Configure Webcenter Imaging domain in installed Webcenter JSK.

Dear all,
I am new to Webcenter. I am preparing an automated processing solution using webcenter (imaging & capture) and EBS. We have installed Webcenter Jumpstart Kit and we need to configure webcenter imaging domain. How do we perform this action. do we need to install imaging seperately or my set of software download's approach is wrong ?
appreciate your guidance or any pointer towards step by step process configuring the same would of great help.
Thanks and Regards,
Ranganath.

Hi Vikrant,
I tried the following steps :
1. Created a directory in Linux , under a certain mount point - eg : /u90/ipm/input
2. Gave it read/write access , got the UNC path as \\<hostname>\\ipminput
3. I could access it from the Windows workstation where OFR is installed.
4. Before, setting the new directory as the input folder for IPM, I wanted to test if OFR can export it directly to this new folder created.
5. Next, I created map to this network drive in the Windows workstation, like Z:\
6. When I enter this path as the export folder for OFR, it fails to export and gives "Invalid export directory".
My question, can we use a mapped network drive as an export directory for OFR?
Cheers
Peter

Similar Messages

How to configure WebCenter runtime on WebLogic server

Hi,
I have exposed my existing ADF 11g application as a portlet based on the inputs that I got from Re: Exposing Existing ADF application as a portlet in WebCenter . I'm able to deploy this and run this in the embedded WebLogic server that comes with JDev. But I'm getting an error when I try to deploy it on an standalone WebLogic Server? Do I need to anytshing specific to configure WebCenter run time? Currently, I just have ADF run time configured on the server. Please let me know.
Regards,
Antony.

You have to install webcenter. It's a rather large installation.
You can find the download here:
http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
The one you are looking for is:
WebCenter Suite (11.1.1.2.0)
And if you are running WLS 10.3.3 you also need to install
WebCenter Suite (11.1.1.3.0) (after installing the 11.1.1.2.0)
And don't forget to first run the RCU which you also need to download if you haven't already done so
Repository Creation Utility (11.1.1.3.3) (if you are using WLS 10.3.3 with Webcenter 11.1.1.3)
or Repository Creation Utility (11.1.1.2.1) (if you are using WLS 10.3.2 with webcenter 11.1.1.2)
If the installation askes to install UCM, don't check this on because otherwhise you also need to download UCM:
Content Management for WebCenter (10.1.3.5.1)
After the installation is done, you can run the configuration tool from the WLS to create a new domain and then you can select the webcenter components you want to install in the domain.

Configuring Webcenter Worklist with Oracle SOA Suite 10.1.3.4

Hi,
I have installed Oracle SOA Suite 10.1.3.4 on weblogic server 9.2. I want to configure Webcenter 11g worklist service with this SOA Server.
I would like to know if this is possible at all? Webcenter Suite 11g talks about configuring Webcenter worklist with SOA Suite 11g and I am not able to find any document
Thanks,
Vikas

Hi,
If you are trying to understand how to create a connection pool for a data source, then this document might be helpful
http://blogs.oracle.com/fusionmiddlewarereallife/soa_11g_bpel_composite_and_database_adapter.html

Error message while i am trying to configure app server domain in PT 8.48.1

Team,
I am getting below error message while i am trying to configure app server domain in PT 8.48.16. I have uninstall TUXEDO 8.1 and then install 3 times. But, no luck.
Enter domain name to create
:CRPROD
Merging old domain configuration file with new template file...
source C:\Documents and Settings\psadmin\Desktop\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!

I get below error when i try to create a domain from import a file option.
PeopleSoft Import Application Server Configuration
1) Import from file
2) Import from application domain
q) Quit
Command to execute (1-2, q) : 1
Enter full path to configuration file
:E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
Enter domain name to create
:CRPROD1
Application Server domain CRPROD1 already exists...
1) Replace existing domain
2) Enter different domain name
q) Quit
Command to execute (1-2, q) : 2
Enter different name for domain: CRPROD
Merging old domain configuration file with new template file...
source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
and when i try to crearte a domain with " create a domain " option , i got below error message.
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 2
Please enter name of domain to create :CRPROD1
Configuration templates:
1) developer
2) large
3) medium
4) small
Select config template number: 2
Creating domain...
Copying application server configuration files...
Stripping Annotations...
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!
Domain created.
Would you like to configure this domain now? (y/n) [y] :Y
Error opening file 'psappsrv.ubx':
Error opening file 'psappsrv.ubx':
Quick-configure menu -- domain: CRPROD1
Features Settings
========== ==========
Actions
=========
1) Load config as shown
2) Custom configuration
h) Help for this menu
q) Return to previous menu
HINT: Enter 3 to edit DBNAME, then 1 to load

Configuration cannot recreate domain. Restart of Config tool also throws error.

It is first time I installed OIM on my laptop (Windows XP- 32 bit system, OIM 11.1.1.7.0), installation is successful but it failed at Step 18, Configuration Progress, Restart Domain.
When I try to re-launch configuration tool:
Start - Programs - Oracle IDM 11 g - Home1 - Configure Identity Management Components.
It fails with a pop up message "Could not create the Java Virtual Machine".
Kindly help to resolve this issue.

Hi ,
Did you set the Environment Variable ? Please check weather JAVA_HOME is set or not.
I would suggest Install Java run time which can solve this issue.
Thanks

Error while configuring ADC (Additional Domain Controller)

Hello Experts,
I am configuring ADC (Additional Domain controller) in a member server which is in workgroup. while configuring ADC on that server, I got a window saying "additional information for this domain controller", where there were three options, i.e.
DNS server, Global Catalog, RODC (Read only Domain controller) and bydefault first two options(DNS & Global Catalog) were checked. I kept that setting and clicked on next. Now this is showing I need to give a static IP to my adapter, but I have already
given a static IP. when I unchecked the DNS button from that window it was not giving such error. Now my question is if I continue without checking the DNS, will it give me trouble in future. Please suggest. I am using MS2008 R2.
Swaprakash..

Ensure that you don't have another NIC in your server that is set to obtain IP address from DHCP. However, even if you proceed with this warning, you will probably not have any errors later, as long as you're sure that you have static IP assigned to your
internal NIC.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

How do you make a bootable install partition from a disk image of an install disk.

I have an iMac g4 running Leopard and would like to install OS X 10.3 on a different partition Leopard is on. However the super drive in the iMac will not read the disk I have, so I used my MacBook Pro to make a disk image of the install disk to use to install on the iMac. I do not know how to make the disk image into a bootable partition so I can install 10.3. The person I bought it from has already created a partition of the Leopard install disk and it is bootable but I do not know how he did this. Please help me. Thanks!

However the super drive in the iMac will not read the disk I have, so I used my MacBook Pro to make a disk image of the install disk to use to install on the iMac
Could be the cd is bad. Could be a bad cd reader.
I' not sure what you are trying to do.
To install,
-- you need to boot from a cd.
-- copy a working installation from another partition. try carbon-copy-cloner
-- could try target disk mode. There is a cd sharing mode.
"Installing OS X 10.4 'Tiger' on DVD-Challenged Macs Using FireWire Target Disk Mode" Should work for 10.3
http://lowendmac.com/misc/06/0710.html
Here is a picture of a firewire port:
http://upload.wikimedia.org/wikipedia/commons/thumb/b/b6/IEEE_1394_Firewire_PCI_ Expansion_Card_Digon3.jpg/800px-IEEE_1394_Firewire_PCI_Expansion_Card_Digon3.jpg
cd sharing across ethernet. Not sure if this works for booting.
http://support.apple.com/kb/HT5287

Anyone Seen this Message Before "Configuration changes for domain saved to the repository."

I'm running into this situation where one of my WLS servers is generating the following
messages "Configuration changes for domain saved to the repository." This process
of saving to a repository is causing an issue on start-up. Typically my deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
to my application. I've been able to identify that this process of saving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable this message?

This is just WebLogic writing back changes to config.xml, which it does from time
to time for reasons like:
- your app deployment has changed.
- you've reconfigured something in the console.
etc...
WebLogic just spins this off into a handy execute thread, so it would be surprising
if this was causing your app deployment to slow down (how do you know it is).
In my experience, slower than normal app deployments are usually down to:
- waiting for database connections.
- waiting for connecitons to other external resources.
Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
so if something's slow, everything gets blocked behind it.
simon.
I'm running into this situation where one of my WLS servers is generatingthe following
messages "Configuration changes for domain saved to the repository."This process
of saving to a repository is causing an issue on start-up. Typicallymy deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
to my application. I've been able to identify that this process ofsaving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable thismessage?

Can I configure two webserver domain in one windows server

Can I configure two webserver domain in one windows server with default port. ( i.e 80 )
For Ex:- http://server-name/psp/DOMAIN/?cmd=login and another one
http://server-name/psp/DOMAIN2/?cmd=login.
If not please let me know the workaround to do so. B'coz i don't want to put portnumber in my second URL..

Hi,
You can even have serveral domains within the same webserver instance.
During PIA installation (of the second) choose option existing domain and then add an additional site.
Give the domain a unique name and port to your second application server and you are ready to go.
I usually do this on sandbox environments to keep the sandbox small , with several databases (Portal, HCM, FIN, CRM) and one PIA with serveral domain.
But is definitely not what you should do for production systems.
Each application should have it's one PIA instance.
Hakan
I didn't read the port number requirement.
You can only run one webserver instance on a port number for example port 80.
But you can still have one webserver PIA with serveral domain on the same port number as described above.
Edited by: Hakan Biroglu on Mar 14, 2012 2:28 PM

Configuring Multiple LDAP Domains

I am having trouble configuring multiple ldap domains for declarative security and form-based authentication.
I have setup another instance of Directory Server on my local machine, on a different port. I want to be able to talk to this alternate directory server for form-based authentication and roles.
I have tried to do this by following the instructions at http://docs.iplanet.com/docs/manuals/ias/60/sp3/admin/adbasica.htm#21662, but I've had no luck. Below are screenshots of my configuration. (I've attached a word document in case you don't have a HTML-enabled mail reader).

My screenshots were wrong in the e-mail below, but correct in the attached word doc.
----- Original Message -----
From: Matt Raible
Newsgroups: iplanet.ias.general
Sent: Wednesday, August 22, 2001 7:05 AM
Subject: Configuring Multiple LDAP Domains
I am having trouble configuring multiple ldap domains for declarative security and form-based authentication with iPlanet Application Server 6.0, SP3.
I have setup another instance of Directory Server on my local machine, on a different port. I want to be able to talk to this alternate directory server for form-based authentication and roles.
I have tried to do this by following the instructions at http://docs.iplanet.com/docs/manuals/ias/60/sp3/admin/adbasica.htm#21662, but I've had no luck. Below are screenshots of my configuration. (I've attached a word document in case you don't have a HTML-enabled mail reader).

What is the Best Way to Re-Image and Re-Install Snow Leopard on MacBook Pro

Hello,
Is there a well documented best practices procedure for re-imaging and re-installing Snow Leopard on a MacBook Pro?
Thank you for any assistance.
Tony

Hi Tony;
The only best practices I know for that is backup first. I usually suggest a bootable clone that has been tested so that you are sure it is bootable. Insert DVD and boot from the DVD. Then install Snow Leopard. That's it.
Allan

In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card

I get this message when I try to TCP/IP settings in any network card.
"In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card"
What I have tried:
1. Removed card, did not click on "Remove driver". Then re-scanned in device manager. This usually leads to the network card showing up with a yellow exclamation mark, and I can not get it work again (have to use system restore).
2. Removed card, deinstalled driver, re-installed driver.
3. Rebooted a thousand times.
4. Used the Lenovo drivers.
5. Used the Intel drivers.
Doesn't matter what I do, I'm stuck with yellow exclamation marks in the end for the LAN and WLAN card, with not hope to repair them.
Driver version for the Intel 82579LM is 12.9.15.0
Driver version for the centrino advanced-n 6205 is 15.10.4.2
I'd really like some help on how to fix this so I'm able to configure my network manually.

For clarity, as your machine MTM number lists it with another type of WLAN adapter, and apparently, therein lies your problem.
How To Fix Error Message : In Order To Configure TCP/IP , You Must Install And Enable Network Adapte...
[How To Fix] In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

2215 EIT failure. VA recoad read failure.ensure drive with VA image is not installed correctly

2215 EIT failure. VA recoad read failure.ensure drive with VA image is not installed correctly

Hello 8022,
I understand you are getting the "2215-EIT failure. VA boot record read failure. ensure drive with VA image is installed correctly" error. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My supervised Ipad minis won't refresh with configurator so how can I install apps?

I have a set of 6 iPad minis, orginally set up by the company we purchased them from. We have connected them to the macbook via a sync unit and they wont refresh in configurator. I can't install any apps. But it all work fine for the supervised iPods set up at the same time.
Any ideas?

Erase All Content and Settings completely erases the iPad and returns it to the factory settings, as a new iPad out of the box.

Configure Webcenter Imaging domain in installed Webcenter JSK.

Similar Messages

Maybe you are looking for