
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig createRepository
    CONFIG: ORA-20001: SYSMAN already exists..
    ORA-06512: at line 17
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-20001: SYSMAN already exists..
    ORA-06512: at line 17
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeScript(SQLEngine.java:841)
         at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:265)
         at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:306)
         at oracle.sysman.emcp.EMReposConfig.createRepository(EMReposConfig.java:360)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:182)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
         at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
         at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
         at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
         at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig invoke
    SEVERE: Error creating the repository
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMReposConfig invoke
    INFO: Refer to the log file at /u01/app/oracle/product/10.1.0/db_1/cfgtoollogs/emca/orcl/emca_repos_create_<date>.log for more details.
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Error creating the repository
    Refer to the log file at /u01/app/oracle/product/10.1.0/db_1/cfgtoollogs/emca/orcl/emca_2006-10-31_12-24-46-PM.log for more details.
    Oct 31, 2006 12:25:22 PM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Error creating the repository
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:194)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
         at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
         at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
         at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
         at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)

Maybe you are looking for

  • IE open and close immediately. Can't fix using many methods.

    A user reports that can't use IE 8 suddenly. His PC is Windows 7 Pro sp1 and using Internet Explorer 8. Don't know what he did before and he ever tried restore to previous point but no help. I've tried the following. 1. http://support.microsoft.com/k

  • Doubt on function module

    in function module how to export all the fields in a table .. i.e. i am giving these fields.. in IMPORT P_EBELN LIKE EKKO-EBELN IN EXPORT BUKRS LIKE EKKO-BUKRS and in source code SELSCT SINGLE BUKRS INTO BUKRS WHERE EBELN = EBELN. and i am getting fo

  • Using threads (SwingWorker) to update JTree component

    Hi, Im having a problem trying to update a JTree component (adding child nodes to an existing node) using threads. Im using the SwingWorker3 class (http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html) for threading. When the user select

  • MessageCreationException: ... Unable to create StAX reader or writer

    Hi all, Using weblogic 10.3.5 cluster. While reading domain log I noticed exception that occures many times but not everytime service is called: ####<Oct 5, 2012 4:21:38 PM CEST> <Error> <com.sun.xml.ws.transport.http.HttpAdapter> <o11gwlapcls1.it.pu

  • Security for E61

    hi everyone, i'm just asking what if i want to make security on some folders, for example no one open it without a password or i make it hidden??? is that possible???