Configure sap library-online documentation in EHP4 system

Hi,
   How to configure SAP Library - Online Documentation on (EHP4 systesm) OS level.
Thanku

Via SR13 as in any other version... read the documentation.
Regards
Juan

Similar Messages

  • Want to configure SAP Library

    Hi  Experts,
    I want to configure SAP Library  I had downloaded Library files too, one is of CHM and other one is of HTML. I wanted this file to be available in my SAP Library OFFLINE on server insted of online, so the persone who is not using internet in my LAN can also be able to access those files. So please help me to configure this CHM files.
    Regards,
    Prashant Chauhan

    hi prashanth,
    1. Create folder for the installation, e.g. G:\documentation.
    2. Start sapinst.exe from the installation master DVD or from ur dump.
    3. In SAPinst you have to give the language folder on the Documentation DVD,
    e.g. G:\ADM110_62A\Installation Media (DVDs)\SAP ECC 6.04\SAP ECC60
    SP14 Documentation\HTMLHELP\EN.
    4. Wait some minutes until the installation has finished and close SAPinst.
    5. Now you can open the SAP Library by double clicking on <local
    folder>\HTMLHELP\<Language>\00000001.chm.
    this might help you
    thanks and regards,
    santosh.

  • How can I configure SAP Library

    Dear Experts,
    I would like to configure SAP Library OFFLINE on my server can somebody guide me step-by-step.
    Regards,
    Prashant Chauhan

    > Hi Reiner,
    > Thank you very much for response, this is helpful
    > information.
    If you consider an answer as helpfull, please mark it with the button on the left side :-).
    > My options are pretty much limited,
    > I can't use NTLM since, AIX will not accept trust
    > -- NTLM Auth will not work with AIX
    > -- Kerberos auth have to have third party tool like
    > CyberSafe for SNC trust relationship.
    As I wrote, you can use any SNC provider. Especially Secude would be interesting, as it is available on all platforms.
    > I planning to try using SSO as mentioned in "Enabling
    > Single Sign-On for ASP.NET Applications in Enterprise
    > Portal 6"
    > Is this approach works with EP 5.0?
    This is a completely different approach: In the stuff I was writing to you before I was assuming that IIS would do the authentication. The other approach is that SAP Portal does it. This also works - EP 5.0 should be fine - but it works completely different. E.g. you doesn't need a trusted connection for SSO with MYSAPSSO2 ticket.
    > If any one has "sapsecu.dll" please send me at
    > [email protected] with same size as stated in
    > this document.
    This DLL is not allowed to be exported into some countries because it contains strong cryptography. You usually get it via your local SAP subsiduary.
    > My SSO ticket did not get created after following
    > steps in document, I am suspecting either sapsecu.dll
    > or veryfy.pse is wrong?
    Did you find a MYSAPSSO2 cookie in the request?

  • How to import the SAP library into the XI / PI

    Dear All
    Thank you for your help and support
    I am not able to get any help from the Help Menu. I think SAP library is not installed in my system
    Is there any way to install the SAP library.. or does anyone has link to download the SAP library and install in my system
    Regards
    Blue

    Can i download the sap xi library to my pc
    refer that thread

  • Installing SAP online documentation and integrating with SAP.

    bold Dear all
    I am trying to integrate SAP library with CRM server.
    I have followed the steps mentioned in the Online documentation CD ( Read me and online
    documentation PDF fils).
    I am trying to install HTMTHelp library.
    I have followed the following steps :
    1.  Copy the directory Htmlhelp\Helpdata\<language key> with all its subdirectories
         from the DVD to the documentation directory on the server.
    Later defined the setup variants.
    1 . T.code SR13
    2 . select the HtmlHelpFile tab page.
    Switched to the change mode and entered the following details :
    Variant = saphelp
    platform = windowsNT
    Area     = IWBHELP
    Path      = c:\sapdcoument\HTMLHelp
    Language = EN
    Defaul = enable
    I have saved the changes and it asked me to create the change request.
    i have made these changes in the client 000 ***
    When i click on the Help -> Application help or SAP library under the help menu
    it is giving me the error " No Documentation available ".
    Could some one help me with this.
    Regards
    Kiran

    Dogboy49
    I have shared the helpdirectory which is located on the server and
    it is accessible in the network from all the PC ( frontend ).
    But when i try to accesss it is throughing an error and when i look
    in the SAPDOCCD log file located in the Windows directory i find this error.
    I am posting the SAPDOCCD file. kindly suggest if you have any solution
    Program path =     C:\Program Files\SAP\FrontEnd\sapgui\HTMLHELP\SHH.EXE
    SHH version  =     7.1.0.4
    Command line =     
    "TYPE=5&SERVER=&PATH=
    idescrm\SAP\CRM\HELPDATA\EN\EN&SYSTEM=CRM&_CLASS=IWB_STRUCT&_LOIO=
    &_SLOIO=e18e51341a06084de10000009b38f83b&LANGUAGE=EN&RELEASE=500&IWB_COUNTRY=&IWB_INDUSTR
    Y=BBPCRM&_SCLASS=IWB_STRUCT&FRAME=X"
    Info:          --- Default settings from command line ---
    Info:          HelpType=HtmlHelpFile
    Info:          HtmlHelpFilePath=
    idescrm\SAP\CRM\HELPDATA\EN\EN
    Info:          --- Contents of profile "C:/WINDOWS/sapdoccd.ini" ---
    Info:          Could not read profile "C:/WINDOWS/sapdoccd.ini"
    Info:          --- Contents of profile "C:/Program
    Files/SAP/FrontEnd/sapgui/sapdoccd.ini" ---
    Info:          Could not read profile "C:/Program
    Files/SAP/FrontEnd/sapgui/sapdoccd.ini"
    Info:          --- Contents of profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini" ---
    Info:          Could not read profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini"
    Warning:     Could not read any profile
    Info:          --- Starting HtmlHelp ---
    Info:          CHM file="
    idescrm\SAP\CRM\HELPDATA\EN\EN\e18e5134\1a06084d\e1000000
    \9b38f83b\frameset.chm"
    Info:          HTM file=""
    Error:          Could not find file "
    idescrm\SAP\CRM\HELPDATA\EN\EN\e18e5134
    \1a06084d\e1000000\9b38f83b\frameset.chm" *
    Regards
    KiranKumar
    Edited by: kiran kumar on Feb 25, 2008 7:40 AM

  • Trying to load SAP online documentation to SAP GUI

    Hi -
    I'm trying to load the SAP online documentation to the front end. I've put the "htmlhelp\helpdata\en" directory and sub-directories on our server. I've then go in and execute SR13 and have entered the following for the HTMLHELPFILE tab:
    Variant : HTML Help
    Platform: WN32
    AREA: IWBTRAIN
    Path:
    zeus\public\documents
    Language: EN
    Default: <checked>
    But, when I go to the help dropdown and choose SAP Library I get the following:
    No documentation available
    Message no. SH720
    Diagnosis
    Online documentation is not currently available.
    Any ideas what I am doing wrong?
    Thanks.

    Update your Flash from Adobe's website.   If that doesn't work, tell the webmaster they aren't using a portable version of Flash that is as compatible with as many browsers as possible.
    Please don't use all uppercase.  In internet etiquette it means you are shouting.

  • How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

    Hello all,
    I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
    1. Install SAP DB using installation MAXDB CDs
    2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
    3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
    4. configure in LC10, tcode.
    but when i press on livecache monitoring in LC10 it gives me following error.
    Command: DBMRFC
    Parameter: -gsapfive -xsapgw00
    SY-SUBRC: 8
    Return Code
    sap maxdb client

    i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
    Test Scope
    1. Execute an external operating system command (DBMCLI)
    2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
    3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
    4. Test the SQL connection (Native SQL at CON_NAME)
    Application Server:  <hostname>_<SID>_00                           ( Windows NT )
    1. Connect. test with "dbmcli db_state"                         Successful
    2. Connect. test with command mode "dbmrfc db_state"            Successful
    3. Connect. test with session mode "dbmrfc db_state"            Successful
    4. Connect. test with "native SQL"  ( LCA )                     No connection
       SQL Code: 4008
        POS(1) Unknown user name/password combination
       For detailed information, see the developer trace for work process:            1
    please see trace from file dev_rfc and dev_w0 below
    log for dev_rfc
    **** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
    ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered                                      
    ABAP Programm: SAPLARFC (Transaction: )
    User: MKUMAR (Client: 800)
    Destination: IDOCTEST (handle: 2, , )
    SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
    SERVER> Caller host:
    SERVER> Caller transaction code:  (Caller Program: SAPLQOWK)
    SERVER> Called function module: ARFC_RUN_NOWAIT
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered                                      
    DEST =IDOCTEST
    HOST =%%RFCSERVER%%
    PROG =IDOCTEST
    Log from dev_w0
    A  RFC 1485  CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
    trace from file dev_rfc is below
    **** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
    ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered                                      
    ABAP Programm: SAPLARFC (Transaction: )
    User: ABC (Client: 800)
    Destination: IDOCTEST (handle: 2, , )
    SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
    SERVER> Caller host:
    SERVER> Caller transaction code:  (Caller Program: SAPLQOWK)
    SERVER> Called function module: ARFC_RUN_NOWAIT
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered                                      
    DEST =IDOCTEST
    HOST =%%RFCSERVER%%
    PROG =IDOCTEST
    A  RFC 1485  CONVID 47150684
    A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
    A  RFC> ABAP Programm: SAPLARFC (Transaction: )
    A  RFC> User: abc (Client: 800)
    A  RFC> Destination: IDOCTEST (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SAPLQOWK)
    A  RFC SERVER> Called function module: ARFC_RUN_NOWAIT
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Gateway on host <HOSTNAME> / sapgw00
    M  *  ERROR       program IDOCTEST not registered
    M  *
    M  *  TIME        Fri Jan 07 18:15:25 2011
    M  *  RELEASE     701
    M  *  COMPONENT   SAP-Gateway
    M  *  VERSION     2
    M  *  RC          679
    M  *  MODULE      gwr3cpic.c
    M  *  LINE        1778
    M  *  DETAIL      TP IDOCTEST not registered
    M  *  COUNTER     715
    M  *
    M  *****************************************************************************
    M 
    A  RFC 1485  CONVID 47152747
    A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
    A  RFC> ABAP Programm: SAPLARFC (Transaction: )
    A  RFC> User: ABC (Client: 800)
    A  RFC> Destination: IDOCTEST (handle: 2, , )
    A  RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code:  (Caller Program: SAPLQOWK)
    A  RFC SERVER> Called function module: ARFC_RUN_NOWAIT
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    Mani

  • Configuration SAP EP systems in HTTPS and SSL

    Hi,
    Can anyone tell me the regarding the configuration SAP EP systems in HTTPS and SSL.
    The scenario is  Client -->Application gateway( Web Dispatcher) -->EP6
    Regards,
    Moulinath Ray

    Hi,
    I am giving to you the steps we do for our securization (EP 7.0):
    Prerequisites:
    -Download SAP Cryptographic ToolKit at http://service.sap.com/ swdc and -> SAP Crypto-graphic Software -> SAP JAVA CryptoToolkit (J2EE Engine as of Release 6.30)
    -Unzip it with SAPCAR
    Logon in SDM and deploy the file
    Check in Visual Admin -> Dispatcher/Server -> Libraries -> core_libs iaik_jce.jar is included
    Loof for SSL Service in Config Tool in Server and Dispatcher, it should be "always"
    Steps:
    -Asking for a certificate
    Visual Admin -> Cluster -> Server (central instance ) -> Services -> Key storage -> Service_ssl -> Create
    Fill in all the data, and be careful with the common name:
    -It shouldn´t have "http" or "https" on it
    -It shouldn´t have port number on it
    For example: "https
    www.myportal.domain:port", the common name should be "www.myportal.domain"
    Visual Admin -> Key Storage -> service_ssl -> Select your certificate and u201CGenerate CSR Requestu201D
    Send the file to a CA
    -Importing the validated certificate:
    Visual Admin -> Key Storage -> Import CSR Response
    In each Server, under SSL Provider, assign the certificate to port 50001, in each Dispatcher
    Now, the portal is secure, and you can check it now.
    A last step would be export the certificate and send it to your Network Team, so they can export it in the load balancing server, reverse proxy, etc.
    You can have a look at this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
    Some of the threads link:
    /message/5568001#5568001
    /thread/853387
    Regards,
    Niraj
    Edited by: Niraj Kumar on Jan 22, 2009 3:59 PM

  • EHP4 System copy of the existing SAP system

    Hi!
    In order to refresh our SAP ERP system with EHP4 we would like to execute a system copy of the existing SAP EHP4 system.
    This system should be installed on the existing server.
    Question:
    Which parts of the software (SAP, Oracle) do I need to delete before or can I rewrite the existing system with the exported EHP4 system?
    Any helpful information will be very appreciated!

    Hi!
    Many thanks for your reply.
    > 1. install MCOD
    > 2. Drop database and recreate
    The second option means the existing system/database will be rewritten by the new database.
    I have a double stack system (ABAP + Java Stack, including Portal)
    Question
    Does this option (Drop database and recreate) suit in my case (SAP system with double stack) or should delete old SAP system before installing the new one with SAPINST via system import?

  • SAP Library Documentation.

    Hi Experts,
    Greeting from Guru. I am a new bie to SAP-ABAP. I am learning ABAP myself. I just need your help to get the SAP Library documentation to proceed my self study.
    So can any one please send me the SAP Library to my mail ID - [email protected]
    Any help will be appreciated.
    Thanks,
    Guru.

    Hi,
       refer ABAP Library:
    http://help.sap.com/saphelp_46c/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    Following are some links which will help you to cover above points.
    http://www.sap-img.com/F
    http://www.sappoint.com/abap.html
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/ranges.htm
    http://www.sapdevelopment.co.uk/programs/programsalv.htm
    http://www.geocities.com/victorav15/sapr3/abapfun.html
    http://abap4.tripod.com/SAP_Functions.html
    http://sapr3.tripod.com/abap011.htm
    http://abap4.tripod.com/Other_Useful_Tips.html
    http://www.sap-img.com/abap/how-to-change-the-development-class.htm
    Check
    http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm
    this is the link for 21 days.
    http://www.is-edu.hcmuns.edu.vn/WebLib/Books/Database/0-672-31217-4/index.htm
    Regards

  • Configuring SAP R/3 system as data source for SAP BW3.5 system

    HI All,
    Please help me in getting some document for integrating SAP R/3 4.7 with SAP BW3.5 as data source system.
    Thanks in advance.
    Regards,
    Nalla.

    Hi,
    I have got the link which has solution for my question from old questions in this Forum.
    http://help.sap.com/saphelp_nw04/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
    So stopping this thread.
    Regards,
    Nalla.

  • Sap library help

    Hi,
       To install sap library help on my development server.my development server on linux and maxdb.
    how i have to set the path.
    thanku

    Hello,
    You can put the help files on a windows server or a windows system on the same network and configure the online help documentation as shown below:
    In Transaction SR13
    a) Go to the Tab "HTMLHELPFILE"
    b) Click the "New Entries" Button
    c) Type the following input in the respective fields as given below.
    variant: SAPHELP
    Platform:
    : WN32
    Area: IWBHELP
    Path:
    SERVER_NAME\Software\SAPHelp\HTMLHELP\HELPDATA
    Language: EN
    Default: Click the check Button
    Then click "SAVE" Button . This will prompt for change request which you can
    transport it to Quality and Production System.
    Hope this helps..
    Regards,
    Jazz

  • Unable to Define SAP Library in SR13

    Hi gurus, I have installed ECC6 with EHP3 in windows servers 2003. All the front end users are using Windows XP. So i want to install the HTMLHelpFIle. So i have copied the Sap Library DVD into the server. Then i go to SR 13 and setup the variant. But when i try to access it's say the path was not found. Please Help me through on this. Thank you.
    Varian Detail in SR13. Please verify if i entered the variants correctly.
    Variant : Sap Library
    Platform :win32
    Area      :IWBHELP
    Path      :
    193.169.1.136\Sap_Library\HTMLHELP\EHP3
    Default : Enabled
    It seems the path is not correct but i dont know how to define a correct path. The sap Library file in copied into C drive.
    Program path =     C:\Program Files (x86)\SAP\FrontEnd\sapgui\HTMLHELP\SHH.EXE
    SHH version  =     7.1.0.5
    Command line =     "TYPE=5&SERVER=&PATH=
    193.169.1.136\Sap_Library\HTMLHELP\EHP4\EN&SYSTEM=ITD&_CLASS=IWB_STRUCT&_LOIO=&_SLOIO=e18e51341a06084de10000009b38f83b&LANGUAGE=EN&RELEASE=603&IWB_COUNTRY=&IWB_INDUSTRY=SEM-BW&_SCLASS=IWB_STRUCT&FRAME=X"
    Info:          --- Default settings from command line ---
    Info:          HelpType=HtmlHelpFile
    Info:          HtmlHelpFilePath=
    193.169.1.136\Sap_Library\HTMLHELP\EHP4\EN
    Info:          --- Contents of profile "C:/WINDOWS/sapdoccd.ini" ---
    Info:          Could not read profile "C:/WINDOWS/sapdoccd.ini"
    Info:          --- Contents of profile "C:/Program Files (x86)/SAP/FrontEnd/sapgui/sapdoccd.ini" ---
    Info:          Could not read profile "C:/Program Files (x86)/SAP/FrontEnd/sapgui/sapdoccd.ini"
    Info:          --- Contents of profile "C:/Program Files (x86)/SAP/FrontEnd/sapdoccd.ini" ---
    Info:          Could not read profile "C:/Program Files (x86)/SAP/FrontEnd/sapdoccd.ini"
    Warning:     Could not read any profile
    Info:          --- Starting HtmlHelp ---
    Info:          CHM file="
    193.169.1.136\Sap_Library\HTMLHELP\EHP4\EN\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm"
    Info:          HTM file=""
    Error:          Could not find file "
    193.169.1.136\Sap_Library\HTMLHELP\EHP4\EN\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm"

    Hi Gurus, Thanks for the reply. In my case i cannot configure the HTMLHELPFIle type. I have found a note related to that.The CHM file cannot be open through shared folder for some reason. Since there are users working on the server i dont want to restart or made any changes on the operating system. i decided to install and configure the PlainHTML file type and its works fine.
    Note 920997 - Help files (.chm) cannot be opened through Shared Folder
    So to resolve the problem i have installed the PlainHTML type and it's working fine.
    Thank you.

  • Configuration Required to set up XI in System

    Hi to all,
    Can anyone provide me the  Minimum Configuration required to set up XI system
    Thanks in Advance

    Hi,
    Refer below link
    Installation Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
    Configuration Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    Also this
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a5550de0-0701-0010-a8b4-9fd433a080f3
    https://websmp109.sap-ag.de/instguidesNW70
    Tuning guide -
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
    Thanks
    To install XI, what should be minimum configuration

  • Configuring SAP Provided oData services

    Hi All,
    I saw that sap has many pre-delivered many oData services.
    SAP NetWeaver Gateway Supported OData Channel Scenarios - SAP NetWeaver Gateway - SAP Library
    Has anyone configured them and got to work?
    I have a Hub Scenario and see that IW_CNT is a requirement for each of them. Configuration guide says that this is a component to be installed on the HUB server. Does it mean that DPC and MPC are going to be in the HUB for these scenarios? What if I want MPC DPC to be in backend ?
    Any experience or comment is welcome.
    Thanks
    Krishna

    Hi Krishna,
    Atanu is right. You either need to deploy either IW_CNT on systems prior to 7.40 and IW_FNDGC on 7.40 systems in the Hub.
    The services themselves are in maintenance mode and are not developed further. That's why they have been packed in 7.40 in a separate AddOn and are not shipped as part of the 7.40 standard.
    This is because we (SAP) do not plan to ship content via SAP NetWeaver Gateway but rather are shipping services as part of complete solutions such as SAP Fiori.
    Though the customer can use the services I would recommend to develop your own services instead (the BAPI's hat have been used are listed in the SAP Online Help).
    Another option if no development is wished would be to have a look at the applications that we are shipping with SAP Fiori.
    Best Regards,
    Andre

Maybe you are looking for