Configure printer resolution in Brother DCP-7055

Hi all.
I'm setting up a multifunction Brother DCP-7055 printer Archlinux, using the official driver, which is installed and running, but when configure print only lets me choose between 600 dpi and HQ1200dpi, when using it under Windows 7 used 300dpi. I wanted to know if there is any way to configure it to accept this resolution.
Regards.
Last edited by arch_forum82z (2015-01-05 17:23:21)

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.

Similar Messages

Cannot print with my Brother DCP-7055 (copies and scans are working)

Since I updated my system I am not able to print something with my Mac on the Brother DCP-7055.
When I want to print something it shows on the printer that it is submitting the data but nothing happen. From this moment the printer is like "blocked" and all the new task are in the waiting list.
I tried everything, delete the printer and reinstall it, reinstall the driver and everything.
It is not a problem of the printer I think, because I can do copies and as well I can do a scan (connected with my Mac as well).
I need help!
Thanks in advance.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.

TS3276 I've been using Mac OS X 10.6.4. I want to install printer driver of Brother DCP -7030 .I tried it online I could not do it. Would you help me providing suggestions.

I've been using Mac OS X 10.6.4. I want to install printer driver of Brother DCP -7030 .I tried it online I could not do it. Would you help me providing suggestions. It would be great help.
Dinesh from Nepal

Mac OS X 10.6.8 is the current incarnation of Snow Leopard, and fixes various issues in earlier releases.
Current versions of Mac OS X 10.6 include the necessary printer driver for the Brother DCP-7030 printer (HT3669). (The asterisk footnote on that printer indicates there was a recent update via Software Update, so get to current 10.6.8 and ensure the Brother printer software update has been selected and loaded.)
If you're on the current Mac OS X version and if have the Brother update loaded (from Apple) and if problems with the printer persist, then remove the printer from your current Mac OS X configuraton, and re-add it, and see if that clears the particular issue(s) you're having with this printer.
From experience, the Brother software for Mac OS X is a little odd, and the older software stuff (and particularly around the scanner controls for their multi-function series) were, um, unusual, and a little unstable. Printing generally worked fine, though. Recent versions of the Brother software are working better including for the scaller, but the UIs and the set-up are both still odd. If you're using the box as a printer (I haven't looked at the DCP-7030 features), then you're best using the Brother software that arrives from Apple and not the software from Brother.
Also ensure the printer firmware is current. That's corrected some odd behavior on some Brother printers.

[SOLVED]Can't print to my Brother DCP-7065dn after upgrade to systemd.

Hi All,
I have a pure systemd installation and I'm having issues printing. I have a Brother DCP-7065dn which works well on my Ubuntu laptop with the drivers availible from Brother. I downloaded and installed the drivers for this printer from the AUR and added the printer to cups (both lpd and usb). When I print a test page cups reports that the job completed succesfully but the printer does not print. Not sure what is wrong. Has anyone else had printing issues after upgrading to systemd? Any thought on how I can get this printer working?
Thanks
Edit: BTW. Brother offers deb and rpm packages for their Linux drivers. I installed the deb packages on an Ubuntu machine and I can print over the network (lpd) with no problems. I also installed the brother on may arch system using the wrong drivers just to see what would happen. Using the DCP-7045N Foomatic/Postscript driver I can communicate with the printer (progress) but printing a test page results in the printer spitting out a lot of blank pages. I can also print to an HP from my arch laptop with no problems. So the issue seems to be with the drivers for the Brother DCP-7065dn from the AUR. Not sure how I'm going to fix this. I can't install the rpm or deb packages on my machine. and I don't want to switch to a red-hat or debian system if I can avoid it.
Final Edit: SOLVED! I need to learn to go back and read comments. In the AUR there was a comment regurding this exact issue. I needed to enable multilib repository and install lib32-glibc. Now it works. \(^_^)/
Last edited by darthpenguin (2012-10-04 08:41:29)

Matthew Poor wrote:
The iMac spooled its print job, then replied "communication error". I repaired permissions, restarted everything, and same result.
Did you add the printer using Bonjour or did you select one of the IP protocols? If the latter, then you cannot use IPP. The Canon MF driver supports LPD or HP Jetdirect.
Matthew Poor wrote:
Updated to Canon driver 10.2.0, printer is still not appearing in the list.
If you mean that after you change the USE menu to "Select printer software" and the Printer Software window is empty, then try restarting your Mac. This can rebuild the printer list.
Matthew Poor wrote:
Both Canon MF background items are running according to Activity Monitor.
The new MF v10.x driver does not install or use the MF Background process. So this process is a leftover from a previous driver. I would therefore recommend you trash the older driver files and run the v10.2.0 driver installer again.
Depending on the version of driver you had installed prior to upgrading to Mavericks, the name of the folder can be different but will reside in /Library/Printers/Canon. Here you will see BJPrinter and IJScanner. Leave them alone and just remove the one or two that have MF in the name.
You then need to navigate to /Library/Launch Agents/ and trash any Canon plist file. Then restart the Mac and run the Canon MF v10.2 installer again and then see if you can add the MF8350.

How do I enable printing from my ipad 2, it doesn't see my wireless Brother DCP J315W printer. can anybody help?

I need to print from my Brother DCP J315W wireless printer. I don't really understand this Air Print concept and have not heard of it before, is it only on certain printers? This printer is new and I would like to be able to link it up with my IPAD 2
Any help would be greatly appreciated.
Ray

AirPrint is only possible on some HP printers at the moment (the models are listed on this page http://support.apple.com/kb/HT4356). There are apps that allow you to print to other printers (I havn't got any of them but I've seen apps such as Print n Share and Print Central mentioned), which can print via your pc/mac

HT4356 how to configure airprinter for printer brother dcp-j315w

i want to configure airprinter for Printer Brother DCP-J315W. how to do it??

You can't, that is not an Airprint compatible model. See if Brother has an app you can use to print.

Need help to get my Brother DCP-J125 printer working again

I'm totally stuck here. I had this printer working and now after a few months it doesn't work anymore.
I tried it with/without usblp. Tried it by installing the drivers myself and by installing the drivers with brother-dcpj125 from AUR (and I did run the script that comes with the drivers). Readded printer several times, reinstalled cups several times. The printer doesn't print. I think cups doesn't find the printer... (The scanner works btw)
$ lsmod | grep usb
usb_storage 44760 0
usbhid 36812 1 hid_logitech
hid 85608 3 hid_generic,hid_logitech,usbhid
btusb 11892 0
bluetooth 193532 10 bnep,ath3k,btusb
scsi_mod 133152 6 uas,rts5139,usb_storage,libata,sd_mod,sr_mod
usbcore 147434 9 uas,ath3k,btusb,uvcvideo,rts5139,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
/var/log/messages.log
Connecting the printer:
Sep 23 16:55:34 localhost kernel: [ 2855.013082] usb 2-1: new full-speed USB device number 3 using xhci_hcd
Sep 23 16:55:34 localhost kernel: [ 2855.029232] usb 2-1: ep 0x85 - rounding interval to 512 microframes, ep desc says 800 microframes
Sep 23 16:55:34 localhost kernel: [ 2855.029994] scsi8 : usb-storage 2-1:1.2
Sep 23 16:55:34 localhost mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-1"
Sep 23 16:55:35 localhost mtp-probe: bus: 2, device: 3 was not an MTP device
Sep 23 16:55:42 localhost dbus[644]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Sep 23 16:55:45 localhost kernel: [ 2866.038840] scsi 8:0:0:0: Direct-Access Brother DCP-J125 1.00 PQ: 0 ANSI: 2
Sep 23 16:55:45 localhost kernel: [ 2866.099179] sd 8:0:0:0: [sdd] Attached SCSI removable disk
Sep 23 16:56:12 localhost dbus[644]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Disconnecting the printer:
Sep 23 16:57:37 localhost kernel: [ 2977.838261] usb 2-1: USB disconnect, device number 3
$ lsusb
Bus 002 Device 004: ID 04f9:0253 Brother Industries, Ltd
$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 23. Sep 16:59 /dev/bus/usb/002/004
# lpinfo -v
network ipp
network beh
network smb
network http
network socket
network https
network lpd
network ipps
file cups-pdf:/
direct hp
direct hpfax
$ /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=13
DEBUG: Switching USB device configuration: 0 -> 1
DEBUG2: Printer found with device ID: Device URI: usb://Unknown/Printer
direct usb://Unknown/Printer "Unknown" "Unknown" "" ""
Any idea what's wrong? The printer worked perfectly a few months ago

nTia89 wrote:start posting the pacman's log....
This is everything I installed or upgraded since March. Do you need the whole log?
https://raw.github.com/gist/3d718d6781d … tfile1.txt
David Batson wrote:
You probably need to change the URI in CUPS. See the following for some tips.
http://welcome.solutions.brother.com/bs … prn1a.html
http://welcome.solutions.brother.com/bs … _prn3.html
I can select the driver for my printer when I modify the printer, but the "Connection" stays "usb:/dev/usb/lp0".
Last edited by slosd (2012-09-23 22:56:49)

[solved] printer - brother DCP-J315W - "sending data to printer"

Hi All,
My sister have a printer brother DCP-J315W, connected with usb.
I installed the brother-dcpj315w package from AUR, and it used to work without issue.
But I was informed "recently" that this printer is not working correctly since perhaps two months. (perhaps it's related to the AUR package update, but I think it's was already not working before the update.)
When I try to print, there is no activity on the printer, and, using the cups web-interface, I can see, for the printer status: "idle - sending data to printer"
I'm not sure about what I see in the logs, there are some failure about systemd and avahi service, when I try to print, perhaps it's the issue, but I really don't know.
journaltct -f - when I try to print a test page.
/var/logs/cups/error.log - for this day, with a debug log level, and when I added this printer and print a test page.
It tried to not use the usblp kernel module without success, the printer is not recognized by cups without this module loaded.
So, I'm quite lost with this issue.
Cupsd info:
/etc/cups/cupsd.conf
Printer info
Bus 003 Device 002: ID 04f9:0254 Brother Industries, Ltd
lsmod | grep 'usb'
usblp 13011 0
usbhid 41358 0
hid 86421 2 hid_generic,usbhid
usb_storage 43828 0
scsi_mod 130423 4 usb_storage,libata,sd_mod,sr_mod
usbcore 174164 5 usblp,uhci_hcd,usb_storage,ehci_hcd,usbhid
usb_common 955 1 usbcore
If you have any idea to help me debug this issue, I'd be grateful.
Thanks a lot to read this.
Last edited by gyan000 (2013-03-16 13:29:13)

Hi again,
Issue solved, I had to execute this commande after the package installation:
/opt/brother/Printers/dcpj315w/cupswrapper/cupswrapperdcpj315w
I contacted the package owner so he can update his package.
Thanks
Last edited by gyan000 (2013-03-16 13:29:42)

Brother DCP 130C Printer not connecting tO mac OSX 10.6.8

Following the upgrade to Mac OS X Snow Leopard my Brother DCP 130 C Printer not working have tried downloading upgrade without success

I have to raise a different view point. Many users of macs are ordinary, non-techie people, who simply want a machine to do basic things. I know people with very old macs, and they are happily using them for simple purposes. I have 10.6.8, and any upgrade would cost me some money to upgrade parallels. Macs can run for years, and I believe that it is important for equipment to be able to be used for long periods of time, if the user wishes. Also, earlier OS are very commonly unsed in coutries where money and internet is not as available as to many of us.
I also use a mac with XP as I need a small install base for only one PC based software that I occasionally use.
As a developer, I would expect them to look at the actual installed back of OS, and realise that some simple functionality should be backward to existing users. The ability for a phone to connect to earlier OS is something which I did not even think about - I thought it would be automatic. Its also not that difficult to develop.
The forums are awash with frustrated new pruchasers of Lumia phones, suddenly realising that their expected functionality with PC Suite, etc has now gone. Many of those people are very frustrated, and they will pass on their frustrations to others, and sales will be affected.
I have been a Nokia user now for about six years, and I have watched the same frustrations of users, requesting Nolia to develop expected connection, integration, and sync software that other phone manufacturers seem to be able to do. Finally, a reasonable PC Suite version is now developed, but not compatible with Lumia?? Do we have to go through the whole waiting thing again? Why cannot Nokia look at this not as a software problem, but an expected functionality feature.

Trying to print from Macbook 10.4.11 using Brother DCP-J125 printer from usb getting messagge on screen The process " Ratsterobrother 145 " terminated unexpectedly on signal 5. Why cant I print from computer?

Trying to print from Macbook OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
Any help or advice would be appreciated.

Trying to print from Macbook OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
Any help or advice would be appreciated.

Brother DCP-120C does not print

I am having issues with my Brother DCP-120C. It worked well a while, but now i encounter some problems.
When starting the cups daemon i get this error message in my error.log:
E [13/Jan/2010:19:11:25 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I installed the brother-mfc210c-fixed-version package beforehand.
Any ideas?
Last edited by Alp (2010-01-14 08:10:49)

Additional information:
The cups daemon starts anyway, even with the error message. In the cups web frontend i see my installed printer (MFC210). If i print a testpage or something else, a print job is created but never executed. Cups seems to wait endlessly until something happens.

Brother dcp 9040 cn not printing over airport wifi

i am unsure if this is a 10.6.3 upgrade issue
i have a brother dcp 9040 cn which i have been using for the past year very happily over the wifi airport network.
it has stopped printing over the wifi
it works fine with the usb connection
it appears fine with bonjour & selects ok except when i print over the wifi it tries to connect but never does and then always pauses.
i have upgraded the firmware on the printer from the brother site and have loaded the latest drivers from brother for osx
has anyone got any suggestions?
thanks

10.6.3 came with the latest drivers for your printer.
Try resetting the printing system.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
Don't install any print software.
See if your Mac sees that printer.
If so, select it and see if you can print.

Problem with Brother DCP-J315W configuration

I just bought new printer, Brother DCP-J315W, but it seems, that there is no arch/aur package with drivers to this machine. I downloaded deb packages from brother's site, and converted them to tar.gz, then copied the files from this archives to my directory tree. CUPS finds my printer with web interface but all the jobs print "Unable to locate printer 'BRW0022585243C3" error.

IIRC you need to run a couple of those Brother scripts as root before CUPS will register the driver correctly. I think the scripts in the cupswrapper and lpd directories need to be be run first. Then resetup CUPS as usual.

I can not install a printer brother dcp-375CW after installing mavericks, what can I do

I can not install a printer brother dcp-375CW after installing mavericks, what can I do

Have you tried to get the latest drivers?
http://welcome.solutions.brother.com/bsc/public_s/id/os/macintosh.html
Also, I would suggest posting in the Mavericks discussion page. This page is for the music app MainStage.
Hope this helps!

Sane doesn't recognize Brother DCP-115C

Hi, I am trying to use my scanner, a Brother DCP-115C, with arch. I installed "brscan2-network" from AUR, ran the "/usr/local/Brother/sane/setupSaneScan1 -i" command (as the wiki page suggests) which successfully added the line "brother2" to "/etc/sane.d/dll.conf". "/usr/lib/libsane-brother2.so" is present.
I tried plugging the scanner in repeatedly, but "scanimage -L" always says
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Some output:
lsusb:
Bus 003 Device 002: ID 04f9:018c Brother Industries, Ltd DCP-115C
log:
Oct 20 13:43:30 wombat kernel: usb 3-2: new full-speed USB device number 3 using uhci_hcd
Oct 20 13:43:30 wombat kernel: usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 3 i...018C
Oct 20 13:43:30 wombat kernel: usb-storage 3-2:1.2: USB Mass Storage device detected
Oct 20 13:43:30 wombat kernel: scsi5 : usb-storage 3-2:1.2
Oct 20 13:43:30 wombat colord[229]: Device added: sysfs-04f9-018c
Oct 20 13:43:30 wombat systemd[348]: Starting Printer.
Oct 20 13:43:30 wombat systemd[348]: Reached target Printer.
Oct 20 13:43:30 wombat systemd[1]: Starting Printer.
Oct 20 13:43:30 wombat systemd[1]: Reached target Printer.
Oct 20 13:43:31 wombat kernel: scsi 5:0:0:0: Direct-Access Brother DCP-115C 1.00 PQ: 0 ANSI: 2
Oct 20 13:43:31 wombat kernel: sd 5:0:0:0: [sdb] Attached SCSI removable disk
What can I do to make the scanner work?
/e: One more output:
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x0b95, product=0x1790) at libusb:005:002
found USB scanner (vendor=0x04f9, product=0x018c) at libusb:003:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Last edited by janoliver (2013-10-20 11:57:44)

Hi Zydo58,
I apologize, I'm a bit unclear on the exact network configuration you are currently using with your iMac and your two printers. For more general printer troubleshooting, you may find the steps outlined in the following article helpful:
OS X Mavericks: Solve printing problems
Regards,
- Brenden

Configure printer resolution in Brother DCP-7055

Similar Messages

Maybe you are looking for