Configuring a Communication Channel for an AE other than the default IS

Configuring a Communication Channel for an Adapter Engine other than the default engine.
See:  help.sap.com for Communication Channel http://help.sap.com/saphelp_nw04/helpdata/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm
It states under 'Adapter Configuration', that you can specify the Adapter Engine you want to use in the Adapter Engine dropdown box.
I have activated the XI components on my ERP system using transaction SICF, but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
Maybe some background would be helpful:  This is for a scenario that will send a file from an external system to one of the ERP systems in our landscape.  BUT, the system admins have decided to revoke our FTP accounts (because they have their reasons), so I need to create a File Adapter that will drop the file on the file system of that ERP system, due to visibility I want to use the integrated Adapter Engine that comes with the ERP system, but need to know how/what I'm missing in setting up this scenario.

Hi Anesh,
>>>>but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
in order to use some other adapter engine you
have to install it first by dafault only one
(central) adapter engine is used and it is all
most clients need
if you'd like to use some other adapter engine
(decentralized for example) have a look at thid guide:
<b>Configuring a Local Adapter Engine to Work with a Central Instance</b>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

Similar Messages

  • Possible to configure several communication channels for the same receiver?

    Hi,
    is it possible to configure several communication channels for one (the same) receiver?
    The problem is as follows: I would like to switch between the RFC-channel and the XI-channel, if the RFC-Adapter doesn't work for some reason.
    The situation: Our XI3.0 posts messages to several receivers and the switch should be done by changing one table entry which is selected and analysed in an ABAP-Proxy and which could enrich the XML-message. By now, the only chance I see is to change the respective entries in the Integration Directory for each receiver separately.
    Thanks for your help, Peter.

    Hi,
    >>>>But to be honest: Is it elegant to double the receivers?
    of course not:)
    but this is the only way I believe
    (cause you cannot assign conditions to receiver agreements)
    you could also create two messages (practically two flows)
    but would it be more elegant?
    BTW
    in my opinion you should try restarting RFC channel
    and not create two - just in case...
    if RFC doesn't always work why don't you use another one only?
    this would just simplify your scenario (maintanance of just a number of communication channels and not 2 x number of communication channels)
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • How to enable remote debugging for a session other than the current one

    Hi all,
    I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
    More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
    The docs indicate that I should be able to do so:
    dbms_debug_jdwp.connect_tcp(
    host IN VARCHAR2,
    port IN VARCHAR2,
    session_id IN PLS_INTEGER := NULL,
    session_serial IN PLS_INTEGER := NULL,
    debug_role IN VARCHAR2 := NULL,
    debug_role_pwd IN VARCHAR2 := NULL,
    option_flags IN PLS_INTEGER := 0,
    extensions_cmd_set IN PLS_INTEGER := 128);
    But when I try (even as sys), I get the following:
    exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
    ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
    ORA-06512: at line 1
    00022. 00000 - "invalid session ID; access denied"
    *Cause:    Either the session specified does not exist or the caller
    does not have the privilege to access it.
    *Action:   Specify a valid session ID that you have privilege to access,
    that is either you own it or you have the CHANGE_USER privilege.
    I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
    Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

    Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
    I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
    Regards,
    K.

  • How do i get siri to set a reminder for a time other than the appt time. For example:  I want Siri to remind me at 10:00 pm on Monday that I have a dentist appt. at 9:00 am on Tuesday. She screws up the dates and times no matter what I say

    What I can't figure out is how to set a reminder for a time other than the appt time. For example:  I want Siri to remind me at 10:00 pm on Monday that I have a dentist appt. at 9:00 am on Tuesday. She screws up the dates and times no matter what I say

    "Remind me at 10:00 pm on Monday".  Siri: "Ok, just tell me what you want to be reminded about".  "I have a dentist appointment on 9:00 am on Tuesday".  Siri should set it up correctly.

  • Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error, so you can load Firefox again.

    Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error. I have Windows XP (Media Center Edition) and all updates (Firefox, Adobe PDF, Microsoft, virus protection, etc) are installed. This has only been a problem since Firefox 4, and isn't a problem in Internet Explorer.

    Hi David,
    Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
    Do you have any stored preferences for PDF files in Firefox?
    *[[Applications panel - Set how Firefox handles different types of files]]

  • Deploying Crystal Reports 2008 on a website other than the default website

    Hi,
    We have an ASP.NET 2003 web application using CR 2008 as reporting tool.
    To deploy the application, we are using the CR 2008 mergemodules.
    If the application is installed into the default website, this works fine, but if another website is selected, the mergemodule still installs CR 2008 to the default website.
    To overcome this problem, the crystalreportviewers12 virtual directory has to be created in the selected website.
    But if the application is installed directly into the website, and not into a virtual directory of the website, problems occur, like images not showing up.
    I would like to know if there exists documentation regarding deployment into websites, other than the default website and what configurations have to be done to make it work.
    Best regards,
    Ângelo Vilela

    See the following articles;
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0437ea8-97d2-2b10-2795-c202a76a5e80
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a
    Also, the developer help files contain more info:
    https://boc.sdn.sap.com/developer/library
    Ludek
    Follow us on Twitter
    http://twitter.com/SAPCRNetSup

  • Keychain services API and dealing with Keychains other than the default

    Hello,
    So I've been doing some C work with the Keychain services API. But I can't figure out how to set the Keychain for a function to something other than the default, which is set by passing NULL.
    For example,
    status = SecKeychainAddGenericPassword (
    *NULL, // default keychain*
    10, // length of service name
    "SurfWriter", // service name
    10, // length of account name
    "MyUserAcct", // account name
    passwordLength, // length of password
    password, // pointer to password data
    NULL // the item reference
    This function is defined here:
    http://developer.apple.com/documentation/Security/Reference/keychainservices/Ref erence/reference.html#//apple_ref/c/func/SecKeychainAddGenericPassword
    and the data type for the Keychain is here:
    http://developer.apple.com/documentation/Security/Reference/keychainservices/Ref erence/reference.html#//appleref/doc/cref/SecKeychainRef
    But neither helps me at all for being able to edit a keychain that isn't the default Keychain.
    I appreciate any help, thanks.
    Message was edited by: Smerky

    http://developer.apple.com/documentation/Security/Reference/keychainservices/Ref erence/reference.html#//apple_ref/c/func/SecKeychainOpen

  • When I create a stickie note, I can not save any font size other than the default.  How do I save a stickie with a larger or different font?

    How do I save a stickie note with a different font size other than the default?  When I create a note and save it using a larger font, it reopens with the default.

    Unlikely, I'm afraid.
    The LMS has no control over the playbar that pauses or plays the Captivate content.
    In a Multi SCORM package, the LMS also may be showing a TOC in the SCORM player with links to launch the lesson modules.  This TOC is in addition to the TOC inside the Captivate project file which gives access to sections of the module by jumping to slides that begin those sections.  But the LMS doesn't usually give you any control over the look and feel or functionality of that TOC either. 
    If your client is adamant that they want complete control over these areas, then your best option may be NOT to build this course with Captivate but build it from the ground up with another tool.  E.g. Flash, or Dreamweaver.  Either way, that will add a lot more time and expense to the project.  But if the client has the budget and is unwilling to budge on their requirement, then that's what I would be telling them to do.

  • [svn:bz-trunk] 17772: Update the url in the tests to use a relative path instead of the default localhost : 8400 so that the tests can pass on appservers other than the default Tomcat .

    Revision: 17772
    Revision: 17772
    Author:   [email protected]
    Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
    Log Message:
    Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

    Revision: 17772
    Revision: 17772
    Author:   [email protected]
    Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
    Log Message:
    Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

  • Can I use a different charger for my iPhone other than the one that was supplied for it

    Can I use a different wall charger for my iPhone 4S other than the one that was supplied with it

    wjosten wrote:
    Lawrence Finch wrote:
    Apple puts no special requirements on it other than that it meet the USB spec.
    Except for the connector...
    What is special about the connector for the 4s charger cable? Mine is a normal USB connector. The question was about the wall charger, not the connector to the phone.

  • CF Admin login fails (invalid pw) for Windows User other than the one used to install CF 10

    I installed CF 10 on a server running Windows Server 2008 R2 Standard having logged into the server as a Windows user in the administrator group.  I set up CF 10 Administrator to use a single password (the default).  I can log into CF Admin when authenticating to the server with the same Windows credentials used when installing CF 10 but if I log into the server as another Windows user in the administrator group I cannot log into CF Admin; I get an Invalid Password error.  I thought the whole point of the single password was so that anyone who can log into the server could log into CF Admin.  It works like that for my CF 8 and CF 9 machines.

    It is a new design, based on security issues that arose in previous ColdFusion versions. See, for example, Charlie Arehart's blog for more details.

  • Possible to use an icon other than the default when building a distribution executable for a third party customer ?

    I build stand-alone exe's for customers, and would like to know if in the "Build Distribution Kit" dialog there is an option for using a non-standard icon? If not, what else will work...? Thanks.

    1. Using windows "START" button,
    START->Programs->National Instruments CVI
    ->Utility Programs->Icon Editor.
    2. Double click the icon editor.
    Create your ICON.
    3. Save your icon by,"FILE" "SAVE AS"
    xxxxxx.ico. I suggest you save the
    icon in your program folder.
    4. Now build a stand alone executable.
    CVI will ask for "name" and "path"
    of the icon.
    5. By dragging the .exe to your desktop
    your icon will follow.
    6. When you create a distribution kit the
    icon will be placed into the kit.
    7. After the customer installs the kit
    the icon will show up in a small window
    they can drag the icon to the disk top
    or drag the .exe to the disk top at a
    later time.
    James Holmes
    Trak Microwave Tampa Fl.
    (813)884-1411 ext. 247
    jhol
    [email protected]

  • Is it possible to specify a template other than the default for the Event Details Layout?

    Just exactly what it sounds like, and probably a n00b question –– but any help appreciated. Basically, it looks as though the Detail Layout for an event clicked on through calendar display automatically pulls the default template; I'd like to use a different one there.
    Thanks,
    T.E.D.

    Hi,
    Click the "More options" bit on the event - See the Template selection dropdown? There.

  • How can I create a new skin (other than the default skins) for my Captivate Project?

    Hi everyone,
    I am working on a project where my client wants me to create a player skin which is completely different from the default themes that captivate has already. The design which client has shared with me contains in this way:
    1. TOC - should be truncated and can be expanded by pressing "+" button against the Navigation Text. Its like opening and closing the menu bar using + and - buttons
    2. Playback controls required by him are also not in the default skins.
    I dont know, if there is any way to customize the skins to this level inside captivate.
    Please help me out.
    Thanks & Regards
    Vikas Sharma

    Unlikely, I'm afraid.
    The LMS has no control over the playbar that pauses or plays the Captivate content.
    In a Multi SCORM package, the LMS also may be showing a TOC in the SCORM player with links to launch the lesson modules.  This TOC is in addition to the TOC inside the Captivate project file which gives access to sections of the module by jumping to slides that begin those sections.  But the LMS doesn't usually give you any control over the look and feel or functionality of that TOC either. 
    If your client is adamant that they want complete control over these areas, then your best option may be NOT to build this course with Captivate but build it from the ground up with another tool.  E.g. Flash, or Dreamweaver.  Either way, that will add a lot more time and expense to the project.  But if the client has the budget and is unwilling to budge on their requirement, then that's what I would be telling them to do.

  • When saving downloads is there a way to instruct Firefox to save the download to a different folder other than the default?

    I downloaded a printer driver to Firefox's default downloads. I started the exe file and a window opened so I could install the driver. I selected run, and the window closed and nothing happened. I finally had to use MS IE in order to save the file to a different folder. I was then able to decompress the file and install it. Is there an option in Firefox to override the default downloads folder with a folder of my choosing? Running Win 7 Home Prem 64 bit, FF 5.0.1.

    This is the same issue that has plagued me for years. I always thought that this was a Flash plugin issue, but it does occur on HTML5 as well. A friend of mine verified that this does not occur in Linux, but only on Windows. It would be great to have this fixed, as it's honestly the only thing that's making me use Chrome all the time, as I don't want to have multiple browsers open.

Maybe you are looking for

  • Selecting more than one object at a time

    Hi guys and girls I am trying to select more than one object on my artboard and Shift+clicking on the next one isn't working... I am creating an interactive form in Indesign and realised that I have everything on one layer... I have radio buttons for

  • Child to Parent Node Creation, Mapping Help required

    Hi Guys, I need some suggestions on the following mapping problem, kindly suggest some solution if possible: I have a sender structure as: ParentNode ..........RecordSet  (0 to 1) ................ SValue1  (0 to 1) ................ SValue2  (0 to 1)

  • Can I take off the keyboard from a Macbook air?

    I would like to use my macbook air as just a screen and use an external keyboard and trackpad. I want to use the Macbook in 90 degree view and it is uncomfortable to use it like that when the keyboard is right there. Is there a way that I can remove

  • Bug - Report Region In Wrong Position

    Apex 4.2 I have a page with a parent region and 3 child regions I want region 1 and 2 next to each other and region 3 below. So I made the settings as below. region 1 sequence 10 template: html region start new grid: no start new row: no region 2 seq

  • Odd cPU detection and a bios issue

    hey guys got somemore info about my super odd cpu updated mobo biod to latest 5.5 cpu detected as athlon xp 3000 as it "should" do cpu-z detected as athlon xp 300 = multi 13 x 166 now all of a sudden its not detecting it properly i'm back to using th