Configure Start conditions based on ibase\ and Customer Fields ??

Dear friends,
We have enchanced transaction types(document types) using Easy enchancement workbench (EEWB). Therefore we have a new tab(customer screen) in all the transaction types we use !!.
This tab has customer fields in it...
Now the requirement we have here is that we have to send Emails based on these customer fields and ibase and component.
How can i create start conditions based on the customer fields and ibase which are not present in object type BUS2000116(default) which is currently reffered while i create start conditions.
I know that i can create new object type(using swo1) and let it be have inherited supertype as BUS2000116 and then inside the new object type i can have my attributes( ibase and those customer fields) inside the new created object.
Is there any way of incalculating the customer fields and ibase \component in BUS2000116 ( by default it does not have these) ???
Assuming that i created new object type, how do i make use of this type while i am configuring conditions.
Any help would certainly be rewarded.

hi again,
Can anybody take some time out and guide me plz...

Similar Messages

Configure Action conditions based on Ibase

Hi,
In the transaction CRMC_ACTION_CONF I would like to define a condition for an action that tests the IBASE component of the current solman document?
How to define the condition based on Ibase?
Kindly help me out at the earliest.
Thx,
Waseem.

Hi,
You can create an action which will call a method that you will develop. This action should be called continuasly, ie you will not schedule any start conditions. In your method you will put your conditions, so the action will be called every time your z fields or your ibase will have certain values. In any other case your action will not be executed. Then, in the z method you developed, you will trigger the program to send automatically mails in the recipients you want to.
Regards
Costas

How to transfer SRM PO Condition Type and Custom fields to ECC?

Hi All,
I have a scenario to transfer SRM Line item condition types and few custom fields to ECC.
I have found the following things but structure 'CI_EKPODB' does not exists in ECC.
I am using 'SRM 5.00' and 'SAP ECC 6.0'.
NOTE: I have to transfer condition records when PO is getting created / modified.
1) Earlier I was planning to use BADI 'BBP_CREATE_BE_PO_NEW' in SRM and this will transfer the data to ECC in case of PO
    Creation.
               It contains the Condition fields to be passed to ECC.
But i am unable to implement the same, whenever i create implementation when i click 'Activate' its getting activate then after few seconds its getting deactivate, i think this is because this BADI is not allowed for multiple use and SAP has already made one implementation on the same.
2) I need to implement BADI 'BBP_ECS_PO_OUT_BADI' in SRM and 'BBP_PO_INBOUND_BADI' in ECC.
SRM BADI will pass verified field details to ECC as a custom fields
       It does not contains the Condition fields to be passed to ECC, so i was planning to pass the same as custom field(s).
ECC BADI 'BBP_PO_INBOUND_BADI' will be used to map the fields to correct place and this should work.
i need to modify the structures and pass all the custom fields (z-fields) - (CI_EKPODB but does not exists kindly suggest) as data.
Other required details:
      Transfer of PO does not supported by SAP for service PO's, any suggestion on the same?
Expecting quick reply from your end.
Thanks in advance.
Regards,
Hemant

Naresh,
Thanks for quick response.
My concern is this BADI 'BBP_CREATE_BE_PO_NEW' will trigger only in case of creation, not when PO is changes.
I have to transfer condition types and custom fields to ECC in both the case (create / change)
If i have to do this only in case of creation then i can pass Condition types / custom fields then i can use parameter 'CS_PO1_DOCUMENT' from method 'FILL_PO_INTERFACE1'.
this parameter contains 'IT_POCOND', 'IT_POCONDX' and 'IT_EXTENSIONIN' as parameter so my problem will be solved.
But i dont think this will trigger in both the cases and 2nd thing i cann't implement the BADI since its not marked for multiple use so i am unable to implement the same.
Kindly correct me if i am wrong.
Once again thanks for your reply.
Please suggest on the same.
Regards,
Hemant

Assign Scenarios and Customer Fields to Ledgers ?

Hello Sir,
We r using ECC 6.0
Which is right to assign to Scenario ?
IMG: Financial Accounting (New) => Financial Accounting Global Setting (New) => Ledger => Ledger => Assign Scenarios and Customer Fields to Ledgers
Select 0L (Leading Ledger) => Double click on Scenario
New Entries:   1) FIN_CCA                 Cost Center Update
                      2) FIN_GSBER          Business Area
                      3) FIN_PCA                 Profit Center Update
Why we assign?
What the purpose?
It is related to Document Splitting?
Thanks
J

Hi,
SAP provides totally 6 Scenarios and you cant increase these scenarios. Generally all the 6 scenarios will be assigned to the leading ledger, for non leading ledgers it depends on your business requirement for attaching the scenario. And coming to the functionality of the scenarios, as you asked yes it is regarding document splitting.
See when you post any document with additional account assignment like profit center, segment or business area. Based on the scenario you assigned to your leading ledger, these fields will be displayed in the general ledger view. If you did not assign the scenarios then that scenario wont be displayed in your general ledger view.
HOpe u understood.
regards
srikanth

MRP Generated production orders greys out Sales Order and Customer fields

Hi there,
The MRP generated production orders greys out the Sales Order and Customer fields for some reasons. These fields are really important as they link the production order to the sales order and the customer's purchase order. Could the SAP team please fix this or advise alternative way of getting the sales order and customer info on production order? Thanks.

Hello
MRP only poulated this fields in case the material master has been set up with a strategy group hich is make to order (normally 20). Otherwise MRP summarizes all the requirements from different Customer orders and creates a production order
Stephan

MRP - Sales order and customer fields grey-out

Hi there,
The Sales order and customer fields are grey-out for all MRP generated production orders. Can the SAP programmers please get this fixed? It should either read in the sales order number and the customer number or allow user to type in the sales order, just like the manually created production order.
cheers

Hello Gordon,
If production is make-to-order rather than make-to-stock, the MRP should read in the sales order number and the customer, since it is specific to the sales order. Even for make-to-stock production, where it cannot read in the specific sales order number, it should at least not grey out the field, don't you think so? By greying out the field, users are not allowed to type in the sales order number even when the production order directly relates to a particular sales order. As such, we are not able to link it back to the sales order where other info such as customer's purchase order, etc... can be found.
Could you please advise alternative way of linking MRP generated production orders to the sales orders? thanks

Create condition based on date and time

Hi everyone,
I'm using Discoverer Plus 10g. I want to create a condition in my worksheet using StageTime (consists of date and time) as the parameter, i.e. StageTime > StartTimeParameter and StageTime < EndTimeParameter.
I am able to create condition based on the date, but unable to create based on the time. I need to limit the data up to the hour, e.g.
StageTime > 11-NOV-2005 1 AM and StageTime < 11-NOV-2005 3 AM.
But so far I am unable to create a condition for the hour element.
I try to use this:
TO_DATE(TO_CHAR(:Start Date Parameter,'mm-dd-yyyy')||' '||:Start Hour||':00:00','mm-dd-yyyy hh24:mi:ss')
Start Date Parameter is selected using the date picker in Discoverer Plus
and the Start Hour is in the format '00' to '23'
but was prompted with the error: ORA-015858 a non numeric character was found where a numeric was expected.
Would really appreciate anyone's help on this! :)
Thanks,
Angeline :)

how about, if :Start Date Parameter is of type DATE and :Start Hour is of type varchar2(2) to simply do
:Start Date Parameter + to_number(:Start Hour)/24
?

Infoset based on logical database CRC and customer field wrongly calculated

Hello,
I'm building an info-set (SQ02) based on logical database CRC. My requirement is to calculate a value based on the start date of the capacity allocated to a work center (KAKO-BEGZT).
I defined a customer field (named FIELD1) with data type I, defined in R-KAKO_A with the following coding :
FIELD1 = R-KAKO_A + 100.
After having built the query (SQ01), the field returns correctly the value for FIELD1 only if an interval is defined in the capacity of the work center. Without that, FIELD1 is always null.
Can you help ?
Thank you

capacity header data is linked to table KAZY (interval) - if there is no relevant record there, your field1 gets nothing

Infoset Join condition on Key feilds and data fields

Hi Guys,
I have a requirement to biuld the Info set with join conditon on two DSO's the info objects which i am using in the JOin condition are defined as data fieds in one DSO and defined as key fields in another DSO, is it possible to define join condition on key fields and data fields.
The two info objects are
                       0AC_DOC_NO
                       0ITEM_NUM
These two info objects are defined as data fields in DSO :   0LIV_DS1   Invocie verificaion
                                                        key fields in DSO:    0FIAP_0o3 FI AP Line Item
Please suggest me is it possible to define join the condtion on the data fields and key feilds.
Thanks
Best regards
SG

Hi
yes you can create join, you will get any issue in reporting level.
example: Say i want to create Info Set on 0MATERIAL and Sales DSO.
In 0MATERIAL Info Object it is key filed, but in my DSO 0MATERIAL is data field.Still we can create
Creation of join is dependent on fields common in your source objects.
check out the below document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Sep 27, 2011 2:26 AM

Verity spider and custom fields

Has anyone customized the verity spider so that it populates the custom fields (custom1 through 4) or been able to add other colums (especially a date) to the result set that is returned from cfsearch.
I can populate the collections with the spider but have been unable to find anywhere documentation on how to add columns or populate the custom ones.
I thought I was on the right track with the style.sfl and style.ufl files, but have been unable to achieve the desired results.
Any help would be appreciated.

Hi,
I dont have access to SRM system but you can use enhancment concepts to enhance the standard component.
Refer http://wiki.sdn.sap.com/wiki/display/SRM/HidingtabofShoppingcartinSAPSRM7.0 which is having something simmilar requirment.
also refer http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81?QuickLink=index&overridelayout=true
I hope this will helpful for you to achive your requirments.
Thanks,
Chandra

Custom button and Custom fields in item data tab of SRM shopping cart

Hello All,
I am new to SRM 7.
There is a requirement to add a custom button and on the click of a button I need to pop up some custom fields , and
store it in SRM system.
The webdynpro component is /SAPSRM/WDC_UI_SC_DOFC_D1.
Can you pls tell me the process of adding, popup and transfer of the fields to SRM tables.
Should we adding some fileds in SPRO->Extensions and field control.
Kindly help.
Regards
Vinay

Hi,
I dont have access to SRM system but you can use enhancment concepts to enhance the standard component.
Refer http://wiki.sdn.sap.com/wiki/display/SRM/HidingtabofShoppingcartinSAPSRM7.0 which is having something simmilar requirment.
also refer http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81?QuickLink=index&overridelayout=true
I hope this will helpful for you to achive your requirments.
Thanks,
Chandra

Custom Reports and Custom Fields

When creating a custom report, it seems the only way to include custom fields and Extend CRM database fields is to include ALL of them in the Filter Criteria > Custom CRM Form Filter section. The business owner wants me to create a custom report that includes only a few custom fields but I'm not seeing how this is possible without including all of them from a specific web form.
Does anybody have suggestions as to how I can accomplish this?

Hi Rajeev,
To the best of My knowledge i know 3 process to Generate Report in E-Recruitment Pool.
1) Create an Infoset in SQ02 and assign the Role/UserGroup assignment as ERC_RECR and create Query in SQ01, Combining your E-Rec table & OM tables with variant and generate, you can see the Report in E-Rec(Login as Recruiter)->Reporting->Reporting Select your Custom Report and Execute.
2) Create a Custom Report with Transaction Code.
Create a IView in Portal and call the Transaction this is the
job of portal adminstrator.
3) Make an RFC (Remote Function Call) enabled Function Module with Importing & export parameters as per client requirements.
Code the logic and Retrive in Internal table in exporting parameter.
now Portal Job
Portal administrator will create a WebDynpro front end application for report selections screen or it can be any other portal development tool, for good look and feel, he will just call your RFC Function Module, by passing import parameters for fetching the internal table data he will display report on portal.
Rajeev,
standard process is via SAP Queries you only define the Querry with variant as defaulting the selections screen what ever the values in the backend,
only you select the report name from portal E-Rec and execute report their wont be any selections screen will be shown.
Coming to I-View yes what ever the report selections screen is their in backend it will be appering the same.
webdynpro your will your can desing like any thing.
coming to number colums not very sure.
yes create only OM reports also on E-Rec.
Cheer Up dear, if this resolves.
Thanks & regards
Ravi Kiran Sabba

BAPI_CONTRACT_CREATE and custom fields

Hi experts,
I'm using the BAPI "BAPI_CONTRACT_CREATE" to create a new contract, but I don't know how to fill the custom fields in the EKKO and EKPO table.
Can you give me some informations about this question?
Thanks and regards

Hi,
Hope the following threads will help you regarding your problem.
Re: Creating Contract from Quotation
Thanks.
Nitesh

Help BAPI_MATERIAL_SAVE_DATA and customer fields

Hello all,
I have a problem updating a customer defined field for mara using the BAPI_MATERIAL_SAVE_DATA. out extension of mara has fields that go over 240 chars in EXTENSIONIN-VALUEPART1. In fact the total length of the customer fields is 258. I put the 18 chars in VALUEPART2. However, the value for the 2 fields that I place in VALUEPART2 is not posted to mara. I checked that the 2 fields are concatenated in the final AMARA_UEB table passed to FM MATERIAL_MAINTAIN_DARK.
Has anyone had the same problem? I am in a 4.6 environment.
Thanks,

check this thread
Urgent Help required please! BAPI_MATERIAL_SAVEDATA Extension
check the notes mentioned in my post, and you need to add some entries to the table T130F
Edited by: Vijay Babu Dudla on Oct 3, 2008 11:57 PM

Conditional validation of date and text fields using javascript

How can we validate text and date field in sharepoint newform based on a check box.
i have used validation settings but it do not full fill my requirement.
i have checkbox with 4 values user can select all four values or can select any of the value. Based on the selected value i need to fire alert on a textbox and date field. Help is much appreciated.

Hey Dilip,
You can write your own javascript logic to achieve the same in content editor webpart on newform of list. try below links and let me know if you need further details.
using jquery validation plugin to validate
choice filed
JQuery validation-select required if checkbox checked
Thanks.

Configure Start conditions based on ibase\ and Customer Fields ??

Similar Messages

Maybe you are looking for