Configure X-lite with GNS3

I am working in lab environment using GNS3 router 2691 and X-lite SIP phone. Please share the proper configuration for the same. 

I assume you have been setup GNS3 and want to register X-Lite with CME (not CUCM). If yes, please check the following;
http://www.netcraftsmen.com/sip-endpoints-in-cisco-communications-manager-call-manager-express-x-lite/
Another example of SPA phones however configuration step in CME shall remain same;
http://www.cisco.com/c/dam/en/us/products/collateral/unified-communications/unified-communications-manager-express/spa_polycom_application.pdf

Similar Messages

  • Vrf-Lite with MPLS requires a PE at the customer side?

    Folks,
    Looking at a cisco doc, which gives a sample configuration of VRF lite with MPLS (multiple customers in the same building using same MPLS cloud). My question is that how is it done in the real world. Does the provider place a PE at the customer site? cause the connection between the CE and PE has to be a link that can carry dot1Q (ethernet or fast etheret) atleast the example shows that.
    Any real world experience would be highly appreciated.
    Thanks,

    Hi,
    the customer needs no PE router installed at his site.
    You can use vrf-lite (aka multi-vrf) even on a Cisco router, which does not support MPLS at all. On the CE each dot1Q subinterface can be placed in a vrf. All you need is a routing process started within the vrf being adjacent to the PE.
    Example CE:
    ip vrf CE-VRF1
    rd 65000:1
    interface FastEthernet0.100
    encapsualtion dot1Q 100
    ip vrf forwarding CE-VRF1
    ip address 10.1.1.1 255.255.255.0
    router ospf 100 vrf CE-VRF1
    network 10.1.1.1 0.0.0.0 area 1
    The PE would have MBGP and different RD and RTs defined, whatever is needed to setup VRFs in the provider network. Infact PE and CE each do not know about each others VRF configs at all.
    VRFs on the CE define a separate IP routing context (control plane). The separation on the data plane is done via dot1Q headers (frame-relay, ATM PVC etc. would do as well) on the link between CE and PE. In an MPLS network data plane separation is done via labels.
    Hope this helps
    Martin

  • Doesn't play songs, "itunes is not configured for use with mac-formatted"??

    Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
    The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
    Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
    Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
    Thanks for any thoughts!

    Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
    I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
    If there is anyone out there that can help please do!
      Windows XP  

  • I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    Hello, since nobdy else has replied...
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • Boot data configuration missing or with errors

    I have a Satelllite L870-15W, and no way to turn the system on.
    All it says is "Toshiba" (the welcome screen) and then (after having pressed f8 or f9):
    file: efi/micorsoft/boot/bcd,
    status 0x0000001;
    the boot configuration data for your or is missing or contains errors.
    I have only recovery partition at D: but cannot access it. What shall I do?

    Satellite L870-15W (PSKFNE-00700CHU) <- Hungarian version
    Spec here too.
    boot data configuration missing or with errors
    It probably means the BCD is missing or corrupt.
    To repair this, you need to access the recovery environment. Microsoft says Windows 8 will eventually take you there if it fails to boot many times. You can also get there using a System Repair Disc or a Windows 8 installation DVD like this downloadable one. You need the 64-bit disc.
    It's possble this will also work on your Toshiba machine. Restart the computer by pressing the power button and immediately start tapping the F12 key until the Boot Menu appears. Using the arrow keys, select <HDD Recovery>.
    WinRE looks like this. Select Troubleshoot and then Advanced options.
    Lots of things to try. See KB2622803 for boot sector problems. The article assumes Windows Vista/7. The same fixes look different in Windows 8, but are all available.
    If Automatic Repair (Startup Repair in 8.1) and System Restore fail, use the bootrec tool at the command prompt. This applies to Windows 8 also.
       Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issu...
    Don't give up until you have tried replacing the BCD itself as follows. (Sometimes the partition is not named "c" and you need to try another letter.)
       c:
       cd boot
       attrib bcd -s -h -r
       ren c:\boot\bcd bcd.old
       bootrec /RebuildBcd
    -Jerry

  • I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

    I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

    Priscilla,
    if your Mac is still in warranty, then you should contact the Argentinian technical support service. If it is out of warranty, then we can try to lend a hand. (We’re just fellow Apple product users here.)

  • How to configure bt mail with icloud?

    how to configure bt mail with icloud?

    iCloud does not handle any mail systems except for its own. BT is not an iCloud mail system, so you can't.

  • Configure airport express with mac book air

    I am trying to configure airport express with a Mac Book Air, without success; the program is installed, but then, nothing appears to configure Airpor Express...
    Can I get any help? Thank you
    António

    Hello!
    I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
    So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
    Any sugestion? Big houses are a problem...
    Best regards, and once again thank you!
    Antonio

  • I am using elements 11. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

    I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

    See if this helps:
    Error "License store does not allow writing" | Install log | CS5, CS5.5

  • Oracle 8i Lite with Embedded Visual Basic

    Has any one used Oracle 8i Lite with EVB to develop an application on Windows CE Platform. Can any one help me where can i get sufficient information to do this. Thank you in advance.
    suresh
    null

    I'm having alot of problems trying to connect to an Oracle 8i database from my handheld Windows CE Platform. Below is the code that I am using in eVB. I can't find any support for the name of a provider. The provider that I have listed here is the normal ADO provider for oracle, but I have no idea which provider to use for the CE system. If anyone could help me out, please post your responses here. Thanks!
    I did try to use the free download of ViaDB from Odyssey Software and they don't support the H/PC Pro. This is why I need to find an alternative to connecting to the Oracle8i database from my WindowsCE Device.
    I'll probably end up calling Oracle because they do support ADOCE. see here
    Dim adoConn As ADOCE.Connection
    Dim adoRst As ADOCE.Recordset
    Dim mstrSQL as String
    Set adoConn = CreateObject("ADOCE.Connection.3.1")
    adoConn.Open("Provider=msdaora;" & _
    "Data Source=MyOracleDB;" & _
    "User Id=myUsername;" & _
    "Password=myPassword;"
    mstrSQL = "SELECT * FROM myTable"
    Set adoRst = CreateObject("ADOCE.Recordset.3.1")
    Call adoRst.Open(mstrSQL, adoConn, adOpenDynamic, adLockOptimistic)

  • Configuration assistant error with Oracle 10g 10.2.02 with Solaris 10 6/06

    Hi all,
    As anyone seen this a fix for this error?
    I have installed Solaris 10 6/06 x86 on VMWare 5.2 which works fine.
    When I attempt to install Oracle 10g 10.2.02 for Solaris x86 (released in Sept 06), the install goes fine until I get to the configuration assistant stage.
    The first Net based configuration assistant fails with a Java exception which seems to be related to a Sig 11 in the libc library.
    This looks like an error fixed by a patch mentioned in the release notes but the patch does not seem to be available for this version of Solaris.
    Any comments would be greatly appreciated...
    Regards
    Anthony

    Hi all,
    Just to update this.
    I have deselected the create database option part of the install and Oracle installs OK!
    The problem is in the create database phase which I have manually done when I use the dbca program.
    When I get to the create database operation of the the dbca wizard, I get a the following error "ORA-00600, internal error code, arguments [kelntf-ldminit, [146],[1],[],[],[],[],[]"
    Any offers?

  • Configure sharepoint 2013 with Microsoft exchange 2010

    Hi,
    I am want to configure SharePoint 2013 with Microsoft exchange 2010.
    Please let me how can I integrate these server to Send/ Receive domain E-mails.
    Thanks,   
    C Mahone

    For email integration there really isn't anything special about Exchange 2010 vs. any other mail server.  Check the links here on configuring Incoming and Outgoing mail in SharePoint:
    http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Can't configure Airport Extreme with IP 192.168.0.1 after software update

    Hi there,
    after updating my ax with utility software 5.3.1 and firmware 7.3.1. The software didn't allow the dhcp configuration to stay at IP range from 192.168.0.40 to 192.168.0.200
    The message said that this is not a valid IP.
    The configuration was working before without any problem.
    After several tries I changed to 192.168.1.40 and 192.168.1.200. Now I was able to save the changes. And the airport is working well.
    But I can't go back to 192.168.0
    But I need to use 192.168.0 for a tunnel to connect to my wifes company.
    Configuration:
    Seperate Modem with DSL.
    Connecting over PPPoE
    Activeted WLan
    Connected computers over Lan and Wlan
    Can anybody help?
    Thanx
    Stephan

    by-feet, Welcome to the discussion area!
    AFAIK the AirPort Extreme base station (AEBS) has always forced the 3rd digit to be a 1 (one), as in x.y.1.z.
    Could it be that you previously had the AEBS to operate as a bridge and your "modem" was actually suppling the IP addresses?

  • Can't configure airport express with laptop after 10.5.6 update

    I can't configure airport express with laptop after 10.5.6 update
    the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
    Other computer gets to the configuration screen without problem.
    And the airport utility describes the airport express like this: syAP.802.11format

    I downloaded the airport utility and re-installed
    and the problem was solved

  • Configuration of UWL with Abap webdynpro

    Hi,
    We are doing configuration of UWL with Abap webdynpro. Our purpose to launch Abap webdynpro application , once clicked to a worlitem in UWL iView. we are unable to do due to following errors.
    We have done in this way.
    1.Created ECC system in EP
    2.register the uwl.webflow
    3.create ABAP iview(for test purpose still getting error when preview) (N/A)
    4.clear cache
    4.import xml file
    <ItemType name="uwl.task.webflow.TS91000006.UWLECCCLNT530" connector="WebFlowConnector" defaultView="urliview" defaultAction="viewDetail" executionMode="pessimistic">
          <ItemTypeCriteria systemId="UWLECCCLNT530" externalType="TS91000006" connector="WebFlowConnector" />
          <Actions>
            <Action name="launchWebDynProABAP" handler="SAPWebDynproABAPLauncher">
              <Properties>
                <Property name="WebDynproApplication" value="em_wipm_app" />
                <Property name="WebDynproNamespace" value="kgo" />
                <Property name="System" value="UWLECCCLNT530" />
                <Property name="DynamicParameter" value="WI_ID=${item.externalId}" />
             <Property name="display_order_priority" value="5" />
              </Properties>
              <Descriptions default="" />
            </Action>
          </Actions>
        </ItemType>
    5.Getting error,when I click task to perform dynpro abap screen.
    6.WI_ID not been received.
    Plz let me know the solution.
    Thanks,

    Hello,
    I think you have to import the xml-file before clearing the cache again. Your new xml-file needs a higher priority then the default view.
    You have just defined a new ItemType in your new xml-file. I am not sure, but I think that you will have to define in this file also a new view for this ItemType. Because otherwise it is not defined how this new ItemType should be shown.
    Regards,
    Iris

Maybe you are looking for

  • Cannot copy file from backup DVD to HD folder

    Whenever I finish a project, I had burn the various files (movie, text, pictures, pages, etc.) onto DVDs to free up hard disk space for present projects. Usually, I would use a disk image to burn those DVDs. Recently, I needed material from those DVD

  • HT204053 how do i get icloud to work on my P C windows 8

    i was told i could get the icloud on here and play the games

  • Artist photo missing from some artists

    I recently realized that the music artists on my iPhone(5s) have pictures of themselves. But not all of them. Sometimes, at first they don't have a picture (it just shows the album artwork) but it appears after some time. What should I do if I want a

  • Restrict user on custom report by using P_orgin

    Hi I have a requirement of restricting the view of a custom HR report based on Personnel Area(PERSA). I am using the standard authorization object "P_ORGIN" and  call the following in my code, still I am not being able to restrict the view of the rep

  • Service Pack 1 - Your Results?

    SP1 is out! Who wants to go first and take one for the team? Your experience and farm configuration would be much appreciated.