Configure Windows Domain Logon on Airport Express

The question is... How can I configure Windows Domain Logon data on an Airport Express so it connects automatically without asking each of my other devices for login credentials?
I use my Airport Express at work connecting it through ethernet, and the network uses Windows Domain credemtials to login, that is user, password and domain server. I have all data needed, this is, static IP, Gateway, DNS, user, password, etc., but I haven't found how to do this inside de Airport Express so I configure just one device instead of 3 or more.
I have tryed configuring the Airport Express as PPPoE, but that's not the solution for this problem.
Thanks in advance for the answer.

Your wireless Netgear router and AirPort Express Base Station (AX) are pretty much useless if you don't have wireless capability for your Dell desktop. The AX uses AirTunes to receive, wirelessly, iTunes from your desktop.
Just add a wireless card to your Dell and you should be in good shape. In fact, once you go wireless, you can return the Netgear router as your AX will provide Internet connectivity, stream iTunes, and share a USB printer.

Similar Messages

Is there a way to configure win 8 Laptop to airport express? I can see theN connection to the wireless network, but troubleshooter suggests there's t

Is there a way to configure win 8 Laptop to airport express? I can see the connection to the wireless network, but troubleshooter suggests there's there is no gateway and of course no internet. The connection
shows limited. Any help you could provide would be most appreciated. Further, should I simply buy another router for the windows machine? If I did that, would it interfere with the airport?

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Itunes 10.1 Windows 7 and missing airport express speakers

First, let me say that although this is my first post, I have been lurking here and exploring the forums for a long time. I have windows 7 64bit, an airport express (so that I can play my music remotely on my stereo) and an ipad. Everything works great under itunes 9.x. However, I wanted to upgrade my ipad, which required me to upgrade to itunes 10.x. The ipad update went well, but I no longer have the option to select my remote speakers in itunes or the remote app on the ipad.
I have searched the forums and have performed the following: 1) unselected and reselected both homesharing and folder sharing in itunes, 2) Unselected and reselected 'search for remote devices' in itunes, 3) Changed settings in windows firewall to ensure the 'private' profile for itunes had both udp and tcp protocols, with transverse edge detection on, 4)reset windows firewall and then reinstalled itunes 10.x at least four times, 5)ensured that I can reach my airport express through airport utility on that same computer.
I am at my wits end with this. If I try to reinstall itunes 9.x, it tells me that my library has already been updated and itunes 9 does not open. I would really like to be able to run version 10 and would appreciate any further suggestions.
Thanks,
Brock

Just to let everyone know. I believe my issue was with Comodo Internet Security software. Even though I had the firewall portion off, after uninstalling the airport express speakers came back. Note...I had this configuration working fine with iTunes 9, but 10 must've had some underlying changes.
Message was edited by: zosobao5150

Leap and windows domain logon

I'm doing some test with an Air 1200 and some 352 Pc card for one of our customers.
With ACU ver. 4.25.23, I enabled LEAP authentication using the windows user name and password.
Leap authentication is successful, while windows domain logon not.
Not to say using a "normal" NIC that logon succeed.
Sniffing the packets that come out the AP, it seems the domain logon happens... I see the requests/answers between my client and the domain controller...
However, after canceling the windows domain logon I have normal connectivity with the entire network.
Someone experienced that? Any help will be greatly appreciated.
Antonio Tassone

Sure.
My attempts to logon in a windows domain using the same user/password for LEAP authentication and windows logon were unsuccessful (either using Win9x or Win NT/2000 on the client), indeed the login dialog box was stuck in something like "searching primary domain controller" or similar (I'm sorry but it's been some month ago).
Looking the Radius server log, I found an error like " xxxxx DLL rejected".
Searching the Cisco web site and the forums for that error, I read the advice to make the authentication services on the NT server to run with the privileges of one of the Windows Domain Administrator accounts.
Following that advice, and with some other tweaking explained in the document I read, I reached my goal.
I regret I can't be more precise.
Regards.

ITunes/Airport Utility Windows cannot connect to Airport Express

I really hope someone can help me with this since I have spent 2 days trying to get my new Airport Express to stream music with no luck yet.
I have a wireless network using Netgear WGR614 with WPA security settings. The AE has V6.3 firmware update and I used the Airport Admin 4.2 to set it up. I tried all the recommendations here and connected the AE to the router LAN port using ethernet cable and did a factory default reset. I then configured it to join my existing wireless network providing the WPA details.
That is when the problem starts. After successfully updating and rebooting the AE shows solid green LED. However, using Airport Admin to connect fails intermittently with error -6753 asking me to check my network settings even though they are fine. If I try a few more times, it connects and I am able to enter and modify settings. When doing another update, it again fails with error -6753, but a few retries later, it does go through. Note that all this time, the ethernet cable is still connected to the AE even though it is setup to connect to my wireless network.
Now, I unplug and relocate my AE near my stereo - it starts up fine and shows solid green light. My router "attached devices" page indicates that the device is connected with the DHCP ip address of 192.168.0.3. However, when I now try to use Airport Admin, it ALWAYS gives me the connection error -6753. The AE shows up in iTunes, but when I connect to it, it just hangs and after a minute or so, just gives up and goes back to the "Computer" speaker.
I tried to do a ping on the ip address, and it gives me "Request timed out". I thought maybe it is my laptop interfering so I did ensure that I turned off ALL firewalls, but the problem still remains.
So in short, AE seems to be joined and connected to my existing wireless network (green light), but neither Airport Admin nor iTunes nor ping utility can even communicate with it; and it seems to be due to the error -6753. I have tried pretty much every advise regarding connecting via wired etc. and nothing seems to work. This is not a wireless interference issue too, because the error also appears when connected via cable.
Any help really appreciated.
Thanks.
R

Thanks for the response. Here is an update:
I tried to connect to the AE from another windows laptop...and it worked. So it seems that it is only my laptop that cannot connect to the AE. The only difference is that I used my laptop to initially connect to the network created by the AE, and after that I could never get it to connect.
Interestingly, when I did manage to get into the AE and check its log, here is what I find...
Jan 1 00:00:00 5 Configuration updated.
Jan 1 00:00:01 5 Initialized (firmware 6.3).
Jan 1 00:00:15 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 00:00:16 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 00:00:30 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 01:14:29 5 Disassociated with station 00:09:5b:fb:7c:7a (message integrity error).
Jan 1 01:14:38 5 Disconnected from network.
Jan 1 01:15:31 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 01:15:31 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 01:16:14 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 01:27:18 5 Connection accepted from ::ffff:192.168.0.6/1153.
Jan 1 01:27:24 5 Connection accepted from ::ffff:192.168.0.6/1154.
Jan 1 02:35:43 5 Deauthenticated with station 00:09:5b:fb:7c:7a (leaving network).
Jan 1 02:35:43 5 Disconnected from network.
Jan 1 02:35:49 5 Disassociated with station 00:09:5b:fb:7c:7a (message integrity error).
Jan 1 02:35:49 5 Joined BSS 00:00:00:00:00:00
Jan 1 02:35:51 5 Deauthenticated with station 00:09:5b:fb:7c:7a (4-way timeout).
Jan 1 02:35:51 5 Disconnected from network.
Jan 1 02:35:59 5 Disconnected from network.
Jan 1 02:36:52 5 Joined BSS 00:09:5b:fb:7c:7a
Jan 1 02:36:53 5 Installed unicast TKIP key for authenticator 00:09:5b:fb:7c:7a
Jan 1 02:37:07 5 Internet configuration leased (host 192.168.0.3/24 gateway 192.168.0.1 dns1 192.168.0.1 domain innomedia.com lease 7776000).
Jan 1 02:50:49 3 Administrative access denied to ::ffff:192.168.0.2/2397.
Jan 1 02:51:08 3 Administrative access denied to ::ffff:192.168.0.2/2400.
The administrative access denied is pointing to my laptop, whereas the connection accepted was the other laptop from which everything works. So it seems that the AE is specifically not allowing my laptop to talk to it! Given that my AE is being connected in Client mode, there are no settings I can access to see why it has singled my laptop out.
Any help appreciated.
Thanks
R

Printing from Windows XP via an Airport Express

This might be helpful for anyone who has the same problem with their printer...
If you configure an printer via windows connecting via tcp/ip default most people use RAW_9100 or LPR, problem is that so far all printers I tested from Canon seem to have problems with LPR and completely do not work with RAW_9100...
Fix:
Simply change the RAW port to 9101, don't forget to remove all tasks from your printer queue first before changing.
If other people have the same problem and maybe a other solution please post here

Yes this finally made my Canon S300 print from XP while connected to an Airport Express. Other Macs on the network could print just fine. The XP Bonjour Printer Wizard was absolutely useless in trying to create a working printer. Here are the steps I took.
START > Settings > Printers and Faxes
“Add a printer”
Click Next
“Local printer attached to this computer”
“Create a new port” / select Standard TCP/IP Port from the pulldown requestor
Click Next
Enter the IP address of the Airport Express in “Printer Name or IP Address”
While entering the IP address the box below should automatically fill itself in as the same IP address and should insert “IP_” before it (after you have finished entering the first box)
Click Next
Check the “Custom” radio button
Click “Settings” next to it
**this is the important weird part that finally made my Canon printer work**
Change the “Port Number” to 9101
Click OK
Click Next
Click Finish
Select the Brand and Make (driver) of your printer
I clicked “Keep Existing Driver”
Give it a name or leave the one it created in “Printer Name”
Select whether or not you want it as the default printer
Select whether or not you want to share it (probably not since other can access it over the network in their own way)
Go ahead a print a test page and rejoice when it finally prints (I did)

Slow window domain logon over ezvpn netw ext mode tunnel

I have 4 branch offices connected to a central EZVPN server in network extension mode.
tunnels are working correctly but domain logon is extremely low (often more than 10 minutes).
Do you think it could be a fragmentation issue?
If it is, do you know any way to solve it?
The errors reported are in windows XP system logs are the following:
     System     > LSASRV 40961 no secure connection with server, no authentication protocol available
     Application> usernv 1030
     Application> usernv 1006
Thanks
Johnny

Hi
I am in exactly the same situation with the ASA 5510 running security plus license, version 8.0(5) 512 MB RAM
going to try to upgrade the IOS tonight and upgrade the RAM to 1GB to take it up to version 9 will let you know if it helps,
cureently download speeds are very bad aroudn 14MB where as uploads are around 96 MB

First attempt at windows pc connecting to airport express

All pf my macs can connect to my airport express and use the internet. I am trying to connect an IBM thinkpad with windows XP to connect. The laptop cannot see the AX at all ( it does have an infared port) Help!

Chet Durnal wrote:
All pf my macs can connect to my airport express and use the internet. I am trying to connect an IBM thinkpad with windows XP to connect. The laptop cannot see the AX at all ( it does have an infared port) Help!
Ensure that you change the channel on the Airport Express from Automatic to a channel between 1 and 11.
Does the IBM Thinkpad have wireless capability? Infrared is for IR communication.
Ensure that the wireless switch on the IBM is in the ON position.
Problems connecting an XP PC to an Airport Extreme Base Station
http://tech.ifelix.net/2002.html
iFelix

How do you configure the a network for Airport Express from a PC computer

A friend let me borrow her Airport Express so I could have wireless, but I can't figure out how to set up the network from my PC computer. She just gave me the device without any accompanying instructions or software. The intructions online only explain how to setup the network using an Apple product. How can it be done from a PC?

Use the same instructions and the Windows version of AirPort Utility:
AirPort Utility 5.5.3 for Windows

Windows 7 conflict with airport express 2nd generation

My airport express (2nd generation) is losing it's wifi connection with my router after being connected for an hour or so. It was worse (happened faster) until I made some setting changes. Here is the current config and purpose of what I am trying to accomplish...
Goal - Connect my son's new gamer computer that is running windows 7 professional to the internet
Config -
1. Airport is set up to connect to an existing wireless network that uses WPA/WPA2 Personal security
2. Ethernet cord is plugged into the ethernet slot in the back of the airport and runs to the ethernet slot on the computer.
Once the connection is lost, all you have to do is unplug and re plug in the airport and the light goes green and all is good for a little bit.
Yes, I have unplugged, disconnected and reconnected the router, too after making changes.
Any help would be greatly appreciated.

iTunes: Troubleshooting AirPlay and AirPlay Mirroring
About AirPlay Mirroring in OS X
For AirPlay Display (video) to work, check if the checkbox at System Preferences -> Displays.
For AirPlay (sound) like iTunes, check if the device shows up...
If you have Firewall turned on the Mac, check if Bonjour ports are open.

Windows XP connecting to Airport Express

Hello,
I recently bought an airport express and set it up to join an existing network within my house. I set the AE up using my powerbook G4 and it works perfectly. I can print to it, and stream my music to it. However, I also have a Windows (XP - SP2) box. For some reason I cannot see the AE when using the admin utility on windows. I can however print to it by setting up the ports and such manually. Both machines and the AE are in the same room so I'm sure it's not a range or interference thing, but I still can't see it in the admin or setup utility. I also have iTunes 5 and it doesn't see the AE either. Any help with this would be greatly appreciated.
Thanks,
EB

Hi Henry,
Thanks for the reply, I found another thread that suggested the same. I disabled all Windows firewalls, and removed any bridged connections. The Airport utilities still can't see it. I have WEP enabled on my home network, but the Windows machine can connect to the Internet without any problems.
This is most likely a stupid question, but there isn't any way that my setting the AE up using my Mac has caused it to not be visible from a windows machine?
Thanks again for any help,
EB

Airport configuration utility doesn't find Airport Express anymore

Hi,
This morning I updated my Airport configuration utitlity to version 6.3. When I opened the new version I noticed it couldn't find my Airport Express anymore. There was an error about the AE not being in my network anymore and whether I would the utility let it forget or not... However, I was still connected to the internet. So, no big problem for now, but I would like to be able to configure my Airport Express when needed, and that's not possible know.
Anyone else experiencing the same problem? I tried to reset (soft, hard and back to factory defaults) the AE, but no result. Only way to reconfigure my AE is through the wireless networks overview on my iPhone. The configuration utility on my iPhone works neither.
The old version of the utility (5.6) does recognize the AE by the way. Seems more like a software problem to me then?
The configuration utility on my iPhone works neither.

his worked for me and Airport Utility sees all my devices now.I indeed did it through the Terminal. But behold: in another thread I found the solution to this problem. I found this:
Jeff Leigh
Re: Airport Utility v 6.3 Fails to See Airport Extreme or Express
Jun 13, 2013 10:03 AM (in response to williamfromames)
Looks like 6.3 is using IPv6 to talk to Time Capsules/Airports. I know I had turned off IPv6 long ago since I didn't need it. Also looks like Apple has removed 'Off' as a valid choice for that setting.
To turn IPv6 back on:
Open System Preferences->Network
Click Advanced
Change Configure IPv6 from 'Off' to 'Link-local only'
Click Ok
Click Apply
AU 6.3 should now be able to communicate with your device.
This worked for me and Airport Utility 6.3 sees all devices in my network. You should try this too. Good luck!

Printing Lighter from windows to mac via airport express

My wife has a windows vista computer and the only way she can print to our printer through the airport express is if she connects to the printer through my computer as a shared printer. Going directly to the printer via bonjour does not work.
Anyway, whenever she prints to the printer the text is always lighter than it should be or would be if she was directly connected to the printer. My iMac prints perfectly to the printer via the AE.
Any ideas?

Airtunes actually only support MP3/AAC audio streaming from iTunes. That's too bad for video.
The things is, even with other Airtunes streaming software, the streaming delay is such that the song will be off by a few second from the video. I guess Apple have choose to do not stream video sound until this may be resolve.
Therefore, I'm not aware of any solution to this issue.

Windows xp does not see airport express

I run an airport express as a base station in my apartment which works fine both for my iMac and my Palm pda. But a friend is visiting me presently, and her windows laptop, running XP, does not see my wifi station, although it sees others in the area. I tried removing security but that made no difference.
Is there perhaps was something that had to be ticked in the airport base station setup to enable Windows laptops to see Apple wifi? As for example when I send attachments in Apple Mail I have to tick a box to make them Windows-friendly.

I use Airport Express... two Macs and another laptop running Win XP and couldn't get the Win to see the network until I changed to a different card, a D-Link Airplus. I think it was all of $19.95 and works like a charm...
Also, in Airport Admin Utility/Network, make sure you have:
Distribute IP addresses checked and where it says; Share a single IP address using DHCP and NAT, click the pop up menu and select: Use 10.0.1.1 addressing.
Also, her Win might be picking up interference your iMac or Palm doesn't... try a different channel:
By default, the AirPort software automatically selects the best available channel when the base station is plugged in. If your base station is experiencing interference, try changing the channel it uses.
To select a different channel:
Open AirPort Admin Utility, located in Applications/Utilities.
Select your base station and click Configure.
Enter the base station password if necessary.
Click AirPort, and then choose a new channel from the Channel pop-up menu.
Carolyn
Message was edited by: Carolyn Samit

Should airport express be configured with the same network as my existing router

Should airport express be configured with the same network name as my Verizon router.

Carolyn1962 wrote:
I am new to apple,used to windows.Apple store advised airport express in order to boost my DSL router.In order for it to be most effective should it be under the same settings.Still learning
A router signal can not be boosted as all routers put out the maximum allowed by law. However, proper placement of a secondary router will enable it to "repeat" or extend the signal.
An Airport can "extend" the WiFi created by another Airport. It can not extend a non-Apple WiFi. You need TWO Airport units, one to function as the main radio and the other to function as an extender. I used two Express units.
Configuration is simple if you start from a factory default condition. Connect the main Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations. After confirming that it works, insert your desired administrative and WiFi passwords.
Then connect the extender to AC power. As before, open Airport Utility on your Mac or other computer and accept all of the recommendations. No need to add password info.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!

Configure Windows Domain Logon on Airport Express

Similar Messages

Maybe you are looking for