Configure Training and Verification System with CUP

Hi gurus
Has anyone done this successfully?
Need tips.
I already have the configuration document but I believe the information is not sufficient. for example. The web Service URI for the system etc? We opened a ticket with SAP and the response is also not sufficient. This is the response
"Here is the how-to guide on the customer BPX that shows how to
set up a training and verification system. Copy and paste all three
lines into your browser.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b058a83c-038e-2b10-e9ab-c9b79f565edd?quicklink=index&overridelayout
=true
Here is the general link to all how-to guides and articles on the
SDN for GRC.
http://wiki.sdn.sap.com/wiki/display/BPX/Governance%2C+Risk%2
CandCompliance%28GRC%29How-To+Guides
After you have downloaded the guide, please close this message
when completed."
There is a snapshot on page 9 and 10 of the document. Any idea what that is?

Robert,
this is no plug&play configuration. Most likely your system does not even offer that web service, so you will have to get a programmer to write the interface.
CUP will call the web service and hand over the role information from the request, then the training system will have to return whether training has been passed for each role or not.
The guide is quite detailed - I suggest you talk to someone local who understands your environment and can help you creating the web service.
Frank.

Similar Messages

Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

Castle15 wrote:
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Cannot get the Apple.. what?
Model and actual device you are talking about?
Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

Integrating MDMP and Unicode systems with IDoc interfaces

Hi,
We are working on integrating SAP R/3 6.20 (MDMP) with SAP PI 7.0 SP10 (Unicode) system. The source will send MATMAS or CLFMAS IDocs with Thai / Japanese characters and PI should transform and post it to SAP ECC 5.0 Target system [IDoc to IDoc scenario].
( SAP R/3 Legacy 620 - Non-Unicode / MDMP ) |----> ( XI - Unicode) -> (ECC - Unicode)
Had a look at few SAP notes (745030 ,656350 and 613389) and it looks like there is no standard way/best practice to handle this scenario.
References:
1.PDF of TECHED Session ID: IM101 Dealing with Multi-Language Garbage?Data Lessons Learned
2.SAP Note 745030 - MDMP - Unicode Interface_Solution Overview.pdf
3.MDMP_Unicode_Transfer_final.doc from SAP Note 745030
4.SAP Note 656350 - Master Data Transfer UNICODE to MDMP Systems with ALE.pdf
5.SAP Note 613389 - ALE SAP system group with Unicode systems (Solution-2)
My understanding per SAP Notes: (Please correct me if I'm wrong)
a. For MDMP integraton we can't use Standard ALE Config instead we have to use Custom Configuration (IDoc collection setting in Partner profile &Scheduling RSEOUT002/RSEOUT00_MDMP and use Function module :IDOC_INBOUND_ASYNCHRONOUS_2 ).
b. The RFC Destinations should use proper logon langauage for correct MDMP IDoc transfer (For sending IDocs with Japanese character, the logon language should be JP).
c. If we want to transfer IDocs in more than one language we need to create multiple Partner profiles/RFC destinations each with specific logon language.
Please guide us in integrating these systems if you have done a similar integrations, following are my questions:
1] Is there any configuration change required at PI layer?
2] Do we need to install codepages in PI Unicode system for all languages used or Unicode system is capable of handling all the languages?
3] Is it necessary to install any SAP Add-on package in R/3 MDMP system inorder to support MDMP to Unicode data transfer?
3] If we want to send MATMAS/CLFMAS IDoc with Thai/Japanese characters from same system, what are the changes required at the Source system?
(Source may send MATMAS/CLFMAS IDoc with either Thai/Japanese characters but not both of them in a single IDoc)
4] Can we use regualr ALE & Partner profile settings for handling multi-byte characters or we need to use IDoc collection and RSEOUT002/RSEOUT00_MDMP report for transfer?
5] Is there any restrictions on the IDoc types (MATMAS,CLFMAS etc) supported in MDMP-Unicode integration solution.
5] Is there any best practice document available for this scenario?
6] Do we need to involve SAP AG for MDMP to Unicode system integrations(As per SAP Note: 656350) ?
Thanks and Regards,
Ananth

Hi Ananth,
as you have already mentioned, you need differents RFC destinations for each language. So you have to make sure, that the IDocs use the right destination according to there content.
If you have messages from PI to MDMP it is the same, you need different channels with different logon languages as well. You need an identifier in the message, that can be used for selecting the correct channel.
It should not be a restricting to any IDoc type, but it is not possible to post a message with different languages (which require different codepages) in one IDoc.
For correct conversion from a non unicode system to unicode, the codepages have to be installed in th OS of the PI server.
Regards
Stefan

Want to build an auto charging and discharging system with DAQ

Hi. I'm a freshman here. Now I have the DAQ-6009 and a labview software and some electronic elements. I wish to build a lithium ion battery cycles testing system (mainly for auto-switching) in order to observe the changes in the electrode. How can I build this charging and discharging system? The details of the battery are attached. Thank you!!
Attachments:
sanyo ml414 charging detaiils.pdf ‏75 KB

Hi freshman,
your spec sheet already mentions some resistors for loading and discharging your Li cell.
- With your USB6009 you can drive some transistors to switch between charging and discharging. You also have some AIs (analog inputs) to measure Li cell voltage as well as currents (when using some reasonable shunt resistors).
- Make an electronics sketch, read the manual of your USB6009 for it's specs and then grab your breadboard to build your electronics.
- Look at the examples coming with LabVIEW on how to switch DO signals and how to measure voltages (read the manual on that topics too!)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Archive / Delete in AE and Application System with Local IE

Hi:
When come to archive and deleting strategies, except the messages persisted in central Integation Engine, should we include messages in Adatper Engine and Local Integration Engine ?
Thanks
Liang

if you are busing windows server backup they should self manage the space, the exception would be if you are using the external drive for something else besides the backups and that is causing it to run out of space.
Your external device should have a "windowsimagebackup" folder that contains the backup since you have not been getting a backup in the past 3-4 night you may want to just wipe that folder and start fresh with a full backup. the drive space may be misleading
too, if the drives you are backing up don't have enough space to create a snapshot you will get space errors so you may want to make sure you have space available on the backup drives too.
If your exchange component on SBS has not backed up you may have accumulated transaction log files causing disk space to be too low. you can clear the log files but turning on circular logging cycle the unmounts exchange database and remount, then turn off
circular logging and cycle the database again. Circular logging can be found under the database setting in the exchange console.

ID User name when provisioning new user account in R/3 System with CUP

Hi,
Is it possible to configure somehow a rule in CUP for ID user names to be created in the backend system when direct auto provisioning is done?
Example: User_A creates a request for a new account in System SAP S1.
Such user will be created in S1 under ID "XXXX_User_A"
Many thanks in advance. Best regards,
Imanol

Imanol,
if you want building rules for new users you can user Netweaver Identity Management.
But I completely agree with Dylan - you really really want to try to have a SINGLE user ID in your systems for a person.
That's not only helpful for compliance, it's also useful for technical enhancements like Single Sign-On and many other things.
I usually try to link ActiveDirectory to CUP and retrieve user data, including the UserID from there.
Frank.

I want to configure C4C and Bw system without PI

Hi, We are trying to provide data from BW[enter some specifics like BO or WebI ] to cloud for customer(c4c). For this C4C has shared a webservice which requires data to be sent in a particular format.
Could anyone help me in understanding in what way can a webservice from external system be consumed so as to provide data in the above format?
I am new to BW and would be grateful for any help regarding Webservices in BO/BW.

Hi,
There are several VI's that are included with the motion driver for configuring your controller. They are located on the function pallete under Vision and Motion>>Ni-Motion>>Axis Configuration. Using these VI's you will be able to configure your axis. But why don't you want to use MAX? If you are new to LabVIEW I would suggest configuring and testing your motor in MAX first before you start programing. Once you have it working there you may want to look at several of the examples such as Simple One-Axis Move.vi. I hope this helps.
GG

BizTalkServer 2010 SFTP Adapter from CodePlex - Configuring send and receive locations with SSH public and private keys

Hi there,
I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
For Send port: 1. we would need to encrypt the file with our business partners public key
                      2. sign the file with our private key.
                      3. Send the file through to SSH client which eventually transfers to Remote server.
Receive port:   1. Connect to SSH Server with SSH-2 key and receive the file
                      2. Verify the file's digital signature agaisnt the Business partners PGP public key
                      3. Decrypt the file using our PGP Public key
Thanks in advance

Yes it is supported.
You can find its documentation in this link
You can find section X.509 Certificate Identity Keys
You can set public and private key in property SSH Identity thumbprint of send and receive port
I prefer to test it using client tool like
FileZilla or WinSCP then test it using sftp adapter
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Connecting mac and pc systems with usb

I've tried to connect with special usb data linq (or link) cable after installing drivers and software on both systems (in case of mac classic OS is neede and installed), both progarmmes on both systems work correctly - but no connection is poss, i.e. local machines are recognized, remote machines not. Can anyone help

Hi Henry
thanks for message.
Ethernet at this time is not poss cecause I have a conn with my son's Win PC (cross cable), ethernet of Mac I use for Internet via DSL - No network in the moment.
So I'm interested in using the USB conn...
The Product (cable with driver and pragramme software) is from Genesys Logic Inc.. The (Win) drivers name is usbhsb.sys, the programm for PC is USB GeneLink File Transfer 1.11A, for Mac it is Mac USB Bridge wich requests Classic System (9.2. wich I have installed within my 10.4.2 Tiger.
After installing both programmes on both mchines starts, but do not recognise each other systems, i.e. indicators on Mac both red, on PC indicator at first red, then yellow...
I have tested the cable and PC programme on two PCs and it works. So maybe: the cable as such is not recognised by the mac system, maybe it is an usb 2 standard (I'm not sure but afraid it must be 1.1)
Kind regards

Add any Video with a Video import and conversion system with choose skin

Would be great to have a drag and drop video system where Muse takes care of the required formats and resolution conversions for HTML5 and redundancy player for old browsers.
The current embedding system has massive downsides because lots of large blue chip companies block most video hosting sites like vimeo and Your Tube.
Also these sorts of embedded players can distract viewers off your page when they finnish with links to other videos.

You might want to try MPEG Streamclip (it's free) to convert the video; it is available here:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
I can't comment on your 1.83 GHz/iMovie 09 dilemma except to guess it may work but would be excruciatingly slow (my 2.16 GHz is slow!).

Callmanager 6.0 and billing System with CDR

Please, I need help in this case.
The customer need to use a third party billing system for the CDR of Callmanger 6.0.
The problem that the database of the Callmanager not SQL like the previous versions.
The engineer that will install the billing system asked me for two ways to help to collect the data from CDR:
first: to know the path of the database so he can go through it and collect the data by himself using the billing system
OR
Second: the CDR sent a report with all details every 1 min. to the server of the billing system and he will deal with it.
please I tried many steps but it is failed.
So if any know how to do this??
thanks so much

Hi Walid,
I found the solution of this case.
Just you will need a program to let your PC as a server and choose SFTP, not FTP.
You have to put in the program user name and password that you will use in the callmanager.
You will choose the path in the program any where you need.
Then turn on the SFTP server (the program) and stop any firewall that will close this port (SFTP port is 22)
Now we'll come to the important step, in the callmanager ,when you 'll add the the server billing system, it asks u to add the username and password ,add the same username and password u added in the sftp server .
In the path just put "\"
like that:
Directory path: \
that's it , and press add to see ...if it accept your add this means that it will work well
good luck

Data exchange b/w sap crm and external system with oracle adapter

Hi All,
I am new to SAP CRM. Previously , I worked on SAP R/3(ERP).
Our requirement is that we want connection b/w these 2 system (SAP and NON-SAP SYSTEM) through EAI layer and also Point to Point connection.
If anyone hav material related to this plz provide me the link.
hemlata

Hi,
Please refer to the URL below
http://www.oracle.com/technology/products/integration/adapters/dev_support.html
regards,
Vivek

Training and Event Management Integration with FICO

How Training & Event Management is integrated with FICO?
How it will be integrated and where?
Could you please put it in simple way?

Hi Rajesh,
Cost allocation:
Here it is possible to charge an employeeu2019s cost center with the fee for attending a business event (e.g. training course, workshop). The business event organizeru2019s cost center will be credited and the attendeeu2019s cost center will be debited.
Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
The costs incurred from actually holding a business event can be transferred from the resources cost center to the business event organizeru2019s cost.
Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
In SAP Configuration:
Training and Event Management > Integration->Billing and activity Allocation-->Activity Allocation and cost transfer posting.
Please do above configuration and create business events with or without resourses, in that you can maintain cost centre to post the expenditures .
Bhairavareddy

How to configure R/3 System with Load Balancing?

Hello,
I've created a Web DynPro Application and I would like to case an iView on it. According to SAP tutorials I first need to configure an R/3 System with Load Balancing.
My problem is how to configure the "WAS Host Name".
According to the tutorial:
WAS Host Name = <host>.<domain>:port (this corresponds to the Web Dynpro server location and the port on which it is running eg. PXYZ.wdf.sap.corp:50000.)
I am using NW 04 and my portal is running on this address:
http://ep6sp9test:50000/irj/portal
When I set the WAS Host Name to ep6sp9test:50000 the Test connection fails (I have privildges and created an alias and User mapping). What should I put at this field then?

Hi
I think you have to specify the HTTP port og the WAS running the R/3 system. The 50000 port is the HTTP port of your portal - not the R/3 system. You can see the HTTP port of the R/3 system using transactioncode SMICM - services in the R/3 system.
BR
Tom

Still necessary to manually install kernel modules with CUPS?

I'm just setting up my system with CUPS for printing. In the "Configuring CUPS" section of the wiki, you're instructed to install the appropriate kernel module with modprobe for using a usb or parallel port printer. With my usb printer and kernel 2.26.9 I found this is unnecessary. Plugging in the printer caused the module to automatically load. Is this because I'm using input hotplugging? And in any case, should the wiki be edited to reflect situations where loading the module manually is no longer necessary?

Sure, feel free to edit the page to reflect what you're seeing, which is udev autoloading the appropriate module when it detects the device. This functionality has been in place for a long time, and is not related to input hotplugging as used in xorg (not sure if that's what you're referring to above).

Configure Training and Verification System with CUP

Similar Messages

Maybe you are looking for