Configure Routine of VL02N with output type

Hi,
I need to create a routine for VL02N for goods issue and configure it with an output type....can anybody please provide the config steps .
How to link the routine with the output type.....
I have created routine in tcode VOFM under output control with application area V2 (shipping).. Next what are the steps i need to follow
Edited by: subhajit bhadra on May 12, 2010 7:53 AM

Hi,
Go to NACE -> Select application V2(for delivery) -> Click on Procedures -> Select the procedure -> click on controls -> Add the output type -> Assign the routine . I think routine '1' will serve your requirement.
Regards
Vinod

Similar Messages

List of script and smart forms(except TNAPR) with output type or print prog

How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA whch form should use.kindly help on this

Hi
WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
Max

How to send invoice through email with output type RD00?

What are the configuration settings to send invoices through email with output type RD00?

Hi,
Please go through the following links:
[E-mail|Email Configuration Settings]
[e-mail|Re: EMAIL BILLING DOCUMENT TO CUSTOMER THROUGH SEND MAIL OPTION IN VF02]
After triggering the output,goto T.Code SOST and process it.
So that e-mail will be triggered immediately.
You can use External send/EDI/simple mail for this.
Regards,
Krishna.

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

KE30 decimal not display in quantity column with output type object list

Hi everyone,
I already set number format "0.000" in change form screen but when I execute report with output type object list (ALV) that report don't display decimal in quantities column e.g. 0.470 displayed to 0 .
How can I set number format in output type object list on Transaction code KE30?
Thanks in advance.
Pipit

Hi,
Better to raise this issue in CO Forum. You can expect some solution.
regards

Printing issue in smartform with output type

Hi ,
I am facing issue while I am taking print from zebra printer.
I am trying to take a print from MB90 but its not coming but its giving status 'processed' and same from the spool, in spool its showing status complete but not giving any printout.
if I m attaching my smartform with another output type which already working for another label(smartform), then its giving print.
So, what I want to know..
Its can be a problem with output type config or from basis side.
Please help.
Thanks,
Sandeep

well i have seen setting are correct but having one issue it doesnt trigger automatically I do it manually from MB90 and rest of the things are correct becaoz i have seen while debug its going correct form from driver program, when i am runniing from MB90 manually .
Thanks,
Sandeep

Configuration output type for VL02N - creating output type

Dear Sapguru,
I want to configure output type for VL02N transaction for IDOC creation,Here scenario is to connect SAP to third party system in IS retail.
VL02N- Output type configuration In only return delivery case.
Can anybody guide step by step cycle configuration for output type.Looking forward for your quick reply.
Note: Output type required for IDOC,to communicate with third party system,not for print function.
Thanks.

Dear Anup,
If my understanding is correct,
This seems to be a outbound Idoc scenario where Idoc will be sent by SAP to third party for a return delivery notification.
Output type configuration steps are as follows :
1) Identify the standard output type (Application - V2, Transmission Medium - 6 ) for e.g. LAVA which is very close to your requirement.
2) Use this output type as a reference & create a copy output type of your own.
3) Use a suitable access sequence or create your own access sequence as per your requirement.
4) Assign access sequence to the output type.
5) Maintain output determination procedure (connect your output type to a suitable procedure )
6) Assign output determination procedure. (to your delivery document type)
7) Maintain required output condition records through T Code - VV21 against your newly created output type.
8) Set up the partner profiles as per your requirement (T code - WE20)
9) Check the reflection/ effects of your new output setup at the delivery document level (VL02N).
You may quickly access these settings through T codes - NACE.
Tables - TNAPR, NAST
Hope it will help you in the set up.
BR,
Anubhav

Problem with output type--urgent

Hi experts,
My requirement is i need to post a vendor lkiability. For that we create a output type 'ZALV'. We also created a report program . In nace we attached the program and output type with medium '8'. we call the same subroutine Entry which available in standard program (CMSR_OUTPUT_ENTRY whcich is attched to medium 8 and o/p type:CMSF). Up to this one my output type works fine and processed successfully.In that Entry some function modules called.
When i added my own code in report program it gives a error
saying that '   POSTING_ILLEGAL_STATEMENT".
   Statement "CALL SCREEN" is not allowed in this form.
There is probably an error in the program
"SAPLTAX1".
This program is triggered in the update task. There,
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
In my code i am not used these statements also.
The error in code is:PERFORM skftabn_ergaenzen.
xbset-first = 1.
xkzinc = space.
IF bkpf-xmwst = 'X'.
ok-code = 'CALC'.
IF bkpf-xsnet = space.
    xkzinc = 'X'.
ENDIF.
ELSE.
ok-code = 'PRUF'.
ENDIF.
IF i_xsimu NE 'S'.
xnodia = 'X'.
ELSE.
xnodia = space.
ok-code = 'SHOW'.
ENDIF.
Bild dunkel prozessieren -
       evtl. veraenderte Steuern merken
IF xusvr = 'X'.
PERFORM ustaxes_detail USING i_bkpf.
ELSE.
IF sy-tcode(1) = 'M'
or bkpf-tcode(1) = 'M'.
OR bkpf-tcode(1) = 'M' OR NOT dynpro_501 IS INITIAL.
    CALL SCREEN 301.
ELSE.
    CALL SCREEN 300.
ENDIF.
ENDIF.
ok-code = space.
Please give me a solution --- It is very urgent.
Regards
Pratap.M

Hi ,
Use this one . These are standarrd includes you need to include.
INCLUDE riprid01.            " General DATA and TABLE struct.
INCLUDE riprif01.               " General PRINT routines
PERFORM print_paper.
Main Form which is called.
FORM print_paper.
Import Data ---Copied From SAP Program
PERFORM data_import. * This you have to copy from standard SAP program
*&-- Populate internal table for header part of form.
PERFORM data_population.
Your scrpit printing logic will be done in this.
*&--Script printing.
PERFORM main_print.               " Print the PAPER now
Do reward.
Thanks,
Madhura

Spool not generated in VL02n though output type is processed

Hello All,
I passed control parameters in function module WFMC_PREPARE_SMART_FORM.
So when i goto VL02n and process my output type , in further data if i give option 3 - send with application own transaction , the preview of the smartform is fine.
In further data if i give option 4, send when immediately saving application, and save my delivery document, spool should be generated. But if i check my spool requests, no spool is generated.. But the output type is processed(GREEN).
Please let me know your suggestions.
Regards,
Kausthub

Hello All,
I checked in SM58. It showed an error.
I checked my function module attributes. It was normal. Changed it to Remote enabled.
Now spool is generated.
Regards,
Kausthub

Problem with Output type NEU in PO

hI all,
I would like to have the possibility to send the PO document via mail.
Therefor I changed the smartform and the program as I did it for some other. I tested it and it works.
To do so, I've created a new output type ZNEU by copying the NEU output type.
I've created a new schema including my ZNEU output type in place of the standard NEU.
I inculded the schema I've created for output type ZNEU.
I did all the customizing in the NACE transaction, I've created the condition record for ZNEU in the transaction MN05 on the level 'document type', and also set the communication strategy.
But there is somethin missing, because by creating a PO, the system doesn't set the ZNEU message type in the PO automatically. Looking the protocol, it says that a valid output condition has been found but it is still not set in the PO.
Any idea ? I looking for this problem for hours...
thank you

It is a possibility that 'smartform' has formatting error and although it is going to the print program as guided by condition records..
But not assigning the output type with PO document
Can you please do two things:
1. Put a break-point in print program and see if control goes there or not
2. Test the output after adding it in manually in PO
Thanks.

Error with Output Type NEU - External Send

Hello Gurus,
I try to send Purchase Order by email, and I got this error message;
Access                    Message               Description
20                    540               Output not found
Access                    (complete)
Field in condition table                                               Field in document                          Value in doc.
Purchasing Doc. Type                                                Purchasing Doc. Type                           ZNB
Please, I really appreciate any help.
Regards,
Hector

Hi ,
Check if you miss any settings in the following steps,
Go to NACE
- Select EF and click on OUTPUT TYPES.
- Then select Output Type NEU and click on processing routines
- In that you have to add a new entry - medium 5
- Then you need to assign a program, form routine and form.
- You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
- Then in PARTNER FUNCTION you need to add a new entry: medium - 5 and function - VN
- For subject of the mail go to Mail Title and Texts. In title give PO No. &EKKO-EBELN &
- Under General data -> Replacement of text symbols give program as SAPMM06E and Form Routine as
TEXT_SYMBOL_REPLACE
- Now the subject will be PO No. xxxxxxxxx.
- You need to maintain your email id in tcode SU01 and also the vendor's email id. - Now while creating a new purchase order change the medium to External Send
- Then go to Communication Method and select CS01 ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN&
- Go to tcode ME9F
- Execute.
- Select the checkbox and click on Output Message.
- You will get a message MAII XXXXXXXXXXX generated
SAP NOTE FOR EMAILING PO :SAP note 191470
Regards,
Prabu

Associating process code with output type ?

How to associate a process code with an output type ?

How to associate a process code with an output type ?

Script Form print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL' "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
after checked, custom script from caused this issue, but how to resolve this problem?
best regards,

Hello,
The error ME142 can have different causes like missing authorizations
or a terminated connection. Please see SAP notes 397691 and 532251. This note
states that is errors occur when purchasing documents are output, If
errors occur when purchasing documents are output, the system generates
an error message in the message log of the message overview. However,
error message ME142 'Error in OPEN_FORM for document &' contains only
the information that an error occurred and not the error cause. With the
attached source code, the error cause is also displayed in the error
message.
Regards,
David

Need help with output type EDI for ERS

All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
Sandra

Hi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field                                       Value
Message type                         GSVERF
Partner type                             LI (vendor)
Partner function                        LF (vendor)
Port                                         SUBSYSTEM ( Port to your middleware)
Output mode                            such as Collect IDocs
Basic type                                GSVERF01
Application                                 MR
Output type                                ERS6 or the type you have defined
Regards,
Karuna

PO print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL' "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
how to resolve this problem?
best regards,
Edited by: colin hong on Nov 11, 2010 5:25 AM

Hi,
With the help of ABAP'r, please check the Custom Scriptform...
Also chk "http://help.sap.com/saphelp_nw70/helpdata/en/d6/0dba1a494511d182b70000e829fbfe/content.htm"
1. Re: difference between open_form & Start_form (urgent)
Regards
GK.

Configure Routine of VL02N with output type

Similar Messages

Maybe you are looking for