Configured Individual PO scenario in SAP SD

Hi Gurus,
I was configured individual PO scenario and also tick mark in item category as create PO automatically.
It is working fine and PO is also created successfully.
Now as per client requirement in dellivery address they want ship to party address so for that i want to pass somewhere address number field into BAPI or ALE or something.
Any one suggest how i will achieve the same through dome BAPI changes or enhancement.
Regards,
Chirag

Hi,
If a PO is created then in the PO you can view the Ship to Party to be delivered.
or from the SOld to Party arrive the ship to party from KNVP and get the address from KNA1\
Regards,
Saju.S

Similar Messages

  • CO-product configuration in REM scenario

    I am trying to configure co-product scenario with REM process. Is it possible?
    If any one worked on this scenario please let me know what are the special consideration we need to take or any SAP note available?
    Thanks in advaice.
    Rajesha Vittal

    in HELP.SAP.COM is the answer.
    Product Cost Collector
    Definition
    Cost object in Product Cost by Period that collects the periodic actual costs incurred in the production of a material. When you use a product cost collector, the product is the main cost object.
    Use
    Product cost collectors are independent of the production type. This means that you can collect actual costs on product cost collectors in the following production environments:
    In order-related production (that is, when you are using production orders) when you want to analyze the costs by period rather than by lot
    In process manufacturing (that is, when you are using process orders) when you want to analyze the costs by period rather than by lot
    Repetitive manufacturing
    In repetitive manufacturing you always use product cost collectors as cost objects.
    Product cost collectors are available from Release 4.5A onwards. In earlier releases, the costs of repetitive manufacturing materials were collected on production cost collectors. From Release 4.5A onwards, production cost collectors are converted into product cost collectors. For information on the conversion process, see Converting Production Cost Collectors into Product Cost Collectors.
    Order splits for production orders
    When you split production orders, the costs for the parent order and child order are allocated to the same product cost collector.
    See also: Order Splits in Cost Object Controlling
    Constraints
    Product cost collectors cannot be used for the following objects and production environments:
    Manufacturing orders that settle to a sales order item if you are using a nonvaluated sales order stock in sales-order-related production
    Sales-order-related production with a valuated sales order stock, except in repetitive manufacturing environments
    Engineer-to-order environments
    Manufacturing orders that are part of a collective order
    Joint production
    Joint production is a production process that yields two or more products in a single production run. In the Product Cost Controlling component (CO-PC), there are a number of special processing requirements in joint production environments regarding Product Cost Planning (CO-PC-PCP) and Cost Object Controlling (CO-PC-OBJ).
    In shop floor control, a manufacturing order (usually a process order) is created to manufacture co-products. In the manufacturing order, co-products are carried on the order items.
    In Cost Object Controlling, actual costs are collected on the header of the manufacturing order. At the end of the period, the actual costs on the order header are distributed to the individual order items. Work in process and variances are calculated at the order item level. The order items are then settled.
    Integration
    In joint production, the system normally accesses master data of Production Planning for the Process Industries (PP-PI) such as the master recipe and materials list, or master data of Production Planning (PP) . To distribute the planned and actual costs to the co-products, the system uses the apportionment structure that can be specified the material master record or in the manufacturing order itself.
    Terminology
    Co-product
    You specify that a material is a co-product by selecting the Co-product indicator in the MRP view or costing view of its master record.
    Fixed-price co-product
    A fixed-price co-product is a special type of co-product.
    Primary product
    You specify that a material is a primary product by selecting the Co-product indicator in the MRP view or costing view of its master record.
    Process material
    A process material is a nonstock material that is used in the R/3 System to represent the process by which co-products are produced. Instead of the primary products, you can enter a process material in the recipe header and in the order header.
    Process materials have material type PROC.
    By-product
    A by-product is a product that is produced incidental to the production process of other products. You enter by-products in the material list of a primary product or process material with a negative quantity.
    You do not set the Co-product indicator in the MRP view or costing view of the master records of by-products.
    Intra material
    Intra materials only exist temporarily between two processing steps. Intra materials appear in the material list as items of category M, but are not costed.
    If the process is interrupted because of a malfunction, however, intra materials may have to be transferred into inventory. In this case they are valuated with a price in the material master that is selected through the valuation variant for the valuation of goods received.
    Intra materials have material type INTR.
    Circulating material
    You can specify whether the cost of a circulating material should be included in the material list. The system selects a price for the circulating material from the costing view of the material master record.
    If the circulating material is flagged as relevant to costing, the material costs appear in the itemization twice: once with a plus sign and once with a minus sign. The balance is the material input costs.

  • How to configure bulk breaking articles in SAP retail

    hi frnds...
    This is my client needs...
    How to configure bulk breaking articles in SAP retail for hyper market..
    Scenario is like this... Ex: for MEAT
    There should be a Parent article & child articles process.
    i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
    Brest bone - 5kg     - A
    leg pieces - 2.5kg   - B
    wings - 2.5kg         - C
    P - 7.5kg                 - D
    Q - 10kg                 - E
    R - wastage - 50kg - F
    these child articles wont consider for inventory
    So how to configure this scenario in SAP Article master & to run this process.
    Pl help me out with scenario

    Please have alook at
    [http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
    Material type WERT is correct.
    In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
    Further in the Site master WB02, you can control it on MC level.
    regards
    B

  • Mapping of Scenario in SAP

    Hi Masters,
    I would like to know how to map the scenario in SAP.
    Client is 1000.
    There are 3 companies 2000, 3000 and 4000.
    Co 2000 is involved only in manufacturing. It receives raw material from Vendors and then manufactures in its own plant 2001.
    Co.3000 is involved only in logistics. It takes delivery of the Fgoods from plant 2001. Ownership of the Fgoods transferred from 2000 to 4000. The Fgoods are stored in Warehouse (3001), which is owned by Co.3000.
    Co.4000 is involved only in marketing of the Fgoods. It receives Orders from Customers and deliveries are made from Warehouse 3001. Bills are made by Co 4000 and payment collected.
    Co.3000 owns Warehouse alone and acts like a C & F agent. Co.3000 gets paid by Co.4000 on the basis of the FGoods value that is stored and taken care.
    How to map the scenario in SAP.
    Thanks in advance.
    Vaidee

    Ok,
    Then Configure CCode 2000 and make one Plant 2001 and assign it to 2000. Make one sales organization 2001 for this. And also some DC.
    Then Configure 3000, and make one Plant ( for storing ) plant and assign  warehouse number 3000 to that plant.
    Then configure 4000. and make one plant ( for distrbution of goods) , make one sales org 4001, and DCs and divisions.
    Now the process :
    You wil create inter company STO between 2000 and 4000. And the Warehouse of 3000 ( may be ) assigned to the plant of 4000.
    Make Company 3000 as C and F agent and assign as a partner.
    Rest all functionality can be done as per standard.
    This is my personal view, other experts comments are also welcome.
    Thanks,
    Raja

  • Plz Give me real time file to file scenarios in sap xi

    Hello Experts,
       Can any one give me the real time file2file scenarios in sap xi. And differnet file structures
    and different 'File Content Conversion'  objects. Explain me different approch for file2file with different scenarios.
    Thanks in advance.
    Arjun.

    HI Arjun,
    Go throgh the following links for File content conversion in the sender side as well as receiver side
    File content conversion sites:
    Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
    NAB the TAB (File Adapter)
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
    How to send a flat file with various field lengths and variable substructures to XI 3.0
    Content Conversion (Pattern/Random content in input file)
    Content Conversion ( The Key Field Problem )
    File Receiver with Content Conversion
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Please see the below links for file content conversion..
    The specified item was not found. - FCC
    File Content Conversion for Unequal Number of Columns
    File Content Conversion for Unequal Number of Columns - FCC
    Content Conversion (Pattern/Random content in input file)
    Content Conversion (Pattern/Random content in input file) - FCC
    XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
    Regards
    Sridhar Goli

  • Configuring the  Synchronous scenario in XI

    Hello everyone!
    I want to configure a "Synchronous" scenario wherein when XI sends a message to a Marketsite, it waits for a response, then send back the response to the SAP system.
    My question is this, would I need to configure a "sender adapter" in order to pick up the response, or will the response fire back automatically as long as I have configured my message interfaces as "synchronous"?
    What might I need to add in the Integration Directory in order to make the synchronous scenario work?
    Warm regards,
    Glenn

    In this case you want a response back from file. This is not possible as file adapter does not support sync scenario.
    If you use the adapter that supports sync scenario like RFC, SOAP etc, then you have to create interfaces as follows:
    Outbound Synchronous interface for sender to XI
    Inbound Synchronous for XI to receiver.
    In each of the interface you have to specify the request and response message types.
    if it helpful reward points are appreciated

  • Configuring sync lookup scenario without receiver

    Hi experts,
    I want to do the following scenario and I'm not sure, if this is possible:
    I have a sync SOAP call to SAP PI. The request message is mapped to the response message of the sync call. Inside the message mapping, I'm executing a JDBC Lookup, which retrieves all necessary data and puts it into the response structure.
    The response should be posted back to the caller. My difficulties are in configuring such a scenario, because there is no actual receiver.
    Is there a way to do this in SAP PI? I can't use sync JDBC receiver channel, due to necessary JOIN statements in SELECT (I would have to use XML SQL and JOINS are not possible with that as far as I know).
    Best Regards
    Sven

    >I can't use sync JDBC receiver channel, due to necessary JOIN statements in SELECT (I would have to use XML SQL and JOINS are not possible with that as far as I know).
    It is possible to use SELECT QUERY in the receiver channel. You can do JDBC lookup during sync message mapping.
    Example:
    <StatementName>
    <anyName action=u201D SQL_QUERYu201D>
    <access>Place your sql string here</access>
    <key>
      <placeholder1>value1</placeholder1>
      <placeholder2>value2<placeholder2>    
    </key>
    </anyName > 
      </StatementName>
    refer this
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
    Note: You have to create a separate JDBC reciever comm channel for your jdbc lookup. Hope you know that.

  • B2B scenario in SAP PO

    Hi Experts,
    We have to start with the development of B2B scenario in SAP PO 7.4.
    The scenario is as mentioned below :-
    SAP ECC ------> SAP PO -----> B2B VAN Provider----> (various customers)
    After going through some of the blogs, listed few points which seems to be confusing to me -
    1) How the TPM configuration could be done in this case? We tried with one doc but its somehow confusing.
    (http://scn.sap.com/community/b2b-integration/blog/2014/01/28/trading-partner-management-part-1)
    2) How the configuration will be done? Creation of party, agency and schema? Identifiers tab of the communication channel.
    (http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660?QuickLink=index&overridelayout=true&5003637721826
    Gone through the above mentioned link, got confused about the configuration part.
    As per my understanding,
    Sender party --> no need to create as landscape is same.
    Receiver party --> Mandatory to create, but what needs to be put in Agency, Schema and Value?(around 50+ customers for one VAN)
    Is my understanding correct? Please correct if i am wrong.
    Please guide, if someone has worked over B2B SAP PO 7.4.
    Thanks!
    Br,
    Nidhi

    Hi Nidhi,
    for your second question integration to VAN. you only need to maintain the identifier (AS2 identifier) for VAN and VAN will distribute/route the message to customer.
    regards,
    Harish

  • SAP HCM scenarios with SAP Portal 7.0

    Hi!
    I would like to integrate the SAP HCM scenarios (like ESS, Talent Management, Workforce Management) from SAP ERP 2005 IDES into SAP Enterprise Portal 7.0.  
    Questions
    1) Where can I find the appropriate technical documentations?
    - customizing steps for SAP Portal and SAP ERP system
    2) which SAP course cover these topics?
    Thank you very much!
    regards
    Holger Thomasson

    for customizing steps see the below links:
    [LSO configuration path|http://saphrexpert.blogspot.com/2009/01/lso-configuration.html]
    [ESS configuration paths|http://saphrexpert.blogspot.com/2009/01/ess-configuration-steps.html]
    [Configuring personnel actions|http://saphrexpert.blogspot.com/2009/01/configuring-personnel-actions.html]
    [benefits configuration paths|http://saphrexpert.blogspot.com/2009/01/benefits-configuration.html]
    [Configiration paths for PA|http://saphrexpert.blogspot.com/2009/01/config-paths-for-pa.html]
    [Configuration paths for payroll|http://saphrexpert.blogspot.com/2009/01/payroll-in-config.html]
    [Configuration for Time Module|http://saphrexpert.blogspot.com/2009/01/time-module-config.html]
    [Links to configuration PDF's|http://saphrexpert.blogspot.com/2009/01/links-to-pdfs-from-sap-website.html]
    [CATS configuration|http://saphrexpert.blogspot.com/2008/12/cats-configuration.html]
    [OM configuration steps|http://saphrexpert.blogspot.com/2008/12/om-configuration-steps.html]
    For ESS - SAP offers the course HR250.
    LSO os HR270
    Training and events management is HR515
    HR510 is for Personnel Development
    HR540 is for Compensation Management

  • Configuration to send mail from SAP R/3 to SMTP ; Pls help

    Hi All,
                Could any one please send me the steps to configure the MAIL setup in SAP R/3 to SMTP (Third Party).
    Thanks in Advance,
    Sunil
    [email protected]

    HI Suni,
    Please follow the link below very helpful...
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=email&cat=sdn_media
    1. tcode SCOT
    2. double click SMTP>> check mark "Node in use" >> Mail Host : "mail.yourdomain.com">> click "internet set"  if you want all email in/out, add * under address area. save/green check mark.
    3. go back to SCOT >> Settings >> Default Domain,: it should be "yourdomain.com" >> SAVE.
    4. View >> Jobs: Click Create button >> name it 'SENDMAIL'. green check marK >> click preodic, run every 5 min or 3 minz depending on your situation or load.
    That's it. very simple.
    Thanks,

  • Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

    Hi Experts,
    Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
    What objects i can skip.
    My PI system is 7.3 dual stack.
    I have seen below blogs, still its confusing to me.
    When and how to create an scenario in SAP PI without mapping objects.
    Pass Through Scenario with no Mapping in PI 7.1
    Appreciate your help on this.
    Regards,
    Mohan.

    Hi Mohan
    In pass thru interface you don't need to create any ESR objects, only ID objects are required.
    Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
    Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
    Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
    Regards
    Osman

  • Webinar: How to implement secure scenarios with SAP NW PI 7.1

    SAP Intelligence Platform & NetWeaver RIG APJ Expert Call
    Dear valued SAP Experts,
    Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, August 18.
    The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers  during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at
    thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
    Tuesday, August 18, 2009:
    How to implement secure scenarios with SAP NetWeaver Process Integration 7.1
    Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
    This event will feature Makoto Sugishita with the SAP Intelligence Platform & NetWeaver Regional Implementation Group.
    Makoto provides the following abstract:
    In this session you will learn more about the core security concepts that are provided with the service-oriented architecture (SOA)
    management capabilities in SAP NetWeaver Process Integration (SAP NetWeaver PI). This session will cover main use cases and
    supported scenarios of secure SAP NetWeaver PI deployments. 
    SAP Connect Link: https://sap.emea.pgiconnect.com/I016095
    (no passcode needed)
    Dial in:
    For dial in details please register here http://www.surveymonkey.com/s.aspx?sm=EFeuZl9PxrwKOW5i5W556g_3d_3d
    Kind regards,
    Sarma Sishta
    SAP Intelligence Platform & NetWeaver RIG APJ

    hi,
    I'm making this a sticky thread till August 18 so it will have better visibility
    Regards,
    Michal Krawczyk

  • Configure Web Services in a SAP-IDES-System?

    Hello,
    I have access to a SAP-frontend on a SAP-IDES-System and now Iu2019d like to configure two Web Services in SAP. I think I can do this configuration with SPRO, but I donu2019t really know how and where.
    Is there a good documentation about Web Services in SAP IDES?
    Thanks a lot!

    Hi,
    Have a look at below link.
    http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/57/07813ee3d32b44e10000000a114084/content.htm
    I sure it will help you out
    Rgds
    Radhakrishna D S

  • How to deal these two scenarios in SAP.

    Hi All,
    My company is Software company.My company is having many clients.
    1)Whenever we require some materials for client project he provides us required materials and our company uses them for job, there is no change in state/value of tool, we  send back the tool after usage
    2)Our vendor will place the material at our place and we will pay
    the rent for every month or quarterly.
    how to deal these two scenarios in SAP.
    Regards,
    Purush.

    hi
    create new material type for this
    >1)Whenever we require some materials for client project he provides us required materials and our >company uses them for job, there is no change in state/value of tool, we send back the tool after usage
    u can just tick for quantity update for that material type in OMS2
    then u can take it using 501 Q
    >2)Our vendor will place the material at our place and we will pay
    >the rent for every month or quarterly.
    for this u can make quantity update as above and give the rent payment from FI side using FB60
    regards
    kunal
    updating

  • To migrate SAP business connector scenario to SAP XI.

    Hi,
       I want to migrate my IDoc-http sap bc scenario to sap xi.
    1:What the basic things do i need ?
    2:what basic steps do i need to perform to migrate a sap bc scenario to sap xi?

    Hi Shewta,
    from a BI perspective, please check the HowTo-Papers available in this area.
    You find them at:
    <a href="https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000073641&_SCENARIO=01100035870000000202">SAP Service Marketplace HowTo guides</a>
      Cheers
         SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Maybe you are looking for