Configure rmg 2010 published sites for office 365 hybrid

Tmg 2010 publishing all exchange services I am using the same servers for hybrid office 365 and I am not ablet to migrate from cloud to onpremise
What listener should I create for ews and autodiscover to work
Wants is required on TMG

Hi and thanks for the reply, sorry for the typo
i am doing this setup @ a customer site and they already published all exchange web services as OWA, active sync through TMG
now i am not able to understand what i need to change in TMG to make things work 100%
i have already followed this like to make the HCW work and it did it
http://community.office365.com/en-us/w/exchange/1042.how-to-configure-tmg-for-office-365-exchange-hybrid-deployments.aspx
now the only issue i am facing now is migrating a mailbox from office 365 back to on premise
i get this error related to authentication
The call to 'https://link/EWS/mrsproxy.svc' failed. Error details: The HTTP request is unauthorized with c
lient authentication scheme 'Negotiate'. The authentication header received from the server was 'NTLM,Negotiate,Basic r
ealm="webmail.srmcc.net"'. --> The remote server returned an error: (401) Unauthorized..
    + CategoryInfo          : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : [Server=AMSPR01MB215,RequestId=1c6b5a8f-5a17-4611-8388-5895a553c6ff,TimeStamp=4/15/2014
   5:39:46 PM] [FailureCategory=Cmdlet-RemoteTransientException] 47950287,Microsoft.Exchange.Management.RecipientTask
s.NewMoveRequest
now i found this link that i want to share with you and to confirm it is the solution, also if it is i need to know some details on how to apply it
http://blog.mygeeklab.com/2012/01/24/office-365-tmg2010-and-ews/
currently there are 3 FW polices publishing OWA, Active Sync and outlook anywhere
all of them are using the same listener -authentication is NTLM form based authentication / validation method is windows active directory
ports for the listener is http / https !
all FW polices for publishing the above 3 uses basic authentication except for the OWA uses NTLM authentication
and all of them don't have the "but clients my authenticate directly delegation" settings
please note i am not a pro in TMG i am an office 365 and exchange guy ! so please i really need your help to get this through since it is stopping my work
regards

Similar Messages

Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15

Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15
We need to set up a hybrid server to allow us to begin moving mailboxes to Exchange Online. We created a new Server 2012 R2 server with Exchange 2013 SP1 to act as our Hybrid server. Reading the literature leaves me with questions about what
certificates I need. My understanding is that the certificates in play on the on-premise Exchange 2010 servers don't need to be changed.
I've looked at the TechNet article "Certificate requirements for hybrid deployments"
http://technet.microsoft.com/en-us/library/hh563848(v=exchg.150).aspx
Certificate requirements for the new Exchange 2013 SP1 server are still unclear to me, I think the new server needs a SAN certificate with:
Hybridserver.domain.edu
autodiscover.domain.edu
EWS.domain.edu
Can anyone clarify?

Cert is required only if you want to deploy ADFS for SSO.
Otherwise you can use your existing Cert for all the Services
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Configuring blackberry business cloud services for office 365

HI,
As of now we are in process of moving to office 365 . We have to configure office 365 for blackberry devices .
Here we have Blackberry enterprise server and devices are Blackberry Curve and Bold , etc .
When i gone through the technet i have seen two options.
1.Blackberry® Business Cloud Services (BBCS) from BlackBerry
2.BlackBerry®
Internet Service (BIS)
Which one i need to prefer based on my server and devices .If i go for BBCS , how to setup and configure.
Please anyone hep me on this.

You need to refer to the option 1
1.Blackberry® Business Cloud Services (BBCS) from BlackBerry
Refer this Document
http://us.blackberry.com/business/products-services/cloudservices.html
This gives the Architecture in detail
http://www.itproportal.com/2012/06/27/bis-bes-and-blackberry-services-office-365/
Regards Chen V [MCTS SharePoint 2010]

Variation root must be a Publishing site in Office 365

I'm trying to create site variations of all site collections in SharePoint 2013 online (Office 365) to accommodate different languages, and I'm getting stuck very early on. After going to Home -> Site Settings -> Variation Settings and trying
to create a variation of the top-level website (i.e. '\'), I get the error
Variation root must be a Publishing site.
Is there something really simple that I'm missing here? Any ideas?
Currently We are creating site Collection with Custom Template and after activating SharePoint Server Publishing Infrastructure Feature got variation setting and other variation options
Variations
Settings
Variation
labels
Variation
logs
While creating Variation labels its giving error Variation root must be a Publishing site.
Please provide some proper input on this error.
Thanks in Advanced!!!
Thanks!
Vivek Kumar Pandey

Hi Vivek,
Beside the SharePoint Server Publishing Infrastructure Feature
at the sitecollection you need to activate the SharePoint Server Publishing site feature. Then are prerequisities are met!
Kind regards,
Joran Markx

Migrating SP 2010 to SharePoint Online (Office 365) - Site Template issue - Any advice?

Hi there,
I am migrating our SP 2010 site collection to O365 SharePoint Online. The new sites do not show up fine, I suspect this is because I am choosing wrong site templates. Any advice on this will be appreciated.
Thank you.

You can test this if you open your office 365 site in your browser, and then off IE menu, view source, and search for
g_wsaSiteTemplateId
then you can see what that results in, possibly g_wsaSiteTemplateId = BLANKINTERNET#0'
do same steps for your SharePoint site, if they have the same value for g_wsaSiteTemplateId, you'll need to export content granually, each list and library and then upload to your Office 365. There are 3rd party tools out there that will do this for
you too. for ex,
http://www.metalogix.com/cloud1/cloud-acceleration-suite-for-Office-365?utm_source=Bing%20Ads&utm_medium=cpc&utm_campaign=701a0000000ug99
Stacy www.sharepointpapa.com

Custom Site MailBox for Office 365 SharePoint 2013 online

Is it possible to create programmatically create site mailbox for Office 365 SharePoint 2013 online?
How to customize site mailbox email address like [email protected]

Hi,
In SharePoint 2013 Online, if you want to sync document library with local drive, you can use OneDrive to achieve it.
http://office.microsoft.com/en-001/support/sync-onedrive-for-business-or-sharepoint-site-libraries-to-your-computer-HA102832401.aspx
Best Regards
Dennis Guo
TechNet Community Support

How to Enable Ratings on SharePoint List using Client Object Model for Office 365 SharePoint Site.

How to Enable Ratings on SharePoint List using Client Object Model code for Office 365 SharePoint Site.
Thanks in Advance
Rajendra K

Hi Rajendra,
here you are the code and the blog, let me know if this helps
using (ClientContext ctx = new ClientContext(https://yourSiteUrl))
Web w = ctx.Web;
List l = w.Lists.GetByTitle("yourListName");
ctx.Load(l, info => info.Id);
ctx.ExecuteQuery();
string ListID = l.Id.ToString();
Microsoft.Office.Server.ReputationModel.Reputation.SetRating(ctx, ListID, 1, 5);
ctx.ExecuteQuery();
http://blogs.technet.com/b/speschka/archive/2013/07/08/how-to-use-csom-with-ratings-in-sharepoint-2013.aspx
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

SP 2013 Client Object Model: What credentials to use for Office 365 and sites behind ADFS 3.0?

I'm using the SharePoint 2013 Client Object Model to access a site that is either in Office 365 or behind an ADFS 3.0 login screen, is it sufficient to use the new SharePointOnlineCredentials credentials
or do I need other types of credentials for the sites behind ADFS 3.0 ? Is so, what type of credentials would I use for the sites behind ADFS 3.0?
using (ClientContext ctx = new ClientContext(siteUrl))
ctx.Credentials = new SharePointOnlineCredentials("some user", "a secure string password");
while (ctx.HasPendingRequest)
ctx.ExecuteQuery();
// etc.

Hi,
According to your post, my understanding is that you want to know the ways to get credential either in Office 365 or sites behind ADFS 3.0.
For Office 365, you can use SharePointOnlineCredentials Object to get credential. For SharePoint sites behind ADFS 3.0, you can use NetworkCredential Object:
ctx.Credentials = new NetworkCredential(UserName, Password, Domain);
The link below will provide more information about using the ADFS FedAuth Token programmatically through the SharePoint Client Object Model:
http://samirvaidya.blogspot.com/2013/05/using-adfs-fedauth-token.html
Best regards
Patrick Liang
TechNet Community Support

Certificate configuring for exchange 2013 and office 365 hybrid deployment

Please advise on what digital certificate requirements for hybrid deployment and to configure it.

Hi sphilip,
If you want to deploy AD FS with Single Sign-On(SSO), we need use certificate to establish secure trust between on-premises Exchange 2013 and Office online.
We can use and configure a trusted third-part CA within all on-premises Exchange 2013 Mailbox and Client Access servers to ensure secure mail transport, more details about
Office 365 Hybrid Configuration Certificate Planning, for your reference:
http://blogs.technet.com/b/neiljohn/archive/2011/08/25/office-365-hybrid-configuration-certificate-planning-adfs-exchange-web-services-owa-oa.aspx
Best Regards,
Allen Wang

Need assistance creating applications with superseedence to uninstall Office 2010, Lync 2010 and then install Office 365 click to run 2013

We are getting ready in a few months to uninstall our locally installed Office 2010 and head to the cloud with Office 365 2013. I have created applications to uninstall Office 2010 and Lync 2010 and then added them to the supersedence tab for Office 365
office 2013 click to run with appv5.
When deploying the office 365 2013 application it does not uninstall office 2010 or lync 2010 with the supersedence. I am able to manually uninstall Office 2010 and Lync 2010 with the command lines I am using in the applications.
The application uninstall for Office 2010 is:
The application uninstall is an exe so I created an application, created a deployment type with the location of our Office 2010 admin point, installation program and uninstall program are set with the same line as I have tried to deploy it separately and
also as a supersedence in the Office 365 application setup.exe /uninstall ProPlus /config "\\sccmserver\share\Office2010\ProPlus.ww\silentuninstallconfig.xml. The silentuninstallconfig.xml was created from the original config.xml file and edited
to these settings:<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="NO" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="Reboot" Value="Never" />
<Setting Id="SETUP_REBOOT" Value="NEVER" />
<OptionState Id="ProductFiles" State="Local" Children="force" />
</Configuration>
The detection method is the folder path to see that office 14 exists. When I deploy this the machines finish with success showing this exists, but does not uninstall Office 2010.
running the command line manually mapped to this location on a machine uninstalls office 2010 without issue.
Lync 2010 uninstall:
Lync is an exe so I am using the LyncSetup.exe /silent /uninstall. The application is in the supersedence tab for Office 365 2013. This never installs. If I create a softare distribution and deploy it on its own it uninstalls without issue.
We are going to use Lync 2013 with our office 365 2013 installation so we need to uninstall this. The detection method for lync is file system folder and the Microsoft lync folder for detection.
MS Office 15 (Office 365) was created with the click to run tool. I can install this with the application I created using the appv5 package created with the click to run tool. The issue is we need Office 2010 and Lync 2010 uninstalled first.
Having both versions of Office installed in test has caused issues where Office 15 365 will not list in add and remove programs and cannot be uninstalled even with the fix it article to remove office 2013.
I have looked at many articles and so far it is not working for us. Any help appreciated to get us to the cloud.
Thanks,
Brit

The applications I have for uninstall of office 2010 and Lync 2010 for some reason do not uninstall. Manually testing the command lines they do. The detection method seems to be hanging things up. On the lync uninstall detection method I have
the setting type of file system, type folder, path c:\program files\ folder name Microsoft Lync.
I highly recommend using something other than a file/folder "exists" detection method. Installers are constantly leaving things behind due to environmental inconsistencies. It may leave files/folders behind with a schedule to delete files on next reboot.
These things are unpredictable and very hard to use. I just use the "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall" Registry location. There you can actually key off the "Product Version" DWORD as well which gives you an even more accurate method
to determine if the application you are trying to deploy (or expect to exist) is truly there. This, of course, being if you are not using an MSI. If you have MSI technology ALWAYS use the product code unless the person writing the MSI chooses to use the same
product code for every version release of their product. In which case, Use the registry method.
As far as getting the supersedence and everything working. You need to start from the basics. Create Applications for all of the apps you want to remove. Make sure they install and uninstall properly (seems like overkill but it isn't that hard). Once you
have working install/uninstall applications then you can easily apply supersedence to your new applications with a setting of Uninstall on the superseded apps you should have no problem getting rid of them. I have done this for numerous things.
For example, I did this with Cisco Jabber to replace older versions of jabber, older versions of cisco unified personal communicator and lync and OSC. All of these replaced versions had to have an Application but once it was in it took two seconds to apply
all the supersedence rules and now I know when I push that software out no matter version is running on any machine it will pull all the old apps off and put the new one on.
Dustin Estes - MCP | www.dustinestes.com

In SharePoint site at Office 365, is there any possible to change the notification mail instead of using default Exchange mail id in SharePoint online?

A customer using SharePoint site in Office 365 and they configured workflow, notification alerts, etc and now by default they are receiving mail in the registered account (for example: [email protected]) and now i want to change it to their
company email id.
Is that possible?

You should setup domain for Office 365 - Add your users and domain to Office 365
[custom.development]

Error in migrating SharePoint 2010 list fields to Office 365 list [CSOM]

Hi,
I am trying to migrate a SharePoint 2010 list to Office 365. I created a new ListCreationInfo for a new list in O365. But when i am to trying add fields from SP2010 list, its giving me an error after list.update() -
A duplicate field name "fa564e0f-0c70-4ab9-b863-0177e6ddd247" was found.
if (!l.Hidden)
ListCreationInformation creationInfo = new ListCreationInformation();
creationInfo.Title = l.Title;
creationInfo.TemplateType = l.BaseTemplate;
List list = web.Lists.Add(creationInfo);
//Fields in the list
ctxOnPrem.Load(l.Fields);
ctxOnPrem.ExecuteQuery();
foreach (Field f in l.Fields)
list.Fields.AddFieldAsXml(f.SchemaXml, true, AddFieldOptions.DefaultValue); list.Update();
Note- l is the SharePoint 2010 List.

Answer given on StackExchange -
http://sharepoint.stackexchange.com/questions/128875/error-in-migrating-sharepoint-2010-list-fields-to-office-365-list-csom/129015#129015
Thanks,
Thomas

Detection rule for Office 365

Hi
I'm about to create a application for Office 365 in Configuration Manager 2012 R2.
I've seen recommendation to look for %programfiles%\Microsoft Office 15\root\Office15. But will that not break when office is upgraded on the client?
In registry I've HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\O365ProPlusRetail - en-us. And for the looks of it I cannot use this if a user decides to download and install a different version than en-us.
Any idea on what detection rule I should use for Office 365 that works for next versions of Office 365 (office 2015)?

Using folder check for "%programfiles%\Microsoft Office 15\root\Office15", might be a bad
idea.
You need to use the full path to WINWORD.exe or something.
If you install Visio using Office 365 it will end up in the same folder, and that will make wrong detection of the application!
You don't have to worry about the version of Office when running Office 365, but you can get the version directly from the
WINWORD.exe if you for some reason wants to use it...
I would recommend that you don't check for the version though.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Adding Licenses for Office 365 Pro Plus and Power BI

Hello. I have one license for Office 365 Pro Plus and one Power BI license. I want to buy another Power BI license to assign to a prospective client so he can log on to my Power BI site and view Power Pivot reports in the browser. I think that I need to
purchase an additional Office 365 Pro Plus license ($12/mo) as well as an additional Power BI license ($40/mo). Is this correct?
My other question has to do with what I believe is referred to as my Organizational account. I have one for Office 365 and a different one for Power BI. That is, my logins are different for the two subscriptions. I'm not sure how this happened or even if
it's important. I have had no issues installing Office 365 on my desktop, laptop and tablet and I can upload files to my Power BI site and access them. Does it matter that my organizational accounts are different?
Finally, if I have it correct in paragraph 1 that I need an additional license for both Office 365 Pro Plus and Power BI, do I just login to the two separate organizational accounts and add a license to each one?
Thank you.
Regards
Arthur

Hi Guy. I went ahead and purchased both licenses. The Office 365 is only $12/mo so it's not a big deal.
After getting that great information from you on the other post, I contacted Microsoft support and got this issue straightened out. I did have two accounts (domains). They had me cancel my Office 365 subscriptions on the account that I purchased those subcriptions
on and then resubcribed to Office 365 on the Power BI account.
Thanks again for all of your help.
Regards
Arthur Jenkins

Install Project Pro 2013 and Project Pro for Office 365

Does anyone know if they can be installed side-by-side? From what I can tell it looks like they cannot be installed side-by-side. For example I have a trial version of Project Pro installed, so there's no link in the Start Menu for Project Pro for Office
365...
Is there something missing?
Thanks,
Roland

Hi Roland,
I'm not sure I follow your comment "there's no link in the Start Menu for Project Pro for Office 365". I successfully ran Project 2010 (MSI) alongside a trial of Project Pro for Office 365.
Why do you wish to run both side by side? Have you considered installing one into a virtual machine?

Configure rmg 2010 published sites for office 365 hybrid

Similar Messages

Maybe you are looking for