Configure SLD during the Installtion
I am installing the XI and EP system with NetWeaver 04s. At the moment, I am at step "Cental SLD", pretty much the beginning of the installtion. It says that I have to enter my SLD configuration.
I have the option between:
- Configure local SLD
- Register in existing central SLD.
I am assuming that I have to have installed an SLD upfront. Is that true??? If yes, how can I install the SLD before the installtion routine?
Which option should I choose??
Thanks.
Regards
Go:khan
Enc
Go through the Urls and configure your SLD. If you do face problem post it back here.
Re: Central SLD Configuration.
Re: SLD configuration/move
---Mohan
Similar Messages
-
In system log shows Error in technical configuration Error during the ret
Hi,
In sm21 it shows <Error in technical configuration Error during the retieval of logon data stored in>.
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
30808 Dialog work process No. 009 SAPSYS 1 TASK_VITAL_RUN K SAP Web AS Problem SOAP_FT_TOOLS
In wp trace shows below with the matched time:
A Thu May 26 13:08:03 2011
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
H
H Thu May 26 13:08:05 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:09 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:10 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:12 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:13 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:15 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
Kind of error when retrieve the logon data.
Kernel 711 PI system
SP level 04
What possibily casued this? No further information I can have.
Thanks,
EmmaHello
Please implement the latest kernel for your release. See note #19466. The error will not occur with the latest kernel patch.
Regards
Mark -
Error during the installtion of OWB under Vista
Dear all
I have downloaded OWB in my laptop. Now tried to install the OWB and will get the error message like follows:
Error in the writing on directory: c:\users\User\AppData\Local\Temp\OraInstall2009-09-01....
Make sure that the directory is writable, has cap. about 45 MB.
Now my Temp has 31 MB, and is writable. Thus pls. give ma an advice, how to continue with the installtion.
Thanks in advance
MehdiHi
I have OWB 10.2.0.3 Vista. I have space capacity on TEMP about 31 MB. I cannot increase the capacity. Is there any posibility to use another directory as TEMP. I installed several times OBW, but i had never this issue before. Pls. advice
Thanks in advance
Mehdi -
An error occurred during the processing of a configuration file.
hi,
On installation and using oracle session provider, i am getting following error.
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Line 51: <providers>
Line 52: <add name="MyOracleSessionStateStore"
Line 53: type="Oracle.Web.SessionState.OracleSessionStateStore,
Line 54: Oracle.Web, Version=2.112.2.0, Culture=neutral,
Line 55: PublicKeyToken=89b483f429c47342"
Can any one help me?
Thanks in advance
Sivamy server :
os windown server 2003
iis 6.0 -
How can I reset the age entered during the first configuration set up?
how can i reset the age entered during the first configuration of a brand new i pod touch. The age is incorrect and does not allow me to open a new i-tunes at a later configuration step. Error meesage: you are not old enough to open a new i-tunes account.
Thanks for support to solve the problem.- Terminate the setup for obtain the account and then try again with same email address.
- Next would be to contact iTunes.
Contact iTunes -
SLD installation - easy and quick configuration to activate the SLD
Dear All,
I am installing a SLD in a separate server, base on AS-JAVA usage type.
I am reading guide from http://www.sdn.sap.com/irj/sdn/nw-sld.
After installing the SLD, I read that "You only have to perform the easy and quick configuration to activate the system landscape directory there. No further installation required, only quick configuration to activate SLD in a system."
My question :
Is there a guide to perform the easy and quick configuration" ?
Thanks for your input
Best regards
SAP NetWeaverAdminHello,
When you define iit as SLD in the installation phase it should come as preconfigured.
All you need to do is check whether things are active and bring the system to latest CIM.
Then start adding other system to this new SLD as per standard method.
Once you finish the installation of the system http://hostname:5<instance number>00/sld needs to be run.
Check if that URL is active and in administration link check if the SLD is running.
That should be it.
Regards
Vivek -
Error in configuring SLD - Solman 7.1
Hello All,
Dear Team,
We face issue during the SLD configuration of solution manager 7.1.We are in the process of configuring local SLD.After we select SETUP LOCAL SLD,we are prompted for the login credentials.And after loggin with j2ee_admin user, it is prompting to fill the passwords of sldsusers and when we click next...it is throwing error.
Kindly suggest
Thank You,
Regards,
HasanThe error message is,
Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
java.lang.NullPointerException
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.handleUIElementEvent(HtmlClient.java:1011)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.updateEventQueue(HtmlClient.java:386)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.prepareTasks(AbstractClient.java:93)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:328)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
... 21 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.2; MS-RTC LM 8; .NET CLR 1.1.4322; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0208.20110331115915.0000 (release=NW702_08_REL, buildtime=2011-05-12:14:00:48[UTC], changelist=108682, host=pwdfm319), build date: Sat Oct 22 10:50:45 GMT+05:30 2011
J2EE Engine 7.02 PatchLevel 108637.
Java VM IBM J9 VM, version:2.3, vendor: IBM Corporation
Operating system AIX, version: 5.3, architecture: ppc64
Session & Other
Session Locale en_US
Time of Failure Mon Oct 24 12:57:06 GMT+05:30 2011 (Java Time: 1319441226723)
Web Dynpro Code Generation Infos
sap.com/tclmctcccltemplate_installer~wd
SapDictionaryGenerationCore 7.0208.20110331115706.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:51:23[UTC], changelist=108624, host=pwdfm319.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0208.20110331115706.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:51:27[UTC], changelist=108624, host=pwdfm319.wdf.sap.corp)
SapGenerationFrameworkCore 7.0208.20110331115713.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:42:46[UTC], changelist=108629, host=pwdfm319.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0208.20110331115908.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:55:09[UTC], changelist=108680, host=pwdfm319.wdf.sap.corp)
SapMetamodelCommon 7.0208.20110331115743.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:43:16[UTC], changelist=108648, host=pwdfm319.wdf.sap.corp)
SapMetamodelCore 7.0208.20110331115743.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:43:13[UTC], changelist=108648, host=pwdfm319.wdf.sap.corp)
SapMetamodelDictionary 7.0208.20110331115707.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:49:30[UTC], changelist=108625, host=pwdfm319.wdf.sap.corp)
SapMetamodelWebDynpro 7.0208.20110331115910.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:53:04[UTC], changelist=108681, host=pwdfm319.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0208.20110331115915.0000 (release=NW702_08_REL, buildtime=2011-05-12:14:01:44[UTC], changelist=108682, host=pwdfm319)
SapWebDynproGenerationCore 7.0208.20110331115908.0000 (release=NW702_08_REL, buildtime=2011-05-12:13:55:13[UTC], changelist=108680, host=pwdfm319.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0208.20110331115915.0000 (release=NW702_08_REL, buildtime=2011-05-12:14:01:44[UTC], changelist=108682, host=pwdfm319)
sap.com/tclmwebadminmainframewd
SapDictionaryGenerationCore 7.0203.20100111100016.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:50:06[UTC], changelist=78395, host=PWDFM256.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0203.20100111100016.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:50:10[UTC], changelist=78395, host=PWDFM256.wdf.sap.corp)
SapGenerationFrameworkCore 7.0203.20100111100029.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:40:33[UTC], changelist=78400, host=PWDFM256.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0203.20100111100220.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:54:24[UTC], changelist=78451, host=PWDFM256.wdf.sap.corp)
SapMetamodelCommon 7.0203.20100111100110.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:41:08[UTC], changelist=78419, host=PWDFM256.wdf.sap.corp)
SapMetamodelCore 7.0203.20100111100110.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:41:04[UTC], changelist=78419, host=PWDFM256.wdf.sap.corp)
SapMetamodelDictionary 7.0203.20100111100018.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:47:58[UTC], changelist=78396, host=PWDFM256.wdf.sap.corp)
SapMetamodelWebDynpro 7.0203.20100111100223.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:52:11[UTC], changelist=78452, host=PWDFM256.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0203.20100119080338.0000 (release=NW702_03_REL, buildtime=2010-02-19:15:01:32[UTC], changelist=79187, host=pwdfm256)
SapWebDynproGenerationCore 7.0203.20100111100220.0000 (release=NW702_03_REL, buildtime=2010-02-19:14:54:28[UTC], changelist=78451, host=PWDFM256.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0203.20100119080338.0000 (release=NW702_03_REL, buildtime=2010-02-19:15:01:32[UTC], changelist=79187, host=pwdfm256)
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.handleUIElementEvent(HtmlClient.java:1011)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.updateEventQueue(HtmlClient.java:386)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.prepareTasks(AbstractClient.java:93)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:328)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) -
Configuring PI during Integration of Cloud for Customer with ERP
While trying to Integrate SAP Cloud for Customer with SAP ERP using PI, while configuring PI, we need to create a Technical and Business System in SLD for Cloud for Customer. During the Technical System configuration wizard, it asks for "Technical System Identification" and "System Host Name". How do I find this? Is it on Cloud for Customer?
Thanks and regards,
Nikhil Da Gama Pais,
[email protected]Hi Nikhil,
I think its an alias given to the system as the system is being created as a standalone. You can give your own name for understanding purpose as I also gave my own acronym for cloud system in PI.
Thanks,
Ravi -
Multi-level error propagation during the execution of CFM2 transaction
Hi,
We are implementing SAP SCM 5.0 integrated to SAP R/3 Mills IS.
During the execution of CFM2 transaction, while trying to activate the integration model for the object u201COrdersu201D for the very first time, the following error message appears:
*"Multi-level error propagation carried out".*
There are also messages related to inbound queues blocked. In the case of maintenance orders, CIF_MNT_INBOUND message shows up. While working with Production orders, CIF_ORDER_INBOUND message emerges.
The items listed below should be taken into account:
-The production orders that are meant to be transferred to APO are regular production orders corresponding to several products.
-We are working with configurable materials.
-We are working with the active model (000) and for each plant we are using 2 different planning versions.
Regards,
Analía NahmíasDear Analía,
The corresponding error messages issued when executing //CCR indiacted the peg-ids are missing in liveCache.
Recommendations:
-Run transaction /SAPAPO/OM17 to check the internal consistency between database and liveCache within SCM system. Correct the inconsistencies
-Execute report /sapapo/cif_deltareport3 to correct the inconsistencies between ECC and SCM system
Regards,
Tibor -
Error CLSRSC-507 during the execution of root.sh on second node
Hi all.
OS.......: Red-Hat 6.5
RDBMS: Oracle 12.1.0.2.0
During the installation of a 2-node RAC in a RHEL 6.5, during the execution of the root.sh script in the second node, i get the following error:
[root@oraprd02 grid]# ./root.sh
Performing root user operation.
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/12.1.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/12.1.0/grid/crs/install/crsconfig_params
2015/05/04 22:47:16 CLSRSC-4001: Installing Oracle Trace File Analyzer (TFA) Collector.
2015/05/04 22:47:59 CLSRSC-4002: Successfully installed Oracle Trace File Analyzer (TFA) Collector.
2015/05/04 22:48:00 CLSRSC-363: User ignored prerequisites during installation
OLR initialization - successful
2015/05/04 22:48:46 CLSRSC-507: The root script cannot proceed on this node oraprd02 because either the first-node operations have not completed on node oraprd01 or there was an error in obtaining the status of the first-node operations.
Died at /u01/app/12.1.0/grid/crs/install/crsutils.pm line 3681.
The command '/u01/app/12.1.0/grid/perl/bin/perl -I/u01/app/12.1.0/grid/perl/lib -I/u01/app/12.1.0/grid/crs/install /u01/app/12.1.0/grid/crs/install/rootcrs.pl ' execution failed
The root.sh on the first node completed successfully. I get the succeeded message from the script in the first node.
Have anyone faced this problem? Any assistance will be most helpfull.
Thanks in advance.crsd and cssd logs were empty and there was no relevant info in crs alert
i am just reinstalling clusterware now
one thing i wanted to ask
why does owner ship of raw files change back to root (after node restart)
even though i chnged them to oracle -
Error at phase "Configure SLD" NW 7.0 Central instance step
Hi All
I am installing NW 7.0 EHP1, on clustered Oracle10g, win2003. I have an error on AMSC step, configure SLD.
here some logs
java.exe.log
ConfigMainExt state401
TYPE=A<BR>STATE=401<BR>INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
ALL USERS ARE NOT LOCKED, only JAVA_GUEST is locked
sapinst.log
INFO 2009-06-13 16:13:15.983
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:13:16.014
Removing file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:02.843
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\x.
INFO 2009-06-13 16:14:02.843
Removing file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\x.
INFO 2009-06-13 16:14:05.718
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:05.718
Removing file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:07.374
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to '
C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.12.xml'.
INFO 2009-06-13 16:14:08.906
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to '
C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.13.xml'.
WARNING 2009-06-13 16:14:20.218
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation.
Operating system error message: The filename, directory name, or volume label syntax is incorrect.
INFO 2009-06-13 16:14:22.984
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/inifile.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/inifile.5.xml'.
INFO 2009-06-13 16:14:23.249
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|2|0
W2K_ServicePack_Check
ind
ind
ind
ind
2
0
INFO 2009-06-13 16:14:38.781
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/keydb.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/keydb.5.xml'.
INFO 2009-06-13 16:14:38.937
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.14.xml'.
INFO 2009-06-13 16:14:39.78
Execute step configSLDMainLocalMapSecRolesToUsers of component
NW_Doublestack_CI
ind
ind
ind
ind
0
0
SAP_Software_Features_Configuration
ind
ind
ind
ind
17
0
NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0
INFO 2009-06-13 16:14:39.859
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\java.exe.log.
INFO 2009-06-13 16:14:39.890
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/
tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX
AAAPRD:50200 J2EE_ADMIN XXXXXX is written to the logfile java.exe.log.
INFO 2009-06-13 16:14:40.000
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/
apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX
AAAPRD:50200 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
ConfigMainExt state401
TYPE=A<BR>STATE=401<BR>INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
ERROR 2009-06-13 16:14:40.000
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
ERROR 2009-06-13 16:14:40.234
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|
SAP_Software_Features_Configuration|ind|ind|ind|ind|17|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|
NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.).
sapinst_dev.log
TRACE 2009-06-13 16:14:39.843
NWCallJava: Arguments passed: ROLE=DataSupplierLD,USER=SLDDSUSER,
COMPONENT=sap.com/com.sap.lcr*sld,HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=XXXX
INFO 2009-06-13 16:14:39.859 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\java.exe.log.
INFO 2009-06-13 16:14:39.890
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/
tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX AAAPRD:50200
J2EE_ADMIN XXXXXX is written to the logfile java.exe.log.
INFO 2009-06-13 16:14:40.000
CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster
/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt
XXXXXX AAAPRD:50200 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
ConfigMainExt state401
TYPE=A<BR>STATE=401<BR>INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
TRACE 2009-06-13 16:14:40.000
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
TRACE 2009-06-13 16:14:40.000
Function setMessageIdOfExceptionMessage: nw.configError
ERROR 2009-06-13 16:14:40.000
CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
TRACE 2009-06-13 16:14:40.172 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2009-06-13 16:14:40.234 [sixxcstepexecute.cpp:950]
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |
NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|17|0|NW_Usage_Types_Configuration_AS
|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status
ERROR ( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile
java.log: 'JSE '.).
TRACE 2009-06-13 16:14:40.265 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP NetWeaver 7.0 including
Enhancement Package 1 > SAP Process Integration > Oracle > High-Availability System > Central Instance
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.).
You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i>
to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p>
Log files are written to C:\Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI. </p> </body></html>
TRACE 2009-06-13 16:14:40.265 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUIHi,
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcrsld, HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|). The provided user data might be incorrect or user might be locked.*
Above error is mainly coming because of 2 reasons:
1) user is locked SLDDSUSER. Please check this user of locked...if it is global user which is used by other system as well to connect to SLD then might be password in any other system will be worng which is causing this user globally locked...
2) Potential reason might be roles of this user is not properly mapped or this user does not contains appropriate roles..Please check SLDDSUSER profile..it must contains all roles...
Please check above if error still persists the paste log again...
Thanks
sunny -
I received the above error reinstalling SQL Server 2008. I have tried all suggestions. This error also appears when I install any version of SQL Server.
I have also installed;
Microsoft® .NET Framework Version 2.0.50727.4927
Microsoft® .NET Framework Version 4.0.31106.0
Microsoft® .NET Framework Version 3.0.6920.50
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052081
Exit facility code: 1212
Exit error code: 1935
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-23 19:17:20
End time: 2014-02-23 19:21:35
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: OHPC
Machine processor count: 2
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: H:\SQLServer2008R2_SP1\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: OHPC\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
SFC/ Scannow
2014-02-23 19:08:22, Info CSI 0000016f [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:08:22, Info CSI 00000170 [SR] Beginning Verify and Repair transaction
2014-02-23 19:08:23, Info CSI 00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:23, Info CSI 00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:08:26, Info CSI 00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:27, Info CSI 0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:08:27, Info CSI 00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 00000182 [SR] Verify complete
2014-02-23 19:12:33, Info CSI 00000326 [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:12:33, Info CSI 00000327 [SR] Beginning Verify and Repair transaction
2014-02-23 19:12:33, Info CSI 00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:12:35, Info CSI 0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:12:36, Info CSI 00000331 [SR] Verify complete
2014-02-23 19:13:14, Info CSI 0000035d [SR] Repairing 3 components
2014-02-23 19:13:14, Info CSI 0000035e [SR] Beginning Verify and Repair transaction
2014-02-23 19:13:14, Info CSI 00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:13:15, Info CSI 0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:13:15, Info CSI 0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:13:15, Info CSI 00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000377 [SR] Repair complete
2014-02-23 19:13:15, Info CSI 00000378 [SR] Committing transaction
2014-02-23 19:13:15, Info CSI 0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repairedSummary:
Attempted proposed solution. Error still appears.
This is installed:
Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
Microsoft Visual C++ 2005 Redistributable 8.0.56336
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
I reinstalled:
vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
Results:
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
Corporation. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
Reconfiguration success or error status: 0.
I installed SQLServer2008R2_SP1
Same error message came up;
SqlSupport_KatmaiRTM_Cpu64_1.log
MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
{837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files -- Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
Thanks, Ted U -
We have a weird situation we're trying to troubleshoot for quite a while: We have multiple .vsd files stored on our network in DFS shares.. We have multiple users who cannot open the files, when they try by navigating to the file and double-clicking it,
they get "An error (1502) occurred during the action Open. File not found"
However, if they copy and paste the file to the same exact network folder, THAT file they can open with no problem!
The problem is very bizarre. I've checked obvious things such as file/folder permissions, versions of Visio installed, things in common between people who can and can't open the files.. I even did some testing today with some strange results...
Windows 7 x64 machine with Visio 2010 Pro installed (x86):
1. Opened file by double-clicking it in explorer, "Got the 1502 error"
2. Tried it again, this time I just get "File not found"
3. Opened Vizio, did a File --> Open --> navigated to the file and opened it that way... 1502 error.
4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.
5. Closed the copy, tried to open the original, still get file not found / error 1502.
The file does exist, it IS there.. sometimes the user just copies it to their local desktop (well, it's not really local, it's redirected) and it opens fine there.. other users email themselves a copy of the file and then open it that way.. it works for
some, not for others.. and there's no discernible pattern yet to identify who this is affecting. Anyone have any ideas?
-Keith
-Keith ElkinHi,
Based on the error message, the issue may be caused by the Visio file is occupied by some other program in DFS.
>>4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.<< If you did this step, the Visio file would rename in the same folder, like file1.vsd. Thus, it opened well.
Thus, I recommend you check the file's status in computer management in DFS server, see the below image:
If the affected Visio files were occupied, please try to clean them(right click>close the file) to test.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Sorry,
This didn't help, the files are not open, locked open, and the issue still persists. Any other suggestions?
-Keith
-Keith Elkin -
During the installation of grid infra(cluster) for Oracle 11.2 RAC one.
Good Day All, and thanks in advance…
During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
I ran the Cluster Verify Check – all passed.
Many Thanks
Ezekiel Filane
/u01/app/11.2.0/grid#./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-10-19 10:33:11: Parsing the host name
2010-10-19 10:33:11: Checking for super user privileges
2010-10-19 10:33:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User grid has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
Start action for daemon aborted
CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.435: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.435: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.435: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-10-19 10:33:14.461: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.462: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.462: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.462: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.463: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.483: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.483: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.484: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.541: [ OCRAPI][1]a_init:6a: Backend init successful
2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...Hi,
We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
[root@P01DOU417] /u01/app/11.2.0/grid #
LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
2010-11-13 17:22:14: Starting CSS in clustered mode
2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
2010-11-13 17:32:28: Command output:
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:28: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:28: Checking the status of css
2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:33: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:33: Checking the status of css
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-5804: Communication error with agent process
2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
2010-11-13 17:32:38: Package File Line Calling
2010-11-13 17:32:38: --------------- -------------------- ---- ----------
2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
2010-11-13 17:32:38: ####### End DIE Stack Trace #######
2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
Any help on this is appreciated.
Edited by: user12019257 on Nov 17, 2010 1:26 PM -
BBP_PO_SEND_XML - Not triggered during the creation of PO
Hi All,
We are using SRM 7.0, configuration for sending PO in the form of XML is done as suggested with the method BBP_PO_SEND_XML. The problem is, this BADI is not triggered when we save (even after order) the PO with XML option and the status is displayed as Incorrectly processed. But, when I select the Incorrectly processed output type and click on Repeat Output, the BADI is called and is processed succesfully.
Any reasons, why the BADI is not triggered during the creation or change of PO and is getting triggered only when we select the option Repeat Output? Please help me in correcting this issue.
Thanks,
Phani.Logic inside META_PO_SEND was written in user name check. Whereas the method BBP_PO_SEND_XML is triggered with batch user. Due to this reason, custom logic is not triggered.
Maybe you are looking for
-
When i use Adobe Premiere Elements 10, after about 10 minutes it stops working please help
I recently purchesed Adobe premiere elemnts 10 and it installed correctly, and it loads up fine but once i start putting video together, it starts to mess up, the video i cant watch because its very slow and jumpy and then after a few minutes of me e
-
Hi , I have a message area and i had linked the "Enable" property of the message area to the context attribute , even if i set the Contex attribute to TRUE the message is still disabled , can some one explain me how to disable message area by link
-
Naming Conventions in OLAP/AWM
Hi, We are in the process of creating documentation guidelines as well as the documentation for our Oracle OLAP System. It would be of great help if the forum can share ideas or pointers to the kind of naming conventions we can establish for our Anal
-
Hi pals, Im trying to implement a jsp application which is capable of creating charts dynamically, The thing i need to know is how to create chart application in jsp.?
-
How to import only RAW images from folder with RAW & JPEGs?
My system is set up that I have both RAW & JPEGs in the same folder since I shoot JPEG+RAW. How can I import just the raw images without also sucking in the jpegs? There is no way to distinguish the difference in the Import box and also no way to eas