Configure workflow notification mailer for more than one domain
Hi ,
Is it possible to configure workflow notification mailer for two different Domains ?
We are using more than one domain so the notifcations/mails has be to be directed to more than one domain .
please guide me through some docs .
Regards .
Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer
Similar Messages
-
Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
at WLSecurityTest.runTest(WLSecurityTest.java:75)
at WLSecurityTest.<init>(WLSecurityTest.java:66)
at WLSecurityTest.main(WLSecurityTest.java:51)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains). -
How to configure Workflow Notification Mailer for oracle alert in R12
Hi all....,
How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
Regards ,
MadhanDuplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer -
How to configure EM Grid Control for more than one databases?
Hi,
I'm configuring EM on Oracle 10gRel1 on Linux. I have more than one databases in the server, and I want use IE at my PC to monitor the databases on Linux server. I can configure and access the Grid Control Console by emca for first database, but cannot configure for the second one, unless I remove the first one configurration. How can I configure EM for more than one databases?
Thanks.Thank you everybody.
Yes, I'm talking about DBConsole rather than Grid Control (sorry for misuse the term). I managed to set up DB Console for every DB in the same Linux box (10Rel1). What I did is:
1) stop db console and agent with emctl
2) remove repository with RepManager
3) config with emca
Then I can monitor individual databases from my PC (but have to login with different port).
I'm thinking mybe I should use Grid Control instead. -
How to configure workflow notification mailer for iPad
EBS R12.1.3
Sun Solaris 11
DB 11g
First i apologize for users here becasue i have to repost this. May be i did not ask proper question last time
Currently my users got the internet expense or requsition approval in an email with an attachment and when users open the attachment the Oracle HTML page open and allow click on approval or reject. This works fine from outlook email from desktop. But when users receive the email on iPad the attachment does not open. It give the blank page.
Can someone advise how can user approve the work flow notification from iPad. This is my analysis for our requirement. Can someone advise am i on right direction. if there is any Oracle docuemnt available then please provide the doscument detail or sequence of doscument that i need to follow
Set up the IMAP4 compilance unique inbound email with INBOX, PROCESS and DISCARD folders
Configure the inbound email from OTM
Ignore the outbound email configuratiion from OTM becasue it is already working. It is set with SMTP
Check the inbound and outbound connection from ebs server
If you can not ping the IMAP server or telnet the SMTP server from ebs server. Make sure firewall/ports are open
Add inbound and outbound server entry in server host file
Apply the patch 16328729 for iPad compatibility
Test it
What would be the over all impact of this change. will the users still able to approve the notification using the attachment or this will change.Pleas see the following links/docs.
http://search.oracle.com/search/search?search_p_main_operator=all&group=Blogs&q=iphone%20weblog:stevenChan
How To Get Oracle iProcurement Workflow Notifications To Work For Outlook On Blackberry or Other Mobile Devices Such As Phones and Tablets (Doc ID 1424978.1)
Troubleshooting Inbound & Outbound Email Notifications (Doc ID 1184846.1)
What are the Prerequisites for Implementing iPhone with Business Approval For Managers Product (Doc ID 1388153.1)
Thanks,
Hussein -
can you set up 2 accounts for mail on the ipad. I would like one for myself and my wife.
yooper,
There is no limit as far as I know. The iPad manual says:
"Set up an account on iPad:
1 From the iPad Home screen, tap Settings.
2 Tap “Mail, Contacts, Calendars,” then tap Add Account.
3 Tap an account type:
4 Enter your account information and tap Save.
Your service provider or system administrator can provide the account settings you need."
;~) -
How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?
If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards -
Setting color codes for more than one photo at a time
Is there any way to set color codes for more than one photo at a time?
Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim -
Outlook (ex Hotmail) on iPhone refuses to send e-mail to more than one person
Hi,
I have two questions today...
When I try to send an e-mail to more than one person from my @outlook.com address on my iPhone it fails everytime and a message pops up that it could not connect to the server. Sending e-mails to one person at a time works perfectly. I think this is a Microsoft issue as I had to verify that I was "human" before I could send a test e-mail to more than one person while logged into the Outlook website on my PC. I never had problems like this on my old Gmail and Ymail accounts. Any ideas how to fix this?
Alternatively, I can use my @icloud.com e-mail address, but this leads to my second question. Apple states that I cannot use my iCloud e-mail address as my Apple ID. I do however not want to keep two mailboxes. Can any e-mails Apple send me (eg. receipts for purchases, etc) be sent to my iCloud address? I'll can then just keep the other e-mail address just for the Apple ID but do not have to monitor it. It this can be done please advise where I can change this.
Any advice will be greatly appreciated.Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address. -
SU01 user as reseller for more than one customer?
Hi,
We have a requirement where internet user act as a reseller and can place order for more than one customer in ISA R/3 edition. In the XCM configuration i have selected the user as R3_SU01UserStandalone and then followed the activity given in the SAP Document:
http://help.sap.com/saphelp_crm40/helpdata/en/03/f6ce51eb8e4dbe82b9ca75e5c74fe6/frameset.htm
Can anyone provide a solution what other steps i need to follow for this issue.
Thanks
AnkitDear Shankar
You have not specified whether the scenario is MTO or MTS. If it is MTO, stock will be allocated against sale order as and when MFBF is done. If it is MTS, then go to OMJJ, select Movement Type and give 292 and execute. Now select "Field selection (Enjoy)" tab on your left and there maintain the option as Required Entry for the field "KDAUF" and save.
Now go to MB1A, give movement type 292 with special stock W, plant and storage location and execute so that the system will ask for sold to party code. Give the sold to party code and enter material code, stock to be reserved and save.
If you see in MMBE now, those stocks will be displayed as special stock.
thanks
G. Lakshmipathi -
Creating SQL-Loader script for more than one table at a time
Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant RaneNo there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need. -
Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time
Hello all,
Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
(ME61/ME62/ME63)
Detailed replies with various possibilities would be highly appreciated.
Thanks & Regards,
Joy GhoshThe vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
There you define a job that runs RM06LBAT report.
You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create. -
Setting Equalizer for more than one song at a time
Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
Thanks,
Joe The Authorhighlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.
-
Master_detail for more than one record at a time
Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.BcjThanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj -
Can we use same program ID for more than one RFC scenarios
Hi experts,
I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
IPRODUCT type standard table of ZPMS initial size 0,
wa_quote type ZIQMD,
wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
I_QUOTE = iquote .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
I_QUOTE = iquote .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
IPRODUCT = IPRODUCT .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
IPRODUCT = IPRODUCT .
COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh
Maybe you are looking for
-
Re: How to download Acrobat XI included with a Acrobat subscription.
Can someone please help? I have a serial number from my purchase but cannot locate the English version! UGH!
-
xsl:include in XSL Workshop
I am trying to use <xsl:include> for some proxy stylesheet. I use the form <xsl:include href="filename.xsl" /> I get the following error when process the stylesheet: 'Bad URI found while including/importing file: no protocol: filename.xsl' Currently
-
Confusion on setting hostname and DNS
Greetings, I have S10 on x86. In attempting to get the DHCP client up and running I followed the instructions from the S10 Documentation and ran sys-unconfig. This seemed to work well in that it did handle the setup of DHCP for my lan card. One thing
-
Ladies and gentlemen, I have a Nokia E6-00 and CK-600 kit in my car. When communicating with the CK-600, notice that the screen is the same for the control of changing songs, and sometimes I get no control to turn off and on phone calls. I know the k
-
When I start working on the Anil Passi's tutorial for OAF framework, there is a mentioning for .dbc file..What is the significance for this file? I saw in my local desktop ap607sdb_fwk11i.dbc..Can I use this for learning through ANil Passi's lessons?