Configure pull DP concurrent distribution settings

Like the name says, SCCM noob here, so please bare with me.
My question is, is there a way to configure pull DP concurrent distribution settings? I know there's a way to do this at the site level, but is it possible to do this for individual Pull DPs? I thought this could be done with a custom client device setting
but that only gives me the ability to throttle traffic
Any help would be greatly appreciated :)
Thanks in advance!

Yep you nailed it.
I haven't been able to find anything in terms of documentation for what we're trying to accomplish, it's good to know that it's not my inability to Google properly!
Ideally, we'd like to deploy 1 package at a time, but that's rarely the case.  The packages are pretty big typically, and the remote locations can't afford the complete bandwidth consumption.
We're toying with the idea of placing true DPs at slower remote sites so we can have total control of the concurrent distribution settings. However, I'll look into a regedit solution.
Again, I really appreciate the help Jason!

Similar Messages

  • How to configure standard report concurrent program in web forms.

    I have developed new custom report using reports6i, and defined a concurrent program registered into AOL and assigned to a request group. I tested the report runs fine from form based applications. But user wants to run this new report from web forms(Incentive Compensation). I have no idea how to create a concurrent program link in the Incentive compensation module web forms.
    Is there any document to configure oracle report concurrent program into web forms?
    or guyz please send me the steps (screen shots) to add custom report concurrent program to web forms?
    Please help guyz...I'm new to web forms......
    Thanks in advance
    Naveen
    [email protected]

    Naveen,
    On some event on the page (like a button submit) you can call a PLSQL API with parameters which can further submit your concurrent Request.
    If you want to see the Report output in Apps, it can be done directly. Otherwise if you want to see the value in the Self Service Page itself, then you can extend the oracle.apps.fnd.cp.request.server.RequestSummaryVO for your case.
    Thanks
    Sumit

  • Please let me know the TCODE for configuring Unit of Measure with settings

    Dear All,
    Please let me know the TCODE for configuring Unit of Measure with settings.
    Thanks

    Dear All,
    Please let me know that can we get PO amount with Taxes included in report ME80FN.
    Is there ant other standard report to get the same?
    Please help.
    Thanks.
    Shreya

  • Query for package distribution settings

    Is there a query to see what the "Package distribution Settings" are set to?  For example how could I find out which packages are set to "Download
    only content changes to the distribution point" or "Manually copy the content in this package to the distribution point"
    without manually checking each individual package?

    Hi,
    The PkgFlags stored in decimal format. You need to convert to hexadecimal format, then the last two digits of PkgFlags will show as below:
    Automatically download content when packages are assigned to distribution points: 0x......00
    Download only content changes to the distribution point: 0x......10
    Manually copy the content in this package to the distribution point: 0x......20
    When we check "Distribute the content for this package to prefered distribution points", the first digit of PkgFlags will be 0x4.......
    Hope the data above (I observed from database) could help you.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • RE:manual configuration of the customer distribution model

    i hae entered tcode bd64 for manual configuration of the customer distribution model  but now i dont know where to go to to put the sende and receiver addresses. i am stuck guys, please helb

    Please refer this blog.
    /people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
    http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html
    Regards,
    Ramki.

  • Configuration manager 2012 Client Deployment settings.

    GPO to push config mgr client
    i have added The Configuration Manager templates in GPO
    Under Configure Configuration manager 2012 Client Deployment settings.
    I have enabled it and what is the command line here
    CCMSetup.exe SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
    or
    SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
    or
    CCMSetup.exe /MP:sccm.mydomain.com  /logon SMSSITECODE=COD  SMSSLP=sccm.mydomain.com FSP=sccm.mydomain.com
    or
    /MP:sccm.mydomain.com  /logon SMSSITECODE=COD  SMSSLP=sccm.mydomain.com FSP=sccm.mydomain.com

    You can use the following:
    CCMSetup.exe
    SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
    http://prajwaldesai.com/deploying-configuration-manager-2012-r2-clients-using-group-policy/
    http://methmal132.wordpress.com/2013/02/13/how-to-push-the-sccm-agent-via-gpo/
    Regards, Ibrahim Hamdy

  • How can I get the apple configurator to retain a devices settings and apps?

    Hi there all!
    I have an iPhone that already has apps and email settings on it.  I want to use the configurator to stop the device being paired with anything else not allow it to connect to any other Macs.  I've connected it, backed it up, enabled supervision, then deployed the profile.  Through out all of this I never get the option to restore device settings and when I click on edit stored backups, it contains nothing.  With supervsion disabled I can restore the backup but, snag is to disallow pairing it needs to be supervised.
    Also, am I right in thinking that once it's supervised I can't install any apps directly from the device ?
    Sorry if these are really noddy questions :-)  I just want to stop the device from being able to connect to or pair with anything other than my mac.
    Thanks
    Will

    Jpegs can't have transparent areas. Most likely you had layers and were forced to save "as a copy", which means that the image which remains open in PSE is not the jpg. A file saved as a copy makes a copy in the save format, but it's not like save as where you now see the newly saved version instead of the original. The original remains open and unsaved onscreen.

  • How do I create a configuration profile that has wireless settings including a manual proxy server.

    I can configure the wireless network using the IPCU but cannot set the proxy server settings.
    I'm sure that this is simple but just can't work it out!

    IPCU does not currently allow entry of proxy server settings.  This must be done, from the device, for each wi-fi network.  It would be great if it did.....

  • Add new configuration item in the List Settings

    All,
    I would like to add a new item "configuration" in the list settings. For example, the list settings already have following items
    List name, description and navigation
    Versioning settings
    Advanced settings
    Validation settings
    Audience targeting settings
    Rating settings
    I would like to add a new one and do coding on it
    Thanks ^_^

    Hi Andy,
    Thanks for posting your query, Kindly browse the below mentioned URLs to add custom properties in List/library settings step by step
    http://sp2013.blogspot.in/2013/01/sharepoint-2013-list-custom-form.html
    http://www.enjoysharepoint.com/Articles/Details/create-custom-list-property-in-sharepoint-list-settings-10536.aspx
    http://www.c-sharpcorner.com/UploadFile/sagarp/create-custom-list-property-in-sharepoint-list-setting/
    http://johanolivier.blogspot.in/2010/07/custom-settings-for-sharepoint-list-or.html
    http://www.dotnetspark.com/kb/5657-create-custom-list-property-sharepoint-list.aspx
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • How to configure number of concurrent processes in XI?

    Hi experts,
    I have a simple interface:
    FILE -> XI -> FILE
    The input file is a huge file containing thousands of records.
    XI will split the huge input files, so that each record gets written to one file each.
    Owing to the huge number of files being generated, I have many messages in status = "To Be Delivered" in the RWB.
    When I do a filter for status = "Delivering", I see 4 messages in that status. (Of course the message IDs will differ from time to time, but at any point in time, I can only see 4 messages with the status = "Delivering").
    How can I increase the number of concurrent processes that produces the output files?
    Please advise.
    Thanks.
    Ron

    Ron,
    From this perfromance tuning guide , page 12 ,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
    <i>The Adapter Framework requires a set of fixed application threads within the J2EE Engine for proc-essing different internal messaging queues (AFW queue, BC Adapter, CIDX Adapter, and so on). Ad-ditionally, certain channel configurations also require a fixed set of application threads (for example, RFC sender channel, File adapter channels). This may require a higher number of application threads. Therefore, within the J2EE Engine configuration (configtool or Visual Admin), go to:
    Global Configuration -> Server -> Kernel -> ApplicationThreadManager
    Set the MaxThreadCount property to 300</i>
    Not sure if this is the exact property but this is sure worth giving a shot.
    Regards
    Bhavesh

  • ALE-manual configuration of the customer distribution model

    DEAR EXPERTS
    how do i manually configure the customer distribution model

    hi ,
    to maintain or configure the customer distribution model (CDM)
    go to tcode BD64.
    give the sender address -
    you have to mention the logical system name of the sender system. if u r sending one version to other then you have to specify  the sender system address,
    give the receiver address--- same as  above but mention the details of receiver system.
    meaintain the message type--- depends upon the type of applicaiton using like MATMAS or ........
    do the same procedure again in the reverse way to transer the information from one system to other system and vice versa.
    next step is to generate partner profiles.
    BD82 is the tcode for it
    next distribute CDM.
    thats it.
    If u find it useful mark the points
    Regards,
    GNK.

  • HT204389 How to get siri on iPad 3 gen to the latest update and it still won't pull up even in settings what can i do

    How to pull up siri when I have have a 3rd gen iPad and have the60.1 iOS update and siri won't pull up in settings or any we're what can  do

    Go to settings, general, Siri and make sure it is turned on. Then press and hold the home button and Siri should pop up.

  • IOS Wifi SSID configuration displaying a subtitle in settings description cell

    Does anyone know how to configure a wifi connection in order to have the following description in the settings (a cell including a title and a subtitle).

    I have noticed the same underline / under title / subtext on KPN Fon networks in The Netherland, showing KPN WiFi.
    No clue at all how the show this. Though in my case I have actually an app installed monitoring that network SSID. Joining will also start this app to act.

  • Is there configuration setting file that shows settings in visual admin

    Is there a configuration file or text file that shows visual admin parameter settings that i view without starting up visual administration.
    Thanks
    Weyland Yutani

    The use of Visual Administrator is the fact, that those "configurations" are spread across the filesystem and in the database. You could do everything done with VA also by hand by editing .properties files or change XML files.
    Markus

  • Manualy configure new account, Where are settings.

    Downloaded Thunderbird yesterday.
    I need to manually configure a new account for my new (own domain) email address hosted by a hosting company. For this your instructions say something like - Go to settings & select manual entry.
    The Settings tab does not exist. You cant select to manually enter details.
    The automatic entry makes a mess of the settings.
    After the automatic entry, by fiddling about I found a way of editing some (not all) of the settings but I still cant make it download my inbox & imap folders.
    Is the settings tab (for manual entry) hiding somewhere in the latest Thunderbird version?. Please Advise.

    The wizard gets it wrong, I get that. So you correct the information in the wizard and test again and it should work. So please tel me what setting your need that is not available.

Maybe you are looking for