Configuring a proxy server with username and passw...

Dear All,
There is one thing which I have found in all the Nokia phones I have had until now which I find very disappointing:
A proxy server can be set BUT a username and password for it cannot.
In the case of trying to connect to the Internet outside a corporate network normally a proxy connection with username and password has to be entered.
I can enter the proxy server on my Nokia phone but there is no place to enter a username and password in order to authenticate in front of the proxy server.
Does Nokia think about adding this functionality, which, if I may say, has been in Windows Mobile since quite some time.
If not for all phones, at least for the E series which are intended to be used in secure business networks.
In the current situation I can use the corporate Wi-Fi to check my Exchange email which is great, but when I need to access something outside the corporate network I have to use the 3G network.
So two question arise from the above:
1. Will Nokia at some point implement Proxy Server Authentication? (Or maybe I'm not able to find it)
2. Is there any application which allows Proxy Server Authentication to be used when connecting to the Internet?
Thank you in advance for your help!
Mitko
Nokia 650, Nokia 3510i, Nokia 3650, Nokia 6680, Nokia N73, Nokia E51, Nokia 5800 XM, HTC Desire, HTC Trophy, Nokia Lumia 820

Hi,
You can do:
username:password@proxyservername
Andy

Similar Messages

Configure a Cisco router with Username and Password.

Hello Guys,
Am quite new in cisco and i need to configure an 891 cisco router,can someone please show me step by step configuration commands for configuring Username and Secret Password.I would like the router to ask for "Username"and " Password" anytime i want to login the router through telnet.I also want to know if i have to erase the default configurations on the router first, before i start the configuration,and how it should be done in other not to loose the router whiles working on it.Thanks for your usual quick responds.
Regards,
Eben.

Hello Eben,
Peter has suggested to use SSH because of the fact that telnet data is sent in clear text, so someone with the right tools could easily find your password and your device could/would be compromised. It is security best practice. SSH is encrypted.
Technically speaking you do not need to change the hostname / domain name. But majority of Cisco documentation follow this method.
In case you are interested on how to do this without change... see below.
Router(config)#
Router(config)#crypto key generate rsa modulus 1024
% Please define a hostname other than Router.
Router(config)#crypto key generate rsa modulus 1024 label CISCO
The name for the keys will be: CISCO
% The key modulus size is 1024 bits
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]
Router(config)#
*Jul 11 13:27:51.431: %SSH-5-ENABLED: SSH 1.99 has been enabled
Router(config)#
The normal cases just as shown in Cisco documentation, the parser (without a label on the crypto key) would force us to change the hostname, create a domain name. I think the domain name is there to put a label on the keys.
Router(config)#crypto key generate rsa general-keys modulus 1024
% Please define a hostname other than Router.
Router(config)#crypto key generate rsa
% Please define a hostname other than Router.
Router(config)#hos
Router(config)#hostname ISR
lexnetISR(config)#crypto key generate rsa general-keys modulus 1024
% Please define a domain-name first.
ISR(config)#ip domain name net.com
ISR(config)#exit
ISR(config)#crypto key generate rsa general-keys modulus 1024
The name for the keys will be: ISR.net.com
% The key modulus size is 1024 bits
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]

Copying files from local computer to a remote server which is not in Domain and with username and password?

"I have one workstation with static IP, Wants to create batch file to log in to this,using user name and password, copy back up files from that workstation to my desktop with batch file, please help
I am currently using batch file for back up for domain servers with robocopy commands in batch file but one of the workstation is not in domain and has static ip , also it has username and password,
Wants to create batch file on my desktop to log in this server---with username and password,, copy files from particular folder and paste it on my desktop in particular folder or auto create that folder,
please help, "
P Dave

JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
Bill - he still sees that "connection" although it isn't mapped it is attached temporarily.
P - Log off and log back on and the attached connection will be gone. It is temporary. Again - knowing the basics of WIndows would let you know this.
We have given you all of the answers that are possible. There is no other way unless you have installed things like PowerShell and PowerShell remoting or an FTP server.
If you do use a drive it can be just as easily deleted after you have finished the copy.
Again: "NET USE /?" will tell you all of the options.
Saying you know nothing is not an excuse for not thinking or looking more deeply into the suggestions made by those trying to help you. This is not a MIcrosoft support forum or help desk. It is a forum for admiinistrative scripting and assumes
that those coming here are technically trained or experienced in the basics of Windows technology.
¯\_(ツ)_/¯

How to Configure a mail server with OIM

Experts ,
Any idea/links/Docs on how to configure a mail server with OIM and to send mail notification to someone .
Pardon me, if my questions seems to be incomplete .
Thanks
Suren

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

How to configure a proxy server for Windows Azure Tools in Visual Studio 2013

Hi Visual Studio/Azure Tools team
I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server.
So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
tools.
Regards
tschaena

As we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
a) proxy server
b) proxy port
c) proxy user
d) proxy users-password
e) proxy.auth.Preference="BASIC"
And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
a) how to setup that on a per tools basis
b) OR who inherits this information from whom i.e. use the same as IE does, what if we use FireFox or any other browsers?
I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
or has it just somewhere, but not in the vicinity of the demanding user.
Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
environment value. But at least, it works.
Sepp

Setup the proxy client with username/passwd

Hi all,
I need to configure the proxy client on my arch (without X), but with username and password. How can i do this?

Hi all,
I need to configure the proxy client on my arch (without X), but with username and password. How can i do this?

Using url with username and password in URL class

Hi,
I'm writting an applet in which I use getAppletContext().showDocument with an URL.
The problem is that I'm using URLs with username and password (http://user:[email protected]/page) and it isn't working because the browser is getting the URL http://user/page.
Is this a bug in the URL class? Or in the showDocument method?
Is there any way to make this work?
Thanks for any help,
Pedro Prospero Luis ([email protected])

I'm not sure whether this is supported behaviour. I've had this syntax fail to work in the Netscape address bar so I can't recommend it as an approach for authentication.
If you want to authenticate the user before redirecting to the page, though, you could try creating a connection to another page on the same server and sending the authorization information then. Your browser may then be successfully authenticated.
See http://www.javaworld.com/javatips/jw-javatip47.html for information on this.
You might not need to read back the page from the server, just connect to it. Might work.

One server with DAM and more CQ instances

Hi all,
do you know if is possible to have one server with DAM and 3 server (Author/Publish) with CQ5 (CRX)? Is possible connect these three servers to one DAM? We have CQ5.5... Thank you for information.

First, I assume you are calling it a "server" but you really mean two separate servers for each of 1 - 4 (one author instance, and one publish instance). Is that correct?
For #3, you called it a "testing" server. What are you testing? Code? If so, you'll want to have a testing instance that matches each instance you have. Your "website" instances should have a testing server that matches the production environment. The "intranet" and "other apps" ones should as well. You wouldn't want to test all of those things on one instance, then separate them out in production. A production environment that does not match the testing environment is a recipe for disaster. I also wouldn't try to "migrate" content (DAM assets included) like you do code. Preload test environments with test content that closely mirror production, but you don't necessarilly need to be exact. This is especially true of heavy DAM assets. Just load a subset of videos/images/etc. on testing environments. It's not necessary to sync this with production.
Since #1 and #4 are both in the DMZ, I would use the same instance for both of these scenarios. Do you have a compelling reason to completely separate them? If you combine them, they share a DAM and the problem is solved.
For #2, how are you planning to integrate a non-DMZ instance with the others in the DMZ? This strikes me as a problem.

Sign in with username and password every time I want to check emails on my PC using iCloud?

Signing in with username and password every time I want to check emails on my PC using iCloud
Having convinced my parents to get rid of their old AOL account and sign up for iCloud to sync their new iPhone with their old PC running Windows 7, I thought I was on to a winner. All working OK but is there any other way to get into emails besides going on iCloud website and signing in with name and password everytime? Can it be set up as a Mail account directly like on a Mac? Or using Outlook or Entourage? Help! I'm not a PC person!!
ELF

If they have Win 7 or 8, and Outlook 2007 or newer then you can.
Just download the iCloud Control Panel for Windows. Install and select the services you want (Mail Contacts and Calendars will appear in Outlook)

Firefox with proxy configured keeps on asking for username and password

This was asked a while ago, but no solution every posted.
I use FF at work with a proxy. When I upgraded to FF28, an "old" problem came back - FF constantly pops up a window saying the Proxy is asking for a username and password. I did nit have this problem with the previous version of FF. It doesn't seem to remember the password, and will ask several times for the same page. Has gotten so disruptive I've moved over to Chrome for now.
Thoughts on why this issue started again with FF28? Thoughts on how I can get it to stop and make the browser usable again?

See:
* https://support.mozilla.org/kb/Firefox+asks+for+user+name+and+password+on+internal+sites
* https://developer.mozilla.org/En/Integrated_Authentication
* https://addons.mozilla.org/firefox/addon/integrated-auth-for-firefox/

I upgraded to 8.0 and browser says its configured for proxy server and will not load pages. I dont run through a proxy

I have had firefox since this computer was new and never had an issue. when I was prompted to update to 8.0 I thought nothing of it... but since it updated I get the error screen with: '''The proxy server is refusing connections'''
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

Configuring Basic Authentication with Username and password on BizTalk Schema Service

Hi,
I have published my schema as a webservice with WCF-BASICHTTP adapter in IIS 8.0.
I wanted to have a Basic Authentication(User name and password restriction).
I made the Receive location with Security mode as Transport and Transport Client Crediential Type as Basic.
I also set the Service in IIS with Basic Authentication only enabled.
But I don't know how to provide a UserName and Password Authentication.
Please provide your suggestions
Regards, Vignesh S

Hi,
Try & go through the below MSDN link as it explains configuring WCF BasicHttp adapter very well.
http://msdn.microsoft.com/en-us/library/bb246064(v=bts.80).aspx
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

I am having trouble with the updates to firefox. Each time I start it I get a page that says proxy server refusing connections and have to reinstall the old version just to use the internet. That also removes the personas from my browser.

I currently have version 3.0.10 and have gotten two prompts to upgrade my version of firefox and each time I do install the new version and then try to start up Firefox, I get a page instead that says proxy server is refusing connections and the only way to browse is to re-install the old version. I also have to re-install the old version at least 3 times before I can use Personas.

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
If you do not need to use a proxy to connect to internet then select No Proxy

Proxy server with user/password

Hello,
I'm trying to use Jdev behind a firewall with ip + port + USERNAME + PASSWORD
How configure Jdev to work with this firewall
Option Preference Proxy does not give the choice of login/password preference...
Is there a config file where I can set my preferences?
Thank you

It is possible to configure the proxy host, port and exclude list via system properties, but not the authentication information.
To implement proxy authentication, you must add code to each place in your application where you use a URLConnection. In response to a status 407 response (Proxy Authentication Required), you must resend the request with a Proxy-Authorization header.
This is not trivial, since the content of the Proxy-Authorization header is dependent on the authentication scheme being used by the proxy. There are a number of different authentication schemes used by popular proxy servers. For instance, many people use a Microsoft proxy server which uses a proprietary authentication encoding mechanism known as NTLM to support authentication using Windows domain username / password combinations.
Anyway, this is why it's pretty hard to support username/password proxy authentication in Java applications, and hence why it's frequently not supported in apps like JDeveloper. Support for this is logged as an enhancement request, and we will eventually implement a solution.
Thanks,
Brian

Webclipping via proxy server with autorization

I am using a proxy server that requires authorization to access web pages. How can I configure the web clipping tool to use username and password during the authorization with the proxy server? The wireless portal configuration page has an option to define this username/pwd pair but it seems not to be used by the web clipping tool according to the application logs (DEBUG WcsTxLiaison: setupProxyAuthorization host = *******, user = null, scheme = null). I tried to access the web clipping tool by logging in on the hostname/webtools/login.uix page with both the orcladmin or my private username and navigating to the "services" tab and clicking on the "web clipping" tool link.
More debug messages:
(webclipping-web: DEBUG Provider Id = default_wireless_instance_id
webclipping-web: DEBUG Portlet Id = -1
webclipping-web: DEBUG Portlet Instance Id = default_wireless_service_id
webclipping-web: DEBUG Portal User Id = default_wireless_user_name

Does total commnder recognize http proxy gatewaying for ftp?
If so, can you capture the traffic between the total commander, the proxy, and the ftp server? (Use any available snoop commands to do this.) and paste it here?

Configuring a proxy server with username and passw...

Similar Messages

Maybe you are looking for