Configure session error # BFFF800B
I have a Dalsa camera model CR-GM00-H6400. It is a GigE camera. I have configured and used other Dalsa cameras on this system, but this camera gives me a session configuration error as soon as I click on it. The Dalsa viewer works fine. The camera is hooked up and talking. I can ping it. Why will NI-IMAQDx not start a session?. I am using the labview drivers supplied with my 2011 release and I also have the latest vision development module.
Also I have a Balser Scout camera model SCA640-120gm which the image comes up as a 641X494 pixels giving a skew to the final display. Is there any way to change this in NI-IMAQDx viewer in MAX. I have not tried this in the vision module yet because of the poor results in MAX caused me to switch cameras and then I found the problem described above.
Solved!
Go to Solution.
First the easy question. The error occurs on clicking on the camera and not on the grab. The screen shot of the error is below. Also a screen capture of my MAX is below.
I am running XP SP2.
Since I cannot even get the session started I cannot check on the packet size. No grab is in progress. The camera however indicates that it is connected to the application through a green LED. This goes out when I select away from the camera. There seems to be a problem bringing up the session screen with this camera. It works for the Genie C1400 which I also can connect and grab images with.
Attachments:
screen_capture_BFFF800B.jpg 93 KB
NI-MAX_version.jpg 12 KB
Similar Messages
-
JDeveloper 11g Toplink Session Configuration Editor Error
Hi everone,
In JDeveloper11g Relase1, Session Configuration Editor doesn't run correctly, always crashes,
and session.xml configuration file has validation errors, for example:
element primary-project not expected.
element login not expected.
element connection-pools not expected.
When I run a project, session.xml file doesn't parse correctly so no database connection establisted.
I am sending my session.xml file and error log.
Best Regards.
Session.XML file
<?xml version="1.0" encoding="windows-1254"?>
<toplink-sessions version="11g Release 1 (11.1.1.1.0)" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<session xsi:type="server-session">
<name>AnahtarV3</name>
<server-platform xsi:type="weblogic-10-platform"/>
<primary-project xsi:type="xml">META-INF/ToplinkMap.xml</primary-project>
<login xsi:type="database-login">
<platform-class>oracle.toplink.platform.database.oracle.Oracle11Platform</platform-class>
<user-name>xxxx</user-name>
<password>7D39547AAAC98C485237BC9ABBBAEFBA</password>
<sequencing>
<default-sequence xsi:type="native-sequence">
<preallocation-size>1</preallocation-size>
</default-sequence>
</sequencing>
<driver-class>oracle.jdbc.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@xx.yyyy.www:1521:zzzz</connection-url>
<force-field-names-to-upper-case>true</force-field-names-to-upper-case>
<optimize-data-conversion>true</optimize-data-conversion>
<trim-strings>false</trim-strings>
</login>
<connection-pools>
<read-connection-pool>
<name>read</name>
<max-connections>1</max-connections>
<min-connections>1</min-connections>
<login xsi:type="database-login">
<user-name>bonus</user-name>
<password>C9AB9547D3AC98C485237B7AABBAEFBA</password>
<driver-class>oracle.jdbc.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@oratest.boyner.trk:1521:bdbtest</connection-url>
</login>
</read-connection-pool>
<write-connection-pool>
<max-connections>1</max-connections>
<min-connections>1</min-connections>
</write-connection-pool>
</connection-pools>
</session>
</toplink-sessions>
Error Log:
javax.ejb.EJBException: EJB Exception: : Local Exception Stack:
Exception Description: Several [3] SessionLoaderExceptions were thrown:
org.xml.sax.SAXParseException: <Line 35, Column 30>: XML-24534: (Error) Element 'max-connections' not expected.
org.xml.sax.SAXParseException: <Line 36, Column 30>: XML-24534: (Error) Element 'min-connections' not expected.
org.xml.sax.SAXParseException: <Line 37, Column 34>: XML-24521: (Error) Element not completed: 'write-connection-pool'
at oracle.toplink.exceptions.SessionLoaderException.finalException(SessionLoaderException.java:91)
at oracle.toplink.tools.sessionconfiguration.XMLSessionConfigLoader.load(XMLSessionConfigLoader.java:250)
at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:448)
at oracle.toplink.tools.sessionmanagement.SessionManager.getSession(SessionManager.java:409)
at oracle.toplink.util.SessionFactory.getSharedSession(SessionFactory.java:137)
at oracle.toplink.util.SessionFactory.getSharedSession(SessionFactory.java:116)
at oracle.toplink.util.SessionFactory.acquireSession(SessionFactory.java:156)
at com.boyner.anahtar.ejb.user.Session.findTUserByUsernameAndPassword(Session.java:66)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy122.findTUserByUsernameAndPassword(Unknown Source)
at com.boyner.anahtar.ejb.user.Session_pgpyv4_lSessionImpl.findTUserByUsernameAndPassword(Session_pgpyv4_lSessionImpl.java:307)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:561)
at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2113)
at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3009)
at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:436)
at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:256)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1437)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2120)
at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:464)
at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:693)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:217)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:201)
at com.boyner.anahtar.utility.ADFUtils.executeOperation(ADFUtils.java:110)
at com.boyner.anahtar.session.BSession.btnLogin_ClientListener(BSession.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at com.sun.faces.application.MethodBindingMethodExpressionAdapter.invoke(MethodBindingMethodExpressionAdapter.java:88)
at com.boyner.anahtar.utility.BInProgressDialog.executeMethod(BInProgressDialog.java:81)
at com.boyner.anahtar.utility.BInProgressDialog.onPopupOpened_ClientListener(BInProgressDialog.java:71)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at oracle.adf.view.rich.event.ClientListenerSet.invokeCustomEventListeners(ClientListenerSet.java:176)
at oracle.adfinternal.view.faces.context.RichPhaseListener$DeliverClientEvent.invokeContextCallback(RichPhaseListener.java:589)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1392)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1312)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1406)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1312)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1406)
at oracle.adf.view.rich.component.rich.RichDocument.invokeOnComponent(RichDocument.java:159)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:675)
at oracle.adfinternal.view.faces.context.RichPhaseListener._invokeCustomEvents(RichPhaseListener.java:390)
at oracle.adfinternal.view.faces.context.RichPhaseListener.afterPhase(RichPhaseListener.java:331)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:352)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.boyner.anahtar.http.compress.GZIPFilter.doFilter(GZIPFilter.java:32)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Did you get the solution?
i am facing the similiar problem -
Hi Team,
In Production IC AGENT Bussines role ,I have configured the bussines role.in DEV,and QA system it is working fine...in production ,iam getting error as below.
Worker session error in session initialization(SAM_QUEUE NOT SET )
Type = SYSTEM_ERROR,ID = ERROR_SESSOPN_INIT,description=
Could youe please help here..
Thanks
KalpanaHi Kalpana,
Please take a look at KBA 1954574 - Problems with CRM IC Functionalities related to Communication Session (alerts, greyed out ready/not ready buttons, agent dashboard) in complex system landscapes
This details a few things you need to check.
Let me know how you get on. If you have any questions or concerns.
Kind Regards,
James -
Disco10g Viewer session errored on export to excel Javascript1.2 must ena
Hi,
Disco Viewer session errored on export of Workbook. The following error is received in exported excel file "Your browser must support Javascript 1.2 and Javascript must be enabled in your browser to run OracleBI Discoverer properly." This report exports OK from Plus and Client.
Your valuable inputs are highly appreciable.
Thanks in Advance,
Venkat,To add to Patrick's suggestion....
What I am suggesting is not the cause of the FLOWS_030000 user existing error, but could be another issue which caused your installation to fail.
In your post, you said...
This is the command i gave to configure from SQL prompt:
@D:\Apex3.0\apexins.sql <Newly Create User> <Newly Created Tablespace> <Newly Created Tablespace> TEMP /i/
You have specified an absolute path when running the apexins.sql script. In order for the installation to succeed, you must first change your working directory to the directory where you unzipped the apex_3.0.zip file and then run the script. This is because the apexins.sql script subsequently references other sql scripts, using relative paths.
You have also not included a password in your command, was this just for purposes of the posting, or could this also be an issue, as in:
@apexins password tablespace_apex tablespace_files tablespace_temp images
Hope this helps,
Anthony
http://anthonyrayner.blogspot.com -
Initializing Configurator session thru CIO
Hi,
I am looking for a 'sample java code' to understand how to initialize Configurator session thru CIO.
I did go thru the 'Oracle Configurator Extensions and Interface Object Developer’s Guide' , but the sample code provided over there is too simple.
I am looking for something more, a sample code which can help me understand how to 'choose options', 'populate value' thru the CIO.
AkhilAkhil,
I have an example of working with initializing a Configurator session. In my first example, I started by doing all of the java within a JSP. Eventually, I was able to put the java into specific classes and call these classes and methods from a JSP. In my scenario, the JSP was the vehicle for launching the application, but it is not required. I am sure you can do the same from a pure-java program as well.
An example of the important Java aspects that were used are listed below:
//Set some default variable values
String dbcFileName = "<path to DBC file>";
CIO cio;
Context context;
String errMessage = "No errors";
IRuntimeNode rootNode = null;
Configuration cfg = null;
//set the context and create the cio object
context = new CZWebAppsContext(dbcFileName);
cio = new CIO(); // Create shared global CIO
// Create the ConfigParameters object and set non-default parameters
int modelId = 34272620;
String lineId = "155184891"; //used to pass oe line id as client_line
ConfigParameters cp = new ConfigParameters(modelId);
java.util.Calendar modelLookupDate = Calendar.getInstance(); //current date and time
//start the configuration using the cio object previously created
try {
cp.setModelLookupDate(modelLookupDate);
cp.addUserParam("client_line", lineId);
cfg = cio.startConfiguration(cp, context);
rootNode = (IRuntimeNode)cfg.getRootBomModel();
} catch (Exception e) {
errMessage = e.getMessage();
//This part was important. For some reason, when you launch the model, the ROOT node is NOT selected as we would normally expect
//This part of the code will select the top/root node of the configuration.
String exceptionOutput = "no errors";
if (rootNode instanceof StateNode) {
StateNode stateRootNode = (StateNode)rootNode;
try {
ConfigTransaction tr = cfg.beginConfigTransaction();
stateRootNode.setState(IState.UTRUE);
cfg.commitConfigTransaction(tr);
} catch (Exception e) {
exceptionOutput = "Exception Encountered: " + e.getMessage();
//Here you can now begin side-affecting the model using your standard CIO calls (eg. set values, select options, etc.). Be sure to use Config Transactions.
//I have noticed that if you have CXs that you want to execute at the end of the configuration, you will need specifically tell the config object to execute the event.
//I don't recall exactly how this was called, but it should be documented in the JavaDoc or in the CX Guide.
//Now we have to close out the session
String errMessageB = "No errors";
long configHdrId = 0;
long configRevNbr = 0;
boolean configValid = false;
boolean configComplete = false;
try {
cfg.saveNew();
configHdrId = cfg.getConfigHeaderIdLong();
configRevNbr = cfg.getConfigHeaderRevisionLong();
configValid = cfg.isValid();
configComplete = cfg.isComplete();
cio.closeConfiguration(cfg);
context.releaseJDBCConnection();
context.free();
} catch (Exception e) {
errMessageB = e.getMessage();
}Edited by: JasonBatzlaff on Nov 20, 2012 7:33 AM -
CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error
I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html>I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html> -
Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
MadhuHi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure -
OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB
I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfullyWhenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin -
How to configure custom error page in WebServer 6.1 if instance is down
Hi ,
I have deployed an application on port 82.
If the instance is down, want to configure custom error page in Sun One Webserver 6.1 so that the it displays a customised message rather than browser displaying its custom DNS error page.
In web.xml, configured the 404/500 error messages, but if the instance is down, my web application does not receive the request. So it should be defined at the root level.Where to configure the same?
Thanks for the help in advance.You can use Error function "send-error" http://docs.sun.com/source/817-1834-10/crobjsaf.html#wp20007
It has an example
Error fn=send-error code=401 path=/sun/server61/docs/errors/401.html -
How to configure a error queue for weblogic jms topic
Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
MingzhuangMingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj -
With the new seession in IE gives session error for new user
Hi,
In new opened IE if i tries to login with new user. It is switching b/w the files in the status bar(ie., Header1.jsp and ListServicecall.jsp simultaneously) and at end the session error result will arise.
But for the second time if i login with the same username/password the page is displaying properly. please Can any one help out.
Thanks,
Satish RFirst time if the user logins to IE in the HP Service Desk(SD) page. Some of the pages will iteratively loops and give a session expires error. After that the user logins to the page with no error.
If i create a new copy of the data from the existing folder and if i try to run then the result will be error for that folder also.
ie., Assume folder 123 where, first time for every new login user the session expire error occurs. later they'll login without any problem.
If i rename the folder 123 to xyz/create new copy and rename then, the same problem repeats. First time for the new user it will give session expire error and later he can login to the HPSD page with no error.
Is it require cookies to be programmed in that program.
Regards,
Satish R -
Configuration Check Error in Managed System Configuration
Hi dear experts,
I come across a problem as the screenshot shows blew:
I check some relevant information, but no issues found:
1.
DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
saphostexec running (pid = 7094)
sapstartsrv running (pid = 7097)
10:46:34 24.06.2014 LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 7130)
DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
SAPSYSTEMNAME = SAP
SAPSYSTEM = 99
service/porttypes = SAPHostControl SAPOscol SAPCCMS
DIR_LIBRARY = /usr/sap/hostctrl/exe
DIR_EXECUTABLE = /usr/sap/hostctrl/exe
DIR_PROFILE = /usr/sap/hostctrl/exe
DIR_GLOBAL = /usr/sap/hostctrl/exe
DIR_INSTANCE = /usr/sap/hostctrl/exe
DIR_HOME = /usr/sap/hostctrl/work
service/admin_users = daaadm
service/logfile_000 = /tmp/s
service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
And the version of hostagent is up-to-date.
2.The URL
- http://<SMDhost>:1128/SAPOscol/?wsdl
- http://<SMDhost>:1128/SAPHostControl/?wsdl
can be accessed.
3.The step 3 in managed systems configuration is executed successfully.
4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
Now I have no idea how to proceed, please give me some advice, thank you in advance.
Best Regards,
Pany PanHi Pany
Kindly check the below two sapnote
1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
Moreover , you need to check/verify/maintain the parameter in configtool
ThreadManager -> MaxThreadCount
Total number of Diagnostics Agents * 2 + 50
1250
ThreadManager -> InitialThreadCount
Total number of Diagnostics Agents * 1.5
900
ThreadManager -> MinThreadCount
Total number of Diagnostics Agents
600
ConnectionManipulator -> maxSoTimeOutConnections
Total number of Diagnostics Agents * 1.35
810
ConnectionManipulator -> MaxParallelUsers
Total number of Diagnostics Agents + 50
650
In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki
guide check the section Required Solution Manager Java Stack Settings (Scalability)
I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
minthreadcount , maxSoTimeOutConnections.
With Regards
Ashutosh Chaturvedi -
Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
RajHi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Cannot connect to the configuration database Error in HTTPS
Hi
We have a SharePoint 2010 farm ,with more then 20 web application running . I am getting "Cannot connect to the configuration database" error in one web application when we browse through https
The same application is working fine when we browse through http . I am using AAM i have 2 web server which is been network load balanced and the https traffic comes through F5
Kindly help to resolve the issue
PrabakarHI Prabakar,Check the below URL that exactly related to the issue.
http://expertsharepoint.blogspot.de/2014/05/cannot-connect-to-configuration-database.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Ewfmgr: Failed getting protected volume configuration with error 1
Hello,
I created a Windows 7-64 image for an Ivy-Bridge VME card. The image contains EWF with RAM-REG.
The disk was divided into 2 partitions with the windows installer and the image was successfully installed.
As I'm using RAM-REG, all
the disk was allocated.
After the image was installed I tried to run "ewfmgr c:" and got the current status.
Then I created a GHOST image and wrote the image on a new card with a clean disk.
After Windows booted, running "ewfmgr c:" gave:
Failed getting protected volume configuration with error 1
I found few threads on this issue but failed to understand what is the right solution.
Can you help ?
Thanks,
ZvikaThe Problem is always Volumeid related (diskid)
Explaination:
Sysprep creates new bcd for the System. - Therefore it's recommended to use sysprep (and SID and so on..) but if you're lazy or don't have Domain Controller and so on or always use physical seperated (better not Internet connected) machines you would be
totaly fine with non-syspreped Images. You only Need updated/new bcd.
Captured wim has 'old' bcd (if there is no seperated MSR Partition) you can update this 3 entries within winpe and your Image will boot:
bcdedit /store c:\boot\BCD /set {BOOTMGR} device boot
bcdedit /store c:\boot\BCD /set {DEFAULT} device PARTITION=C:
bcdedit /store c:\boot\BCD /set {DEFAULT} osdevice PARTITION=C:
(boot could also be Partition=c: or all entries could be boot - and /store is not needed as in winpe bcdedit automatically Redirects the commands into the other/System (found) bcd. But i always recommand to specify the bcd store you want to edit, like in
this lines)
The definition of "C:" in this Parameter is 'translated' into volumeid/diskid. - So in the bcd is not "C:" it's some DiskID.
Instead of the 3 entries you can just create a whole new bcd with updated volumeid/diskids. --> It would be enough to run bcdboot /s C:\ (or whatever the current boot (c:\) Partition is.
EWF needs to be reconfigured as it also works with Volume/Diskids. So it needs additional command while running (online).
ewfcfg /install-configuration for win7
rundll32 ewfdll.dll,ConfigureEwf for win xpe/wes2009.
Windows Embedded Developer and Scripting Guy //Germany (http://www.wesnext.com)
Maybe you are looking for
-
IPhoto not responding when importing photos from Canon Powershot SD450
Recently I have been unable to import photos from my camera. I can see the thumbprints but when I try to import iPhoto hangs and has to be force quit? I am able to take the SD Card and insert it into an SD card reader, so there is no problem with the
-
What are Built In's in Oracle forms. Are they like built in trigggers. how
What are Built In's in Oracle forms. Are they like built in trigggers. how r they different from triggers which r also bulit in. thanks
-
The product maintenance level of the current installer weblogic server 10.3
Hello members, I already install weblogic, Oracle SOA and every thing work file, well later in last step when i tried to install Jdeveloper so i choose use existing Middleware i got an error that Jdeveloper and Middleware that i already install at PC
-
Help. I want to get firefox shortcuts in Safari
Ok so I am an avid firefox user but I kinda like the way safari runs so I am attempting to change over to that. My biggest issue is that I am going from firefox, where I use command+#'s to change tabs but this doesn't work in Safari, instead it chang
-
Urgent helpppp needed - mesage driven beans
hi there am a beginner at ejb...have just started yesterday.... what i did was i read the basics of MDB and tried to run an example...but m stuck sumwhere n tried a lot but unsuccessful... i am using jboss to deploy... i am wrting a basic mdb where t