Configured 2 vcpu, but domU has only 1 vcpu

Hi everybody,
i have an OVM2.2 System with 2 DomU (OracleLinux 6.1) running. All works fine, but sometimes the DomU freezes and i cant connect them by console or ssh. On Dom0 i see, that DomU-CPU is 100%. I monitored some Xen Parameters by using xm list command on Dom0. When the error occurs, i see that the vcpu is only 1, but i have configured 2 vcpu.
On both DomU run MongoDB replication with Shards.
Has anyone a idea?
Greetz Tim

Is he using Tiger or Leopard? I have the same issue with my Macbook that has Leopard loaded, but my wife's Macbook connects fine.

Similar Messages

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

Bought new car with 30 pin connector but shuffle has only a 3.5mm

bought new car with 30 pin connector but shuffle has only a 3.5mm. I'm not sure apple has a connector.i need a 30 pin female to a 3.5mm connector to o from car to shuffle.

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Unless you bought the iPad directly from Apple in the last couple of weeks, you likely cannot exchange your 3G for the 4G.

Downloaded, but File has only close as a selection. How do you open a doc?

Downloaded, but File has only close as a selection. How do you open a doc?

I am sorry which Adobe software or service are you referring too? Which operating system are you using?

Tried to use PixelMator as default external editor but iPhoto has only final cut pro as external editor and won't let me change?

I tried to set up Pixelmator as external iPhoto editor bot only option in Preferences> advanced> edit photos is iPhoto or Final Cut Pro?

You have previously set FCP as the external, editor - in the iPhoto preferences select FCP again and a window will open for you to find and select Pixelmator - if that a photo editor ?
LN

Lightroom won't open - I get an error message....is open in another application.....It isn't and I can't progress from there. It allows me to open a different catalogue such as April 2015 but that has only 2 photo's in it ? Any suggestions ?

Can anyone help ?

1. Open Windows Explorer (Windows) or Finder (Mac).
2. Open the folder that contains your Lightroom catalog.
3. In that folder, look for a file with the .lock extension. If your catalog is named Lightroom 5 catalog.lrcat then the file will be named Lightroom 5 catalog.lock.
4. If you find such a file, highlight the file and delete it. You do that by pressing the delete key.
5. Close Windows Explorer or Finder.
6. Start Lightroom as you normally would.
In case you don't know where your catalog is located, if you are using Windows it will be located in Pictures\Lightroom. I'm not sure what the path is for the Mac.

I got a new computer, told it library was on external hd, no problem. A lot of artwork was missing though (NOT manual artwork, only previous artwork I'd asked itunes to find). I ran 'get artwork' but it's only asigned artwork to the1st song in each album

So, I got a new computer. As my itunes library has gone through a few in its time, it lives permanently on my external hard drive, as this generally makes moving to new computers hassle free. I told my freshly intsalled itunes on my new computer where to find the library and it got all my songs, movies etc no problem. However, some albums were missing artwork (NOT any of the albums I had ever manually added artwork to, thank god, these all seemed to be intact, jut ones where itunes had previously got artwork for me). I asked itunes to get missing artwork, as is par for the course. This it did, but it has only installed artwork for one song per album (generally the first song, or the lowest numbered track for incomplete albums, as far as I can tell).
It does not acknowledge these songs as missing artwork when I create a smart playlist but, erm, they are - the artwork doesn't show up on the display in the bottom LH corner or in the info tab. WHY? When I've added new albums 'get artwork' has always added artwork for EACH song on the album in every previous itunes I've ever had. I don't get it at all.
I appreciate it might be irreperably messed up, but please don't reply with any manual adding solutions. I have over 25,000 songs in my library and to go through and manually ask itunes to add artwork to each song (apart from the first on the album which already has it) would take SO LONG it makes me want to die inside.
I can't find anything else on this. Other people have had issues with itunes match and devices, but these songs don't even have artwork on itunes, let alone on my ipod, iphone etc.

Well my first guess was wrong. The line that failed is the one that writes out the image to disk. I've not revisited the code for that script for ages, but it seems I did add in an extra test for missing files a little while later, then forgot to upload the change. I can reproduce the error message if I deliberately rename a file to confuse iTunes so that seems the most likely reason for your problem with the script. I've uploaded a new build of CreateFolderArt which should work better.
See FindTracks for a tool to repair broken links. You should probably get that issue fixed first.
I know what SPSS stands for but that is all I know about it.
tt2

I have just synced my iphone4 it has only synced part of my music not all of it saying they can't be found although they are in my library

i have just synced my iphone4 but it has only synced part vof my library saying it cant find songs.

You can turn off in-app purchases on the iPad via Settings > General > Restrictions > In-App Purchases 'off' - depending upon the iOS version on the iPad you might also have a Require Password setting on the Restrictions screen which you can set to 'Immediately'
There is a copy of the iPad manual here, which you can download : http://support.apple.com/manuals/ipad/
And more info about restrictions : http://support.apple.com/kb/HT4213

Laptop HP 14d-006La has only one audio jack (mic/headset)

Laptop HP 14d-006La has only one audio jack (mic/headset)
How can I solve this?
I need to use my headset built-in mic instead of the laptop intengrated mic but it has only 1 audio jack, Can I solve this by software? or at least can I choose wether use the jack as mic or use it as external speaker?
Thanks in advance for any help

Hi EdgarNaranjo,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 14-d006la Notebook and having issues with connecting a microphone. Audio-out (headphone)/Audio-in (microphone) jack connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices. Be sure that the device cable has a 4-conductor, a connector that supports both audio-out (headphone) and audio-in (microphone). Here is a document on connecting a microphone.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

A music album is listed multiple times in my library but each listing only has a few songs in it-not the full listing. How can I combine them into one album and get rid of other duplicate listings?

Several music albums listed in my IPhone 5 music library are listed multiple times, but each one only has a portion of the songs listed. How can I combine them to make one album?

First....Thank you so much for your prompt reply. I am sorry for not getting back to you regarding your suggestion-I had computer issues that just got resolved. Also, this is my first foray into online chat rooms so I have a lot to learn to precisely state my issue! I did as you suggested and all the songs list the same album when I go into each song's "get info". However, I am not sure how to edit as you suggested. When I downloaded this album originally, for some reason it broke up into several albums each with different songs from the original album. I am trying to consolidate them back into one album in my library. I would greatly appreciate further assistance if you can. Also, I do not use "the cloud" to store any data and would like a good source of info on how to do this. Thanks so much for your patience!
SueZoo

I bought an Apple TV but my HDTV has only one HDMI outlet. What do I need to operate the Apple TV and my Uverse wireless network. I bought a four outlet hub at Best Buy but I can't't figure it out. Do I need something else?

I bought an apple TV but my TV has only oine HDMI outlet, so I have to unplug it when I want to watch regular TV. I bought a four plug hub at Bestbuy but can't get it to work.
Is there something else I can use?

hdmi spillers and switches are hit or miss some work some don't

My apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. can't restore.

my apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. the only way to unfreeze it is by detatching the ipod or resetting with menu/centre (until it loads up again, where it immediately unfreezes and comes up with a load of messages saying "cannot read iPod" and when i try and restore it by pressing menu/centre button while it's plugged in, it says "cannot restore as it is being used by another program" or "error 1415". Any ideas how to sort this out? hope i haven't majorly screwed it up. thanks.

Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.

Help! When I try to purchase a song from iTunes and have agreed to the terms and conditions, it then tells me that my session has timed out... but I've only been trying for a few minutes. I can't buy songs if it keeps doing this!

Help! When I try to purchase a song from iTunes and have agreed to the terms and conditions, it then tells me that my session has timed out... but I've only been trying for a few minutes. I can't buy songs if it keeps doing this! Does anyone know why it's doing this and how to fix it? Thanks!

Hi mterry1723, one solution that might be worth trying is this:
- Close iTunes, if it's open
- Open Safari and got to 'Preferences'
- Select 'Security' on the top
- Untick all the security options in the menu
- Click the 'Show Cookies' button and look for all the 'apple' entries in the left-hand column.
- Highlight them (select them collectively) and press 'Remove'
- Now open iTunes and buy the song as usual.
- You may be asked to do the same security process as before, so do as asked.
- Hopefully, the security check will now have accepted your answers and start downloading the song as normal.
Remember to re-tick all the required security options you had just un-ticked in Safari preferences. You don't need to bother about opening the cookies again.
I hope this has worked for you and my profoundest apologies if it has not. Worth a go, though!
I did see this thread: https://discussions.apple.com/message/18259935#18259935 which may be of more help, mainly the last entry by 'c2boyd'
Message was edited by: Bongomal

A different question for "Old Comm Guy" about that quote for G4 PCI "YIKES" machines, mine has only 5 led's, but do fit the lighting sequence listed.

My G4 400 Mhz PCI "YIKES" machine has only 5 led's, none in DS4 or DS5, nothing there but the un-molested sodlier bumps (never has anything been there), and my lighting sequences are 7 & 8 are on together, the others are dependant upon keystrokes or other demands (mouse, etc.).
There are seven diagnostic LEDs on the Power Mac G4 (PCI Graphics) logic board.
DS1 = ATA drive activity
DS4 and DS5 = USB power for downstream devices (There is no DS2 or DS3 on the board.)
DS6 = Ultra ATA bus activity
DS7 & DS8 = Power Indication
In a working unit, these LEDs should be in sync with each other: both on or both off. If one LED is on and the other is off, there is a problem.
DS9 = CPU Bus
Now I have a problem that started when I opened the side to check the led's in operation, side was open for 6 or 7 minutes and I got the screen of death, darkened, need restart, multi languages. .... I had just cured the start-up problems I was having for a month, 10 days ago. It was the powered USB hub plugged into the machines back panel, instead of the K/B port, I did have the mouse to the K/B and hub to back of machine, swapped locations and it was fixed, even the dead printer came to life and began printing (hadn't worked for 10 months !!)
What cuased the "screen of death" was traced to a memory dimm / ram stick that died, a PC133, 256MB made by 16X8 (or XB), I swear I wasn't dragging chains over the M/B, or anything really stupid, (I ain't the sharpest knife in the drawer, but not dumb either).
The "death screen" has caued a big headache, very hard to get to Applejack, open firmware, ect., I have, but not with any consistancy, did them, did DU test & verify, all passed "GOOD" or "no problems", all this was done in "safe boot mode", but I can't get to "regular mode" after restart !! ... it just sits on the gray apple screen w/o the spinning gear / wheel for hours !!!
Any ideas would be nice to hear, I plan on doing a re-install or repair / restore from / with the install DVD tomorrow.
And a link to info. of which ram / dimm memory sticks I might use from the other machines I have here, a G3 B&W, G4 QS 800 DP, etc. what will interchange ?, if any ? ........... Thanks for any input you may have, ..... wayne146 .....
I need some sleep, this has given me a massive headache, all because I read that quote and knew my lights didn't quite match it. ..... If only I had not cared, I migth not have gotten in such a bind / blunder, stupid me, I could resist it, I had to look for a compairison.
signing off for a few hours ....... wayne146 ..........

Good Morning, old comm guy,
Well I tried following your instructions to the letter, as best my limited knowledge would take me.
I opened the "terminal window", then "terminal preferences", the proper radio button was already checked for the phrase you indicated, and the insert line / window had "/bin/bash/", grayed out in it, below that is the "declare terminal type" that was set to "xterm color", so I couldn't change the grayed out window, but I could make selections for "declare. term. type" ... I left that as it was at "xterm color".
In the bottom of the Term. Pref. window is a "Open a saved term. file ...." and a window to enter a selection, when I clicked on "select", it open a "finder window" ,<applications> with almost everything grayed out, not knowing what to do, I backed out of the finder window, and also I can't just type a command into the "open a saved term. file" window, it must be done with the select button.
So basically I'm saying this Unix stuff is all Greek to me, I would need more detailed instructions to follow to the letter, for me to get through this with any success.
And this is weird, while I was working in Yahoo mail and here in discussions I was in "Safe Boot" for several hours, with several restarts in "Safe" (the only way I could do anything) I was swapping and checking a few different RAM sticks with the diagnostics in "about this mac" (one had died when watching the led's). the one that died, return to the living & working world, ??????? ..... and this G4 400mhz "YIKES" machine, STARTED FUNCTIONING PROPERLY AGAIN (?????????????) SHUTDOWN W/ K/B BUTTON, RESTART W/ K/B BUTTON, So weird !!!
And anther bit of weirdness is that while the Apple Tech. info says this uses PC 100 sdram, every stick of memory in this machine has stickers on them from different makers saying that they are PC 133 sdram of 256 mb. ??? ..... Can this be true ?, has this thing altered itself or altered the RAM, to work with each other ???
After it started working "properly" (?), both Firefox and Safari crashed many times and often, so I dumped Firefox (3.6.19) and reloaded a fresh FF 3.6.19, as I may have done something to them by accident in my panicing and buggering around, even had a Screen of Death 1 or 2 times, and it restarted with only a push of the front reset button, restarted as if it was just turned on with no problems lurking in it's past. .... Also weird !!! ?????
The New FireFox (3.6.19) hasn't crashed since the new install, that maybe OK now, time will tell, ........ wonder if the wrong ram was causing browsers to crash ???? ... or is the ram wrong ??... why is it working ???
All the Ram stick were bought from "Chris", the Apple Expert @ RE - PC, here in Seattle, he also sold me this YIKES machine, so there was no mistake as to what I wanted the RAM for.
I have a spare G3 B/W 450Mhz machine that also has pc 133 sdram in it as well, same thing with it, bought from "Chris", and the Ram in it too. It only has OS 9.2.2 on it, I need to do the work around to put Tiger 10.4.11 on it. Later .......
Well what do you think ??? ..... It's alot to process, take your time,
Please review this babbling I have put forth, it could be written a little clearer, but I have read it over twice and it makes sense as I read it (of course, I know what I meant when I typed it)......
.........Thanks for your time and help. ........wayne146 ....... (all nighter again, going for a nap, back in 4 - 5 hrs.) ...............wayne146 ........

I have an iPad that has one app that loads to only 72%. Apple tells me that the app is no longer available in canada but it has content that I paid for. How do I get the app to work again?

I have an iPad that has one app that loads to only 72%. Apple tells me that the app is no longer available in canada but it has content that I paid for. How do I get the app to work again?

If it's not available in your country and you do not have a copy of it in iTunes backed up on your computer, you don't.

Configured 2 vcpu, but domU has only 1 vcpu

Similar Messages

Maybe you are looking for