Configurig FCC in Receiver File Adapter
Dear All,
It is a IDOC to FILE Structure where after mapping there are only two fields in the target structure and the occurrence is only once.
The two fields are - filename and data
<Message>
<filename>brand0412</filename>
<data>CO BLUE ALTERNATE Y</data>
</Message>
I would like to create a text file with the following requirements:
1) the name of the text file -> value of field filename -> brand0412.txt
2) the content of the text file should be -> the value of the data field -> CO BLUE ALTERNATE Y
i.e.
File name - brand0412.txt
Content - CO BLUE ALTERNATE Y
What are the parameters I should use for FCC?
Hi Rana,
You can use DynamicConfiguration to name the text file. You can find the Dynamic configuration UDFs on SDN. Here are few , modify as per your requirement.
Target file name using Dynamic Configuration
SAP XI Dynamic Configuration - Code Gallery - SCN Wiki
Dynamic File Name - UDF
Map as below :
Filename -> DynamicConfiguration UDF ->TargetMessage
Your target structure will look like
<TargetMessage>
<Message>
<data>CO BLUE ALTERNATE Y</data>
</Message>
</TargetMessage>
Select FileName in ASMA properties in receiver adapter.
Once you have done this , configure the receiver adapter using FCC parameter. refer below.
XI/PI: File Content Conversion for Simple Structure
Similar Messages
-
Tab delimitter in HeaderLine in FCC in receiver file adapter
Hi Folks,
I want to use tab as a field separator for (eg) NameA.Headerline.
instead of comma in file content conversion in receiver File adapter communication channel.
example:
Recordset structure : NameA
NameA.addHeaderLine : 3
NameA:headerLine : MaterialID,Price,Quantity
PS: In NameA.headerline i want to use tab instead of comma.
How can i do that?
Thanks
PrabaharanHi Beena,
could you explain on which context we should use that option:
NameA.addHeaderLine - 1 ( Header line with column names from the XML document )
what it does exactly?
Thanks
Prabaharan
Edited by: Prabaharan on Aug 21, 2008 12:02 AM -
Hi,
My scenario is proxy to flat file(FCC). The incoming structure has following format:
Header1
Item1
Header2
Item1
Item2
Item3
Header3
Item1
Item2
Control
Each Header can have multiple item fields. The last line is control record.
So the structure is like ::::: header, item, item, item, header, item u2026.., control.
what configuration should be done in FCC?
Thanks in Advance.
Regards,
MitenHi,
Please check some links on FCC
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
sainath -
FCC:Receiver File Adapter
Hi
This is regarding a FCC in receiver File Adapter
My requirement is as follows :
I have the following source structure
DT_Source
Structure
Field 1
Field 2
Field 3
The target file to be created will contain all the 3 fields mapped directly from the source.
but in additional to these 3 fields it will also contain 3 constants ..which aren't coming from the source.
Do I need to include that in the Target data type and map them as constant values in the mapping or can the addition of constant values be taken care of in the File Content conversion ?
thanks
DevThanks Shabarish
So you mean once i get a sample file , according to the blank spaces in the resultant i should have a corresponding field in my target Message type and map it toa constant white spaces ??
ok I have one last question
Can the FIle(on the receiver side ) be a mix of values which are fixed as well as variable lenghs ??
i.e
a typical line item in the file will be like this
Field1,Field2,Constant1, ,Constant2,Field3, ,Constant3,Field4,Constant4
where Field1 and Field3 are fixed length fields with the constants and field 4 and field5 are of variable lengths ????
thanks
Dev -
Receiver File Adapter with File content Conversion
I have a requirement to send 2 different files to the target directory. Source is the same and different mapping for the 2 files.
This I can achieve through multi-mapping but there is a problem. How can I use the File content for receiver File adapter which is using Multimapping.
The structure of the 2 files also different.Why would you need FCC on receiver file adapter? If you need different files to be generated from the source, you could create two receiver channels with different mappings and just add them to the same Receiver Detemination. Isn't feasible?
-
RECEIVER FILE ADAPTER FCC ERROR
Hi team
My scenario is a text file has to be picked up by PI, has to processe it and the receiver is Proxy and it has to get updated and sent back to FTP location.
i am using Sender File Adapter with FCC and Also receiver File Adapter with FCC.
Both the sender and receiver structures are same; i am using the same FCC parameters for both the sides.
in Receiver File Adapter i am getting the following errors
1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
please help me out
thank you
Edited by: vemugantivn on Aug 16, 2010 12:19 PMHi,
> 1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
> 2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
It is saying that you are not using the fieldSeparator parqameter.
have you provided the field separator parameter? if not then give like below
order_row.fieldSeparator : , (give what ever the separater you are using)
or
order_row.fieldSeparator : 10,5,... (if you are using fixed length)
Regards
Ramesh -
FCC Parameters are required in the Receiver File Adapter
Hi ,
Sorry for posting this question again.. my Structure is
MT_CADVICE_STRING
. . Batach -
1:Unbounded (Node)
. . .Header_String -
1:1
. . .Line_Item -
1:Unbounded (Node)
. . . .LineItem_String -
1:1
for this structure I'm geting data in the XML format.. .. my scenario is simple File to File scenario.. now i want to convert this XML to a normal Text file by using FCC in the Receiver file adapter..
and in the Receiver side i want the file in the bellow format: (each field i want to get in the separate line but at presnt I'm getting the continution of all lines I'm not getting the data in a separate lines..)
Header_string
LineItem_String
LineItem_String
Header_String
LineItem_String
so, any abody can help on this...
And in the Receiver Communication channel i keep the FCC parameters like as bellow :
RecordsetStructure : Batch,LineItem
Batch.fieldSeparator: 'nl'
LineItem.fieldSeparator: 'nl'
Batch.endSeparator: 'nl'
LineItem.endSeparator: 'nl'
For more information.. My source file is like bellow
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_CADVICE_STRING xmlns:nr1="urn:Test.com:SD:CAdvice">
- <Batch>
<Header_String>1 B 1110300014200804108218 36892.80 03 10.000 10.000 0.00 0.00 008000021720080410558000.00 91958.40 649958.40 0.00 649958.40 2678.40 1000003461100000346110000034611000003461123456 18 18 0.00 $</Header_String>
- <LineItem>
<LineItem_String>2 B 1110300014 1 000000000001234567000000000001 5.000 0.00 45000.00 10800.00.00 16.00 279000.00 0.00 rcl/ML0080200804100000000357 200804100.00 01 02 000000002.00 860.13321.00 $</LineItem_String>
</LineItem>
- <LineItem>
<LineItem_String>2 B 1110300014 2 000000000001234567000000000001 5.000 0.00 45000.00 10800.00.00 16.00 279000.00 0.00 rcl/ML0080200804100000000357 200804100.00 01 02 000000002.00 860.13321.00 $</LineItem_String>
</LineItem>
</Batch>
</nr1:MT_CADVICE_STRING >
Regards
JainHi jain
Provide as below definitely it will work,
RecordSet Structure : batch,Line_Item,LineItem_String
batch.fieldSeparator --- 'nl'
Line_Item.fieldSeparator -
'nl'
LineItem_String.fieldSeparator --- 'nl'
All your fields will come in a separate line.
Regards,
Sasi
Edited by: sasitharan on Jul 28, 2008 11:36 AM -
Problem with fixedlenthgs in receiver file adapter
HI,
I am doing XML to flat file scenario and using mutli mapping concept without BPM.
in the receiver file adapter I am using FCC with fixedlengths,then it generated just 3 output files out of nearly 100 source files.the errored one are succcessful in the SXMB_MONI and failing in RWB-->Message moni with waiting status and MDT says that XI_J2EE_ADAPTER_FILE ,Error Code PROCESSING_ERROR .
i tried in SDN and then found something like enable the disablesecurity check box in variable substitution parameters ,then I got 4 files out.
these are my FCC params for all structures:
struc1.fieldFixedLengths
struc1.fixedLengthTooShortHandling
struc1.endSeparator
and I tried with fieldSeparator then it gives successfully all output files.
so,where is the problem?I didnt understand?
any suggestion.
thank you,
regards,
Babu SriBhavesh,
I felt the same way,but assumed that ,in that way fixedlenghths wont work.
in my target structure most of the fields have 0-1 occurences ,and even in the source structure too.so,I think it might be the reason.Then I have to make all my about 60fields 1-1 madatory and using mapWithDefaultValue function, as my sources are optional.
you think it will work just using the "mapWithDefaultValue" function without changing my occurences to 1-1 in the target structure(mandatory)?infact I can try but ,cos of pain for changing like 60 fields....:) and even dont know which fields are causing the problem,so that we can apply "mapWithDefaultValue" function only on those fields.
thank you,
Babu Sri -
0 byte txt file using receiver File Adapter
HI,
My scenario is Flat File to Fixed Length File.
Mapping : Based on the condition Reciever node need to generated , In some cases it wont generate any node ( No data )
Receiver Communication channel : I used FCC for Fixed length Format.
Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:Message1' found in document', probably configuration error in file adapter (XML parser error)'
I need the receiver file to generate with 0 bytes when there is empty data.
can any one help on this.
ThanksHi,
>>Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
What happens in this case is, when you send a blank file to PI it processes but once it went to Receiver Adapter, it looks out for some fields because of the FCC settings. So it throws an error/exception because some fields are expected and it is not coming. Because of that you getting below exception.
Secondly, Once you send data with few values or fields it will process in Receiver file adapter FCC and if there is some error it throws error. this is why you getting exception in moni, and other places.
Regards
Aashish Sinha -
Receiver File adapter content conversion using StrictXml2PlainBean
Hi All,
For receiver file adapter i am using the module StrictXml2PlainBean, and also i mentioned the module configuration like this
parameter name parameter value
recordTypes Header,TransactionHeader,TransactionDetail,TransactionTrailer,FileTrailer
FileTrailer.endSeparator |\n
FileTrailer.fieldSeparator |
Header.endSeparator |\n
Header.fieldSeparator |
TransactionDetail.endSeparator |\n
TransactionDetail.fieldSeparator |
TransactionHeader.endSeparator |\n
TransactionHeader.fieldSeparator |
TransactionTrailer.endSeparator |\n
TransactionTrailer.fieldSeparator |
But when i send the idoc, The receiver CC is throwing an error
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: Transaction at XML element MT_DeliveryOrder,Transaction
My actual structure is
MT_DelvOrder
Header 0...1
Transaction 0....Unbounded
TransactionHeader 1..1
TransactionDetail 0...unbounded
TransactionTrailer 1...1
FileTrailer 0...1
The module is checking for the Transaction node,but i require the rest 3.
Same configuration i have done successfully with FCC without using the module....
So can any one suggest me where i am missing... why the module is pointint towards, the Transaction cant i ignore this node . and continue with the rest???
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 12:35 AMHi Rajesh,
The same FCC configuration was working fine with FCC and when i am using this module configuration i am getting the prob...
In the file i need the Header,TransactionHeader,TransactionDetail,TransactionTail,Filetrailer
my sample output file is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DeliveryOrder>
<Header>
</Header>0...1
<Transaction>0...Unbounded
<TransactionHeader> 1..1
</TransactionHeader>
<TransactionDetail> 0...Unbounded
</TransactionDetail>
<TransactionTrailer>1...1
</TransactionTrailer>
</Transaction>
<FileTrailer> 0...1
</FileTrailer>
Any suggestions will be great help...
I think i need to go with other options without using this module....
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 6:03 AM -
Error in Receiver File adapter using File content Conversion
Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
AparnaHi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit -
REG: File content conversion in Receiver file adapter
HI Gurus,
I have the scenario like proxy to file with content conversion
my message type for the source like this
MT_SOURCE
-----||
|---ROW
------------||
|---LINE
target strucuture also same
MT_TARGET
-----||
|---ROW
------------||
|---LINE
i am using the following FCC parameters in receiver file adapter
LINE.fieldSeparator = ' '
LINE.fixedLineWidth = 90
LINE.lineSeparator = 'nl'
LINE.fieldFixedLengths = 200
LINE.endSeparator = 'nl'
the output file show the data differently in note pad when compare to word
word output
dgepvs 023456987
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
notepad out put
dgepvs 023456987 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01
word output is the correct output wat i am expect but same out put i want in note pad can any help me out for this how can i resolve this
Thanks in advanceThere is nothing wrong in your content conversion parameters. This is pure editors interpretation for the next line character.
I would do in java program to fix this issue using '\r\n' You might want to try and see how that helps for notepad editor. -
Problem with File Content Conversion (Receiver FIle Adapter)
Hi Experts,
I have following structure in receiver side:
MT_Test
F1
F2
F3
F4
Now I want a CSV file in target side in below format:
F1,F2,F3,F4
I have provided below config in receiver file adapter under content conversion tab:
Recordset Structure : MT_Test
MT_Test.fieldSeperator= ,
MT_Test.endSeperator= 'nl'
But this is generating blank CSV files in target directory..What might be the reason.. I have checked the msg in adapter engine, the XML file is correct and contains valid values for the fields..Its something like below:
<?xml version="1.0" encoding="UTF-8" ?>
<MT_Test>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</MT_Test>
I should get CSV file as
Hai,Hello,Bye,Hi
But I am getting a blank file with above said config parameters in content conversion tab.
What might be the reason for getting blank CSV files in target side???
Thanks,
AdiHi Adi,
>>My target structure in below format:
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</MT_Test>
So, try to edit Data type and include hierarchy level above <F1>.
Finally your Target Structure will resembles like this.
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<Structure>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</Structure>
</MT_Test>
FCC Parameters will be like this.
Structure.fieldSeparator = ,
Structure.endSeparator = 'nl'
Hope you were clear.
Thanks,
Siva. -
Mapping problem due to FCC in sender file adapter
Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
KEY VBELN
VBELN POSNR
E2E24* CHARG
KEY
POSNR
CHARG
<b>*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24</b>
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in <i>FCC ignoer record set= true</i>
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
0201
0202 in white fields
thanks & regards
Ashutosh Rawat<b>Source payload</b>
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b><VBELN>0083662685</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083662648</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083673936</VBELN></b> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
<b>at target what required is</b>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900001</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900002</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900003</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900004</POSNR>
</item>
<item>
<b><VBELN>0083662648</VBELN></b>
<POSNR>900011</POSNR>
</item>
<item>
<b><VBELN>0083673936</VBELN></b>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
ashutosh rawat -
Email attachment name in sender mail adapter to the receiver file adapter
HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
VamsiHi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel
Maybe you are looking for
-
IPhoto 4 importing duplicate photos without dialog box opening
I often import pictures from my Canon PowerShot SD550 to more than one computer. I do not use iPhoto to delete photos after importing. Occasionally I need to import more recent photos to one computer before I have the opportunity to import older phot
-
Desesperately looking for ms-6786 ver:2 manual (or msi model corresponding)
hi after looking all over there i could't find the track to this "old board" manual ... worst of all is that this board comes from a used sell so : i have absolutely no idea about the msi model corresponding to this oem (ms-6786 ver 2 is said unknown
-
Is it possible to copy a user fm one client to another
Hi' Is it possible to copy a user from one client to another client? e.g., in our DEV we have two client say 500 & 201.A user say dev_user is present in client 500 with some authorization.Now i want the same user dev_user with same authorization
-
Hi there, i'm on OS X 10.10 , i can recieve calls from my iPhone 5s on my mac, but when i want to outgoing call from my MacMini , it shows me "Call failed" , it happened to me only on my MacMini late 2012 , on another computers (iMAC 27 2013 & Macbo
-
Do you have to have a Netflix account to use the app for iPad?
Do you have to have a Netflix account to use the app for iPad? Or do you just use you apple id?