Configure "Remark" for Digital Signature

I have read several posts about setting up digital signature for using in documents to get them approved. However, I have not found a post that outlines steps to configure with a "pre-populated value" for Remark.
For a digital signature we can make a "Remark" required. But how do we default it to a certain value. Any suggestions?
Need some urgent input. Thanks in advance.

No one has done this before?
No one has any knowledge of how to get this done?

Similar Messages

  • Configuring SSF for Digital Signature.

    Hi, All,
    I m created a Status network for docuemnt.
    For 'release' status i fixed Signaure Strategy.
    For 'Releasing ' the document the authorized person should 'sign' ie digital signaure.
    During digiatal Signature, the system gives this mensage 'SSF information for the SAP user not found'
    note:I have only one signaure for 'Release' status.
    How i can config SSF
    Rgds,
    Ben

    Hi,
    I think this link will help you.
    http://help.sap.com/saphelp_nw70/helpdata/en/53/251a355d0c4d78e10000009b38f83b/frameset.htm
    Regards,
    Sunny

  • Use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature?

    Dear all,
    I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
    I know there are 3 options for digital signature and
    System signature with authorization by user ID and password (We use this currently)
    Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
    User signature without verification
    Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
    I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
    My active directory is based on Windows 2008.
    Thanks in advance!!
    Dhee

    Actually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.

  • Configure the stamp ,Digital signature and water mark in DMS

    Hi...
    I want to configure the stamp ,Digital signature and water mark in for my client in DMS.
    Stamp:detaiils showing doc type, doc status,who has open, doc no,version,date and time
    Digital Sign:with respect to approval (system should ask user name and password while approvig)
    Water mark:for the status (Draft/approved)
    Can anybody guide me to do this?Please explan in details as i am doing it first time.
    In addition to do this what addition system requirement is needed?
    Regards,
    Sandip

    Hi Sandip,
    Please refer below links for required details
    For Redlining   Redlining
    Watermark      DMS Seal system watermarking solution
    Hope this will answer your query.
    Regards,
    Deepak Kori

  • Programmatically Accessing Self Sign in Plug in for Digital Signature

    Hello There,
    We are looking forward to use “Adode Acrobat 9 Pro – Self Sign in Plug in” for one of the application to digitally sign PDF document i.e. appending signature to existing PDF document. We have gone through Adobe site (http://learn.adobe.com/wiki/download/attachments/52658564/samplesignatures.pdf?version=1 ; http://www.adobe.com/ap/epaper/tips/acrsignatures/ ) and explored “Tips and Techniques” along with screenshots.
    We would like your help on following queries:
    ·         Can we programmatically from C#.NET access Adobe Object and create certificate for digital signature? If Yes, can you please provide pointers, references and sample code snippets? [We understand that we do not need to purchase SDK as Professional would be sufficient for digital PDF signature]
    ·         Does Adobe Pro installer provide DLL which can be leveraged in Code base i.e. C#.NET?
    ·         How does certificate management work for digital signing? Can third party like verisign, local computer / certificate from organization server work for digital PDF signature?
    ·         Please provide Technical Reference manual to use Adobe from C#.NET
    ·         Can you please throw some light and pointers on Licensing and Cost?
    We are running on a deadline hence your quick help and response will be highly appreciated.
    Thanks & Regards

    best check on the sdk forum:
    http://forums.adobe.com/community/acrobat/acrobat_sdk
    sdk docs can be found here:
    http://www.adobe.com/devnet/acrobat/?view=documentation

  • Is SharePoint Enterprise Needed For Digital Signatures?

    Hey SharePoint Fam,
    Had a request come in for Digital Signature use and was wondering is this even possible without Enterprise version?  We are on Standard 2010 version......
    Thanks n advance

    Waqas is right, you can use digital signatures with SharePoint Standard.
    More information on the
    CoSign Connector for SharePoint.
    CoSign offers free trials for integrating digital signatures with SharePoint:
    1. A private SharePoint site for your personal use, with CoSign installed, on a SharePoint server run by CoSign. 
    2. You can then request an on-premises trial copy of the CoSign Connector for SharePoint to try it on your own server.
    In addition to being a standard, open solution, digital signatures from CoSign enable your documents never have to leave your network during the signing process.
    Request a free trial.
    Disclosure: I work for CoSign

  • Save method for digital signatures

    Hi - I have several thousand forms all set up for digital signatures, which I use for locking down the form fields (render read-only). This works fine. The problem I have is that when a user digitally signs the form, they automatically get asked to Save As - with a default location on the local machine. Can this be changed to allow the user to simply save and overwrite the form in its original location. Of course there is a danger with doing this, but users with document/case management systems do not necessaritly know where to save the document, so basically they want to open up the form from their CMS/DMS, complete it, digitally sign it and simply save (automatically back in the location they launched it from.
    Does anyone know where I can even look - I have trawled the registry, the digital signature settings, etc, but no luck.

    Hi - these are all reader extended through Livecycle ES Reader extensions and are signed by users in Reader. What I am asking is if anyone has an idea where this behaviour is declared, so that I can change it.

  • Java SSF for Digital Signatures and Document Encryption

    Hello,
    I have read in "SAP Help - Java Development Manual" that there is a Java SSF library for Digital Signatures and Document Encryption API.
    http://help.sap.com/saphelp_nw04s/helpdata/en/4f/65c3b32107964996a56e4165077e24/frameset.htm
    I am trying to develop an example application in NWDS using Interfaces/classes (ISsfData, SsfDataXml...), but NWDS does not find this classes in any library.
    I have searched for Javadocs in NWDS plugins directory and this classes and interfaces should be in JAR com.sap.security.api.jar, but they aren't there.
    Our WAS version is: NW04s WAS 7.0 SP11 and he have downloaded Java Crypto Library (IAIK) and also SAP XML Toolkit.
    Does anyone know how to find or obtain this library?
    Thanks in advance,
    Jorge Linares

    Hello Francesco,
    I want to  generate a digital signature (PKCS#7,XML) using SAP SSF API as explained in
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/65c3b32107964996a56e4165077e24/content.htm and in Amol Joshi's reply in
    Digital Signatures and Document Encryption api
    so my question  is From which PI/XI version and its SPS this SAP SSF LIBRARY is supported ?
    Kind Regards,
    Kubra fatima.

  • Any BAdi for Digital Signature?

    ECC 6.0
    Does anyone know of a BAdI, Enhancement Spot or exit for digital signature where I can detect the object that is being signed (in this situation Engg Change Management) and perform some follow on process (specifically call a Workflow API to create an event for Workflow)?
    Cheers,
    Ramki Maley.

    Hi,
    Thanks for your request. We have added it to our feature backlog and shall try to incorporate it in one of our future releases.
    Thanks,
    Shefali

  • Does the iOS app allow for digital signatures ?

    does the iOS app allow for digital signatures ?

    Hi,
    Currently, Adobe Reader mobile products (for iOS, Android, Windows Phone) do not support digital signatures.  But you can add handwritten signatures (as annotations) to PDF documents.
    For digital signatures for legally binding documents and contracts, I'd recommend the desktop version of Adobe Reader or Acrobat Pro/Standard.  Alternatively, you can use Adobe EchoSign for e-signatures.
    About Certificate signatures | Digital signatures
    Electronic Signature Software, Digital Signatures | Adobe EchoSign

  • Automatically renewing certificates for digital signatures

    Is it possible to setup some form of system that automatically renews the user certificate for digital signatures? If so, where can i find information on this?

    Hi - these are all reader extended through Livecycle ES Reader extensions and are signed by users in Reader. What I am asking is if anyone has an idea where this behaviour is declared, so that I can change it.

  • How to configure CoSign Electronic Digital Signatures for UCM 11g

    Hi everyone,
    current I am doing a UCM poc with CoSign Electronic Digital Signature for a customer, this case is that when user approve a check-in PDF document in workflow, the user can use "sign and approve" to invoke the electronic digital signature action.
    since ECM 11g is based on weblogic, I configured the keystore for the weblogic as the below steps:
    1) use keytool to import a keystrore file just as cosigncert.jks from the cert file which provided by the vendor CoSign.
    2) Security Realms->myRealm->Providers->Credential Mapping, create a new provider using "PKI Credential Mapping Provider" and configure the storekey cosigncert.jks for this provider.
    3) Security Realms->myRealm->Providers->Authentication, select DefaultIdentityAsserter and add x509
    4) configure storekey for AdminServer and UCM managerServer using cosigncert.jks
    5) configure SSL for AdminServer and UCM managerServer.
    after finishing this steps, access the UCM console to do the approve with siginature. but it always throw "can not find the validate certification path"
    does any one know which step missing?
    Thanks & Regards
    shifeng

    Take a look at this chapter in the manual http://docs.oracle.com/cd/E23943_01/doc.1111/e10978/c03_repository.htm#CSMRC1611
    (Electronic Signature is now a feature of WebCenter Content; if you are looking for a 3rd party solution for signatures, but perhaps also timestamps, check what partners can do for you)

  • Support for Digital Signature in PDF

    Where can I found documentation about how to use and configure this feature?
    Thanks!!

    I have identified the solution for embedding digital signature in adobe form. The below link will be useful.
    http://scn.sap.com/docs/DOC-41794
    Thanks & Regards
    Vinoth Kumar M

  • How to extract certificates from IE for digital signature

    hi
    how to extract certificates from the cert store provided by Internet Explorer 6.0 and use it to read & verify the digital signatures present in the pc.this is needed in my web based application n i have no idea!!!
    pls help me out
    i have studied a lot about all JCA n JCE but the extraction part still baffles me!!!
    my application will be java based so i can make an applet/ servlet/ jsp
    drop your ideas as soon as u get time as i am stuck in the initial phase itself
    priya_16

    hi
    i've the same problem. i've found this solution, but you need download a JCE Provider that allow you to read the explorer certificate store.
    You can try this one: https://download.assembla.se/jceprovider/
    and the code:
    import se.assembla.*;
    public class Listcerts {  
         public static void list() throws Exception{
              java.security.Security.insertProviderAt(new se.assembla.jce.provider.ms.MSProvider(), 2);
              KeyStore ks = KeyStore.getInstance("MSKS","assembla");
              ks.load(null,null);
              X509Certificate cert=null;
              String alias=null;
              int count=0;
              for (java.util.Enumeration e=ks.aliases();e.hasMoreElements();){
                        alias=(String)e.nextElement();
                        cert=(X509Certificate)ks.getCertificate(alias);
                        System.out.println("\n Certificado alias"+alias+":");
                        System.out.println(cert);
                   count++;
              System.out.println ("NUM CERTS="+count);
    now, i need the same solution for Firefox browser XP
    good luck
    Message was edited by:
    meteko

  • How do I resolve: Field Selection dialog [Pick... button] in "Mark as read-only" section of Signed tab for Digital Signature field is not working

    I am using Acrobat Pro X on Windows 7 Enterprise x64 to create a form. When I have a simple form with a few fields, I am able to use the "Pick..." button to select the fields I want to select, but in a more complex form (20 fields with 3 Signature fields) The Field Selection dialog does not work. I can make the selections, but they are not saved. Removing fields does not resolve issue. IF I start with a blank form and add a few fields, the dialog will work, but after adding more, it quits working. Reader XI is also installed.

    And that is why many responders use only the custom JavaScript calculation option.
    The UI for the select fields and simplified field nations are only a way to pass field names to a JavaScript function that performs the actual calculation. Sometimes these functions call other functions and pass the parameters can lead to errors in the attempted code.
    I would start to learn code JavaScript for Acrobat.
    The pick field dialog is for performing calculations involving sums, products, averages, minimum, and maximum. I am not sure how that would work with a digital signature. Once a signature is applied the form fields could be locked.

Maybe you are looking for