Configure SAP for server-side trust

Hi all,
I am installing BusinessObejcts XI integration for SAP Solution. I need configure SAP for server-side trust. I have read BussinessObjects XI Integration for SAP Solution Installation Guide. In chapter 6, It introduce how to configure SAP Server-Side trust. But I don't understand how to configure SAP for server-side trust, specially configure SAP Cryptographic. Would you please to give me more detailed explanation?
Please advise,
Duypm

Hi Duypm,
the SAP server side configuration is part of the Installation Guide Chapter 6. It starts on Page 94.
If you unclear about this and what SNC configuration means for the SAP server make sure you talk to the administrator for the SAP system. You need administrative rights for the SAP system and the system will have to be restarted as outlined in the installation guide
Ingo

Similar Messages

SAP SNC Server Side Trust Setup Problems

Single Server BOE instalation of BOE 3.1 SP4 to Windows 2008 R2 machine
Sap version 720 Patch level 7
We have used kbase article 1500150 and 1396213 to run thorugh the configuration and testing and all has checked out.
We are unable to have the "roles" returned when any "DN" value is entered in the SNC name entry in the entitlement systems tab.
We have turned on RFC tracing and have run the JCO test The RFC trace file is below followed by the JCO test information. JCO test was run twice, once with each DN just to make sure.
Please help
=======================RFC TRACE===========================
ERROR file opened at 20111116 174146 Eastern Standard Time, SAP-REL 720,0,93 RFC-VER 3 MT-SL
T:3988 Error in program 'CMS': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=torsbid01.cpr.ca, GWSERV=sapgw00, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       GSS-API(maj): No credentials were supplied
            GSS-API(min): No credentials found for this name (not logged
            on) (USER
            name="p:CN=BOEDEV, OU=BOBJ, O=CPR, C=CA"
TIME        Wed Nov 16 17:41:46 2011
RELEASE     720
COMPONENT   SNC (Secure Network Communication)
VERSION     5
RC          -4
MODULE      sncxxall.c
LINE        1439
DETAIL      SncPAcquireCred
SYSTEM CALL gss_acquire_cred
COUNTER     55
T:2800 Error in program 'CMS': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=torsbid01.cpr.ca, GWSERV=sapgw00, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       GSS-API(maj): No credentials were supplied
            GSS-API(min): No credentials found for this name (not logged
            on) (USER
            name="p:CN=BOEDEV, OU=BOBJ, O=CPR, C=CA"
TIME        Wed Nov 16 17:41:46 2011
RELEASE     720
COMPONENT   SNC (Secure Network Communication)
VERSION     5
RC          -4
MODULE      sncxxall.c
LINE        1439
DETAIL      SncPAcquireCred
SYSTEM CALL gss_acquire_cred
COUNTER     4
T:4760 Error in program 'CMS': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=torsbid01.cpr.ca, GWSERV=sapgw00, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       GSS-API(maj): No credentials were supplied
            GSS-API(min): No credentials found for this name (not logged
            on) (USER
            name="p:CN=BOEDEV, OU=BOBJ, O=CPR, C=CA"
TIME        Wed Nov 16 17:41:46 2011
RELEASE     720
COMPONENT   SNC (Secure Network Communication)
VERSION     5
RC          -4
MODULE      sncxxall.c
LINE        1439
DETAIL      SncPAcquireCred
SYSTEM CALL gss_acquire_cred
COUNTER     3
========================JCO TEST=======================
E:\BusinessObjects\javasdk\bin>java -classpath E:\BusinessObjects\Tomcat55\share
d\lib\sapjco.jar com.sap.mw.jco.support.JRfcTest
           SAP JCo Client Test             *
                 Possible SAP JCo-Tests
                  1. RFC_SYSTEM_INFO
                  2. CONNECTION
                  3. PERFORMANCE
                  4. INHOMOGENEOUS STRUCTURE/TABLE
                 15. TRANSACTIONAL RFC
                 99. Exit
               Your Choice....... :2
                      SAP JCo TEST - CONNECTION TEST
                      Send message and wait for ECHO/INFO
               CONNECTION PARAMETERS:
                 Server is R/2, R/3 or External (2/3/F/E): 3
                 Use load balancing (Y/N)Y...............: Y
                 R/3 system name.........................: BIN
                 Message server..........................: binmain
                 Selected group..........................: PUBLIC
                 Working with SNC (Y/N)N.................: N
               RFC-SPECIFIC PARAMETERS:
                 Working with ABAP debugger (Y/N)N.......: N
                 Use SAPGUI (Y/N)N.......................: N
                 RFC trace (Y/N)N........................: N
                 JCo trace level (0-10)..................: 0
               SAP LOGON DATA:
                 Client..................................: 000
                 UserID..................................: SAPCPIC
                 Password................................: XXXXXX
                 Language (E)............................: E
               #Calls of this JCo Test...................: 1
               Do You Want To Test With These Parameters (Y/N).. :N
               CONNECTION PARAMETERS:
                 Server is R/2, R/3 or External (2/3/F/E): [3] :3
                 Use load balancing (Y/N)Y...............: [Y] :N
                 Host name of an application server......: [binmain] :torsbid01.
cpr.ca
                 System number...........................: [53] :00
                 Working with SNC (Y/N)N.................: [N] :Y
                 SNC Library Name........................: [C:\Program Files\SEC
UDE\SECUDE for R3\secude.dll] :E:\SAP\Crypto\sapcrypto.dll
                 SNC name of partner program.............: [s:sample@hs0335] :p:
CN=BOEDEV, OU=BOBJ, O=CPR, C=CA
               RFC-SPECIFIC PARAMETERS:
                 Working with ABAP debugger (Y/N)N.......: [N] :N
                 Use SAPGUI (Y/N)N.......................: [N] :Y
                 Automatically invisible SAPGUI (Y/N)N...: [N] :Y
                 RFC trace (Y/N)N........................: [N] :Y
                 JCo trace level (0-10)..................: [0] :10
               SAP LOGON DATA:
                 Client..................................: [000] :200
                 UserID..................................: [SAPCPIC] :Crystal
                 Password................................: [******] :Welcome1
                 Language (E)............................: [E] :
               #Calls of this JCo Test...................: [1] :
               Do You Want To Test With These Parameters (Y/N).. :y
>>>>>>>>>>>>>>>> SAP JCo TEST - CONNECTION TEST >>>>>>>>>>>>>>>>
main [18:02:41:758]: [JAV-LAYER] INFO: JCo version is 2.1.10 (2011-05-10)
main [18:02:41:758]: [JAV-LAYER] JCO.setProperty("jco.trace_level", "10")
main [18:02:41:758]: [JNI-LAYER] RFC.nativeSetTraceLevel()                with r
c = RFC_OK   leave, [SUCCESS]
main [18:02:41:758]: [JAV-LAYER] JCO.setProperty("jco.trace_path", ".")
Stack trace of call to JCO.setProperty("jco.trace_path", ".")
        at com.sap.mw.jco.JCO.setProperty(JCO.java:554)
        at com.sap.mw.jco.JCO.setTracePath(JCO.java:791)
        at com.sap.mw.jco.support.JRfcTest.correctProperties(JRfcTest.java:1047)
        at com.sap.mw.jco.support.JRfcTest.initCall(JRfcTest.java:1074)
        at com.sap.mw.jco.support.JRfcTest.runConnectionTest(JRfcTest.java:737)
        at com.sap.mw.jco.support.JRfcTest.main(JRfcTest.java:203)
E:\BusinessObjects\javasdk\bin>java -classpath E:\BusinessObjects\Tomcat55\share
d\lib\sapjco.jar com.sap.mw.jco.support.JRfcTest
           SAP JCo Client Test             *
                 Possible SAP JCo-Tests
                  1. RFC_SYSTEM_INFO
                  2. CONNECTION
                  3. PERFORMANCE
                  4. INHOMOGENEOUS STRUCTURE/TABLE
                 15. TRANSACTIONAL RFC
                 99. Exit
               Your Choice....... :2
                      SAP JCo TEST - CONNECTION TEST
                      Send message and wait for ECHO/INFO
               CONNECTION PARAMETERS:
                 Server is R/2, R/3 or External (2/3/F/E): 3
                 Use load balancing (Y/N)Y...............: Y
                 R/3 system name.........................: BIN
                 Message server..........................: binmain
                 Selected group..........................: PUBLIC
                 Working with SNC (Y/N)N.................: N
               RFC-SPECIFIC PARAMETERS:
                 Working with ABAP debugger (Y/N)N.......: N
                 Use SAPGUI (Y/N)N.......................: N
                 RFC trace (Y/N)N........................: N
                 JCo trace level (0-10)..................: 0
               SAP LOGON DATA:
                 Client..................................: 000
                 UserID..................................: SAPCPIC
                 Password................................: XXXXXX
                 Language (E)............................: E
               #Calls of this JCo Test...................: 1
               Do You Want To Test With These Parameters (Y/N).. :n
               CONNECTION PARAMETERS:
                 Server is R/2, R/3 or External (2/3/F/E): [3] :3
                 Use load balancing (Y/N)Y...............: [Y] :N
                 Host name of an application server......: [binmain] :torsbid01.
cpr.ca
                 System number...........................: [53] :00
                 Working with SNC (Y/N)N.................: [N] :Y
                 SNC Library Name........................: [C:\Program Files\SEC
UDE\SECUDE for R3\secude.dll] :E:\SAP\Crypto\sapcrypto.dll
                 SNC name of partner program.............: [s:sample@hs0335] :p:
CN=BOEDEVSERVER, OU=BOBJ, O=CPR, C=CA
               RFC-SPECIFIC PARAMETERS:
                 Working with ABAP debugger (Y/N)N.......: [N] :N
                 Use SAPGUI (Y/N)N.......................: [N] :Y
                 Automatically invisible SAPGUI (Y/N)N...: [N] :Y
                 RFC trace (Y/N)N........................: [N] :Y
                 JCo trace level (0-10)..................: [0] :10
               SAP LOGON DATA:
                 Client..................................: [000] :200
                 UserID..................................: [SAPCPIC] :Crystal
                 Password................................: [******] :Welcome1
                 Language (E)............................: [E] :
               #Calls of this JCo Test...................: [1] :
               Do You Want To Test With These Parameters (Y/N).. :y
>>>>>>>>>>>>>>>> SAP JCo TEST - CONNECTION TEST >>>>>>>>>>>>>>>>
main [18:04:58:041]: [JAV-LAYER] INFO: JCo version is 2.1.10 (2011-05-10)
main [18:04:58:041]: [JAV-LAYER] JCO.setProperty("jco.trace_level", "10")
main [18:04:58:041]: [JNI-LAYER] RFC.nativeSetTraceLevel()                with r
c = RFC_OK   leave, [SUCCESS]
main [18:04:58:041]: [JAV-LAYER] JCO.setProperty("jco.trace_path", ".")
Stack trace of call to JCO.setProperty("jco.trace_path", ".")
        at com.sap.mw.jco.JCO.setProperty(JCO.java:554)
        at com.sap.mw.jco.JCO.setTracePath(JCO.java:791)
        at com.sap.mw.jco.support.JRfcTest.correctProperties(JRfcTest.java:1047)
        at com.sap.mw.jco.support.JRfcTest.initCall(JRfcTest.java:1074)
        at com.sap.mw.jco.support.JRfcTest.runConnectionTest(JRfcTest.java:737)
        at com.sap.mw.jco.support.JRfcTest.main(JRfcTest.java:203)
E:\BusinessObjects\javasdk\bin>
Edited by: Joseph Borojevic on Nov 17, 2011 12:07 AM

The error in the logs: u201CNo credentials found for this name (not logged on)u201Du201D usually is a problem with case.
We used the sapgenpse get_my_name command and found that the id being referenced was being pulled incorrectly with wrong case.
The problem was the ID we logged into the remote sesison into the windows server with.
That ID is the ID that the commands are run under.
The sapgenpse seclogin u2013p BOESERVER.pse command takes the ID of the user you are logged into the session with.
We re-ran the command when logged in with the user with the correct case and it worked

Scheduling web intelligence reports from SAP EP Portal : Server Side Trust

Hello,
We have set-up SSO between SAP EP 701, SAP BI 701 and Business Object XI 3.1 to allow users to access reports without having to sign-on again as explained here :
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
But, we have recently been contacted by some users because when scheduling Webi Report from a link within the portal they have the following errors :
u201CA database error occured. The database error text is: Unable to connect to SAP BW server System received an expired SSO ticket. (WIS 10901) u201D
The user told us that he doesn't encounter the error when :
Login in directly to the BO Infoview (without SSO from the SAP Enterprise Portal.)
The first Webi scheduling is succesful from the portal (I suppose because the portal token is still valid)
I understand that we also have to configure the Server Side Trust between BO Enterprise server and the SAP BI7 backend as explained here , but I do not really understand its purpose
https://websmp106.sap-ag.de/~sapidb/011000358700001646962008E/XI3-1_BIP_SAP_INSTALL_EN.pdf
I've found a similar discussions here ;
Issue with SAP Single Sign-On and Scheduling Reports
I still have some questions :
If we configure the Server Side Trust between BO Enterprise server and the SAP BI7 backend .
The Portal Logon ticket will remain an issue at some point of time , does it mean tha the WeBi report job sheduling should not be perfromed from the SAP EP Portal ?
We haven't configured the Server Side Trust , yet the users told us that they are able to schedule webi report directly from the BO Infoview ? How is it posible ?
Thank you in advance for your help.
Regards.

Thank you Mr Hilgefort for your detailled explanations.
I now have to provide some explanations to my managers, and to be honest , there are still some points that
are unclear to me, and it would be extremely helpful if could confirm (or not) the follwoing points.
When scheduing Webi report from the sap portal, we're getting SSO errors.
SAP provide the follwoing note explaining how to extend the validity of the J2EE token (Portal token), but this is not a long term solution, at certain point of time the ticket will expire. Webi shceduling should not be perfromed from the Portal.
Sap note 1352127 - Scheduled Webi report fails with: A database error occurred. The database error text is: Unable to connect to SAP BW server System received an expired SSO ticket
Webi Scheduling should be performed from BO Infoview. SNC should be configured between BO server and SAP BI7.0 backend.
We should Configure Server SNC as explained in the BusinessObjects XI Integration for SAP Solutions Installation and Administration Guide at Chapter "Configuring SAP for server-side trust". (1341043)
The SAP Portal is not involved here and is not an option even with the configuration of SNC/Server side trust.
thank you for your patience.
Best Regards.

Server Side Trust and Webi Report Scheduling via Portal

Hello,
I have opened a similar thread about Server Side Trust and webintelligence reporting through the portal a few months ago.
At the time, we had some complaints about users that were getting SSO errors after 8 hours when scheduling WeBi Report through the SAP Portal.
Basically, the users connect to the Portal and then FROM the Portal, to a BOI view pointing to the Infoview.
Then, after investigatinon, it was my understanding that the WebI Reports should be scheduled through an Infoview token and not a portal token. In concrete terms Server Side Trust had to be implemented between the SAP BW Backend and the BOE 3.1 Server.
And after that the users who wanted to schedule WebI reports should connect to the Infoview directly (using their SAP BW credentials) to generate an Infoview Token.
Scheduling Webi reports from the Portal will not be solved by implementing Server Side Trust, since it is only a matter of time before the the Portal token expires ( 8 hour by default).
Now, I have configured the server side Trust between our BOE 3.1 SP2 and our BW 701 system, SNC configuration, PSE generation, exchange of certificats , etc ...
I did some scheduling tests connecting directly to the BO Infoview and it works.
But of course, now I am being told by the users that this solution is not acceptable.
The Portal being the entry point of our Infrastructure, they don't want to connect to the Infoview to schedule their reports.
So I opened a SAP customer call to try to have an official and clear statement from SAP but I never obtained it.
I had a look at my SAP BO courses but I am still confused
For example according to SAP BO100 , server side trust should be implemented when ;
"BOE client session authenticated using Single sign on using SAP token
(Enterprise Portal) and SAP reports are being scheduled at a future point in
time (after token expiry date)."
Anyone can help me to clear my mind ?
Thank you
Best Regards

Hi,
first of all lets separate the UI portion from the technical portion.
on the technical side:
yes for scheduling the Web Intelligence document you will need Server side trust
on the UI side:
- scheduling is part of InfoView
- scheduling is part of the KM integration with the portal
if that is not accepted from a UI point of view from the user you can create your own application to schedule documents using the SDK.
ingo

SNC server side trust based on kerberos - is it possible ?

Hi all,
We're trying to make this scenario work:
Existing SAP system uses ntlm sso in the sapgui.
We're now in the process of deploying BOE in the company.
We're using sso with winad to infoview which works
We're trying to configure server side trust between SAP and BOE due to requirement of 'multipass burst' functionality
This causes a conflict between sso in the gui and the dll used for setting up SNC server side trust.
I've tried to figure out how to use the kerberos dll gx64krb5.dll on the SAP server to enable both sso solution in gui and server side trust between SAP and BOE, but I cannot generate the SNC PSE in the SAP trust manager.
I've not been able to find threads/info in sap notes on how to set SNC PSE using kerberos dll - is it possible.
Can we have both sapgui sso to SAP and server side trust bewteen SAP and BOE ?
TIA.
Torben

Dear Torben and Ingo,
For your question: "Can we have both sapgui sso to SAP and server side trust bewteen SAP and BOE ?"
Have you done implementing those? Because we already have client SNC (between SAP GUI and SAP BW) using Kerberos SSP (since SAP Crypto can only be used for Server SNC).
And now we're going to implement server SNC (between SAP BW and BOE) using SAP Crypto.
Is it possible to have these 2 together? Because some of the settings in RZ10 will overlap between the two like below. And if we continue with server side trust between SAP BW and BOE, settings for Client SNC will need to be overwritten and it will stop working.
1. RZ10 setting
Kerberos SSP (between SAP GUI and SAP BW)
snc/gssapi_lib = D:\usr\sap\gx64krb5.dll
snc/identity/as = p:SAPServiceSID(at)myorgunit.myorg.mycountry
SAP Crypto (between SAP BW and BOE)
snc/gssapi_lib = $(DIR_INSTANCE)\exe\sapcrypto.dll
snc/identity/as = p: CN: mybwserver, OU: myorgunit, O: myorg, C: mycountry
2.
And also with client SNC using Kerberos SSP we need to tag each user in SU01 with SNC name, whereas this is not needed for server SNC. If i leave this SNC name on each BW user, will that make my server SNC between BW and BOE not working?
3.
Overlap in location of file named "ticket" between SAP
Crypto and Kerberos SSP, which is to be copied to the same location
below:
<DRIVE>:\usr\sap\<SID>\<instance>\sec\ directory (on
Windows).
4.
Overlap in environment variable named SECUDIR that points to the
directory where the ticket resides.
Is there any documentations that explain how to get these 2 SSO to run together?
Thank you very much.
Kind regards,
aswin
Edited by: Aswin Setyawan Margono on Jan 5, 2011 7:15 AM
Edited by: Aswin Setyawan Margono on Jan 5, 2011 7:18 AM

Server-side Trust with CryptoLib &/or 3rd party tool

I have a new installtion:
> BOE XI 3.1 SP2 (Solaris)
> SAP Integration Kit
Intend to enable server-side trust / SNC betw BOE and BW.
Separately, BASIS just installed/config'd new standard tool (Quest's Vintela) on BW for SSO from SAP GUI clients to BW. I notice some parms (such as snc/gssapi_lib) now are configured to Quest/Vintela libraries on BW.
Possible to have both Vintela and CryptoLib co-exist/co-active on BW? ... or is best approach (even forced / only approach) is to standardize on one? ... likely install Vintela on BOE and use Vintela for BOE-to-BW SNC?
thx, Clay

Hi Clay,
I believe you're right, that they can't co-exist for use as SNC libraries. I really don't have a complete understanding of how this all works, but I believe they can co-exist if the sapcrytolib is used for RFC that is not using SNC. Maybe someone else can confirm, deny, or expand on that?
Even though we (Quest) donu2019t always know the exact configuration options for each application that supports SNC, as a certified SNC interface it should always be possible to get things working in a fully supported manner. If you would like to work with me on this directly I would be happy to help. You can find my e-mail address under my business card.
Thanks!
Kyle

Problem with skin for server side buttons.

Hi,
I have a problem with the skin for server side renderd buttons.
In my CSS file I have :
.AFButtonStartIcon:alias
content:url(/skins/images/btns.JPG);
.AFButtonEndIcon:alias
content:url(/skins/images/btne.JPG);
.AFButtonTopBackgroundIcon:alias
content:url(/skins/images/btntb.JPG);
.AFButtonBottomBackgroundIcon:alias
content:url(/skins/images/btnbb.JPG);
JPG files in project are in dir "public_html/skins/images".
In WAR file,the JPG files are in "/skins/images" directory.
Skin configuration is correct because other settings from CSS
file are functioning fine after deploying.
But buttons are standard browser buttons and are not taking the images i have used.
In document provided by Oracle it says:
(Note: These icons must be specified using either context-image or
resource-image icons. Text-based icons are not allowed.)
I am nt able to understand what this means?

Perhaps this thread will help.
JSF Skining Button Images
The doc should say whether or not the width/height is a requirement. But since it doesn't mention it, try adding a width and height.
- Jeanne

Unable to use RAS SDK for server-side printing for XI 3.1

Hi all,
I am using RAS SDK for server-side printing. Here are my codes:
ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();
IEnterpriseSession enterpriseSession = sessionMgr.logon("Administrator", "", "cdi5boe", "secEnterprise");
IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
//out.println("Current User is = " + enterpriseSession.getUserInfo().getUserName());
//out.println ("<br>");
IInfoObjects infoObjects = iStore.query("SELECT * FROM CI_INFOOBJECTS WHERE SI_Kind='CrystalReport' AND SI_NAME = 'Sales Print'");
IInfoObject infoObject = (IInfoObject)infoObjects.get(0);
IReportAppFactory reportAppFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
ReportClientDocument rcd = new ReportClientDocument();
rcd = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
//Create print options to use when printing.
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("
cdi5boe
HPLaserJ");
printOptions.setJobTitle("Test Printer Job");
printOptions.setPrinterDuplex(PrinterDuplex.horizontal);
printOptions.setPaperSource(PaperSource.auto);
printOptions.setPaperSize(PaperSize.paperLetter);
printOptions.setNumberOfCopies(1);
printOptions.setCollated(false);
PrintReportOptions.PageRange printPageRange = new PrintReportOptions.PageRange(1,1);
printOptions.addPrinterPageRange(printPageRange);
//Print report.
rcd.getPrintOutputController().printReport(printOptions);
When I run the report, I got the following errors:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKPrinterException: com.businessobjects.crystalreports.printer.bean.ReportPrinter---- Error code:-2147215357 Error code name:internal
I consult the Diamond Technical Community and I found the issue related to printer name:
https://boc.sdn.sap.com/node/498
However, I did check the printer name, it is accessible via Windows Explorer.
Anyone knows how to resolve this?
Regards,
Derek

It doesn't appear to be listed as a dependency in the developer docs, but would you try putting the ReportPrinter.jar in your RAS app?
Sincerely,
Ted Ueda

Server Side Trust - Server Group

Hi,
One of the steps to create publications / server side trust (as per SAP Press BO and BW Integ book) is to create a Server Group and add certain services to it. It says that the Destination and Publication Job Server should be added. I dont have them - will that be a problem?
Thanks

Hi,
They dont seem to exist so I am guessing I will have to create them myself?
Could you or someone please confirm that the following selections should be made when creating the servers:
DESTINATION JOB SERVER - Service Category: Core Services, Service: Destination Delivery Scheduling Service
PUBLICATION JOB SERVER - Service Category: Core Services, Service: Publication Scheduling Service
Also, do I need to include any of the additional services when creating the servers?
Many Thanks
Edited by: Leo on Apr 20, 2011 10:03 AM

Can i use same Server for server side and client??

Hi,
i m developing webservices in java and using two different server for server side and client.
e.g. i m using one tomcat server on a machine to run webservice and again using one more tomcat server on client side at different machine.
and hence it need two tomcat server.
But i want only one server to run webservice and client.
So please help me out...
Thanks

Hi,
It is always recommended to maintain different servers
REgards,
Ravi.

Does Weblogic Provides any in built utility for server side browser detection

          Hi
          Does Weblogic Provides any in built utility or package for server side browser
          detection i.e. to know the browser details
          of the client with the first request.
          One such available product is BrowserHawk(http://www.cyscape.com).
          any thing similar to this available?
          Thanks in advance
          Mrutyunjay


Hey Mohammed,
          yes, you could use just wl server to do file uploading. in your html client
          code, you need to specify the type of the data that you are sending as
          follows:
          <form action="UploadTestServlet" enctype="multipart/form-data" method=POST>
          File: <input type=file name=file><br>
          <input type=submit>
          </form>
          This will send your file to be processed by the UploadTestServlet. You need to
          code UploadTestServlet yourself to parse and extract useful data. check out
          www.servlets.com for a utility class that does just that
          Winston
          Mohammed Ali Usmani wrote:
          > Hi to All;
          >
          > I want to know if I can use weblogic (webserver) for file uploading from
          > client browser without using any ftp server.
          > Do I have to use some special code (may be in my servlet/html page) for
          > handling this. I mean that do I have to provide the implementation of RFC
          > 1867 by myself at server side?
          >
          > Or it is just merly a browser support? It doesn't effect the webserver at
          > all?
          >
          > Thanks

Problem configuring SAP AS server in NWDS 7.1 SP03

Hi everyone,
I'm having trouble in configuring SAP AS in Developer Studio 7.1 SP03.
In SP01 I have no problem, but in SP03 an error shows up, which says that the host and instance number are not available. In SP01 there's a field for the port, but in SP03 theres only fields for host and instance number.
Thanks in advance for your advice.
Cheers

Hi Atul,
Thank you for your answer.
I have tried this and a message error comes saying that server is not reachable.
However, if I configure SP01 with the same server, it shows no error and I can see the server is up and
running. Is there a special configuration for SP03? Im I missing something, weather on the server side or
on de Dev Studio side?
Thanks in advance.
Cheers.
Reynod
Edited by: Reynod Maldonado on Feb 15, 2008 8:28 PM

How to configure ODI for server and client correct?

Hi forum,
this is my first post and i hope you guys can help me out ...
i
am new to ODI and WLS and in my case ODI need to run on a server where a couple of clients can connect to, work on the same project with their own workspaces and accounts.
The database will be located on the same server.
As far as i understood, i need to install the the ODI Java EE type (not the standalone type) with a WLS ?!
iI already nstalled
JDK 6u41 (x64),
ODI 11g (11.1.1.6, generic),
Oracle DB 11g R2 enterprise and
WebLogic 11g (10.3.6, generic)
on the Server and now i am trying to connect to the ODI repositories from a client with an ODI standalone installation.
I am now trying to insert a Data Source into the physical agemt (not even sure if i need to do this in my case).
Following these instructions (http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/setup_topology.htm#CHDHJBAD) i get an ODI-26029 error.
Below are some configuration information of the software i installed.
h3. ODI
Installation:
Installationtype: full
Oracle home directory: Oracle_ODI1
Agent name: odi_agent
Agent port: 1987
Repositories/connection:
Master repository user = odim
Work repository user = odiw
Work repository name = WORKREP1
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
*odim and odiw have been created manually with grant options on connect and resource
Physical agent (with no datasource defined):
Name = OracleDIAgent
Host = localhost
Webapplicationcontext = oraclediagent
Port = 8001
Protocol = http
Physical data server:
Name = oracle_db_11gr2
User = odiw
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
Physical schema:
Schema (schema) = ODIW
Schema (work schema) = ODIW
Context = aMIS_dev
Logical schema = oracle_db_11gr2
Logiacal schema
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Context:
Name = aMIS_dev
Logical agent = OracleDIAgent
Physical agent = OracleDIAgent
Logical schema = oracle_db_11gr2
Physical schema = oracle_db_11gr2.ODIW
Logical schema:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Logical agent
Name = OracleDIAgent
Context = aMIS_dev
Physical Agent = OracleDIAgent
h3. Oracle DB 11g R2
Installation
Global database name = orcl.otera.local
SID = orcl
h3. WebLogic 11g:
+1. generate new basic WebLogic Server domain+
Domainname = ODI-DOMAIN
Admin name = weblogic
Admin server name = AdminServer
Listening port = 7001
Managed server name = odi_server1
Managed server port = 8001
+2. extend an existing WebLogic domain+
Choose extension source: ODI - Agent, ODI - Agent Libraries, Oracle JRF
Window: Configure JDBC compontent schema:
Driver = Oracle's Driver (Thin) for Instance connection; Versions: 9.0.1 and higher
Schema owner = odim
DBMS/Service = orcl
Hostname = localhost
Port = 1521
Client name = LocalODIMachine
Listening address of the accountmanager = localhost
Listening port of the accountmanager = 5556
Really hope you guys can help me quick.
Thanks in advance

Hi DecaXD,
thank you for quick response :)
on the client site i tried to establish the connection to the work repository with the following connection information:
Login information*:
Oracle Data Integrator Connection
Login name = odi_server
User = SUPERVISOR
Database connection (Master Repository):
User = odim
URL = jdbc:oracle:thin:@<server ip>:1521:orcl
A work repository could be found, but the connection failed! (?!)
" ODI-26130: Connection to the repository failed.
oracle.odi.core.config.NotWorkRepositorySchemaException: ODI-10147: Repository type mismatches.
Could not get JDBC Connection; nested exception is java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Invalid SQL-Query for validating the connection (+translated from german into english+) "
my ODI configuration on the server site (loged in as: odiw):
topology tab*:
Physical architecture:
Technology:
Definition:
Dataserver name = oracle_db_11gr2
User = odiw
JDBC-URL = jdbc:oracle:thin:@10.168.178.131:1521:orcl
Datasource:
Agent = OracleDIAgent
JNDI-Name = [DataSourceName]
Agents:
Definition:
Name = OracleDIAgent
Host = <IP of the server>
Port = 8001
Webapplicationcontext = oraclediagent
Datasources:
Dataserver = oracle_db_11gr2
JNDI-Name = [DataSourceName]
Logical architecture:
Technology:
Defintion:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Agent:
Name = OracleDIAgent
Context = aMIS_dev
Physical agent = OracleDIAgent
when i test the connection of the data server (topology>physical architecture>technology>oracle>oracle_db_11gr2) with the OracleDIAgent i receive the
" ODI-26039: Connection failed.
oracle.odi.runtime.agent.invocation.InvocationException: javax.naming.NameNotFoundException: Unable to resolve '[DataSourceName]'. Resolved ''; remaining name '[DataSourceName]' "
since testing the connection on the server site failed in first place, i couldn't test the connection on the client site.

Configuring SAP BI server in Lumira Preferences to support SSL

Hello all ,
We are currently on SAP BI 4.1 SP 5 FP 3 and we have installed the latest version of SAP Lumira .
We have also implimented SSL for secured login to BI launch pad ,CMC -etc .
Is it possible to configure the SAP BI server URL in Lumira preferences to supports https based URL ?
The default URL looks like - http://<server name>:6405/biprws
If possible then please assist me to identify where and what I need to configure . We are currently on Windows environment .
regards,
Sourav Roy

Have a look at this, although it talks about Team Server, it will be applicable to the BI system.
Note that without the BI add-on, you will only be able to use the platform for viewing, just file storage.
http://scn.sap.com/community/lumira/blog/2015/02/23/configuring-ssl-for-sap-lumira-edge-server
To take advantage of full lumira integration, see this blog Planned Native Integration of Lumira into BI Pl... | SCN

Contribute changing relative path for server-side include

I am using Contribute CS3, version 4.1, and my pages crash
every time a send a draft for review, because Contribute is
rewriting a relative URL in a server-side include.
The server-side include (before I send for review) reads:

After I edit other portions of the page and send the draft
for review, it reads:

Which results in the draft being unreadable.
Is there any way to tell Contribute not to monkey with this
URL? I have hunted, read the forums, checked the knowledge base,
and coming up empy.
Thanks in advance for any help you can provide!! I really
appreciate it!
-Nicholas

Answering my own question.
I researched this complete forum and with taking ideas from
different posts, I was able to figure this out. I thought I would
post it for anyone else needing to know the answer in one place:
Include tags must read:

(Include file is NOT a real HTML doc -- no tags in file
except for CSS, as it would be used if not using Contribute.)
No reference to .dwt needed nor Template created.
No Edit instance tags needed anywhere.
Contribute user navigates to page:
[Upper right corner] Click Choose...
[In my structure] User opens includes folder (double clicks)
User selects THE file (clicks OK)
User clicks on Edit Page button
(Text is now editable.)
User edits text.
User clicks on Publish button.
Worked for me several times trying.
- Janet

Configure SAP for server-side trust

Similar Messages

Maybe you are looking for