Configure the file adaptor so as to send sample XML message to integration

Hi all ,
I am totally new to XI.
I had done the configuration and now i want to test the scenario but i dont now how to do that .
please help me out how to do it.
its an urgent.
Thanks,
shuja

Hi,
I think you should post your question Process Integration (PI) & SOA Middleware.
Regards
Message was edited by:
        Shehryar Khan

Similar Messages

  • How to configure the file adaptor so as to send an sample XML message.

    Hi all ,
    I had done the configuration and now i want to test the scenario but i dont now how to do that ?.
    how to configure the file adaptor so as to send an sample XML message to the integration server ?.
    I am totally new to XI.
    please help me out how to do it.
    its an urgent.
    Thanks,
    shuja

    Hi,
    I think you should post your question Process Integration (PI) & SOA Middleware.
    Regards
    Message was edited by:
            Shehryar Khan

  • Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page

    Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page.

    Not sure about Utilities on your iPad. Do you mean the Settings app?
    First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

  • Configuring the file server in KM and access,edit the documents from it

    Hi friends,
      My requirement is to configure the file server where u will have all the structured and unstructured data stored here. So users can share the documents and create, edit ,save the documents from the file server itself.
    In KM what kind of file servers are there apart from the one it supports by default.
    Can anybody pls provide the configuration steps regarding how to configure the file server i KM.
    To configure the file server is webDAV protocol required?
    Points would be assigned for the helpful answer.
    Thanks in advance.
    Regards
    Sireesha.

    Dear Sireesha,
    Well KM supports mostly all the File server however we have some restrictions with Novell FS and Sharepoint Server from Microsoft. Like versions and other meta data have some issues.
    Alsothough to configure a File Server you need to first create a FS repository Manager. Details can be found in the help guide:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm">FS Repository Manager</a>
    Yes WebDAV protocol is required here.
    You can create WebDav RM as well.
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm">WEBDAV</a>
    The above links will help answer your queries.
    Regards
    Anjali

  • Configuring the file T3 servives using WLST in WLS 10.3

    Hi,
    I am trying to use WLST to configure the File T3 services in Weblogic 10.3.
    I can do it using the console.
    Please find the link for configuring through console:
    http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/filet3/TargetFileT3Services.html
    Can some one help me in configuring it through WLST?

    Hi,
    did you try to record the console configuration?

  • How can I change the file download time using Adobe Send? Adobe SendNow had a lot more options.

    How can I change the file download time using Adobe Send? Adobe SendNow had a lot more options.I don't see nay with Adobe Send.

    There isn't a feature in Adobe Send for setting and end-date for a file's availability. At any time, you can Unshare the file, however.

  • Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

    downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

    Let me give you a slightly different perspective than everyone else here.  You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network.  That's bad.  Very bad, for you, unless you absolutely trust everyone who lives within range of this network.  So stop doing it.
    As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information.  There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot.  Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

  • For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

    For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

    mike frischenmeyer
    What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
    Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
    know the details and troubleshoot to determined what caused the problem.
    1. Can you open a new project?
    2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
    for that project?
    3. Please review the Adobe document on troubleshooting damaged projects.
    Troubleshoot damaged projects | Adobe Premiere Elements
    4. What are the steps that you are using to reopen this saved closed project.
    a. File Menu/Open Project/Name of Project
    b. Other
    Please review and consider and then we can decide what next based on your further details and results..
    Thank you.
    ATR

  • I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be

    I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be told the Support Advisor no longer exists!! A blind loop. I need to have Photoshop CS6 installed...what do I do from here??

    The CC Cleaner Tool assumes the Akamai Download Manager is activated and it has not. It seems to be the missing file that triggers the error message. \in a previous re-install I was prompted to download & install the Akamai Download Manger, but not this time. Is there somewhere on the Adobe website that I can download it??

  • Sending an XML message and using proxy at receiver end

    hi all,
    please suggest me the steps to be followed in order to send a XML message and accepting this message using proxies.
    please help me out with detailed procedure.
    thanks+regards,
    Ujwalkumar

    Hi UjwalKumar,
    Follow this link:
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    This blog gives an excellent description of 'FILE to Proxy' scenario.
    what you need is XML to proxy...i.e. your scenario is very similar to this one...only diffrence is  that  , you wont be using FCC .since your source msg is in XML format..
    Hope this helps..
    Regards ,
    Sushil

  • Problem regarding Configuring the File Adapter

    Hi,
    I am making a Flat File to XML File Scenario. I have made all the Necessary developments and the Routings in the Integration Repository and the Integration Directory. The Sender Communication Channel Uses the Message Protocol "File Content Conversion". All the required steps have been done. We have installed the System and also the Basis Team has done the Post Installation Activities.
    <b> The Problem is that the "File is not getting picked up". When checking the RWB and henceforth the Adapter Monitoring we see that the File Adapter is disabled and the XI and the BC adapters are green. Previously we were on SP9 and now we are on SP14. The SAP Basis is at 640 and SP9 and the SAP ABAB is on 640 and SP9.</b>
      We are also unavailable to see the File Communication Channels that we have created. When the Tcode "sxi_cache is run it is giving an error that Cache not refreshed andon refreshing various times too the Cache is not Refreshed.
    Please Suggest us what we should do. Eagerly waiting for a reply and Thanking in Anticipation. Do we need to make some for configurations for that.
    Warm Regards
    Chakra and Somnath

    Hi Somnath,
    If the sender file adapter is up and running and even after that if you find some problem, the first thing you need to do is check if your file has been picked. The easiest way to check the same is to set the mode to DELETE, that is the file gets deleted as soon as it is picked. If your file has not been picked then the reasons for the same could be the following.
    - The path that you specified while configuring the sender communication channel would have been wrong.
    - While specifying the file name take care as it is case sensitive.
    - If you require content conversion then make sure that the parameters entered at the time of configuration are all correct.
    Please go thru the following links to get a very clear picture of your requirement.
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/44/6c9442c22d1131e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/607fe4756b654ab9f420097c29f6e9/frameset.htm
    Also make sure that your content conversion is in sequence wrt Datat Type Sturcture.
    Go through these blogs below for more detail on the same:
    /people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
    /people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
    I hope this would help you solve your problem.
    Regards,
    abhy
    Message was edited by: Abhy Thomas

  • Problem in configuring the File adapter communication channel in ID

    Dear All ,
    Scenario : <b>IDOC to Xml file</b>
    While configuring File adapter configuration channel , I mentioned the following :
    "File" in Adapter Type
              " File system (NFS) " IN Transport Protocol
              " File " in Message Protocol
    but nothing appears in Adapter Engine ???
    Can anybody help me to solve this problem . What could be the reason .
    Thanks in Advance
    Regards
    Prabhat

    Hi Prabhat
    Please elaborate as to in which format you need the file at the receiver's end.
    also, please go through this link:
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    Also there may be some error in sending Idocs, to review that, please go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
    I hope it helps,
    Thanks & Regards,
    Varun Joshi

  • Issue while fetching the file through *.extension by FTP sender file adapte

    Hello Experts,
    I am facing a issue while fetching the data through sender File adapter with  ' *.file extension' .I am illustarting the scenario as below .
    It is a simple scenarion of File to File inboumd scenarion.Here file is getting picked up from a third party system
    through FTP sender chanel and stored in a temp folder of PI through NFS rceiver file adapter .
        The problem is however I am getting, while picking the file with file name as "*.exo"(where exo is the file extension).
    But while fetching the file with particular name like"abcd_10032011*.exo"(file naming has been done by combination of abcd(always same)_currentdate(change according to current date)),file picked successfully .
    So here ,in the prior case file not getting picked up,but in later case it dose .
    Can anyone please let me know what might be the issue?

    Hi Sunit,
    Connect from your PI System to 3rd Party System (where are placed the Source Files)
    FTP <PartySystemHostName>
    eg. FTP 10.2.3.456 (then insert Username & Password to Login)
    Go to source directory
    cd \<SourceDirectory>
    eg. cd \donaldduck\directory\
    Execute a File List command
    ls -la *.<extension>
    eg. ls -la *.exo
    In this way you should be able to view all files with this extension (*.exo), the same action that Sap XI perform to pickup the file.
    Then, try to copy that file to your Local PI System (to check if there're some permissions issue):
    mget <filename>.exo
    eg. mpget File1_01012011.exo

  • How to save an e-mail as an .eml format and customize the name of the file, for example the name of the file would be "date, time, sender, title"?

    It would be fantastic if when saving my e-mails to my computer the file name could be customized to be something different that just the title of the message. As I suggested in the question if it could be set up to be "date, time, sender, title" it would be great, a lot of help when passing an .eml file between co-workers, or simply organizing your e-mails in folders. Is it possible and if yes, how is it done?

    Install [https://addons.mozilla.org/en-us/thunderbird/addon/importexporttools/ ImportExportTools] and adjust the Options (see picture).
    http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

  • Log4j - issue in configuring the file name for daily rolling file adapter

    We have configured the log4j properties. We want to create back-up of log file each hour. The file name of the log file is MyApp.log and as per the below configuration after each hour backup file is created as
    MyApp.log<<time>>
    but we want that file should be created in follogin format
    MyApp<<time>>.log
    Below are the log4j properties configured, please let us know, what should be the correct option to create the filename in desired format.
    # Set root logger level to DEBUG and its only appender to MyApp.
    log4j.rootLogger=DEBUG, MyApp
    log4j.appender.MyApp=org.apache.log4j.DailyRollingFileAppender
    log4j.appender.MyApp.File=D:/logs/MyApp.log
    log4j.appender.MyApp.DatePattern='.'yyyy-MM-dd-HH
    log4j.appender.MyApp.Append=true
    log4j.appender.MyApp.layout=org.apache.log4j.PatternLayout
    log4j.appender.MyApp.layout.ConversionPattern=[%d{yyyy-MM-dd} %d{HH:mm:ss z}] %m%n

    yes you can use /SAPDMC/SAP_LSMW_IMPORT_TEXTS via LSMW
    In the SAP system, there is no uniform rule for the structure of the actual text key Textname. However, in order to be able to maintain the structures and fields, you have to know what the structure of text name as well as the values for text object and text ID are.
    Procedure
           1.      Display a text of the required text type.
           2.      Branch to the editor.
           3.      Choose Goto > Header.
    The Text header dialog box appears.
    Result
    In the Text header dialog box, you gather the required information.

Maybe you are looking for