Configure SMS from ECC 6.0

Hello Team,
I want to configure SMS alerts from my ECC 6.0 system for SD related functional requirement.
I have referred many docs addressing the issue using SMTP & HTTP via third party / internal message relay servers.
Currently we do not have internal message relay server and due to security reasons will not prefer to go by commercial SMS gateways.
Need your inputs if there is any third approach where we can trigger message from SAP and send it from a local number like our normal SMS
Regards,

Hi,
try this link..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b03d0983-bda1-2b10-c09c-e93bb9956055?quicklink=index&overridelayout=true
regards
Rajashiva Ramalingam

Similar Messages

  • Moving configuration data from ECC to MDG

    Hi,
    We are also in process of moving the configuration data from ECC (Ehp 5.0) to MDG Hub (Ehp 6.0), looking for the option copying tables in transport request and moving the transport request to MDG-C.
    Appreciate your suggestion or best practices on the movement configuration data, is there is any best option to move the configuration data from ECC (Ehp 5.0) to MDG-C Hub (Ehp 6.0) as both the system on different Enhancement pack.
    thank you,
    Parvez

    Hello Parvez
    Go through the below thread.
    http://scn.sap.com/thread/3492091
    Kiran

  • Configurable products from ECC to CRM 2007

    Hi ,
    I understood from other posts that PME is now replaced by Product assignment block in the new Web GUI.
    My question, is this applies to configurable products downloaded from ECC?, Any special settings needed?
    I have a B2B scenario in Interaction center where in a sales order, diffrent variants of a product should be able to selected!
    How does the pricing handled in this case? Can we still use ECC to maintain the pricing conditions?
    Any info much appreciated.
    Thanks in advance.

    Hi Praveen,
    If you model your confid products in ECC, create variants in ECC, and download it to CRM, you really don't need PME.
    For Product Variants you can specify the Basic Data 2 tab to specify the Config Material name and configure the variant. Download these to CRM along with your KB.
    In CRM Sales Order, when you go to the configuration screen and configure the product, you have a tab on right hand side called as Product Variants. You can choose the appropiate variant from that column and replace the original config product with this one.
    Regarding Pricing, you can have the Pricing Conditions maintaines in ECC and downloaded to CRM. In case you are using variant pricing you can even download variant conditions to CRM.
    Regards,
    Kunal

  • Error Connecting Gateway from ECC

    Hi All,
    We are trying to configure connection from ECC to Gateway but getting following error. I have having SAP ALL access:
    No authorization to log via a trusted system (L-RC =0 T-RC=2).
    Please advice on this..
    Regards
    Rajesh

    Hi Rajesh,
    Yes, As suggested Derek in the target system must have Auth S_RFCACL.
    Thanks,
    Syam

  • Messages are reaching PI wthout any configuration in PI from ECC

    Hi,
              I am using PI 7.11. Its a fresh system so as of now there is no interfaces. Just a two days back only we have established the RFC connections ECC to PI and PI to ECC.  After these configuration we have transported one interface File to Proxy scenario. Strangly some of the messages are comming from ECC to PI and its failed because of no receiver found. Other than File to Proxy we dont have any scenario in PI.  Please find the below message details.
    Service : BS_SAP_XXX_200
    Interface Namespace :  http://sap.com/xi/APPL">QueryCodeList<>
    Payload :
      <?xml version="1.0" encoding="utf-8" ?>
    - <n0:QueryCodeListRequest xmlns:n0="http://sap.com/xi/BASIS" xmlns:prx="urn:sap.com:proxy:ECC:/1SAI/TASC66A5D70F4DF6172EFE5:701:2009/02/10">
    - <CodeDataType>
      <Name>BusinessTransactionDocumentTypeCode</Name>
      <NamespaceURI>http://sap.com/xi/SRM/SE/Global</NamespaceURI>
      </CodeDataType>
      <LanguageCode>en</LanguageCode>
      </n0:QueryCodeListRequest
    This is a syschronous scenario that to this interface is running at specified at on everyday.
    Can you pls let me know what might be the problem?
    Thanks & Regards,
    Puru

    Hi,
    I assume this scenario is not the one you transported for File to proxy.
    This is Generic Value help Service which is triggered because of some event configuration on ECC or some report calling outbound proxy with default runtime (PI runtime is default). Of course this will fail in PI because you haven't configured it in PI.
    Check following: SWF_BAM for events on ECC.
    Check if any report is creating SalesOrder, PurchaseOrder etc at that particular time.
    Issue is on ECC side not on PI side.
    Regards,
    Gourav

  • Alerts from ECC

    Chek these... i have a doubt which is bold below.....
    Alert Rules
         Message-based alerting is used to notify about errors that occur during message processing. It is based on the alert framework, among other things, so you can leverage the functions it provides, such as sending the alert by e-mail, fax, or SMS.
    By defining rules within the RWB, you can filter the monitored messages according to error code, error category, and message header attributes for sender and receiver. For instance, if a customer only wants to be informed immediately when his core business scenarios fail, the message-based alerting can be restricted to the respective interfaces only.
    -     Use RWB to define Alert Rules within PI
    -     Use ABAP for defining rules within ECC and generate an alert from ECC to PI by passing the right variables.
    My question is
    how do to this.....how to define rules within ECC and generate  an alert from ECC to PI by passing the right variables...?
    any idea guys....i am going with ALRTCATDEF...

    HI
    Refer the following links
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm -
    Alert
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    /people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 -- ccms alerts u2013 1
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 -- ccms alerts u2013 2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 -- ccms alerts --- 3
    Alerts with variables from the messages payload (XI) - UPDATED -
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration by Micheal
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    /people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
    I hope at the end of this you may get some knowledge on Alerts.
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
    we configure to Adapter Engine).
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
    (This is Important)
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
    /people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
    Alerts with variables from the messages payload (XI) - UPDATED -
    Alert configuration
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    Calling alerts from UDF
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Email Alerts
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    Alert Delivery
    /people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
    Transport the alerts
    http://help.sap.com/saphelp_nw04/helpdata/en/a6/5a94413aaad960e10000000a1550b0/frameset.htm
    XI: Alerts - Step by step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
    Triggering by Calling a Function Module Directly.
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Alerts with variables from the messages payload (XI) u2013 UPDATED
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Simple Steps to Get Descriptive Alerts from BPM in XI
    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
    Triggering XI Alerts from a User Defined Function
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Throwing Smart Exceptions in XI Graphical Mapping
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    cheers

  • Replicate sales orders from  ecc to crm

    Hi experts,
                        We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
    thanks in advance
    Andy

    Hi,
    To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
    You can search the forum for a detailed document with special focus on the integration points.
    Also have a look at the following SAP HELP link:
    http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
    Hope this helps.
    Thanks,
    Samantak.

  • Debugging RFC function module from ECC to CRM

    Hi All,
    My requirement is to debug an RFC function module present in CRM(7.0) system from ECC(6.0) system. A report program in ECC will call CRM custom FM. I found many posts in SDN with the same issue and tried to implement suggestions provided there. But I couldn't succeed. The approach I followed is:
    I logged in to ECC report program and kept an external breakpoint just before the function module call.
    I logged in to CRM system, opened the function module and kept an external breakpoint there.
    In both the systems I provided the dialogue userid( id through which I log in to SAPGUI) in the system->settings->debugging option.
    In CRM I activated the external break point in  transaction SRDEBUG.
    Now when I execute the report program in ECC, control stops at the breakpoint. If I press F5 at the function call, control is not going to the external break point set in the CRM FM. I am getting output of FM directly.
    I tried with different settings like turning on the check box for IP matching and session breakpoint active immediate, switching to classic debugger etc. I also tried to provide the RFC user id instead of dialogue user but system throws exception saying only dialogue userids are allowed. I found that by inserting an infinite loop statement, control goes inside the RFC CRM FM but I prefer not to change the code.
    Please let me know if I missed anything.
    Thanks and Regards,
    Naren

    Hi,
    Debug RFC calls
    When an RFC function module is called it is usually not possible to debug the call, using the below techniques we can achieve the same. For this example we are calling an RFC enabled FM in ECC system from CRM system.
    Scenario 1: Calling a custom RFC FM
    STEP 1: Add an infinite loop in the remote custom Function Module (adding a u201CDO. ENDDO.u201D statement at the start of the FM would be enough).
    STEP 2: Execute your program in the CRM system. The execution stops at the RFC call, because of the infinite loop.
    STEP 3: Now login to the ECC system and go to transaction SM51 select the process which is executing the RFC and navigate to the menu: u201CProgram/Session->Program->Debuggingu201D this triggers the debugger session in a separate window.
    Scenario 2: Calling a Standard RFC FM
    When we are debugging a standard program we cannot add the infinite loop, hence we cannot go to SM51 and debug the work process. The RFC destination for the ECC system has a User specified, the RFC function module gets executed using this users credentials. Usually the basis team set up the RFC user as non Dialog user, this does not allow debugging. Contact your Basis team and get this changed to a dialog user enabling you to debug RFC function calls via the normal debugger.
    Note: User name configured in the RFC destination (transaction SM59) 
    Note: User type for the RFC User (transaction SU01D)
    Hope this will be helpful..

  • Creating support desk messge from ECC "Help"

    Hi Experts,
    I am working in SP20 EHP1 of Sol Man.
    Kindly provide the configurations  & authorizations to be done in ECC system & in Sol Man system to create the support message from ECC "Help" menu.
    I have created the ZLFN transaction type (copy of SLFN). When i create the support message in ECC help menu, i need to create the support desk message with "ZLFN" transaction type.
    Your valuable inputs required.
    Regards
    Senthil

    Hi Naveen,
    Thanks for the SAP note.  Can you explain point no:5?
    1. The client was not completely created by the copy of Client 001
        I need to check this with basis team
    2. The BCOS_CUST table was not maintained correctly
        In BCOS_CUST (In satellite System), i have maintained the following:
        OSS_MSG  W SM_DM3CLNT110_BACK CUST620 1.0
    3. Missing authorizations for message creation (correct: roles copied from SAP_SV_FDB_NOTIF_BC_CREATE and SAP_SOL_SERVTRANS_CREATE or SAP_SUPPDESK_CREATE)
    I am having SAP_ALL authorization in Satellite system. Is these roles to be assigned in Sol Man also?
    4. incorrect action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO)
    For SLF1, i have assigned the action profile :SLFN0001_STANDARD_DNO. But inside this action profile, i have changed the values like PROCESS_TYPE to "ZLFN" & PARTNER_FCT_CREATOR to "ZLFN0002".
    5. Number ranges are not assigned correctly
    Can you explain this? For SLF1  & ZLFN , i have maintained "Internal" number ranges.
    6. The logical system is not defined
    Logical system for Sol Man & Satellite system  is created.
    7. Modification of the standard settings of the message type SLF1.
    I have changed the Text for Priority in SLF1.

  • Error While configuring SMS

    Hi All,
    I configured SMS by using transaction code SCOT and while sending the sms i am getting the below error
    "No Delivery to SMS:9*********** due to problem with communication connection.
    No delivery to SMS:9********** due to problem with communication connection
    Message no. XS839
    Diagnosis
    The message could not be delivered to recipient SMS:9*********due to a communication error.
    System Response
    Processing was completed as normal.
    Communication service with errors:           HTTP or HTTPS
    Parameter or error code used:
    CL_HTTP_CLIENT->RECEIVE Error Code: 1
    Additional information on the node used (in the system language of the node, if available):
    400 ICM_HTTP_CONNECTION_FAILED
    Procedure
    Check the parameters listed for the service. In particular, note the communication parameters. With HTTP/HTTPS, the problem is probably due to an incorrect URL or incorrect HTTP proxy settings.
    The error may, however, be temporary. If a SAPconnect retry has been defined for this node, the error may be removed automatically.
    Procedure for System Administration
    And i am using the below URL to send SMS
    http://112.110.32.178/BulkClient.jsp?
    senderID=&
    msisdn=91**********&
    msg=****&
    userid=404&
    pwd=hil-smsreci_addr=*&
    account=&
    password=&
    orig_addr=HIL&
    orig_name=Hil&
    Hi
    Request you guys to help me in this as this is stuck from long time.
    Waiting for replies....
    Thanks
    Mohammed

    This is a common error people get when configuring Repository Service in Admin Console...
    Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
    Or it could be parameter issues if it is linux...
    Please mark helpful this post

  • Replication of Material Sales status (with user values) from ECC to CRM

    Hi all,
    I 'm trying to find out how to replicate the  sales statuses of the material master data in ECC (in view "sales", field DChain spec. status, MKVE-VMSTA)  to the Material SAles statuses in CRM.
    The sales statuses in ECC have been maintained (via menu SPRO/logistics general/master data/basic settings/settings for key fields/DAta relevant to sales and distribution)) : new specific values have been added to the standard ones.
    Then, this customizing has been replicated to CRM via the DNL_CUST_PROD3 repliction object ( table TVMS).
    I have also created a user status profile with values in CRM with the same values, and assigned with the configurator the status profile to the screen, so the values are selectable in the sales status in CRM (in header).
    But, now, how can i replicate the sales statuses of the ECC materials to either :
    -the product status (header) in CRM, or
    -the sales status (distribution chain specific) in the assignment block of the Distribution-chain specific data  ?
    Is a specific development needed?
    there are some existing notes (623026, 428989, 495764), but not clear about what is possible in terms of replication of statuses
    thanks a lot

    It seems that there is no mapping between ECC and CRM sales area.
    If u want to download customer from ECC for that u have to mention the customer sales area in to the filter and then u have to start  down load from ECC.

  • CIF of transaction data from ECC to APO

    Hi,
    I wanted to know where we maintain the configuration for real time transfer of transaction from ECC to APO.
    I know for master data we have an option in CFC9 for real time/periodic transfer. Is there any similar config for transaction data too like sales orders etc.

    Hi Alok,
    To allow online transfer of changes to transaction data from SAP R/3 to SAP APO, you have to activate generally the BTEs in SAP R/3.
    This is done in R/3. This is the path:
    SPRO --> Integration with Other SAP Components --> Basic Settings for the Data Transfer --> Change Transfer --> Change Transfer for Transaction Data --> Activate Online Transfer Using BTE
    You can read about it here:
    Change Transfer for Transaction Data - Integration via APO Core Interface (CIF) - SAP Library
    Then of course you will need to generate and actiave your IModels.
    Kind Regards,
    Mariano

  • Unable to import IDoc from ECC to PI 7.1(ESR)

    Hi,
    I am creating an IDoc to File scenario in PI7.1 . I am trying to import the MATMAS IDoc from ECC to PI 7.1.So under the SWCV -> Imported Objects - > Wizard to import IDod/RFC opens -> I enter the ECC system login details -> But when I expand the IDoc node here,I find no IDoc from ECC ,moreover it throws me an error " component should be attached to some frame or dialog"
    Can you please suggest me as what is going wrong.
    Thanks,
    Venu

    Hi all,
    I am using PI 7.3
    When I Import object and passing parameter like application server, system number, uid and password.
    I got this error
            Unable to establish connection to R/3 system servertm_TM9_06 (system=00, client=001)
    Troubleshooting information: 
    Is the target system online?
    Check the connection data; server name and group fields are case-sensitive
    Tips for administrators (see configuration guide for details): 
    Does the user have sufficient authorization in the target system?
    Is the target system configured correctly in etc/services?
    See error logs for details    
    Please help me.

  • Publish a service from ECC 6.0 to Service Registry on PI 7.1

    Hello All,
    I've been trying to publish a service from ECC to the SR that has been configured on PI 7.1.
    I've followed the below steps to configure the connectivity from ECC to PI.
    1. On PI 7.1, created 2 destinations (UDDI_DESTINATION & CLASSIFICATION_DESTINATION) with http authentication (used admin user id with uddi_admin and service_registry_read_write roles assigned)
    2. On ECC, created an RFC destination of type G to point to PI 7.1 with path prefix /ESRegistryWS/BasicAuthConfig?wsdl&style=document.
    3. On ECC, assigned this RFC destination on LPCONFIG for proxy class CO_ESREGISTRY_WSSI and port LP_WORKPLACE.
    4. On ECC, WSPARAM created a new UDDI registry entry with logical port name LP_WORKPLACE.
    Next, I tried to publish a Z service from ECC (WSPUBLISH) to this new UDDI registry and I get a prompt to enter a user id and password for the service "/ESRegistryWS/BasicAuthConfig": I inputted the admin id which has uddi_admin and service_registry write access, but I got the below error:
    Exception raised during physical system publication. Code : ''
    Details:
    10150 Invalid Response code (401). Server
    <http://myhost.domainxyz.com: 50100/uddi/api/publish/> returned
    message <Unauthorized>.
    Spent a lot of time debugging and couldn't resolve it..Please help..

    Thanks, Raja.
    I've already assigned both roles (SERVICE_REGISTRY_READ_WRITE and UDDI_ADMIN) to an admin user ID on UME (PI 7.1). When I try to publish a service (Tx: WSPUBLISH) from ECC, immediately, I get a prompt to enter an id and password for the service "/ESRegistryWS/BasicAuthConfig" like I mentioned in the first post. I'm entering the ID I've configured on UME with those two roles assigned, but I get this error.
    10150 Invalid Response code (401). Server
    <http://myhost.domainxyz.com: 50100/uddi/api/publish/> returned
    message <Unauthorized>.
    Seems 100% an authorization error..but don't know what else to look for.
    Thanks for looking into this and any other thoughts, you might have.

  • Report on New vendor transfer from ECC to GTS

    Hi we have run the batch job daily basis to transfer new vendors from ECC to GTS system, my client want to know that list of the venodors(Business Partners) has been transfered today in GTS system on particular day to screening SPL. where i can see this, or any possible solution saying that get mail notification  to users - once vendors are transfered based on job batch runs.
    regards
    Satish

    Satish,
    You can see the log  in System Monitoring > Transfer logs for business partners or by executing the transaction:  /SAPSLL/PARTNER_APPL.
    However in order to see the required logs,  you need to  configure the  u2018Control Profile for Loggingu2019 in IMG.
    Hope this helps.

Maybe you are looking for