Configuring a Oracle 9i database for OWB

Hello everybody ...
I'm working in an envirenment with :
Oracle 9i database
Oracle 9i Developer suite release2 (9.0.2)
in the documentation of this last one, I've seen that the init.ora must be configured to support the OWB
this file is in the [Drive:]\Oracle\admin\owbrepos\pfile\
but I can't find it...
Can anyone help me ?

This statement in the documentation assumes that 'owbrepos' is the name of your database. Substitute 'owbrepos' with the actual name of your database.
I recommend you download and install a current release of OWB from here http://otn.oracle.com/software/products/warehouse/index.html. The 9.0.2 release is two and a half years old and the support for it ends in less than a month (09-JUN-2004).
Nikolai Rochnik

Similar Messages

Oracle 11G database for 64 bit windows installation error

Hi,
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.

Adipur wrote:
Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
Re: Oracle 11G database for 64 bit windows installation error
Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
Edited by: EdStevens on May 15, 2013 7:03 AM

Oracle 9i Database for Linux

Hello,
I need to be able to test some software changes against an Oracle 9i database running under Linux as this is an environment used by one of my customers.
I have tried downloading the zip files found at http://www.oracle.com/technology/software/products/oracle9i/htdocs/linuxsoft.html but if I try to open or download any of these files I receive an Error 404 Page Cannot Be Loaded.
This happens when using IE6 or when using GetRight.
Are the links to these files still valid? If not, where can I download Oracle 9i Database for Linux?

I don't find any problems with these files and they are still available.

Cannot download Oracle 9i database for NT/2K/XP - 92010NT_Disk2.zip

I could not download sucessfully file 92010NT_Disk2.zip from Oracle 9i database for NT/2000/XP. But I could download the first file (92010NT_Disk1.zip) very well. what can I do now?
Best regards

Make sure to delete the previous file before trying again. Also, there is download management software available that can help - see our FAQ at: http://otn.oracle.com/contact/htdocs/faqs#software
Regards,
OTN

Configuring RMAN in oracle 10g database for solaris OS

hi
send me the step by step configuration of RMAN in oracle10g for solaris OS
BR
Durga

Check the following:
Backup and Recovery Quick Start Guide
Backup and Recovery Basics
Backup and Recovery Advanced Users Guide

Pfile parameter configuration in oracle 8i according for new server

Hi Expert,
please help me about my question
my configuration is
OS win2003 32 bit
ram 3gb
database size=80gb
oracle 8i
db_block_buffers=122880
shared_pool_size=419430400
large_pool_size =24576000
log_buffer=104857600
db_block_size=8192
sort_area_size=5242880
sort_area_retained_size=5242880
**now i have server with following configuration**
ram 64 GB
database size 80 GB
processor 2.13 ghz with 8 CPU
how to configure following parameter
db_block_buffers=?
shared_pool_size=?
large_pool_size =?
log_buffer=?
db_block_size=?
sort_area_size=?
sort_area_retained_size=?

Hi,
how to configure following parameter
db_block_buffers=?
shared_pool_size=?
large_pool_size =?
log_buffer=?
db_block_size=?
sort_area_size=?
sort_area_retained_size=?
You can follow my below action plan
1) Why you want to go to new server?
Is the DB was slow? --> if yes then you need to run your application with new server
2) if its 9i or 10g and then run the advisory and check for estimated physical read for db_cache_size
3) Is it shared_Pool then you need to check shared_pool advisory section and similarly for large_pool_size etc..
according to me you can decide the size of memory structure only after running your application with database.
After migration, please collect the system stats
Kind Regards,
Rakesh Jayappa

How to configure the Oracle XSL Mapper for schemaLocation attribute?

In the Transformation_1.xsl I need to have the schemaLocation attribute defined as such:
<inc:CaseIncidentReport xsi:schemaLocation="http://caseincidentreport.com/1.0.4 CaseIncidentReport.xsd">
This is fine as long as long as I dont switch to the Design tab. When I switch to the Design tab, Oracle XSL Mapper regenerates the XSL file and renders the root element as
<inc:CaseIncidentReport>
Can some one tell me how to configure Oracle XSL Mapper for schemaLocation attribute? I am using BPEL Designer/JDeveloper Version 10.1.2.1.0 (Build 1915)
Thanks,

What do you mean by normal import? Where can I include the 'schemaLocation' attribute in the Designer? I have no trouble adding the shemaLocation in the source tab but when I switch to the design tab it always stripe it off.
How do I file an enhancement request? I see the the XSL Mapper needs improvements.
Thanks,
Nathan

To make BI Beans work with Oracle 9i Database for Windows...

I have tried the following combination
Oracle Database 9.0.1.2 + Patch 3(Patchset:2227410)
Jdevelper9i RC
BI Beans RC
But, when I tried to create a new calculation or new presentation, I got "Connection information is incomplete, Service Name is not specified." error. So, I added " <oracle.dss.addins.wizard.connection.serviceName>OLAPServer</oracle.dss.addins.wizard.connection.serviceName>" in IDEConnections.xml. After this, it ended up with the "BIB-16601" error again:(
Please let me know whether I have to wait for another patch or not. Because, if the cause of this error is my configuration and all the Oracle Products are fine, I have to check my configuration again to make it work. But, if I simply have to wait for a new patch, I can do something else till then:)
Thank you.
Seiji
P.S. If someone could make BI Beans work with Jdeveloper9irc and Oracle OLAP Services on Windows, PLEASE let me know.

I found an answer for my question in the JDeveloper 9i forum ( The title is "OLAP Patch"). I will wait for the new patch.

RMAN configuration in ORACLE RAC database

Hi there,
We are using RMAN backup strategy for taking backups from one node(eg.node1).Database is RAC database, version 9.2.3. and OS is Solaris 5.10.
this is the configuration which we use, as follows:
Connecting to Prod.Database using catalog database.
rman catalog=rman/rman@CATDB target=sys/oracle@PRODDB(node 2).
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 30;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rmanback/_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 5;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/rmanback/CMWPROD_%s.bak';
CONFIGURE CHANNEL 2 DEVICE TYPE DISK CONNECT 'SYS/oracle@PRODDB(node2)';
CONFIGURE MAXSETSIZE TO 7 G;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/9.2.3/dbs/snapcf_CMWPROD1.f';
As the above config shows RMAN is connecting to PROD DB (node 2). But we need to take backups (datafiles and as well as archive logs) from two nodes (i.e from node 1 and as well as node 2).
Is there any possibility for taking backups from two nodes?
Thanks,
Balu.

You will need to setup an NFS share such that both nodes can access each other's archived redo logs area. You also need to ensure your LOG_ARCHIVE_DEST_n parameter settings are properly set. Once setup correctly, either node will be able to run the backup and include each other's archived redo log files. Since this is RAC, the data files are shared by design and either node can already backup these files.
Multiple channels would allow 'simultaneous' backup of the archived redo logs.
I would highly recommend using a CFS (single shared file system where all nodes store their archived redo logs distinguished by thread) to store the archived redo logs, this reduces administration and configuration especially when you get ready to scale.
Hope this helps.

Oracle 9i Database for Window download

The download button at top right does not work. Gives me junk.
I tried by going to Oracle Technology Network > Software > Oracle9i Database
then click on download for windows. That too do not work. Gives me junk. Oracle support guys please help me!!!

Could you please check that you have Javascript and cookies enabled in your browser and try again by going to http://otn.oracle.com/software/ If you are still having problems, please reply with the operating system and version, and browser type and version that you are running.
- OTN

Downloading oracle 9i database for windows xp

I am working on winXP-32 bit. I have downloaded for winxp-64bit.
When I tried to run setup file it is saying it is not a valid 32 bit application.
If I have to download for winxp-32 bit , there are 3 zip files. Actually I want only the standard edition. Cant I download only standard edition? Should I download all 3 zip files for standard edition? Please help me out.

You need to download all 3 zip files, since the installer decides which files have to installed from the three installation "disk" files, if you're refering to this link:
http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html
There's also a step by step installation guide right below which explains what has to be done.
C.

Querying Oracle BPM database for processes with a process variable criterio

Dear gurua,
what data base user (maybe DEV_SOAINFRA???) and which tables should I join so that I select all processes with have a process variable with a specific value?

I found the following web site that can help. The password for everything is welcome1
http://blogs.oracle.com/bpm/2010/06/bpm_11gr1_now_available_on_ama.html

How to download Oracle 10g database (for Windows XP)

Please give me the Oracle 10g download link. So that I can download and install oracle 10g on Windows platform(windows XP)

user10888692 wrote:
Please give me the Oracle 10g download link. So that I can download and install oracle 10g on Windows platform(windows XP)Oracle Database 10g Release 2 -- Standard Edition, Standard Edition One, and Enterprise Edition
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Oracle e-Delivery
http://edelivery.oracle.com/
http://tinyurl.com/4j7y86v -- And, click on the first link!
Thanks,
Hussein

Oracle as database for ERP2005 and ERP2004

Hi,
I am on a Solaris 10, Oracle 10.2 environment. I have already installed Solution Manager 4.0 on a NW2004s platform. Now I would like to install ERP2004 (NW04)on the same server, using the same Oracle database. Is this possible?? We are thinking about splitting Solaris into 3 zones, so that each zone acts (almost) like a separate server.
Please help, this is an urgent issue...
Regards,
Thomas

you can use the option mcod (multiple components in one database) when asked during installation of the database instance...the databases will the be distiguished using the appropriate database schema. ie. sapdev and sapqas (examples!)
GreetZ, AH

Md5sum for Oracle 9i database for linux files

Hello!
Can anyone provide the md5sum for the following files?
Linux9i_Disk1.cpio.gz
Linux9i_Disk2.cpio.gz
Linux9i_Disk3.cpio.gz
Thanks,
Anders Hermansen

user464965 wrote:
OK ... Using DB version 10.1.0.5 :
select XMLType.getStringVal(t.xml_data) my_data from mySchema.myTable t where t.myKey = '1'
my_data
==================
<WAREHOUSE whNo="101">
<BUILDING>Brick</BUILDING>
</WAREHOUSE>
update mySchema.myTable t set t.xml_data = XMLType.appendChildXml(t.xml_data, '/Warehouse', XMLType('<COLOR>red</COLOR>')) where t.myKey = '1'
ORA-19039: Keyword APPENDCHILDXML reserved for future use
ORA-06512: at "SYS.XMLTYPE", line 230
ORA-06512: at line 1It's quite useful, Thanks for your effort!

Configuring a Oracle 9i database for OWB

Similar Messages

Maybe you are looking for