Configure ports

Please could I get help in some configurations.
Remote debugging requires that the debugger be allowed to receive information from network. Remote debugging also requires DCOM (TCP port 135) and ISPEC (UDP 4500 / UDP 500) be unblocked.
where do I do these configurations.
Thanks

Hey,
The opening / blocking PORT can be made in the firewall settings of the operating system.
I attached a video you just wonderfully explains and introduces you how to set the PORT.
https://www.youtube.com/watch?v=og6kGDEJ6PU
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Similar Messages

HP Officejet Pro 8600 no possibility to configure Port

My OS is Win 8.1 (last release), last Printer Driver version, last Printer Install Wizard used.
My first Printer "HP Officejet Pro 8600" folling down about Screen issue. I do an exchange with same model, i unsinstall and reinstall the full with wizard, now I have some trouble to recognise the Printer.
- Some time, no comunication
- Some time, the print come after error Printer comunication.
If I go to "Properties/Port/Configure Port" I received "Error Message"
>> An error occured during port configuration.
>> The filename, directory name, or volume label syntax is incorrect.
Could be an old key stay on Registry (with old printer link)
I do unsinstall and reinstall the fuul wizard without success.
Now the Scan function doesn't run and the print run after delay.
Major remarq:
I have no problem with MAC, OS 9.x to 10.10.1
Many thanks in advance for your support
This question was solved.
View Solution.

Ok,
Let's verify the following:
Right click on Computer, then click on Properties and locate the Computer name.
Ensure it is written in English characters and without any special characters.. modify t if required.
From the Control Panel go to Programs and Features, uninstall the HP Officejet 8600 Basic Driver and Software.
Click both the Windows Logo and the R keys of your keyboard to launch the Run dialog.
Type %temp% and click on OK.
Locate and open the HP installation folder, it will start with the 7z characters.
Open the utils folder.
open the x64 folder for a 64-bit operating system or the x86 for a 32 bit OS. if you aren't sure simply try both of the folders, if it is not intended for your OS an error will appear..
Launch the RemovePreinstalledDrivers.exe file and allow it to complete.
Once you are done, go back to the 7z folder and launch Setup.exe to reinstall the HP software.
Reboot your PC once you are done and check again.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Configure port channel between IO Module and FI

Hi,
I have the current setup
UCS chassis (4 uplinks) --> FI --> (Port channel) --> N5K --> (port channel) --> VSS 6500
I configure port channel between IO Module and the FI by changing to policy to "Port Channel" and set the link to 4
FI has created a portchannel under "Internal" containing all the FI interfaces that are connected to the IO module.
I have installed ESXI on a blade but i was unable to reach it, even the esx was unable to ping the gateway.
VLAN tagging is enabled from the ESX server.
I have issued the command "show mac address-table | inc <mac address of the vnic assigned from thre service profile> on both the N5K and thr 6500 and the mac is there.
I have allowed all the vlans on the vNIC from the service profile.
am I missing anything?
thanks

Hello,
Can you please check whether your ESXi vmkernel interface ip address learned on right VLAN on FI / upstream switch or not.
connect nxos
show mac-address-table | inc
Padma

Configuring port mirroring on the MA561x to capture voice packets?

How to configure port mirroring on the MA561x to capture voice packets? Now I use the MA5616. Any help would be appreciated!

How to configure port mirroring on the MA561x to capture voice packets? Now I use the MA5616. Any help would be appreciated!
I use the MA5616,too,and I bought from www.huanetwork.com
, nice price. The configuration of this problem, please visit: http://momopp.blogdetik.com/

How do I configure port forwarding on Airport Extreme via Win 7/64?

Hello all,
I'm trying to forward some ports in order to correct issues with setting up servers for video games, i.e. I can connect but another can't while yet another can connect fine, etc. So far, despite thorough Google searching, I have not been able to find a solution that matches my exact problem.
The specific ports I want to forward are 7777 and 25565. Currently, my connection is through Northstate Communications using an ADSL modem/router (Zhone Model No. 6218-I2-200-0NS) hooked up to an Airport Express + Time Capsule (Model No. A1254, version 7.5.2). As far as I know, the only reason the Airport Extreme is there is for the time capsule, but I don't know for sure whether my computer is actually connecting to the internet through one or through the other. I didn't set it up originally, unfortunately.
I currently can't edit the settings for the Zhone. Supposedly, typing 192.0.0.1 into the address bar of my web browser should open the router configuration utility, but instead it returns "Oops! Google Chrome could not find <address>." I can, however, use the AirPort Utility for Windows to edit all of the AirPort's settings. I have followed the instructions in this YouTube video to forward the port 7777 using the AirPort Utility: http://www.youtube.com/watch?v=OFad6NvddRk but changes I make to Advanced/Port Mapping apparently do not work because www.whatsmyip.org and www.canyouseeme.org report that a test of port 7777 is either timing out or unavailable, respectively.
I am concerned that the IP address automatically provided for me when I create a new port mapping is not the correct IP address since it is 10.x.x.x, which I can't find anywhere in any settings on the computer or online. But, when I type in the IP address I get from www.whatsmyip.org (97.x.x.x) and then go back to edit the setting I created, it has apparently reverted to 10.x.x.x without saving the address I entered.
So, what am I doing wrong? Do I need to change some settings in the Zhone router before it will work, and if so, how can I access it? What is the 10.x.x.x address that the AirPort Utility assigns to new port mappings by default? Since I intend to use Hamachi to host the game server, do I need to use the IP address given to me by that program (5.x.x.x) instead? As far as I can determine, all my drivers are up to date. Any assistance would be much appreciated. Other system specs given below:
CPU: AMD Phenom II X4 945 3.00 GHz
MB: MSI 790FX-GD70 AM3 AMD
RAM: Corsair Dominator 4GB (2 x 2GB) 240-Pin DDR3 SDRAM 1600 (PC3 12800)
Mushkin Enhanced Blackline 4GB (2 x 2GB) 240-Pin DDR3 SDRAM 1333 (PC3 10666)
GPU: Sapphire 100258-1GHDMI Radeon HD 4850 1GB 256-bit GDDR3 PCI Express 2.0 x16
Wireless: AZiO AWD102N PCI Wireless Adapter
OS: Windows 7 64-bit
-R

Thanks for your response. I attempted to do that, but I couldn't find any way to access the configuration for the Zhone router. Typing the IP address into my web browser's address bar only resulted in "page could not be found" or "page timed out", etc. I called tech support at Northstate, who likewise suggested that the Zhone router should be set to bridge mode and the AEBS set to router mode since it would be easier for me to configure the AirPort. After wrangling a bit with them over my inability to change any settings for the Zhone, they sent a technician over. He messed around with the Zhone, apparently putting it in bridge mode, and we managed to get the AirPort to work without any double NAT errors. I reset the AirPort and created a new configuration file. Unfortunately, when I went to the Advanced/Port Mapping menu and repeated the original steps to forward port 7777, tests at www.whatsmyip.org still returned "timed out". The technician said he wasn't knowledgable enough about Apple products to assist me any further and suggested I call their tech support or visit the nearest Genius Bar. So that's about it. Any other ideas?

BI Integration in Portal (Where to configure Port, problems with km-integr)

Hello,
I am new to BI and started to integrate BI into the portal or rather tried it.
When I open my Bex-Excel-Workbook and try to create a document (right mouse -> jump -> documents) an error occurs that the service is not reachable. This is because of an wrong port.
Could someone tell me where I can change the port that he is using when the portal is called out of excel?
Changing the port in the browser I am facing some other problems like (sorry I don't know how to translate it exactly):
Properties for the assignment couldn't be provided
Could not determinate repository for documents with this property typ
Error during open new document-dialog
Has someone an idea how to investigate this problem? could it be because of the wrong port and where to configure the port?
Thanks a lot,
Vanessa

Hi,
Please refer the below links for BI Integration in Portal
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
http://www.sdn.sap.com/irj/sdn/nw-datamanagement?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
Hope it helps you,
Thanks & Regards,
Ravi.

Configuration Port in Inbound IDoc?

Hi~
There is a scenario "File to IDoc".
The flow of the scenario is legacy file system -> XI -> R/3.
Then,
Is it correct to configure only in XI using IDX1 & IDX2?
If it isn't correct, then should I configure in R/3 using WE20 & WE21, too?

Hi,
>In R/3
1. RFC Destination pointing to XI. (SM59)
2. Create Port using RFC Destination in WE21.
3. Partner Profile in WE20.
perfect on R3. The only difference will be that the Partner Profile now will have an Outbound Idoc as R3 is sending the Idoc. In the case of Idoc to file, the partner profile will have an inbound entry in it.
SLD 0f XI
1. Create tech System for the r3 system -> this will be a webasABAP
2. Create business system for the CLient of the r3 system --> webasABAP and make sure that tyhe logical system name is correct.
Use this business system as the sender system.
Partner Profiles are always done on the SAP R3 system.
Regards
Bhavesh

Configuring ports not working after installation of HP 6000.

I had written last night about problems getting my HP 6000 Wireless E609n printer to work on my home network. There are three computers hard wired into a medialink router, with the printer attached to one that is running Windows 7. One of the other two computers runs Windows 7, the other XP. The three computers can see each other on the network. I downloaded the software for the XP and installed it, and the installation went okay, but the printer still will not print. It seems as if the problem is with the router or the settings on the printer. The printer works on the main machine, the one it is attached to. I printed the Printer Status Report, and under connectivity settings, the network status is offline with no active connection type. Its URL is 0.0.0.0. I was attempting to try and enter an IP address on the XP machine so that it could see the printer. So on the main machine, I tried to configure the ports to get the IP address. I got this error message 'An error occurred during port configuration. This operation is not supported.' I had this problem earlier too, so I uninstalled the printer and then reinstalled it, but the problem remains. I cannot obtain an IP address. Are there settings for the printer or the router that need to be changed, or is it something else? Any information would be appreciated.

It sounds like you have the printer connected a Windows 7 computer with a USB cable and are sharing this over the network. With this type of setup, you would not use an IP address since it would not have one. The printer would only have an IP address if it is connected to the router (ethernet or wirelessly).
Based on the description of the setup, there really shouldn't be a need to have it connected directly to a Windows 7 system. If you prefer to have it connected to a Windows 7 system directly and to share it with the other computers, this document from Microsoft discusses how to share it and this document from Microsoft covers adding a network shared printer in Windows XP.
Honestly, I recommend using the printer connected to the router for the simplest and most problem free setup.
HP's site does show the Officejet 6000 e609n supports wireless and wired network connections. The easiest option would be to connect the printer to the router with an Ethernet cable (wireless can be problematic in some setups).
This document from HP covers how to install this printer on a wired network for Windows 7.
This document from HP covers how to install this printer on a wired network for Windows XP.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Steps to Configure Port and Partner Profile for Outbound process

Hi,
I want to Configure the partner profile and Port definition for outbound Message type REMADV ( for Vendor).
Could anyone please tell me the steps to configure.
Thank you,
Renu

Hi Renu,
In partner profile we define the system which are going to communicate between themself and send data, here we give some logical name for the system which are going to be partners in data communication.we set it using WE20
Port is a medium through which we send the data it connect one system with the system in other end its unique, depend on the scenario we use diff ports like file port(EDI) transactoional port(ALE) internet port(for internet apl), like this i dont remember all the name, so according to our application type we select the ports we set port using WE21 usally tport name start with A*** something like this. withour defining a port we cant communicate with other system its the linker b/w the 2 system.
For more information please refer the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/beb13b00ae793be10000000a11402f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
Regards,
Moqeeth

Configuring port for J2EE

Hi all,
Could any one help me in configuring j2ee port for PI 7.0 as i am not able to connect to sxmb_ifr and to when i run the transaction scsmi i find no port number for http port .
Thanx in Advance

Hi,
Please check if you have maintained the SLD Connection Parameters , if not please do as follows:
Maintaining SLD Connection Parameters
1. Log on to the SAP System and call transaction
SLDAPICUST.
The screen Maintain SLD Access Data is displayed.
2. Choose Display<-> Change, and then proceed as follows:
a. Choose Insert Row.
b. Enter the connection parameters to the SLD:
− Host Name: host name of the SLD host
− Port: HTTP port of the J2EE engine (The following naming convention applies: 5<J2EE_instance_number>00. 50000, for example, if your J2EE instance is 00).
− User
− Password.
c. Set your entry as Primary.Only the Primary marked entry is active.
d. Save.
*Pls: Reward points if helpful*
Regards,
Jyoti

How to configure port to connect switch SG300 to 3com switch

Hello,
I need help. I have my network with severals SG300 switches.
I have one of them like my core switch working in layer 3 mode. With 2 vlans and vlan interfaces to each vlan.
Everything is working ok.
But now i have to connect one 3com unmanage switch that have host from vlan 1 and 2. How should i connect this switch to my Cisco sg300 switch? What mode should i use in that port?
thanks a lot.
SG300 L3 Switch
 I
 I
SG300 L2 switch
 I
 I<-------- How should i configure this connection to support all vlans.
 I
3com unmanage switch
 I I
 I I
 I vlan 1
 vlan2

Use MAC-based VLANs on SG300 L2 switch, register all clients in needed VLANs (or better setup SG300 L2 port to 3com in PVID VLAN with maximum clients and others in MAC-based VLANs).

Configure ports for SSAS on sql 2012

I Have 3 SSAS instances on a machine
1) Multi - Dimensional (Default instance)
2) tabular (Namedinstance)
3) powerpivot (Namedinstance)
can anyone please help me what ports need to be opened for each instance , how to configure those ports on sql 2012

That depends on the ports used by the SSAS instances; see
Configure the Windows Firewall to Allow Analysis Services Access
Olaf Helper
[ Blog] [ Xing] [ MVP]

Configuring port-object in ASA

Hi Everyone,
I need to config port-object eq 17800 etc in ASA.
I tried command object-group   service xyz
but there is no option for port-object eq ?
Regards
Mahesh

Hi,
I think you have probably configured the "object-group service " without defining the protocol used
For example
ASA(config)# object-group service TEST
ASA(config-service-object-group)# ?
description          Specify description text
group-object        Configure an object group as an object
help                    Help for service object-group configuration commands
no                       Remove an object or description from object-group
service-object       Configure a service object
ASA(config-service-object-group)#
However if we specify the "object-group service " with either "tcp" or "udp" or "tcp-udp" at the end then you will have the option of "port-object" command
ASA(config)# object-group service TEST tcp-udp
ASA(config-service-object-group)# ?
description    Specify description text
group-object Configure an object group as an object
help              Help for service object-group configuration commands
no                 Remove an object or description from object-group
port-object     Configure a port object
ASA(config-service-object-group)#
Though even if you used the original "object-group service " configuration you could still define it as an "object-group" which for example contains the allowed destination ports in some ACL.
For example the following would group TCP/17800 and UDP/17800 in one "object-group" and use them in an ACL
object-group service TEST
service-object tcp destination eq 17800
service-object udp destination eq 17800
access-list TEST extended permit object-group TEST any any
When we look how the actual ACL looks like we see the following
ASA(config)# show access-list TEST
access-list TEST; 2 elements; name hash: 0xd37fdb2b
access-list TEST line 1 extended permit object-group TEST any any (hitcnt=0) 0x0abc0954
access-list TEST line 1 extended permit tcp any any eq 17800 (hitcnt=0) 0x25ac5419
access-list TEST line 1 extended permit udp any any eq 17800 (hitcnt=0) 0xc6e32e33
Hope this helps
- Jouni

Configuring port-channel on N7K

Hi there,
I am trying to build a port-channel from N7K-01 to N7K-02 using a breakout cables (40G interface from N7K-01 to 4x10G interfaces on N7K-02). it didn't work
is this require a special configuration??? because I have done port-channel configuration between two 40G interfaces and it works.
appreciate your valuable support if possible to share the needed configuration to accomplish this.
thanks,
regards,
Haitham.

Hi,
when I do it directly between cisco ASR9k, the 10g interfaces are up with lights but 40G side is red not up.
between cisco N7Ks, no lights from both sides. between N7Ks cable is going to patch-panel and then to other nexus.
thanks,

Help configuring ports 3283 5900 on client and administrator for ARD

Hello:
I think I'm understanding the concept of configuring these ports to be opened so that I may use ARD over the internet. I'm sure any Apple Techhead would know where to find these and how to change them, but unfortunately I'm not one of those techheads. . . can anyone suggest where I find them and how to open those ports up?
G5 Mac OS X (10.4.2)

It depends where you want to open them. If you have the Mac firewall turned on go to the Sharing Prefs and enable ARD in the Firewall settings. If you are behind a router, you may need to alter the NAT settings to allow access.If you have Netbarrier installed you may need to create a custom set allowing ARD across the internet (both UDP and TCP protocols).

Configure ports

Similar Messages

Maybe you are looking for