Configure Time Machine with FIOS MI424MR?

I can disable Wi-Fi on MI424MR but I don't know how to set it up as bridge?
Any help?

You can't turn off WiFi. You just configure the Time Capsule router to Join Another Network.

Similar Messages

  • Time machine with network drive?

    I heard I could use time machine with the hard drive I have connected to my airport extreme.  Problem is I can't get the disk to appear in the time machine set up window as an option

    Unfortunately Apple does not support Time Machine backups to a HDD attached to the AirPort Extreme USB port. Doing so is not recommended as most users who attempt this end up with corrupted backups over time. However, you could use a different backup solution with this configuration, just not Time Machine.

  • Hello, my mail is gone and I can't find it anywhere. Its not in library and I have not configured Time Machine yet. Help please?!

    Hello, my mail is gone and I can't find it anywhere. Its not in library and I have not configured Time Machine yet. Help please?!

    Use Find Any File, if the old messages might have been in a specific mailbox, to look for a file by the name of the mailbox to see if there are any larger versions of that mailbox.
    http://apps.tempel.org/FindAnyFile/
    If your Mail is indeed gone, you may be able to recover it with one of the data recovery tools here:
    https://discussions.apple.com/docs/DOC-1689
    But act quickly.  Every action while the computer is turned on weakens its chances of recovery.  There is a slim chance also your email provider may have tape backup from before you checked your messages and after it arrived at their server for certain messages.  You may want to ask them if that might have happened.

  • No configured time machine found

    Upgraded to Lion recently and since have had issues with time machine. Continuous amber flashing light, I have tried re-setting and when attempting to view through the utilities I get message no configured time machine found - airport utility will continue searching.
    Can anyone step me through what I should do please?

    I could say get rid of Lion.  but that is probably not acceptable.
    The airport utility in Lion isn't a lot of use.. so Apple released a real utility 5.6 for lion with some setting up stuff in it.
    You will probably need to reset the TC and redo the setup.. you might also need to plug in ethernet to accomplish this.
    Stability of the TC with Lion is also an issue.. but get started and see what happens.
    Your issue is with Time Capsule by the way.. ie the hardware box that is a router and hard disk.. not Time Machine the backup software in the computer.

  • Setup Time Capsule as wireless device and Time Machine with Ethernet?

    I'm running the latest version of Airport Utility (6.3.4) with a TC a1254 and Macbook Pro platinum late 2007.
      I have a modem/router Ryge model Wa41r.
      Ive tried everything I could find in the forums and in expert pages and can't configure my Time Capsule as a Wireless Device connected to the modem/router and Time Machine with Ethernet Cable.
      I tried letting it configure itself, it held the wifi signal for over 5 min then turned off. Never that way worked again.
      Then I configured with other examples seen in Apple communities and expert Apple pages, but it conflicted with my routers signal. I turned off the Wireless Lan Interface and it turned off the Ethernet cable with the connection as well. I tried giving my TC different IP address.
      So my Time Capsule  gives me this status in flicking amber: Internet connection and Conflicting DCHP Range. (when I connect to my Mac the Internet works)
      And strangely the wireless signal appears in my Macbook but not in my Android Phone.
      Works fine doing backups when asked via ethernet.
      Also when I go to check on it on Airport Utility in other wifi devices it appears but says "Device Not Found - device name- was previously part of your network. Check that is still in range...etc"

    I would like to help you but you need to clear up some things..
    A Time Capsule is plugged into the network by ethernet.. you back up to it using wireless or ethernet.. it should make no difference which.
    When you say this..
      Ive tried everything I could find in the forums and in expert pages and can't configure my Time Capsule as a Wireless Device connected to the modem/router and Time Machine with Ethernet Cable.
    I cannot understand.. The Time Capsule plugs into the main modem router.. and should be in bridge mode..
    Time Machine is not hardware.. it is  the backup software on the computer.. there is no way you can connect Time Machine with ethernet cable. .you can connect the computer with Ethernet Cable..
    But you need to clarify please.
    If you wish to connect TC to the Modem router by wireless this is not possible. It must connect by ethernet.
    You can connect your computer to it using either wireless or ethernet.
    And strangely the wireless signal appears in my Macbook but not in my Android Phone.
    It is likely the wireless name is not valid.
    Make sure all names are short, no spaces and pure alphanumeric. 2-20 characters.. Do not use the Apple recommended names.. they can be totally wrong.
    Also the password for wireless should be 8-20 characters but same rules.. pure alphanumeric mixed case and numbers.
    Start again.
    Factory reset the TC.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Plug it into the main router by ethernet.
    Do the setup via the airport utility in a Mac or iOS device.
    Follow the setup instructions above.
    Then you can connect to the TC LAN ports by ethernet or use wireless on the computer.
    Your modem WA41R. I cannot find details in English . .they are all Spanish so we may be having difficulty of language here.
    But if the modem is working as router the TC has to be in bridge mode.. it will not work properly in router mode.
    So you should see it set as bridge here.

  • Time Capsule and time machine with third party router

    Hi,
    This is the first time I use this site.
    I have over three years old Mackbook.
    APP has expired.
    Now I want to know how to set up time capsule in a new environment.
    I moved from Australian and Singapore.
    I was using Time Capsule and Airport Extreme in Australia.
    I have moved to Singapore.
    I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
    Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
    What I did so far is;
    Connected the time capsule to the power point.
    Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
    Apple Utility does not recognise Time Capsule.
    I prefer to use it wirelessly.
    There are only two USB cable ports installed.
    One is used to synchronize iPhone.
    Other is used for a printer.
    but if it is not possible, wired would be OK.
    MacBook 13 inch 2.0 GH Late 2006
    I hope that someone able to give me an answer for this.
    Cheers,
    morepubholidays

    In this case the apple support people reveal a truly poor understanding.
    You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
    IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
    If you already tried this and it didn't work.. try again.. it is the correct approach.
    You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
    So here is how to get the utility into your computer.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0
    Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
    Select this and update..
    Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
    Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

  • How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    So what is your question?
    If you forgot your encryption password:
    Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
    If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
    The above comes from here:
    http://support.apple.com/kb/HT4946

  • When I try to enter a time machine with Snow Leopard backups Lion I get an error code -6584 ... how to fix?

    Hi.
    I had a first gen time machine with backups all on Snow Leopard.
    This died (power supply), and I bought a new time capsule, because to fix the old one would cost nearly the same amount.
    Since, I have started using Lion, and backed up onto my new time capsule in Lion.
    Unfortunately, there was a file I deleted that I really need for a Logic Audio project, that is only present on the old time capsule.
    I got the old time capsule fixed, so it powers up. I even extended my current wireless network with it. I can see inside it -- all the data that I dragged onto its HD in the past is present, and the "Sparse Bundle" containing the data for the time capsule save-states is present too.
    Now, when I try to "Enter" my old time capsule, I get this error message:
    I tried entering the time machine via WiFi and via ethernet, to no avail.
    Can anyone help me to access these old save states on my old "snow leopard" time capsule?
    I was thinking maybe I need to try to access it from a machine with Snow Leopard?
    Please help.
    Thanks in advance.
    JM

    I have the same issue. Does anybody know why this has happened

  • Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

    Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port?  My current Time Machine has a total capacity of 1TB.  I'd like to double or triple its memory.  I don't want to use the external hard drive in lieu of the Time Capsule hard drive.  I'd like to use it in addition to.  Just don't know if/how it's possible.
    This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back.  So now I'm trying to introduce a clean slate to the mix.
    Thank you for your time!

    Well, what you mentioning is possible.  However, I don't know whether it's supported (as in, "easy to set up.").  Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule.  I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule.  Though I know some people have gotten it to work.
    Best I can say is to try it.  Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first).  If it works, you're all set.

  • Using Time MACHINE with a USB drive connected to an Airport Extreme

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Please click here:
    |
    Using Time Machine with an Airport Extreme AirDisk
    |
    Note: If you got here by clicking a link that looks like this:
    _. . . discussions.apple.com/thread.jspa?threadID=2299608#Q1_
    Note the number at the end, after the +*pound sign,+* (#) and click the corresponding item below:
    Please pardon the inconvenience.
    |
    QUESTIONS
    *Q1. Can I use the USB drive(s) for Time Machine backups AND other data?*
    *Q2. How do I set up Time Machine to back up to a USB drive connected to my Airport Extreme?*
    *Q3. How do I delete backups?*
    *Q4. How do I back-up my backups?*
    If you don't see your question here, try Time Machine - Frequently Asked Questions.
    |
    PROBLEMS
    *P1. The Backup disk image could not be created.*
    *P2. Time Machine could not complete the backup . . sparsebundle could not be accessed. (Error 109).*
    If you don't see your problem here, try Time Machine - Troubleshooting
    This is the 3rd version of this tip. It was submitted on May 16, 2010 by Pondini.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Hi, Nubz!
    Yes, I just saw that, and am still chuckling.
    Maybe that will mollify the Jive gods?
    Thanks again,
    Jim

  • Using Time Machine with a network Drive

    I recently bought a WD My Book Live network drive to use as my Time Machine backup. I was previously using a USB external HD for Time Machine with no problems. I have set up the new network drive but when I go in to Time Machine to select it as the drive to back up to, it is not showing up. The only drive I see is my old USB external HD. I have the latest firmware for the network drive and I am running Mac OSX10.5.8. Any suggestions?

    If you bought the WD in a USB enclosure it probably came formatted with NTFS (Windows). Time Machine can't use NTFS drives or SMB (Windows) network shares as a backup destination because that format does not allow the proper permissions to be set. If this is the case with your drive, open Disk Utility and reformat your new drive (NOT you system drive!!) with HFS+ aka 'Mac OS Extended (Journaled)' and then the drive should show up as a target selection in Time Machine.

  • How to use Time Machine with an external drive?

    Hi…I’m new to this, I hope someone can help me=)
    I’m trying to back up my Macbook Pro 10.6.8 using Time Machine with an external drive Seagate Backplus Slim. I’ve tried several solutions that I’ve found through different forums but still wouldn’t work.
    Every time I opened Time Machine, it has this appearance:
    Then when I click “Select backup Disk”, it goes on like this:
    And after I click “Set Up Time Capsule”, it has this:
    It keeps saying that it couldn’t find AirPort wireless, even though I have good WIFI connection.
    Anyone know what I should do? Please help….Thanks everyone

    Ayuphie ~ In your Time Machine Preferences panel, slide the OFF-ON switch to the ON position:

  • Setting Up Time Machine with a Partitioned External Hard Drive

    I recently bought a new external hard drive (MyPassport) and I was advised to partition it in order to keep my movies/music files separate from the rest of my files. So I partitioned it, but now I can't figure out how to set up the Time Machine with 2 separate hard drives. Is there a way to set it up so that I can use Time Machine for both, one for movies/music and one for everything else?

    I recently bought a new external hard drive (MyPassport) and I was advised to partition it in order to keep my movies/music files separate from the rest of my files. So I partitioned it, but now I can't figure out how to set up the Time Machine with 2 separate hard drives. Is there a way to set it up so that I can use Time Machine for both, one for movies/music and one for everything else?

  • Using time machine with uverse

    How to set up time machine with uverse

    Time Machine is software.....to allow your Mac to back up its contents to another hard drive.
    You may be asking about a Time Capsule......which is hardware.....a router with a built in hard drive that stores the Time Machine backups from a Mac.
    Maybe you could provide a bit more information to clarify what it is that you want to do.

  • Any way to configure time machine?

    Hello:
    I have heard that there is a way to configure time machine so you can specify how often to back up the hard drive. Any thoughts?
    I am not sure why Apple chose not to allow the user to specify the time interval. Right now, I have 150 GB on my hard drive and over 300 GB in backups.
    Thanks,
    P

    There is a third-party utility called TimeMachineScheduler - VersionTracker or MacUpdate.

Maybe you are looking for

  • Itunes wont import songs to a playlist

    I have a very weird problem in itunes 10 that just started.  I am still operating under os10.6.8.  i try to drag songs from a folder into a playlist i create.  the first time i do this there is no problem.  The second time i try with another batch of

  • Work status custom report

    Hi Gurus, I have built a work status custom report. The user was able to change status. When i run my custom EVDRE report no values are retrived for status, user and date/time stamp columns. I am using simple EVLCK function. I think something is bloc

  • How to change the Oracle logo in OBI 11.1.5

    I gone through some threads but i didn,t find some paths they specified in obi 11.1.5 version.and i went through the Oracle white paper PDFand some forums to change the skins and look & feel... But frankly i didn,t get that much idea ... and am new t

  • Event triggering before needed in  transaction VA02 as user exit is involve

    Hi All, My requirement was to put authorisation check using ABAP coding in VA02 transaction so that a particular user can delete change or modify a particular order . For this i had maintained a ztable in which authorisation was given to each user. F

  • Image item in multi-record block - PLEASE SOMEONE HELP !

    Hello everyone. I have a multi-record block with an image item that is not in teh table, is populated in the post-query trigger with a read_image_item, from a gif file. This block is child of another block. The problem is that the first records of th