Configure VMServer and Migrate the SAP instances

Hi All,
We have already 5 instance installed on Windows 2008 SP2 Server (4 Processors & 64 GB RAM) and MS SQL Server 2008.
We are planning to configure VMWareand migrate all our instance to migrate to each V Machines
Please give some details, how to migrate all our instance into Virtual servers. I have gone through some of the documents, but i am not clear how to start.
Regards
Ponnusamy

Hi All,
We are planning for Hyper-V based virtualization, which is inbuilt feature of Windows 2008 R2 Server.
Here is my server Configurations and sap instances on that server
HDD u2013 6TB
RAM - 64 GB
OS u2013 Win 2K8 R2
DB u2013 SQL Server 2K8 R2
SAP SRM 7.0
SAP MDM 7.1
SAP NW EP 7.01
SAP ECC IDES 6.04
SAP CE 7.2
SAP PI7.1 EHP1
Here are my doubts
1. When we enable the Hyper-V role and configure VM, Is there any change happens in Network or LAN settings
2. We plan to Homogeneous system copy to move SAP instance to VM
2. will it possible to run sap applications on Host machine and VM parallely.
3. What points I have to consider before starting Configure VM
Regards
Ponnusamy

Similar Messages

  • How to configure GB P60s in the SAP Portal?

    How to configure GB P60s in the SAP Portal, so that they can be viewed and printed/reprinted by the employee themeselves? Will HMRC accept P60s printed on any stationeries? Also, Client does not want employee address to be available in the address section, but just the office location.

    Hello
    Please refer SAP note 1542870 -Electronic P60 ,where  HMRC have given employers the option of providing an electronic P60 to their employees.
    Please let us know incase you know any further information.
    Thanks and Kind Regards
    Ramana

  • Deletion of  data to reduce the size of the SAP instance

    Hi ,
    Could you please provide me steps of deletion of PO's Req's, Material Masters and any other data that might be plant specific in SAP for a new instance for a site .We want to keep the config and key master data elements but not all the archiveable data in the system.
    My information is not relating to archive but delete the data to reduce the size of the SAP instance and any financial data.
    Many thanks in advance,
    Krish.

    resolved

  • How to migrate the  SAP KM Content to MS SharePoint

    Hi
    How to migrate the  SAP KM Content to MS SharePoint
    Is there any links that can give me brief view on this

    we can integrate portal content to share point check this below link for[  Integrating SAP Portal Content into Microsoft SharePoint Portal Server|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6844e48d-0901-0010-b4b2-d5666689ca8b] and [Integrate Microsoft Sharepoint Services into Knowledge Management|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ba1508-27e7-2a10-2295-9dab5b78c614]. hope these helpful.
    regards
    Mahesh

  • The SAP Instance JC00 fails to start on aIX box

    Hi,
    I am installing SAP Netweaver on AIX box.
    The instalaltion process fails at the phase 33 of 34
    the SAP Instance JC00 fails to start
    if i chek the error fiel
    Trace of system startup/check of SAP System DON on Tue Dec 26 16:00:51 CST 2006
    Called command: /usr/sap/DON/SYS/exe/run/startsap
    Starting SAP Instance JC00
    SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
    Starting at 2006/12/26 16:00:51
    Startup Profile: "/usr/sap/DON/SYS/profile/START_JC00_pun-lpar-idm03"
    (655470) SETENV LD_LIBRARY_PATH=/usr/sap/DON/JC00/j2ee/os_libs:
    Setup Environment Variables
    (655470) SETENV SHLIB_PATH=/usr/sap/DON/JC00/j2ee/os_libs:
    (655470) SETENV LIBPATH=/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
    Execute Pre-Startup Commands
    (655470) Local: rm -f jc.sapDON_JC00
    (655470) Local: ln -s -f /usr/sap/DON/JC00/j2ee/os_libs/jcontrol jc.sapDON_JC00
    Starting Programs
    (651450) Starting: local jc.sapDON_JC00 pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    (655470) Waiting for Child Processes to terminate.
    (655470) **** 2006/12/26 16:00:56 Child 651450 terminated with Status 255 . ****
    (655470) **** No more Child Processes to wait for.
    (655470) Parent Shutdown at 2006/12/26 16:00:56
    Execute Post-Shutdown Commands
    (655470) Exiting with Return-Code 3. (No more child processes)
    Startup of Instance failed
    What can be the problem here
    Regards
    Manoj

    Hi Siddesh,
    Thanks for the response
    The trace is form the file dev_jcontrol located in "/usr/sap/DON/JC00/work" directory
    "dev_jcontrol" 111 lines, 5297 characters
    trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 610394
    system name : DON
    system nr.  : 00
    started at  : Tue Dec 26 19:12:38 2006
    arguments   :
        arg[00] : jc.sapDON_JC00
        arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
    rogram/config/sdm_jstartup.properties]
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    -> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
    Instance properties
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    :$
    trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 610394
    system name : DON
    system nr.  : 00
    started at  : Tue Dec 26 19:12:38 2006
    arguments   :
        arg[00] : jc.sapDON_JC00
        arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
    rogram/config/sdm_jstartup.properties]
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    -> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
    Instance properties
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    Worker nodes
    -> [00] sdm                  : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
    [Thr  1] Tue Dec 26 19:12:38 2006
    [Thr  1] SigISetDefaultAction : default handling for signal 20
    [Thr  1] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr  1] [Node: bootstrap] java home is set by profile parameter
            Java Home: /usr/java14_64
    JStartupIReadSection: read node properties [bootstrap]
    -> node name       : bootstrap
    -> node type       : bootstrap
    -> java path       : /usr/java14_64
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20060209 (SR4-1) (JIT enabled: jitc)
    -> java vm vendor  : Classic VM (IBM Corporation)
    -> java vm type    : <default>
    -> java vm cpu     : ppc64
    -> heap size       : 128M
    -> root path       : /usr/sap/DON/JC00/j2ee/cluster
    -> class path      : ./bootstrap/launcher.jar
    -> OS libs path    : /usr/sap/DON/JC00/j2ee/os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : /usr/sap/DON/JC00/j2ee/os_libs/jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0035316
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
    -> arg[00] = /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
    -> arg[01] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    -> arg[02] = -DSAPINFO=DON_00_bootstrap
    -> arg[03] = -file=/usr/sap/DON/JC00/j2ee/cluster/instance.properties
    -> arg[04] = -nodeName=bootstrap
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=9437188
    -> arg[07] = -jvmOutFile=/usr/sap/DON/JC00/work/jvm_bootstrap.out
    -> arg[08] = -stdOutFile=/usr/sap/DON/JC00/work/std_bootstrap.out
    -> arg[09] = -locOutFile=/usr/sap/DON/JC00/work/dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    -> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee/os_libs:/u
    sr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr/sap/DON/JC
    00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
    -> exe path = PATH=/usr/java14_64/bin:/usr/sap/DON/JC00/j2ee/os_libs:/oracle/DON/102_64/bin:/usr/java14_64/bin:/home/donadm:/usr/sap
    /DON/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/donadm/bin:/usr/bin/X11:/sbin:.
    [Thr  1] JStartupICreateProcess: fork process (pid 274544)
    [Thr  1] Tue Dec 26 19:12:55 2006
    [Thr  1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
    [Thr  1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
    [Thr  1] JControlCloseProgram: started (exitcode = -1)
    [Thr  1] JControlCloseProgram: good bye... (exitcode=-1)
    :q
    pun-lpar-idm03:donadm 68> ls -lt
    total 128
    -rw-rr   1 donadm   sapsys          329 Dec 26 19:12 INSTSTAT
    -rw-rr   1 donadm   sapsys         1323 Dec 26 19:12 sapstart.log
    -rw-rr   1 donadm   sapsys         5297 Dec 26 19:12 dev_jcontrol
    -rw-rr   1 donadm   sapsys         7556 Dec 26 19:12 dev_bootstrap
    -rw-rr   1 donadm   sapsys          615 Dec 26 19:12 std_bootstrap.out
    -rw-rr   1 donadm   sapsys          158 Dec 26 19:12 sapstart0.trc
    -rw-rr   1 donadm   sapsys          158 Dec 26 19:12 stderr0
    -rw-rr   1 donadm   sapsys            0 Dec 26 19:12 stdout0
    -rw-rr   1 donadm   sapsys          240 Dec 26 19:12 dev_sapstart
    -rw-rr   1 donadm   sapsys            0 Dec 26 19:12 dev_tp
    lrwxrwxrwx   1 donadm   sapsys           39 Dec 26 19:12 jc.sapDON_JC00 -> /usr/sap/DON/JC00/j2ee/os_libs/jcontrol
    -rw-rr   1 donadm   sapsys            0 Dec 26 19:11 dev_tp.old
    -rw-rr   1 donadm   sapsys         5519 Dec 26 17:32 dev_jcontrol.old
    -rw-rr   1 donadm   sapsys         7568 Dec 26 17:32 dev_bootstrap.old
    -rw-rr   1 donadm   sapsys         1045 Dec 26 17:32 dev_jcmon
    -rw-rr   1 donadm   sapsys         1045 Dec 26 17:32 dev_jcmon.old
    pun-lpar-idm03:donadm 69> vi dev_bootstrap
    "dev_bootstrap" 176 lines, 7556 characters
    trc file: "/usr/sap/DON/JC00/work/dev_bootstrap", trc level: 1, release: "640"
    node name   : bootstrap
    pid         : 274544
    system name : DON
    system nr.  : 00
    started at  : Tue Dec 26 19:12:38 2006
    arguments   :
        arg[00] : /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
        arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
        arg[02] : -DSAPINFO=DON_00_bootstrap
        arg[03] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties]
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    Instance properties
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    :$
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    [Thr 772] JLaunchIStartFunc: Thread 772 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: -Djco.jarm=1
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -Dsys.global.dir=/sapmnt/DON/global
    -> arg[  5]: -Dapplication.home=/usr/sap/DON/JC00/j2ee/os_libs
    -> arg[  6]: -Djava.class.path=/usr/sap/DON/JC00/j2ee/os_libs/jstartup.jar:./bootstrap/launcher.jar
    -> arg[  7]: -Djava.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee
    /os_libs:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr
    /sap/DON/JC00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
    -> arg[  8]: -Dmemory.manager=128M
    -> arg[  9]: -Xmx128M
    -> arg[ 10]: -DLoadBalanceRestricted=no
    -> arg[ 11]: -Djstartup.mode=BOOTSTRAP
    -> arg[ 12]: -Djstartup.ownProcessId=274544
    -> arg[ 13]: -Djstartup.ownHardwareId=F0052428966
    -> arg[ 14]: -Djstartup.whoami=bootstrap
    -> arg[ 15]: -Djstartup.debuggable=yes
    -> arg[ 16]: -DSAPINFO=DON_00_bootstrap
    -> arg[ 17]: -DSAPSTARTUP=1
    -> arg[ 18]: -DSAPSYSTEM=00
    -> arg[ 19]: -DSAPSYSTEMNAME=DON
    -> arg[ 20]: -DSAPMYNAME=pun-lpar-idm03_DON_00
    -> arg[ 21]: -DSAPDBHOST=
    -> arg[ 22]: -Dj2ee.dbhost=pun-lpar-idm03
    Signal 6 encountered.
    => 64 bit R/3 Kernel
    => 64 bit AIX Kernel
    => Heap limit      = unlimited
    => Stack limit     = unlimited
    => Core limit      = unlimited
    => File size limit = unlimited
    => Heap address  = 0x0x111179f20
    => Stack address = 0x111151b00
    => Stack low     =  0x11114f200
    => Stack high    =  0xffffffffffff470
    => Stack Trace:
            pthread_kill() at 0x90000000040d2b4
            praise() at 0x90000000040ccec
            raise() at 0x900000000049c50
            abort() at 0x900000000073eb0
            GetPropertiesMD() at 0x900000004267774
            ciCreateJVM() at 0x9000000042ff824
            JNI_CreateJavaVM() at 0x90000000429329c
            JHVM_LoadJavaVM() at 0x1000918d4
            JLaunchIStartFunc() at 0x10008bb14
            pthreadbody() at 0x9000000003f92d8
    !!! Invalid stack address encountered: 0x0
    !!! Stack corrupted.
    => CPU Registers:
         msr = 0xa00000000000d032     iar = 0x090000000040d2b4
         ctr = 0xffffffff00418400      lr = 0xffffffffffffffff
         xer = 0x00000000ffffffff      cr = 0x0000000000000000
         r00 = 0xffffffffffffffff     r01 = 0x0000000111151b00
         r02 = 0xffffffffffffffff     r03 = 0x0000000000000000
         r04 = 0xffffffffffffffff     r05 = 0xffffffffffffffff
         r06 = 0xffffffffffffffff     r07 = 0xffffffffffffffff
         r08 = 0xffffffffffffffff     r09 = 0xffffffffffffffff
         r10 = 0xffffffffffffffff     r11 = 0xffffffffffffffff
         r12 = 0xffffffffffffffff     r13 = 0x0000000111153994
         r14 = 0x0000000000000000     r15 = 0x0000000000000000
         r16 = 0x0000000000000000     r17 = 0x0000000000000000
         r18 = 0x0000000000000000     r19 = 0x0000000000000000
         r20 = 0x0000000000000000     r21 = 0x0000000000000000
         r22 = 0x0000000000000000     r23 = 0x0000000000000000
         r24 = 0x0000000000000000     r25 = 0x0000000000000000
         r26 = 0x0000000000000000     r27 = 0x09001000a1c9ea40
         r28 = 0x0000000111153994     r29 = 0x0000000000000006
         r30 = 0x0000000000000304     r31 = 0x0000000000000006
    [Thr 772] ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux_mt.c   836]
    :q
    pun-lpar-idm03:donadm 70> /usr/sbin/lsattr -E -l sys0 -a realmem
    realmem 1048576 Amount of usable physical memory in Kbytes False
    pun-lpar-idm03:donadm 71>
    pun-lpar-idm03:donadm 71>
    pun-lpar-idm03:donadm 71> pwd
    /usr/sap/DON/JC00/work
    pun-lpar-idm03:donadm 72> ls
    INSTSTAT           dev_jcmon          dev_jcontrol.old   dev_tp.old         sapstart0.trc      stdout0
    dev_bootstrap      dev_jcmon.old      dev_sapstart       jc.sapDON_JC00     std_bootstrap.out
    dev_bootstrap.old  dev_jcontrol       dev_tp             sapstart.log       stderr0
    pun-lpar-idm03:donadm 73> vi dev_jcontrol
    "dev_jcontrol" 111 lines, 5297 characters
    trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 610394
    system name : DON
    system nr.  : 00
    started at  : Tue Dec 26 19:12:38 2006
    arguments   :
        arg[00] : jc.sapDON_JC00
        arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
    rogram/config/sdm_jstartup.properties]
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
    -> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
    Instance properties
    -> ms host    : pun-lpar-idm03
    -> ms port    : 3601
    -> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    :$
    -> arg[04] = -nodeName=bootstrap
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=9437188
    -> arg[07] = -jvmOutFile=/usr/sap/DON/JC00/work/jvm_bootstrap.out
    -> arg[08] = -stdOutFile=/usr/sap/DON/JC00/work/std_bootstrap.out
    -> arg[09] = -locOutFile=/usr/sap/DON/JC00/work/dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    -> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee/os_libs:/u
    sr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr/sap/DON/JC
    00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
    -> exe path = PATH=/usr/java14_64/bin:/usr/sap/DON/JC00/j2ee/os_libs:/oracle/DON/102_64/bin:/usr/java14_64/bin:/home/donadm:/usr/sap
    /DON/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/donadm/bin:/usr/bin/X11:/sbin:.
    [Thr  1] JStartupICreateProcess: fork process (pid 274544)
    [Thr  1] Tue Dec 26 19:12:55 2006
    [Thr  1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
    [Thr  1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
    [Thr  1] JControlCloseProgram: started (exitcode = -1)
    [Thr  1] JControlCloseProgram: good bye... (exitcode=-1)

  • Migrating the SAP-Scripts to smartforma which are related to Finance(FI)

    Hi,
    Do we can migrate the SAP-Scripts to Smartform which are related to Finance(FI) & those SAP-Scripts are called by a standard print program (RFFOUS_C)
    Urgent answer need please!!!
    Thanks,

    Hello,
    Yes you can migrate script to smartform  there are different ways to migrate.
    Use program SF_MIGRATE..
    to migrate from scripts to smartforms.
    Reward if helpful.
    Viswam.

  • Create New Oracle R12 Server with multi nodes and migrate the Production Data on it ?

    Good Day,
    I have New Task and I don't know how to start.
    Am working on Oracle Application 12.1.3
    And Database 11.2.3
    OS Redhat Linux 6.1
    My Production Server have the database and the application on the same Server (Single node),
    I want to create another 2 Servers with same Operating system to separate the application and the Database to be each one on separate server (Multi Nodes),
    And Migrate the Production Server Data on It?
    And i need to know how many days it will takes because we are live now ?
    Regards 

    Install the OS on the new servers -- Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
    Use Rapid Clone to move the application/database to the new server.
    Rapid Clone Documentation Resources For Release 11i and 12 (Doc ID 799735.1)
    Cloning Oracle Applications Release 12 with Rapid Clone (Doc ID 406982.1)
    For the duration, it depends on the size of your application/database and how long it takes to copy the files.
    Thanks,
    Hussein

  • The logic board of my macbkpro 10.6.8 (OS ML) has died. I want t migrate info to another McbkPro (OS Snow Leopard) but is asking me to update to same OS. Can I update the latter to Mavericks and migrate the info from Mountain lion? thanks

    Hi i took my macbook pro to an apple store because it would not start correctly. The veredict was that the logic board was dead. As this is a very expensive item to replace, I have decided I will buy a new one but I am currently overseas, and will wait a couple of months when I get back home. This is a macbookpro 15 inch early 2011, running on Mountain Lion OS. I have another macbook pro 13inch running on snow leopard. At the store we tried to migrate the info using an ethernet cable (using the "T" command on startup) but the system asked for an update of the OS. The guy at the store told me I had to update the OS so that the two macs would be on the same OS - mountain Lion. As the newest (and free) OS is Mavericks, I wonder wheather I coud update the 13 inch mac to mavericks and perform the migration. The guy at the store was explicit to say that if the OS were different it would not work. But reading on the apple website it seems that mavericks support this kind of migration altough is not explicit about it. Can you please help?
    thanks

    Hi BobRz,
    As this is a new issue for me, I believe I had the incorrect approach, maybe you can help me. What I want to do is recover a few files in my desktop, and some information i had on the iCal application and the Mail application as well.As I do not want to do a full migration into this computer (which is not mine) I believe that starting the damaged MBP in Target mode should allow me to search and cop the files I need. But:
    1. Can I open the Ical and mail apps to look for the info I need while reading it as an external HD  ?
    2. Do the target machine (my friends) still need to be updated to ML o Mavs so that it recognizes my MBP as an external drive if starting it in Target mode ? (no migration assistant)
    Thanks.

  • How to Start and Stop the SAP System

    Hi,
    I have installed "Sneak Preview"; Searched for start and stop scripts but there are more than one script which has named start.bat and stop.bat. Moreover, I searched the documents which comes with Sneak Preview but could find useful instruction there either.
    Question: Could you please point me to the documentation where it explains the starting and stopping SAP, for Sneak Preview?
    Thanks in advance
    Jawad Kakar

    Please help me by showing action plan for stop sap , offline backup and then start sap.
    i am little bit confuse How to start and stop SAP on cluster for offline backup
    Below are the systems name with host name , please explain me in sequence
    Systems name                                   Hostname
    # Hope SAP ERP Prod DB Primary       gsgbbux860
    # Hope SAP ERP Prod DB Standby      gsgbbux861
    # Hope SAP ERP Prod Cluster              gsgbbux862
    # Hope SAP ERP App 1                       gsgbbux864
    # Hope SAP ERP App 2                       gsgbbux865
    Thanks in advance
    Zaheer

  • Import ID Configuration Scenarios and keep the same Business System names

    Hi Guys,
    Is it possible to transport ID Configuration Scenarios Objects between 2 XI systems and keep the same names for both sender and receiver Business Systems ? That is, to skip the SLD lookup for transport Source and Transport Targets systems ?
    I tried to create the same Business Systems under the same name twice, but this was not possible. Any ideas ?
    The reason is that I want to transport all the objects from one XI DEV server to another XI DEV server.
    Thank you,
    Best Regards,
    Evaggelos Gkatzios

    Hi,
    We have done same but with bit of manual work (without Transport).
    Create SLD object in target system with same name as in Souce XI system SLD.
    IR & ID was exported using TPZ files from Source system & were imported in Target system.
    It used same object names in both XI systems.
    Regards
    Sushil

  • Unable to start the SAP instance - work processes are terminated

    Hello,
    We are implementing SAP ECC 6.0 on iSeries, i5/OS V5R4.
    The application server & the database server are implemented on one centralized physical iSeries server.
    We recently attempted to copy one SAP system (DEV) from one iSeries server to another, through restoring from an Entire System backup.
    After successfully conducting the restore onto the new (destination) iSeries server, and conducting all the necessary host name changes to be the same as the host name of the source system, we encountered a problem when trying to start the SAP : all the jobs under sub-system R3_00 are started, except the jobs constituting the SAP work processes; i.e. WP00, WP01, …etc.
    The following is the file holding the SAP start log :
    /usr/sap/<SID>/DVEBMGS00/work/sapstart.log
    SAP-R/3-Startup Program Rel 700 V1.8 (2003/04/24)                  
    Starting at 2008/04/07 13:55:49                                    
    Startup Profile: "/usr/sap/PRO/SYS/profile/START_DVEBMGS00_MASAPPRO"
    Execute Pre-Startup Commands                                       
    (47) Local: /usr/sap/PRO/SYS/exe/run/cleanipc 00 remove            
    (47) Executing "/usr/sap/PRO/SYS/exe/run/cleanipc 00 remove"...    
    (47) Okay!                                                         
    (47) Local: CLRLIB LIB(R3WRK00)                                    
    (47) Executing CL command "CLRLIB LIB(R3WRK00)"...                 
    (47) Okay!                                                                     
    (47) Local: /usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n
    (47) Executing "/usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n"...
    (47) Okay!                                                                               
    Starting Programs                                                              
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/saposcol" asynchronously...    
    (47) Okay, child's pid=52.                                                     
    (52) Starting: local /usr/sap/PRO/SYS/exe/run/saposcol                         
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
    (47) Okay, child's pid=53.                                                     
    (53) Starting: local /usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
    (47) Okay, child's pid=54.                                                     
    (54) Starting: local /usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
    (47) Okay, child's pid=55.                                                     
    (55) Starting: local /usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
    (47) Okay, child's pid=56.                                                     
    (56) Starting: local /usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
    (47) Spawning program "/usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
    (47) Okay, child's pid=57.                                                     
    (57) Starting: local /usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
    (47) Waiting for Child Processes to terminate.                                 
    (47) **** 2008/04/07 13:55:56 Child 53 terminated with Status 0 . ****         
    (47) **** 2008/04/07 13:56:25 Child 54 terminated with Status 0 . **** 
    Thank you in advance for your cooperation.
    Best regards.
    Reda Khalifa

    Hello,
    I did delete all the SAP-related SQL Packages, using the command : DLTR3PKG, then IPL the server, then try to start the SAP system, but with no success (the same previous status)
    As per your request, the following are contents of the four log files :
    dev_disp.new, dev_disp, dev_w0, dev_rd :
    trc file: "dev_disp.new", trc level: 1, release: "700"
    sysno      00
    sid        PRO
    systemid   324 (IBM iSeries with OS400)
    relno      7000
    patchlevel 0
    patchno    98
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        52
    Tue Apr  8 13:47:32 2008
    kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 52) [dpxxdisp.c   1239]
         shared lib "dw_xml.so" version 98 successfully loaded
         shared lib "dw_xtc.so" version 98 successfully loaded
         shared lib "dw_stl.so" version 98 successfully loaded
         shared lib "dw_gui.so" version 98 successfully loaded
         shared lib "dw_mdm.so" version 98 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    WARNING => DpNetCheck: NiServToNo(sapdp00) failed (rc=-3)
    ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c  5217]
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5355]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >MASAPPRO_PRO_00                         <
    DpShMCreate: sizeof(wp_adm)          50960     (1456)
    DpShMCreate: sizeof(tm_adm)          27955928     (27928)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
    DpShMCreate: sizeof(comm_adm)          548064     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1848)
    DpShMCreate: sizeof(wall_adm)          (200056/174328/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 0x700000080000000, size: 28969592)
    DpShMCreate: allocated sys_adm at 0x700000080000000
    DpShMCreate: allocated wp_adm at 0x700000080001ee8
    DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
    DpShMCreate: allocated tm_adm at 0x70000008000e658
    DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
    DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
    DpShMCreate: allocated comm_adm at 0x700000081abf630
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
    DpShMCreate: allocated gw_adm at 0x700000081b45390
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0x700000081b453c0
    DpShMCreate: allocated wall_adm at 0x700000081b453c8
    Tue Apr  8 13:47:33 2008
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ERROR => DpIPCInit2: NiServToNo failed ((null)--3) [dpxxtool2.c  511]
    DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Apr  8 13:47:43 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Tue Apr  8 11:47:43 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    0 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    1 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    2 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    3 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    4 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    5 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    6 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    7 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    8 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    9 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    10 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    11 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    12 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    13 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    14 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    15 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    16 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    17 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    18 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    19 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    20 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    21 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    22 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    23 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    24 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    25 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    26 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    27 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    28 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    29 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    30 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    31 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    32 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    33 ?         -1 Free          no      0   0             0                                                             
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    34 ?         -1 Free          no      0   0             0                                                             
    Dispatcher Queue Statistics               Tue Apr  8 11:47:43 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c   2032]
    Dump of tm_adm structure:               Tue Apr  8 11:47:43 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Tue Apr  8 11:47:43 2008
    =============================
    Slots: 300, Used: 0, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Tue Apr  8 13:47:48 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >MASAPPRO_PRO_00                         < (normal)
    DpJ2eeDisableRestart
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect: shmat key 57 prot 3/0 done
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect: shmat key 57 prot 1/4096 done
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10923]
    Stop work processes
    Terminate gui connections
    wait for end of work processes
    not attached to the message server
    cleanup EM
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ShmCreate( 76, 0, 2, 0x0x1808c5508 )
    ShmKeyPermission( 76 ) = 0777 (octal)
    cleanup event management
    cleanup shared memory/semaphores
    ShmCleanup SHM_SYS_ADM_KEY
    ShmCleanup( 1 )
    ShmCreate( 1, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 1, 3 )
    ShmProtect: shmat key 1 prot 3/0 done
    ShmCreate( 1, 0, 2, -> 0x0x700000070000000 )
    ShmCleanup SHM_DP_ADM_KEY
    ShmCleanup( 2 )
    ShmCreate( 2, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 2, 3 )
    ShmProtect: shmat key 2 prot 3/0 done
    ShmCreate( 2, 0, 2, -> 0x0x700000080000000 )
    ShmCleanup SHM_DP_CA_KEY
    ShmCleanup( 3 )
    ShmCreate( 3, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 3, 3 )
    ShmProtect: shmat key 3 prot 3/0 done
    ShmCreate( 3, 0, 2, -> 0x0x700000090000000 )
    ShmCleanup SHM_PF_KEY
    ShmCleanup( 4 )
    ShmCreate( 4, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 4 ) = 0777 (octal)
    ShmCleanup SHM_PRES_BUF
    ShmCleanup( 14 )
    ShmCreate( 14, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 14 ) = 0777 (octal)
    ShmCleanup SHM_CALI_BUFFER
    ShmCleanup( 11 )
    ShmCreate( 11, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 11 ) = 0777 (octal)
    ShmCleanup SHM_DB_TBUFF
    ShmCleanup( 19 )
    ShmCreate( 19, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 19 ) = 0777 (octal)
    ShmCleanup SHM_DB_TBUFF_P
    ShmCleanup( 33 )
    ShmCreate( 33, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 33 ) = 0777 (octal)
    ShmCleanup SHM_DB_STBUFF
    ShmCleanup( 41 )
    ShmCreate( 41, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 41 ) = 0777 (octal)
    ShmCleanup SHM_DB_TTBUFF
    ShmCleanup( 42 )
    ShmCreate( 42, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 42 ) = 0777 (octal)
    ShmCleanup SHM_DB_FTBUFF
    ShmCleanup( 43 )
    ShmCreate( 43, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 43 ) = 0777 (octal)
    ShmCleanup SHM_DB_SNTBUFF
    ShmCleanup( 45 )
    ShmCreate( 45, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 45 ) = 0777 (octal)
    ShmCleanup SHM_DB_IRBUFF
    ShmCleanup( 44 )
    ShmCreate( 44, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 44 ) = 0777 (octal)
    ShmCleanup SHM_DB_OBJ_BUFFER
    ShmCleanup( 54 )
    ShmCreate( 54, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 54 ) = 0777 (octal)
    ShmCleanup SHM_DB_SYNC
    ShmCleanup( 46 )
    ShmCreate( 46, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 46 ) = 0777 (octal)
    ShmCleanup SHM_DB_CUA_BUFFER
    ShmCleanup( 47 )
    ShmCreate( 47, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 47 ) = 0777 (octal)
    ShmCleanup SHM_DB_OTR_BUFFER
    ShmCleanup( 64 )
    ShmCreate( 64, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 64 ) = 0777 (octal)
    ShmCleanup SHM_DB_ESM_BUFFER
    ShmCleanup( 65 )
    ShmCreate( 65, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 65 ) = 0777 (octal)
    ShmCleanup SHM_ROLL_AREA_KEY
    ShmCleanup( 9 )
    ShmCreate( 9, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 9 ) = 0777 (octal)
    ShmCleanup SHM_PAGING_AREA_KEY
    ShmCleanup( 8 )
    ShmCreate( 8, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 8 ) = 0777 (octal)
    ShmCleanup SHM_ROLL_ADM_KEY
    ShmCleanup( 17 )
    ShmCreate( 17, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 17 ) = 0777 (octal)
    ShmCleanup SHM_PAGING_ADM_KEY
    ShmCleanup( 18 )
    ShmCreate( 18, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 18 ) = 0777 (octal)
    ShmCleanup SHM_PXA_KEY
    ShmCleanup( 6 )
    ShmCreate( 6, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 6 ) = 0777 (octal)
    ShmCleanup SHM_ENQ_TABLE_KEY
    ShmCleanup( 34 )
    ShmCreate( 34, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 34 ) = 0777 (octal)
    ShmCleanup SHM_ENQID_KEY
    ShmCleanup( 58 )
    ShmCreate( 58, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 58 ) = 0777 (octal)
    ShmCleanup SHM_VB_ADM_KEY
    ShmCleanup( 7 )
    ShmCreate( 7, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 7 ) = 0777 (octal)
    ShmCleanup SHM_DB_POOL
    ShmCleanup( 40 )
    ShmCreate( 40, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 40 ) = 0777 (octal)
    ShmCleanup SHM_ES2_ADM
    ShmCleanup( 76 )
    ShmCreate( 76, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 76 ) = 0777 (octal)
    ShmCleanup SHM_EM_ADM
    ShmCleanup( 51 )
    ShmCreate( 51, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 51 ) = 0777 (octal)
    ShmCleanup SHM_EM2_ADM
    ShmCleanup( 77 )
    ShmCreate( 77, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 77 ) = 0777 (octal)
    ShmCleanup SHM_EG2_ADM
    ShmCleanup( 78 )
    ShmCreate( 78, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 78 ) = 0777 (octal)
    ShmCleanup SHM_MSBUF
    ShmCleanup( 52 )
    ShmCreate( 52, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 52, 3 )
    ShmProtect: shmat key 52 prot 3/0 done
    ShmCreate( 52, 0, 2, -> 0x0x7000000a0000000 )
    ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
    ShmCleanup( 30 )
    ShmCreate( 30, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 30 ) = 0777 (octal)
    ShmCleanup SHM_JAVA
    ShmCleanup( 70 )
    ShmCreate( 70, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 70 ) = 0777 (octal)
    ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
    ShmCleanup( 56 )
    ShmCreate( 56, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 56 ) = 0777 (octal)
    ShmCleanup SHM_POOL_0
    ShmCleanup( 10 )
    ShmCreate( 10, 0, 2, 0x0xfffffffffffe990 )
    ShmKeyPermission( 10 ) = 0777 (octal)
    ShmCleanup SHM_PROFILE
    ShmCleanup( 57 )
    ShmCreate( 57, 0, 2, 0x0xfffffffffffe990 )
    ShmProtect( 57, 3 )
    ShmProtect: shmat key 57 prot 3/0 done
    ShmCreate( 57, 0, 2, -> 0x0x700000020000000 )
    MiCleanup:
    ShmCleanup( 62 )
    ShmCreate( 62, 0, 2, 0x0xfffffffffffe900 )
    ShmKeyPermission( 62 ) = 0777 (octal)
    ERROR => ShmCleanup(62) failed 3 [mpixx.c      3239]
    MpiCleanup() -> 1
    removing Semaphore-Management
    Sem2Lock: LockObjPtr = 0x700000030000158, Yield = 1
    ERROR => e=2 semctl(4,0,IPC_RMID,..) (2: No such file or directory) [semux.c      2098]
    removing request queue
    ShmCleanup( 31 )
    ShmCreate( 31, 0, 2, 0x0xfffffffffffe910 )
    ShmKeyPermission( 31 ) = 0777 (octal)
    ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c   431]
    closing connect handles (dgm + tcp)
    ***LOG Q05=> DpHalt, DPStop ( 52) [dpxxdisp.c   10594]
    shutdown completed - server stopped ***
    Good Bye .....
    trc file: "dev_disp.new", trc level: 1, release: "700"
    sysno      00
    sid        PRO
    systemid   324 (IBM iSeries with OS400)
    relno      7000
    patchlevel 0
    patchno    98
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        9197
    Thu Jan 31 05:54:08 2008
    kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 9197) [dpxxdisp.c   1239]
         shared lib "dw_xml.so" version 98 successfully loaded
         shared lib "dw_xtc.so" version 98 successfully loaded
         shared lib "dw_stl.so" version 98 successfully loaded
         shared lib "dw_gui.so" version 98 successfully loaded
         shared lib "dw_mdm.so" version 98 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >MASAPPRO_PRO_00                         <
    DpShMCreate: sizeof(wp_adm)          50960     (1456)
    DpShMCreate: sizeof(tm_adm)          27955928     (27928)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
    DpShMCreate: sizeof(comm_adm)          548064     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1848)
    DpShMCreate: sizeof(wall_adm)          (200056/174328/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 0x700000080000000, size: 28969592)
    DpShMCreate: allocated sys_adm at 0x700000080000000
    DpShMCreate: allocated wp_adm at 0x700000080001ee8
    DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
    DpShMCreate: allocated tm_adm at 0x70000008000e658
    DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
    DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
    DpShMCreate: allocated comm_adm at 0x700000081abf630
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
    DpShMCreate: allocated gw_adm at 0x700000081b45390
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0x700000081b453c0
    DpShMCreate: allocated wall_adm at 0x700000081b453c8
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Thu Jan 31 05:54:09 2008
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation std
    <ES> Info: use normal pages (no huge table support available)EsStdUnamFileMapInit: ES base = 0x0x7000000d0000000
    EsStdInit: Extended Memory 12288 MB allocated
    <ES> 3071 blocks reserved for free list.
    ES initialized.
    Thu Jan 31 05:54:14 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:14 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:14 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:15 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:15 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:15 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:16 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:16 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:17 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:17 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:18 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:18 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:45 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:45 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:47 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:49 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:51 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:54:53 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:00 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:02 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:03 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:06 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:08 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:13 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:14 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:18 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:21 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:23 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:25 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:27 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:27 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:28 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:29 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:30 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:32 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1626]
    ***LOG Q0K=> DpMsAttach, mscon ( MASAPPRO) [dpxxdisp.c   11664]
    DpStartStopMsg: send start message (myname is >MASAPPRO_PRO_00                         <)
    DpStartStopMsg: start msg sent
    Thu Jan 31 05:55:32 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 05:55:34 2008
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 98
    Release check o.K.
    Thu Jan 31 05:56:06 2008
    MBUF state ACTIVE
    Thu Jan 31 05:56:07 2008
    DpModState: change server state from STARTING to ACTIVE
    Thu Jan 31 05:57:28 2008
    change reqtype of W0 from 1 to 4
    ***LOG Q0V=> DpAdXWpConf, mod_req ( 0DIABTC) [dpxxdisp.c   13661]
    change reqtype of W1 from 1 to 4
    ***LOG Q0V=> DpAdXWpConf, mod_req ( 1DIABTC) [dpxxdisp.c   13661]
    Thu Jan 31 08:00:55 2008
    change reqtype of W0 from 4 to 1
    ***LOG Q0V=> DpAdXWpConf, mod_req ( 0BTCDIA) [dpxxdisp.c   13661]
    change reqtype of W1 from 4 to 1
    ***LOG Q0V=> DpAdXWpConf, mod_req ( 1BTCDIA) [dpxxdisp.c   13661]
    Thu Jan 31 08:44:38 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 12 / sock 19
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.4.135:1179) [nixxi.cpp    4248]
    Network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T42 is 10.2.4.135(10.2.4.135)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (347 ALSALI 42 training4 ) [dpxxdisp.c   11375]
    RM-T42, U347, 900       ALSALI, training4, 08:44:28, M0, W1, SBWP, 2/1
    Thu Jan 31 09:09:27 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 77 / sock 84
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.3.76:1233) [nixxi.cpp    4248]
    Network error of client T109, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T109 is 10.2.3.76(10.2.3.76)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (462 ASEDKY 109 amrsedke ) [dpxxdisp.c   11375]
    RM-T109, U462, 900       ASEDKY, amrsedke, 08:49:14, M0, W1, VA05, 2/1
    Thu Jan 31 09:55:17 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 49 / sock 56
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.14.50:1158) [nixxi.cpp    4248]
    Network error of client T81, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T81 is 10.2.14.50(10.2.14.50)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (364 MHASSAN 81 Motazhassan ) [dpxxdisp.c   11375]
    RM-T81, U364, 900      MHASSAN, Motazhassan, 09:54:12, M1, W6,     , 4/2
    Thu Jan 31 09:55:27 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 108 / sock 51
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.14.52:1158) [nixxi.cpp    4248]
    Network error of client T168, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T168 is 10.2.14.52(10.2.14.52)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (1380 MKADY 168 AtaFathy ) [dpxxdisp.c   11375]
    RM-T168, U1380, 900        MKADY, AtaFathy, 09:54:12, M0, W3, ZSDS, 2/2
    Thu Jan 31 10:01:29 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 122 / sock 129
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.14.53:1144) [nixxi.cpp    4248]
    Network error of client T67, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T67 is 10.2.14.53(10.2.14.53)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (1230 MALGOHARY 67 Mohamedelgoh) [dpxxdisp.c   11375]
    RM-T67, U1230, 900    MALGOHARY, Mohamedelgohary, 09:41:13, M0, W2, FBCJ, 2/1
    Thu Jan 31 10:21:30 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 100 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T100, U402, 900  EABDELHAKAM, EmanHakam, 10:00:29, M1, W1,     , 3/1
    Thu Jan 31 10:25:50 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 65 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T65, U1129, 900        MSAAD, MOHAMMEDSAAD, 10:04:38, M0, W6,     , 2/0
    Thu Jan 31 10:27:50 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 189 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T189, U1638, 000             , MaryRose2, 10:06:37, M0, W5, SESS, 2/0
    Thu Jan 31 11:01:54 2008
    SoftCancel request for T107 U2249 M1 received from REMOTE_TERMINAL
    Thu Jan 31 11:05:12 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 188 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T188, U2347, 900  MABDELGHANY, ManStore, 10:43:54, M0, W10,     , 2/0
    Thu Jan 31 11:12:30 2008
    Network error of client T190, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T190 is 10.2.6.71(10.2.6.71)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (2917 HAEZZ 190 hanyezzeldin) [dpxxdisp.c   11375]
    RM-T190, U2917, 900        HAEZZ, hanyezzeldin, 11:12:18, M0, W3, VELO, 2/1
    Thu Jan 31 11:13:14 2008
    ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c   6846]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]
    -IN-- sender_id DISPATCHER        tid  190   wp_ca_blk   -1      wp_id -1
    -IN-- action    SEND_TO_WP        uid  2917   appc_ca_blk -1      type  DIA 
    -IN-- new_stat  NO_CHANGE         mode 0     len         -1      rq_id 38334
    -IN-- req_info  LOGOFF CANCELMODE
    ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c   6846]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]
    Thu Jan 31 11:13:15 2008
    -IN-- sender_id DISPATCHER        tid  190   wp_ca_blk   4       wp_id 0
    -IN-- action    SEND_TO_WP        uid  2917   appc_ca_blk -1      type  DIA 
    -IN-- new_stat  NO_CHANGE         mode 0     len         8       rq_id 40183
    -IN-- req_info  LOGOFF CANCELMODE
    Thu Jan 31 11:16:53 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 57 / sock 64
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.7.139:1185) [nixxi.cpp    4248]
    Network error of client T86, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T86 is 10.2.7.139(10.2.7.139)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (834 RMOAWAD 86 roshdimoawad) [dpxxdisp.c   11375]
    RM-T86, U834, 900      RMOAWAD, roshdimoawad, 10:56:06, M1, W12, FBL5, 3/2
    Thu Jan 31 11:19:13 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 105 / sock 112
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.7.120:1207) [nixxi.cpp    4248]
    Network error of client T143, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T143 is 10.2.7.120(10.2.7.120)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (552 IFEKRY 143 ibrahimfekry) [dpxxdisp.c   11375]
    RM-T143, U552, 900       IFEKRY, ibrahimfekry, 11:19:06, M0, W1, FB01, 3/1
    Thu Jan 31 11:56:01 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:56:43 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:56:46 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:57:50 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:14 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:41 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:47 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:49 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:50 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 11:59:53 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:01 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:02 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:03 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:04 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:05 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:07 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:08 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:09 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:12 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:15 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:00:20 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:19:50 2008
    DpHdlDeadWp: restart wp (pid=9213) automatically
    Thu Jan 31 12:19:56 2008
    Network error of client T180, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Thu Jan 31 12:19:56 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 12:19:57 2008
    Client address of T180 is 10.2.6.71(10.2.6.71)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (2942 HAEZZ 180 hanyezzeldin) [dpxxdisp.c   11375]
    RM-T180, U2942, 900        HAEZZ, hanyezzeldin, 11:51:33, M0, W0, VELO, 2/1
    Thu Jan 31 12:19:58 2008
    ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6908]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]
    -IN-- sender_id REMOTE_TERMINAL   tid  180   wp_ca_blk   5       wp_id -1
    -IN-- action    SEND_TO_WP        uid  2942   appc_ca_blk -1      type  DIA 
    -IN-- new_stat  NO_CHANGE         mode 0     len         375     rq_id 49950
    Thu Jan 31 12:21:27 2008
    ERROR => W0 (pid 9340) died [dpxxdisp.c   14319]
    Thu Jan 31 12:21:29 2008
    DpSetProcessPriority: Run priority for work process startup adjusted to 20
    Thu Jan 31 12:30:53 2008
    ***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 52 / sock 158
        (SI_ECONN_BROKEN/73; I4; ST; 10.2.5.110:1255) [nixxi.cpp    4248]
    Network error of client T113, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T113 is 10.2.5.110(10.2.5.110)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (2713 MMAGDY 113 MOHAMEDMAGDI) [dpxxdisp.c   11375]
    RM-T113, U2713, 900       MMAGDY, MOHAMEDMAGDI, 12:27:33, M1, W8, FB1D, 4/2
    Thu Jan 31 12:39:20 2008
    SoftCancel request for T117 U2416 M1 received from REMOTE_TERMINAL
    Thu Jan 31 12:54:32 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:56:17 2008
    WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
    Thu Jan 31 12:59:34 2008
    ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 108 (60secs)-> disconnecting [dpxxdisp.c   12158]
    RM-T108, U4450, 900  EABDELHAKAM, EmanHakam, 12:38:22, M0, W7, FTR0, 2/2
    Thu Jan 31 13:06:12 2008
    ERROR => DpRqCheck: T162 in state TM_SLOT_FREE [dpxxdisp.c   6846]
    ***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
    ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]

  • How to Configuration Boleto and make the files  - Bank Itau00FA   - Brazil

    Hi, Friends
    I need to configuration a bank since the beginning until to make a boleto and and make the files to send to the bank.
    I am alone in the customer and I do not have anyone  to help me.
    Thaks a lot.

    HEllo,
    The main transaction you'll use is FBZP. In this transaction you'll configure the payment method and the RFFO* program or PMW format you'll use.
    The main RFFO* programs are RFFOBR_V and RFFOBR_D.
    If you read the documentation of the programs (se38 -> program name -> documentation) you can see the steps you must perform in order to use the program.
    If you're going to use PMW you should check the  FEBRABAN_P format.
    After doing all the configuration steps you should create a variant for the print program and depending on your business requirements you shoulda add this to the last tab of F110.
    Regards,
    Renan

  • Automatic start and Stop the SAP System

    Hi experts,
    We want to deploy the unattended/Scheduled Start SAP  and stop SAP in IBM i series. How to do it? I have tried with WRKJOBSCDE and putted the command STOPSAP or STARTSAP but after finishing the job, now result. But when I simply put command STOPSAP/STARTSAP it works(start and stop sap system).
    How to deploy it?
    Thanks
    Asad

    Hi Ken,
    yes, that is correct, but in the meantime, it is **** easier ;-)
    As SAPHostAgent starts automatically, it is just needed in the default profile:
    Autostart = 1
    This is a really nice new feature ;-))
    Regards,
    Volker Gueldenpfennig, consolut international ag

  • How can I create a new behance account and migrate the content of the old behance account into the new one?

    I can't change the url of my old behance account so I need to start afresh with a new behance account... how can i migrate all content from the old url into the new one? thanks

    If you have a login questions - please contact Behance support directly. Behance is transitioning all logins to Adobe IDs this Spring 2014. If you signed up for Behance post April 10, 2014, your Behance login matches your Adobe ID exactly. If you signed up before this and are having trouble logging in, visit this section for more help, or contact Behance support. Please do not comment on this forum with login questions, as we're able to provide much faster, one-on-one support elsewhere.

  • No changes in Work Processes after restarting the SAP Instance

    Dear All,
    I have made some changes in the Application Servers.
    I had 22 work processes on my Application Servers out of which, 16 were Dialog work process, 6 Background work processes and 2 Spool.
    I changed the instance profile through RZ10,
    I made Dialog work process to 14 and Background work processes to 4 and added one(1) Critical Update and one(1) Non-Critical Update without changing the number of Spool work processes which were 2.
    After i restart the instance i can see that there are 14 Dialogs 6 Background and 2 Spool.
    I cannot see the Critical and Non-Critical Update which i added in the instance profile on both the Application Servers.
    When i checked the value of parameter rdisp/wp_no_btc (background) the value is showing 4, but in sm50 the background work processes are 6.
    Please can anyone tell me why the update work processes which i added are not shown in SM50 and,
    why there are 6 background work processes showing in SM50 where as the current value for the background work process is showing 4 in RZ11.
    Thanks in advance.
    Regards,
    Mudassir.Imtiaz

    Hello All,
    I changed the Operation Modes, it started showing the changes i made.
    Thanks.
    Regards,
    Mudassir.Imtiaz

Maybe you are looking for

  • Links in PDF not working when viewed in browser

    Whenever I view an interactive PDF in a Firefox window the links in the PDF don't work. They work in other browsers like Chrome and Safari, but in Firefox they are as dead as normal text. It also says: "This PDF document contains forms (even though i

  • Cannot print PDFs in Adobe Reader 11

    When I try to print a PDF using Adobe Reader 11, it says that it cannot print because no pages have been selected for print. Here's some more information: What I have done: printed a PDF through a web browser. This worked fine. saved that same PDF, r

  • Blinking (flickering) top left display corner after "wake up"

    Hello, I have a following problem. If the Screen goes to sleep mode and is "waken up" shortly after (within minutes) then for some 20 seconds the top left part of the display is blinking (flickering). Within the 20s this will gradually disappear. It

  • Problems with iCloud and my iPad

    It's been four weeks since I've backed up my iPad to iCloud; a window appeared and proceeded to sit there, stating that the requirements to backup my iPad to iCloud. However, when I push OK, it doesn't go away, and it's blocking usage of my iPad... D

  • MDG BP(role=Customer) vs MDG Customer

    Hi All,          As I understand,using the Supplier MDG,it can  create a BP either as a Vendor or a Customer depending on the Supplier role chosen. When EHP6 MDG comes with a Customer object,what will be the overlap between MDG-Supplier(role=Customer