Configure STMS & transports as a single system
Hello,
I configured STMS as a single DEV system, without QA and PRD. I have a requirement to import the transports into the DEV system, after copying cofiles and datafiles from another dev system.
Is it possible to move another system transports into DEV System, configuring it as a single system landscape. If it is possible, kindly provide the steps.
Thanks,
Mohi
Hi
What you meant by "transport do not move" ?
Check here for Configuring Single Systems - Software Logistics - SAP Library
Also as per Matt's update, the same transport request also can be moved from command prompt or shell (on any OS);
log into sidadm
from Command prompt,
1) add request into buffer (this step may not be required if added earlier - as per Matt's update)
tp addtobuffer <transport number> <SID> pf=/usr/sap/trans/bin/<transport profile, i.e. TP_DOMAIN_<SINGLE SYSTEM SID>.PFL
2) then use below tp command to import the specific requests;
tp import <transport number> <SID> CLIENT=<client number> pf=/usr/sap/trans/bin/<transport profile, i.e. TP_DOMAIN_<SINGLE SYSTEM SID>.PFL
regards
Swami
Similar Messages
-
Transport request in single system landscape
Hi,
In single system landscape we are having only two clients (dev & prd), we are using T-code scc1 to transport a request from dev client to prd client.for this every time we are changing the production client settings.could anyone suggest me how to transport a request with out using scc1.
Thanks & Regards,
Reddy vHi,
you have only one system and two clients? Then you simply cannot use CMS functionality. Maybe it is possible to create transport target group and set up a client dependent transport control, but I've never tried it on one system landscape. Read more: http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
If I where you I'd use virtualization and install two SAP systems on virtual machines, then use standard 2 system landscape. It's much safer for your repository!!!
Regs,
FS -
Creating cofiles for single system configuration
Hi All,
we have sandbox system where it's congifured like single system in STMS.
when we try to release the requests it's showing local object request number relesed but i am unable to find the cofiles and data files at os end.
Since our system in configured as single system with out target system cofiles will not be created, but i have tried with virtual system and create the transport route but still unable to find the cofiles.
Is there any way to make cofiles available at OS end for single system configuration which having one physical system and one virtual system ....
Please suggest..
Thanks,
Subhash.GHello John,
Please go through my weblog:
<b>Configuring ESS in SAP Enterprise Portal 6.0>
Hope this may solve your problem.
Best Regards,
Srinivas. -
How can i configure STMS with out physical systems
Dear Experts ,
please solve my doubts
here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities
and i started some activities also
presently my doubt is in STMS configuration
here i have only one system (DOMINE CONTROLLER) and we need to other systems while configuration but we dont have other systems like quality and production how can i configure that systems in my landscape
this is my first implementation Experience please suggest me with some valuable suggestions
my doubts:
while creating systems we need to take for virtual systems or Extended systems
which transport routes can i prefer for Dev to Qly systemand also Qly to Prd
please reply me
RegardsHi,
If you have decided the SID's of the QUA and PRD systems then you can configure TMS with the virtual systems. Here are the steps to do so.
Login to the domain controller
Execute tcode STMS
Goto the menu overvie --> systems (Shift+F6)
SAP SYStems --> Create --> Virtual system
Enter the SID and description and then save ur entries.
Now the new virtual system will be created. Do the above for the others systems in the landscape.
Again execute STMS and then click SHIFT+F7. You will goto the transport route window. Now you can configure TMS for the systems in the list as usual.
Hope this helps.
Regards,
Varadharajan M -
Mass transport strategy but satellite system is configured for ChaRM
We want that all transports are automatically transported in the development test client.
We have calling a job with program TMS_BCI_START_SERVICE in the satellite system. But this program can only be used for mass transports and does not work when single transports strategy is activated.
Question:
Is there no solution to transport all this transports automatically in development test client via mass transport strategy if satellite system is configured for ChaRM scenario?
Thanks a lot in advance.
Regards UrsHello Michele,
Please, check the point 5 in the link below:
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
I think that this information can help you.
Best Regards,
Diego Fischer -
Best configuration for Transport System
Hi everyone
I like to know what is the best way to configure my transport system.
We have 2 server QAS and PRD in two distinct machines. SERVERQAS and SERVERPRD, accessible from network.
We need what when all transport request from QAS when released, all files must be copied to PRD server, today we need to use the button to adjust queue, but we can't use this option, we need what this process is automatic.
Thks.Hello Emerson,
You don't have Development system?
In a standard 3 system landscape, if dev, qua and prod systems are assigned with single domain controller and sharing same /usr/sap/trans then as soon as request is released from dev system, that will be available in qua buffer/import queue. Once it's successfully imported into qua system then it will be available in prod buffer/import queue for import. This is controlled by transport route.
Please read TMS configuration guide and take necessary actions.
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
Thanks,
Siva Kumar -
How to Configure MS Exchange 2007 CCR and SCC Cluster in a single system
Hi i want to configure ms-exchange 2007 server for both SCC and CCR. i have two Windows Server 2008 on running on my hyper-v. by using cluster on both hyper v i want to install MS-Exchange 2007 for both SCC and CCR. ideally one windows server 2008 has
Active Nodes and another one has passive nodes. please guide me as i am new in the fieldDuplicate of
http://social.technet.microsoft.com/Forums/exchange/en-US/edea43a1-59b4-4d26-9b41-76d0f4677095/how-to-configure-ms-exchange-2007-ccr-and-scc-cluster-in-a-single-system?forum=exchangesvrgenerallegacy#c6e08365-c01a-40aa-a8bc-94219757ef13
Blog |
Get Your Exchange Powershell Tip of the Day from here -
Transporting a request in single system landscape
Hi,
I our single system landscape, we are using the scc1 t-code to transport a request from dev client to prd client,then it showing a message like target client is productive and protected against client copy for this reason every time we are changing the production client settings. please give me suggestions how to transport a request in single system landscape with out using scc1 t-code.
Regards,
ReddyOlivier,
Are you sure SCC1 is just for client copy? I dont think so.
Client Copy transaction is SCCL for a local copy and SCC9 for remote client copy.
SCC1 allows to transport local requests within different clients, of course depending of what the transport request contains you can copy something simple or a lot of data (yes, I know, the title says something, but see the functionality).
I'm agree is not a good practice to have DEV and PRD in one server, but maybe he is using it for testing purposes? I saw different cases in the past and sometimes they had DEV and QA in one server, maybe this is the case.
Anyways, lets help him on his question.
Reddy, if you have any question, just post it.
Good luck, -
Configuring Transport route in Java system
Hi,
Pls let me know the steps to configuring transport routes in Java System.Hi,
Please look at the following pdf which tells you about CTS+ in portal with only java and non abap objects.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Rakesh -
Integration Directory Objects Transport Using the File System
Hi
I am trying to do the IR and ID Objects Transport Using the File system... I am able to Transport the IR Objects and IMport in to QA ... but when i try to Import ID objects its giving me the error...bcoz all the ID objects pointing to theSAP R/3 DEV system ( Interface Detremination, receiver determination ...)... do i have to config something in SLD ..so when i import the ID objects in to QA system it points to correct SAP R/3 QAS system...
and we are using single SLD for all the DEV , QAS and PRD system
SV
Edited by: S V on Oct 15, 2008 4:08 AMHi,
You will have to configure transport targets like for different business systems in your dev environment, there shouls be corresponding Business systems in QUA environment. For more details refer the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Thanks! -
Need Transport route for two systems(Urgent)
Hi All,
I have configured everthing like configuring domain controller and added to to domain controller.
Now i need to do below steps
I have Development (client) and Quality(client) in same system and Production as separate server.
I want to configure transport route from Development client to Quality client and from Quality client to Production Server.
Development Server SID is DEV ( Dev Client 100 and Quality Client 140) and Production Server SID is PRD
Transport route must be configured like below:
DEV( Dev client 100) -> DEV (QAS client 140) -> PRD
We are struck with this
Best Regards,
PratyushaHi Pratyusha,
As far as configuring Development and Quality systems concern, in one system is not suggested. I think you are aware of this.
However, I need some more information on your question like the operating systems which you are using in DEV/QAS and in PRD.
First, configure the Domain Controller in either DEV/QAS or PRD.
Irrespective of the OS, you need to maintain IP address along with the host name and fully qualified domain in the etc/hosts file.
for example DEV/QAS system ip address is 172.16.23.14 and host name is abc007, then you need to make an entry in etc/hosts file at the OS level as follows.
172.16.23.14 abc007 abc007.yourcompany.com
where in abc007.yourcompany.com is the fully qualified domain name.
Once you done this in both, DEV/QAS and PRD, systems, then configure 3 system landscape from STMS tcode in the other system which is not a Domain controller.
I hope this is helpful. Getin touch if you have any more questions or doubts.
Regards,
Satish.
Edited by: Satish Arram on Jul 31, 2008 2:06 PM -
hi all,
i m using oracle db 10.2.4 with ecc 6 on solaris 5.10 system , now want to configure STMS from our DEV to PRD system.
can anyone tell me that how to configure stms . Is it the same process like stms configuratin on Win OS
rgds
imran khanHi,
To configure the Transport System SAP recommends to have Global Tranpsport Directory.
1. First decside which system will be Transport Domain Controler: - Generally Development System.
2. Share the /usr/sap/trans directory Transport Domain Controler using NFS.
3. Now Login in 000 client as DDIC user & execute the t-code STMS.
4. It will ask to configure the Transport Domain Controler click on Ok.
5. Set the parameter DIR_TRANS on Transport Domain Client (Production/Quality System) to the path of NFS mounted directory.
6. Login to 000 client as DDIC user on Transport Domain Client (Production/Quality System) & execute STMS.
7. It will ask to include the system in Transport Domain, click on OK.
8. Now login again on Transport Domain Controler in 000 client & Approve Request.
9. In Transport Domain Controler click on Overview--> Transport Routes
10. Click on Configuration> Standard Configuration-> Select Appropriate to your Landscape.
11. Now configure your transport router DEV>QAS>PRD
Thanks,
Shambo -
STMS Transport Route Administration - Import Targets not modifiable.
Hello. I'm trying to configure cCTS for use with CHARM. I have created my system clusters and defined a consolidation and delivery route for the clusters. Now when I double click on my clusters in edit mode and navigate to the Import Targets tab, I am not able to modify this tab. I have been following the cCTS for CHARM and QGM Configuration guide.
Thanks Jessica
I'm also working with OSS SAP Support now to try and resolve my issue.
In short I can some up the problem and testing completed so far.
<b>To Start:</b>
The Server group removed old QA server from our SAP Landscape, therefore STMS Transport Route required rebuilding.
<b>Systems:</b>
We have a very complex system setup with SAP R3, CRM and BW systems. Each system has it's own server (Dev = R3D, CRD & BWD, QA Testing is now = R3T, CRT & BWT, Production = R3P, CRP & BWP) The Original QA servers are now being removed (R3Q, CRQ & BWQ)
CRD is the Transport Domain Controller, with transport bins located on CRD for R3D & BWD, CRT for R3T & BWT and CRP for R3P & BWP. (Firewalls and Server locations are the root cause for the different Trans Directories)
<b>Transport route:</b>
Transport route for SAP R3 was: R3D -> R3Q -> R3T & R3P (in a delivery group). The new Transport Route needs to be R3D -> R3T -> R3P.
<b>Main Problem now:</b> With the Transport Route configured like R3D -> R3T -> R3P, any new transport requests created in R3D moves to the R3T Import Queue automatically when the transport is released. Once the transport is successfully imported into R3T, it should automatically be added to the R3P Import Queue, but does not.
<b>Present work around:</b> I've reconfigured the Transport route to R3D -> R3T & R3P. Any tranport request once released, is successfully added to both the R3T & R3P Import Queues.
I have checked all SAPService<sid> OS users and passwords, ensured that the TMSADM user was recreated and working on each of the systems, used telnet to log onto each of the servers from each of the other servers at the OS level (to ensure it's not a landscape firewall security issue), I've also checked all RFC connections in the same manner (to ensure each system can reach the others), recreated the route from R3T to R3P as both a Consolidation and a Delivery type of route,
I will post any resolution found later.
Thanks for the help anyway -
Dear Experts,
We have completed the OS/DB Migrtion on SAP R3 4.6C 4.6D Kernel-2500.
After migration SE06-> Database copy migration -> Post installation processng-> we deleted the old STMS Settnigs
Now we have to configure STMS with Dev, QUA and PRD.
Configure the (DEV)Domain Controller Steps to configure (Note:Client want to maintain DEV system as domain controller)
1. Login to the system with sap* in client 000
2. Goto SE06.
3. Click Post installation activities
4. Goto STMS
5. It will ask for Domain controller name.
6. Enter DOMAIN_<SID> as domain controller name and enter the description.
7. Click Save button
Steps to add the other system (QUa & PRD) with Domain controller
1. Login to system with sap* in client 000
2. Goto SE06
3. Click Post installation activities
4. Goto STMS
5. It will ask for Domain controller name.
6. Enter System ID of the Domain controller
7. Enter DOMAIN_<SID> as domain controller name and enter the description.
8. Click Save button
9. Login to Domain controller system
10. STMS-> Overview -> System-> Select the system - SAP system -> Approve buton. Approve the added system.
Please confirm my above steps.
1.Kindly let me know any addional steps I have to do For OS/DB migration system related to STMS
2.Is it required to reset the TMSADM user. Please let me know which user is used to access from QUA & PRD system to the Dev(
KKK-dev\sapmnt\trans) mount folder
Thanks
MalaiHi Malai,
I can't confirm your instruction although I think that they look good. But I want to share something that happened to me in NW640/700, my transport routes was not replicated to my different systems.
Maybe you should check that the transport routes are correct after your copy?
I don't know if you have any routes at all but if you have you can find them in STMS -> Overview -> Transport Routes. If you need to update your routes in other systems than the controller you use Configuration -> Adjust with Controller (from within Transport Routes). In the controller you can define the routes manually.
Br Linus -
Configuring JCo3 Connection Pool with single sign on on non SAP Java server
Hi Everyone,
i have configured a connection pool on JBoss as per JCo3 Documentation and is working great.
Now I need help to configure this connection pool with single sign on so that RFc on SAP ECC systems are executed using end users credential rather than using single user name password used to configure JCo connection pool.
On SAP Java stack I am sure its possible within Java WebDynpro and i assume using JCA resource adapter. But what if we don't want to use SAP Java App server.
Any help will be appreciated.
Thanks,
Divyakumar JainEason, 你好!
I have exactly the same problem. Did you find a solution to this problem? If so, please let me know!
Maybe you are looking for
-
How do I convert an iTunes song into a ringtone from my 11.2 iTunes library and then sync it to my iPhone 5S? Is there a special process, and if so, what are the steps in order to do this? My computer is a Windows XP, btw. Any tips/suggestions/answer
-
I am still using Firefox on Windows XP
-
Error code = 0x40010015 when trying to open PDF in PS CS3
Greetings: I'm having a problem opening a PDF file in Photoshop. This is the error message: Error Opening the Portable Document File (PDF) Document. Error Code = 0x40010015 Searching the Adobe Forums, Knowledge Base, and even Google has turned up no
-
Hi , In R/3 system , Purchase groups are maintained for the material master and defaults to Requisition Like wise Whenever user create shopping cart in SRM , how the purchase groups is captured in the shopping cart. Regards Mani
-
Offline payment processing credit card payments failing
Hey guys...I've been struggling with this strange behavior on a clients site that I just can't seem to figure out. It's a basic shop through and through and we're using offline processing for his payments. I've never had any issues with this before