Configurin​g Logical name of IVI with out using MAX tool

hi,
 I need to configure the Logic name of IVI by API(IviConfigServerCAPI.dll provided by IVI) With out using the MAX tool.Can any one tell me how to use this api to configure the logical name
Regards
Parthipan

It seems you have created a new thread for the topic here. Continue in that thread please
http://forums.ni.com/ni/board/message?board.id=170​&thread.id=430393&view=by_date_ascending&page=2

Similar Messages

  • Same file name from sender to receiver file adapter with out using UDF

    Hi All,
    I am working on FILE TO FILE. My requirement is same file name from sender to receiver file adapter. Is it possible to do using only Adapter Specific message properties?  i mean with out using UDF.
    Thanks
    Karthik

    Hi,
    >>>Is it possible to do using only Adapter Specific message properties?
    yes
    just enable Adapter Specific message properties in sender and receiver channel for file name
    and you're done
    Regards,
    Michal Krawczyk

  • I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

    I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

    My original question :
    I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

  • Adding data file with out using  brtools /sapdba

    Hi all,
    How to add data file to table spaces with out using  brtools /sapdba.Please let meknow.
    Satya.

    why would you do that? whats your requirement?
    You can use sql commands (I prefer doing it via brtools),
    example
    alter tablespace <name of the tablespace> add datafile '<path of the datafile>' size <size in Mb>M autoextend <on/off> next <size> maxsize <size>;
    regards
    Juan

  • Deletion of duplicates in the table with out using rowid

    How can I delete duplicates in the table with out using ROWID .

    hi
    sleect count(coulmnname),columnname from table
    group by columnname
    having count(columnname) > 1;
    find the primary key of the table
    apply the below query
    delete from table
    where (primary key,repeated column name )
    not in
    ( select min(primary key), repeated column
    from employee group by repeated column );
    use this in the primary key column use empid ,,,the repated column is ename
    empid ename
    1 sankar
    2 sankar
    try this one

  • How to queue custom events with out using af:calientListener.- onKeyUp.

    Hi,
    I have a custom component ( extending richinput text).
    defined a new attribute called "onkeyup" and added necessary logic in Renderer. Some thing like
    write.writeAttribute("onkeyup" , "handleEvent()");
    I rendered the java script code too ..... in my custom renderer. ( I neigther want to write java script in metaContainer of document tag nor wants to use resource tag..)
    and the handleEvent code is something like this.
    function handleEvent()
    In this method i want to write the code which pushes my custom event to the queue.
    some thing like this..
    component = event.getSource();
    AdfCustomEvent.queue(component, "customEvent",{payload:component.getSubmittedValue()}, true);
    event.cancel();
    Usually if use a clientListener then it will call the method {  handleEvent(event)  } passing event parameter so that we can get the source of that event.
    But as i dont want to use the clientEventListener.... as of now... i can't get the component because i don have the event object with my method.
    So could any one please letme know , how can i queue my custom event in to my customcomponent... with out using ClientListeners.
    Edited by: mchepuri on Nov 9, 2009 10:04 AM

    Hi,
    AFAIK, you cannot queue an event to the serverListener without a clientListener.
    -Arun

  • How Achieve timedseries calculations with out using AGO And ToDate function

    Hi,,
    1)
    How Achieve timedseries calculations with out using AGO And ToDate functionion
    this question asking in interview ..is it possible..?
    if yes please response as soon as possible..
    2) i have 2 cloumns Product and value...
    client requirement is they need ranks based on Value ..in dashboard .using dashboard prompt..edit box...if user enter any number (ex :5 ) report should show top 5 ranks if he enter 20 should be top 20 ranks..
    how to achive this ?
    thanks,
    raj

    Consider yor first question:
    1. Yes, we can create timeseries measures without using AGO and TODATE
    1. Create ALIAS of fact tabe in the physical layer
    2. Join the Time id from the ALIAS fact table with the YAGO_MONTH_ID column from your time dimension table (For calculating Year Ago variants) similarly join with MAGO_MONTH_ID column for Month Ago measures.
    3.Pull the ALIAS tables as an additional Logical table source in the Lgical layer
    4.Keep the mapping of the columns from the ALIAS table as its is
    5. For e.g If you pick Revenue from the Year Ago Alias table it will give you the "Prior Year Revenue"
    See if this helps you

  • BDC PROGRAM WITH OUT USING A FM?

    Hi Experts,
    I need wirte a BDC program for tcode PA30.
    i did the screen recording part using tcode-shdb.
    i need to use field i recorded as input fields.
    Now the main part is how to write code? with out using a class/method?
    class/method which i earlier used is class : CL_GUI_FRONTEND_SERVICES.
                                                             method: gui_upload.
    am not using ny flat file/xml file to upload?
    are there any function modules which i can use?
    and how to write code with out using FM?
    if any can solve  my issue would be very helpful...plz provide code...which would be more helpful.
    Thanks in Adv.
    Krrish.

    Hi,
       If you are migrating employee data, I would suggest you to do it through PA40 transaction rather PA30. systematic screen validations it will go through. If you dont want to use any FM and wanted to do using recording pls find the below code which will update the employee data through PA40 with call transaction method.
    SELECTION SCREEN
    SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE   text-001.
    PARAMETERS: p_plan TYPE ibipparms-path OBLIGATORY.
    SELECTION-SCREEN: END OF BLOCK b1.
    TYPES: BEGIN OF ty_error,
             pernr TYPE persno,       " Personnel number
             rel_obj_id(12),         " Related Object ID
             msg(200) TYPE c,       " To store Message
           END   OF ty_error.
    DATA: i_tplan TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
          i_intern TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
          i_error    TYPE ty_error OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF w_pa000,
           pernr TYPE persno,
           begda TYPE begda,
          END OF w_pa000.
    DATA: wa_plan LIKE i_plan,
          wa_messtab    TYPE bdcmsgcoll, " Messages
          wa_error      TYPE ty_error.  " Errors
    DATA: it_pa000 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
          it_pa002 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
          it_pa001 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE.
    DATA:  g_mode LIKE ctu_params-dismode VALUE 'N',
           g_file TYPE ibipparms-path.
    ALV field catalog
    DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
          Batchinputdata of single transaction
    DATA:   i_bdcdata LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
          messages of call transaction
    DATA:   i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
          error session opened (' ' or 'X')
    Table to hold the return messages
    DATA: BEGIN OF i_errmsg OCCURS 10.
            INCLUDE STRUCTURE bapiret2.
    DATA: END OF i_errmsg.
    ALV List header table
    DATA : i_header1 TYPE slis_t_listheader.
    ALV List header table
    DATA : i_header TYPE slis_listheader.
    ***ALV Events
    DATA: is_layout TYPE slis_layout_alv.
    DATA : it_event TYPE slis_alv_event.
    DATA : it_event1 TYPE slis_t_event.
    To get the F4 help for file
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_plan.
      PERFORM get_filename.
    START  OF SELECTION
    START-OF-SELECTION.
    Initialise data
      PERFORM initialise_events.
    Retrieve data from Excel file
      PERFORM retreive_data.
    Populate final data into an internal table
      PERFORM populate_data.
    Process the excel file data to create a record for IT0007
      PERFORM process_data.
    END  OF SELECTION
    END-OF-SELECTION.
      PERFORM final_output.
    *&      Form  GET_FILENAME
    FORM get_filename .
    *Function module used for F4 help
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
        IMPORTING
          file_name     = p_plan.
    ENDFORM.                    " GET_FILENAME
    *&      Form  INITIALISE_EVENTS
    FORM initialise_events .
      i_header-typ = 'H'.
    i_header-key = 'R'.
      i_header-info = 'BDC Interface for PA Infotypes 0000,0001,0002'.
      APPEND i_header TO i_header1.
      CLEAR i_header.
      i_header-typ = 'S'.
      i_header-info = 'Hiring, Org.Assignment, Personnel Data'.
      APPEND i_header TO i_header1.
      CLEAR i_header.
    ***Events and form name
      it_event-name = 'TOP_OF_PAGE'.
      it_event-form = 'TOP_OF_PAGE'.
      APPEND it_event TO it_event1.
    ENDFORM.                    " INITIALISE_EVENTS
    *&      Form  RETREIVE_DATA
    FORM retreive_data .
      PERFORM upload_data.
    ENDFORM.                    " RETREIVE_DATA
    *&      Form  UPLOAD_DATA
    FORM upload_data .
    FM to upload data from excel sheet to internal table
      CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        EXPORTING
          filename                = p_plan
          i_begin_col             = g_colbeg
          i_begin_row             = g_rowbeg
          i_end_col               = g_colend
          i_end_row               = g_rowend
        TABLES
          intern                  = i_tplan
        EXCEPTIONS
          inconsistent_parameters = 1
          upload_ole              = 2
          OTHERS                  = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " UPLOAD_DATA
    *&      Form  POPULATE_DATA
    FORM populate_data .
    processing the internal table generated from the function module
    Passing data from Excel file to internal table
      CLEAR: g_cnt_processed,
             g_cnt_err_processed,
             i_intern,
             i_plan.
      LOOP AT i_tplan.
        AT NEW row.
          CLEAR i_plan.
        ENDAT.
        CASE i_tplan-col.
    Begin Date
          WHEN '0001'.
            i_plan-pernr = i_tplan-value.
    End Date
          WHEN '0002'.
            i_plan-begda = i_tplan-value.
          WHEN '0003'.
            i_plan-massg = i_tplan-value.
    Sign
          WHEN '0004'.
            i_plan-plans = i_tplan-value.
          WHEN '0005'.
            i_plan-werks = i_tplan-value.
          WHEN '0006'.
            i_plan-persg = i_tplan-value.
          WHEN '0007'.
            i_plan-persk = i_tplan-value.
          WHEN '0008'.
            i_plan-anrex = i_tplan-value.
          WHEN '0009'.
            i_plan-nachn = i_tplan-value.
          WHEN '0010'.
            i_plan-vorna = i_tplan-value.
          WHEN '0011'.
            i_plan-gesch = i_tplan-value.
          WHEN '0012'.
            i_plan-gbdat = i_tplan-value.
          WHEN '0013'.
            i_plan-fatxt = i_tplan-value.
          WHEN '0014'.
            i_plan-famdt = i_tplan-value.
          WHEN '0015'.
            i_plan-gblnd = i_tplan-value.
          WHEN '0016'.
            i_plan-anzkd = i_tplan-value.
          WHEN '0017'.
            i_plan-natio = i_tplan-value.
          WHEN '0018'.
            i_plan-btrtl = i_tplan-value.
          WHEN '0019'.
            i_plan-gsber = i_tplan-value.
          WHEN '0020'.
            i_plan-abkrs = i_tplan-value.
        ENDCASE.
    Appending the internal table tb_data, tb_chng
        AT END OF row.
          APPEND i_plan.
          IF i_plan IS INITIAL.
            g_cnt_err_processed = g_cnt_err_processed + 1.
          ENDIF.
        ENDAT.
      ENDLOOP.
    To get the total number of records processed
      DESCRIBE TABLE i_plan LINES g_lines.
      g_cnt_processed = g_cnt_err_processed + g_lines.
      CLEAR g_lines.
    ENDFORM.                    " POPULATE_DATA
    *&      Form  PROCESS_DATA
    FORM process_data .
      CLEAR wa_error.
      REFRESH i_bdcdata.
    Check if the employee numbers from the template has already been hired
      SELECT pernr
             begda
             FROM pa0000
             INTO TABLE it_pa000
             FOR ALL ENTRIES IN i_plan
             WHERE pernr = i_plan-pernr
               AND massn = 'ZA'.
      IF sy-subrc = 0.
        SORT it_pa000 BY pernr.
    Check if employee has a corresponding infotype 0001 record
        SELECT pernr
               begda
               FROM pa0001
               INTO TABLE it_pa001
               FOR ALL ENTRIES IN it_pa000
               WHERE pernr = it_pa000-pernr AND
                     begda = it_pa000-begda.
        IF sy-subrc = 0.
          SORT it_pa001 BY pernr.
    Check if employee has a corresponding infotype 0002 record
          SELECT pernr
               begda
               FROM pa0001
               INTO TABLE it_pa002
               FOR ALL ENTRIES IN it_pa001
               WHERE pernr = it_pa001-pernr AND
                     begda = it_pa001-begda.
          IF sy-subrc = 0.
            SORT it_pa002 BY pernr.
          ENDIF.
        ENDIF.
      ENDIF.
      LOOP AT i_plan.
        REFRESH i_bdcdata.
    ***your recording to be pasted here***
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'P0006-BEGDA'.
        PERFORM call_transaction.
        APPEND wa_error TO i_error.
        REFRESH: i_bdcdata, i_messtab.
        CLEAR: wa_error, i_error.
      ENDLOOP.
    ENDFORM.                    " PROCESS_DATA
    *&      Form  BDC_DYNPRO
    FORM bdc_dynpro USING program dynpro.
      CLEAR i_bdcdata.
      i_bdcdata-program  = program.
      i_bdcdata-dynpro   = dynpro.
      i_bdcdata-dynbegin = 'X'.
      APPEND i_bdcdata.
    ENDFORM.                    "BDC_DYNPRO
    *&      Form  BDC_FIELD
    FORM bdc_field USING fnam fval.
    IF fval <> nodata.
      CLEAR i_bdcdata.
      i_bdcdata-fnam = fnam.
      i_bdcdata-fval = fval.
      APPEND i_bdcdata.
    ENDIF.
    ENDFORM.                    "bdc_field
    *&      Form  ERROR_RECORD_DATA
    FORM error_record_data .
      CLEAR: g_lines,
           wa_messtab,
           g_msg.
      DESCRIBE TABLE i_messtab LINES g_lines.
      READ TABLE i_messtab INTO wa_messtab INDEX g_lines.
      IF sy-subrc = 0.
        CLEAR g_msg.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = wa_messtab-msgid
            lang      = sy-langu
            no        = wa_messtab-msgnr
            v1        = wa_messtab-msgv1
            v2        = wa_messtab-msgv2
            v3        = wa_messtab-msgv3
            v4        = wa_messtab-msgv4
          IMPORTING
            msg       = g_msg
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.
       IF wa_messtab-msgtyp = 'E'.
        IF wa_messtab-msgtyp = 'S' AND wa_messtab-msgnr = '102' AND wa_messtab-msgid = 'PG'.
          wa_error-pernr = i_plan-pernr.
          wa_error-rel_obj_id = 'S'.
          wa_error-msg = 'Personnel Number Created Successfully'.
        ELSE.
          wa_error-pernr = i_plan-pernr.
          wa_error-rel_obj_id = 'E'.
          wa_error-msg = g_msg.
        ENDIF.
       APPEND wa_error TO i_error.
       CLEAR i_error.
      ENDIF.
    ENDFORM.                    " ERROR_RECORD_DATA
    *&      Form  FINAL_OUTPUT
    FORM final_output .
      CLEAR g_lines.
      SORT i_error.
    *************added*********************************************
      loop at i_error into wa_error.
        if wa_error-MSG eq 'No batch input data for screen MP000600 2000'.
          wa_error-rel_obj_id = 'S'.
          wa_error-MSG = 'Record Created Successfully'.
          modify i_error from wa_error.
        endif.
      endloop.
      loop at i_error into wa_error.
        if  wa_error-rel_obj_id = 'S'.
          g_cnt_success = g_cnt_success + 1.       " Append success count
        elseif  wa_error-rel_obj_id = 'E'.
          g_cnt_failure = g_cnt_failure + 1.       " Append error count
        endif.
      endloop.
    ***Field catalog
      PERFORM field_cat.
    ***Assigning Program name
      g_repid = sy-repid.
      SORT i_error.
    ***Display Output
    IF NOT it_final[] IS INITIAL.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                i_callback_program       = g_repid
               i_callback_user_command  = 'USER_COMMAND'
               i_callback_pf_status_set = 'PF_STATUS_SET'
                i_save                   = 'A'
                it_events                = it_event1
                is_layout                = is_layout
                it_fieldcat              = i_fieldcat[]
           TABLES
                t_outtab                 = i_error[].
    ELSE.
       MESSAGE i015(zv_msg) WITH 'No Data Found for this selection'.
       LEAVE LIST-PROCESSING.
    ENDIF.
    ENDFORM.                    " FINAL_OUTPUT
    *&      Form  top_of_page
          text
    FORM top_of_page.
    ***FM for Displaying Heading
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = i_header1[]
          i_logo             = 'ENJOYSAP_LOGO'.
    ENDFORM.                    "top_of_page
    *&      Form  FIELD_CAT
    FORM field_cat .
    ENDFORM.                    " FIELD_CAT
    *&      Form  CALL_TRANSACTION
    FORM call_transaction .
      CALL TRANSACTION 'PA40' USING i_bdcdata
                                   MODE g_mode
                                   UPDATE 'S'
                                   MESSAGES INTO i_messtab.
    If call transaction successful
      IF sy-subrc = 0.
       g_cnt_success = g_cnt_success + 1.       " Append success count  "changed
        PERFORM error_record_data.  " Populate all data
    If call transaction not successful
      ELSE.
        PERFORM error_record_data. " Populate all table
       g_cnt_failure = g_cnt_failure + 1.       " Append error count  "changed
      ENDIF.
    ENDFORM.                    " CALL_TRANSACTION

  • How to call a stored procedure on time basis with out using sql job and GOTO

    Hi,
       I wanted to call a stored proc, on time basis ,
    please tel me how it can be done with out using sql job , goto .
    1) That is, is there any timer aviable in sqlserver.
    q2) And which one is better GOTO or sql job.
    yours sincerley

    Raj, Check if my explanation helps you:
    Your job runs every 10 seconds.
    Lets say first time you are scheduling and running your job at 12:00:00 PM
    Now your proc will start executing.
    Say it got finished at 12:00:07.
    Now the next schedule time is 12:00:10 PM.
    The moment this time hits, the job will get invoked and start executing the proc.
    Lets say this time it finished at 12:00:22 PM (It took 2 extra seconds)
    This time the scheduled time is already gone (12:00:20 PM), thus it'll now run at the next schedule that is 12:00:30 PM.
    Thus if anytime your job takes more than 10 seconds to run, it'll just miss those particular schedules overlapping with execution time. Otherwise you are good to go. 
    PS: A job is the best way to handle this, in your problem statement you don't need a job but that would be wrong. You have another way to do that, if you keep running your procedure all the time and the moment your timestamp hits a multiple of 10
    seconds you can run your logic and then returning to the timer. But this is extremely wrong for a system. Even if your requirement is extremely transactional and complex, I would not suggest this. If the job is taking more than 10seconds (which it might if
    your logics inside are complex), you should optimize your code and table architecture.
    Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
    The climb is all there is.

  • I want to print form directly with out using spool request

    hi,
            i want to print form directly with out using output type screen (spool request or print preview ) , i want to supress the screen and get output directly to the printer. plz help me
    thanks&regards
    praveen

    Hi Praveen,
    In your program, where you are calling the OPEN_FORM function.. pass the name of the printer in the 'DEVICE' parameter of the function module..
    Also, there is a parameter OPTIONS of sturcture ITCPO in the same function module.. in this parameter you will find lot of options to set properties for the printing..
    There will be one field for immediate printing, set that field to 'X' and other settings for print in the same structure and pass to the function module..
    Thanks and Best Regards,
    Vikas Bittera.

  • How do I view ipod music files with out using I tunes?

    I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
    How do I view ipod music files with out using I tunes?

    they should be under ur my music folder if u have windows

  • Is it possible to transfer music between iPhones and iPods with out using iTunes

    Is it possible to transfer music between iPhones and iPods with out using iTunes

    Nope.  Both require iTunes on a computer to sync music from.
    Unless the iPod is an iPod Touch and the music was bought from iTunes.  In which case the Touch can simply go to the iTunes App, under Purchased  and download the purchased songs for free.

  • Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

    can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?  in apple tv 3 and 2?
    That  i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive,  i dont want to see then  whit the streaming and icloud, or used my  laptop o pc for access de movies and stuff.
    i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
    if i can´t  connect a external hard  drive, wich others media players divices you know that can see itunes movies?
    ¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
    lo que no quiero es usar  la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
    y de no poderse conectar  que otros dispositivos media pleyer conoces para ver peliculas de itunes  en la tv?

    Welcome to the Apple Community.
    can i connect a external hard drive to apple tv 3 generation
    Unfortunately not.

  • How can i get new apple id with out using credit card or visa card

    how can i get a new apple id with out using credit card or visa card?

    Hi xianlycier06,
    If you are looking to create an Apple ID without using a credit card, you may find the following article helpful:
    Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    http://support.apple.com/kb/HT2534
    Regards,
    - Brenden

  • I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
    -Kevin P.
    Message Edited by Kevin Price on 12-01-2006 02:42 PM
    Attachments:
    Binning example.vi ‏51 KB
    Binning example.png ‏12 KB

Maybe you are looking for