Configuring a Virtual Server with static IP problem - please help me

Hi,
I have a 2012 R2 server which has 1 Ethernet NIC adapter configured using a static IP (Web server).
Using Hyper-V on this dedicated server, I want to host 4 virtual servers, each with their own external static IP.
I figured I could set these up using this same NIC adapter (Shared)?
Every time I create an 'External network' in the 'Virtual Switch Manager' using this selected NIC adapter - it loses web connection and I have to switch to a KVM to reset the NIC adapter back to its original config.
I've tried enabling and disabling:
'Allow management operating system to share this network adapter'
But each results in the host server losing web connection entirely.
What am I doing wrong?
Many thanks for anything you can suggest or recommend me reading would be much appreciated.

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Similar Messages

Ichat with linksys Befsr41 problems please help

hi
i just got a linksys router model BEFSR41 and i cant get Ichat to work. i keep getting an error message that says "i did not respond", blah blah blah,. I have seen many post on the net but none that could give a clear way of showing me what to do with the router.
please help. i am running system 10.4.8 and the router is connected to a motorola cable modem. i use comcast high speed cable.
any help would greatly be appreciated.
thank you
John
power mac g5 dual 2 gig Mac OS X (10.4.8)

This chap has emailed me as well
The answer was:
Hi John,
If the Motorola is in Bridge mode (passes the public IP to the Linksys) then the Linksys can be left doing DHCP.
The Linksys is going to have to have the port open for iChat and AIM for the PC if that is what you are doing.
This page http://portforward.com/english/routers/port_forwarding/Linksys/BEFSR41-v3-v4-v5/ iChat.htm tells you how to access the Linksys.
Looking at the pics it has UPnP (Use the one in Administration) This will save you having to open any ports by any other method.
(not to mention that the ports listed for Port Forwarding on this site are wrong in iChat8 as they call it)
UPnP will allow all the Apps on all the computers to pen the ports as they need them. It is just an Enable/ Disable setting in Administration
On the Set Up page you will find the MTU setting. Try setting this to 1492 rather than the default 1500
On the Set Up page you will find the spot to disable DHCP. This will then mean setting Static addresses on the computers.
On the Mac it is done in System Preferences > Network
Go here and then Built-in Ethernet in the second drop down.
Go to the TCP/IP tab
In here as default, it will be set to Using DHCP and have the other details filled in. Make a note of these before turning Off DHCP in the Linksys
Change the drop down that read Using DHCP to Manual.
You will now have to fill in the text fields.
The computer can be 192.168.1.xxx where xxx is anything between ,2 and 255 (the Linksys itself is .1)
The Subnet mask is 255.255.255.0
The DNS will be whatever you have now.
The "router" is 192.168.1.1 as it is now.
Repeat for other Mac but add a different last number for the IP 192.168.1.3 for example
On the XP machine it is done buy changing the Properties in the Network Connection.
Go to Start > Control Panels
Pick out the Network Services one
Click on the one that is for the LAN network
Right click or use the Properties Button
Change as the mac was done. the last number of the Computer's IP will need to avoid the numbers for the Macs and router.
If the Motorola is in bridge mode it is easy enough to leave the Linksys doing DHCP and UPnP.
Also
On the Macs make sure System Preferences > Quicktime > Streaming tab has the drop down set to your Connection download speed.
Check in iChat > Preferences > Video section > Bandwidth Limit drop down that it is set to NONE.
If it still does not work try this:
Go to iChat > Preferences > Accounts.
Make sure you are logged out of AIM.
Go to the Server Setting tab
Change the 5190 port to 443
These are the most common things to check at your end.
10:53 PM Monday; December 4, 2006

Home Media Server with iTunes...Please Help!

Hello,
My goal:
Set up mac mini as iTunes server that stores music on NAS.
I want to be able to connect with multiple laptops.
Also, I want to be able to purchase from the laptops and download to the NAS so that all of my libraries are the same.
Is there a way to configure this in iTunes, or do I need to use a 3rd party application( If so, boooo apple).
Thanks in advance!
-UDC

You are a LIFESAVER!!!!! It worked & my phone is syncing.... No one at the "apple" help desk has been able to help me all week. THANK YOU so much...
Can the phone not handle that many podcasts at once? I have a 16GB phone...

Virtual Server on Mac OSX. Please help!

Hello everyone,
I currently have VMWare Fusion running a Windows virtual machine on Leopard OSX. I was wondering if it was possible to communicate from the Mac OS to that virtual machine as if it were a server on a LAN.
Thanks for your time.

If you had the network setting to be Bridged, then the VM would receive an IP on the same network as the physical box.

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

How to Configure a mail server with OIM

Experts ,
Any idea/links/Docs on how to configure a mail server with OIM and to send mail notification to someone .
Pardon me, if my questions seems to be incomplete .
Thanks
Suren

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

/dev/poll with libevent problem Please help me!!!

libevent compiled fine, but not worked.
When i run "make verify" i got reply:
cd ./test && make verify
Running tests:
KQUEUE
Skipping test
DEVPOLL
test-eof: [warn] ioctl: DP_POLL: Invalid argument
FAILED
test-weof: [warn] ioctl: DP_POLL: Invalid argument
FAILED
test-time: [warn] ioctl: DP_POLL: Invalid argument
FAILED
regress: [warn] ioctl: DP_POLL: Invalid argument
FAILED
POLL
test-eof: OKAY
test-weof: OKAY
test-time: OKAY
regress: OKAY
SELECT
test-eof: OKAY
test-weof: OKAY
test-time: OKAY
regress: OKAY
RTSIG
Skipping test
EPOLL
Skipping test
Answer on uname -a
SunOS gamesys01 5.10 Generic_118822-02 sun4u sparc SUNW,Sun-Fire-V490
I am trying to compile libevent v1.0, v1.0c, v1.1, v1.1a with some effect. Please help me. Oua project did not work without memcached who using libevent. How can i solve this problem?

I am already find cure for this problem. It is here: http://forum.sun.com/thread.jspa?forumID=272&threadID=26396

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

What is wrong with this!! please help

Hello friends,
I'm a learner and I have done lot of JDBC connectivity with Acess database, and now I want to connect java program with oracle database, but the problem is I have downloaded the oracle driver, set the classpath, and I have created the DataSource Name with MS-ODBC, I could able to compile but I'm getting run time exception, please help me with this. regards, shabeer.
the program is
import java.sql.*;
public class ShabeerJdbc {
public static void main(String args[]) {
// String url = "jdbc:oracle:thin:@imran:3339:shabeerjdbc";
Connection con;
String createString;
createString = "create table COFFEES " +
"(COF_NAME VARCHAR(32), " +
"SUP_ID INTEGER, " +
"PRICE FLOAT, " +
"SALES INTEGER, " +
"TOTAL INTEGER)";
Statement stmt;
try {
System.out.println("shabeer1");
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
System.out.println("shabeer2");
} catch(java.lang.Exception e) {
System.out.println("shabeer3");
System.err.print("ClassNotFoundException: ");
System.out.println("shabeer4");
System.err.println(e.getMessage());
try {
System.out.println("shabeer55");
con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:shabeerjdbc", "system", "mehar");
System.out.println("shabeer6");
stmt = con.createStatement();
System.out.println("shabeer7");
stmt.executeUpdate(createString);
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
the run time error is ......
C:\JavaPractice>java ShabeerJdbc
shabeer1
shabeer2
shabeer55
Exception in thread "main" java.lang.NoClassDefFoundError: java/sql/Savepoint
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at ShabeerJdbc.main(ShabeerJdbc.java:38)
****************************************

HI Deriderj, thanks for your response, well I have changed the Datasourse name to SID which is "Imran" and still it is not working....do I need to download anymore driver or whether they be bundled with the ojdbc.jar, please advice me. What if I want to use another driver as you mentioned...not to use thin: what other drivers will be available for the Oracle9.2.0.1.0 please advice me, thanks a lot
My SID name is "Imran"
listening port is is 1521
odbc datasource name is "shabeerjdbc"
I'm a very biginner and I'm facing too much problem, please help me. Well I have got Oracle9.2.0.1.0 loaded as the database and soon after I intstalled it I have copied ojdbc14.jar into my java classpath and I'm trying to connect to this data base. I dont know what driver I should use, neither I downloaded any. I'm just mentioning thin: in my URL. But It is giving error, can u please tell me what driver should I mention in the URL, and why I'm getting this error, Here is the code that is compiling without errors.
import java.sql.*;
public class ShabeerJdbc {
public static void main(String args[]) {
Connection con;
String createString;
createString = "create table COFFEES " +
"(COF_NAME VARCHAR(32), " +
"SUP_ID INTEGER, " +
"PRICE FLOAT, " +
"SALES INTEGER, " +
"TOTAL INTEGER)";
Statement stmt;
try {
     System.out.println("shabeer1");
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
     System.out.println("shabeer2");
} catch(java.lang.Exception e) {
     System.out.println("shabeer3");
System.err.print("ClassNotFoundException: ");
     System.out.println("shabeer4");
System.err.println(e.getMessage());
try {
     System.out.println("shabeer55");
con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:Imran", "system", "mehar");
     System.out.println("shabeer6");
     stmt = con.createStatement();
     System.out.println("shabeer7");
     stmt.executeUpdate(createString);
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("Sql Exception" + ex.getMessage());
************The runtime Error it is giving is *********************
C:\JavaPractice>java ShabeerJdbc
shabeer1
shabeer2
shabeer55
Exception in thread "main" java.lang.NoClassDefFoundError: java/sql/Savepoint
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at ShabeerJdbc.main(ShabeerJdbc.java:38)
***************************** please help me....

System D.O.T automatically why? problem please help me

hello everybody,
please help me my system says at post message that wrong cmos information then gives me option to boot or go to bios when i check my bios , my ONBOARD LAN GETS ENABLED AUTOMATICALLY ,the Frequency tab i check says something like PRIVATE DOT ENABLED AND CPU+AGP SOMETHING i mean my comptuer gets fast and the CPU fan becomes on full speed and i hear loud noise until Corecenter runs it becomes quiet again. the question is is this a bios fault or something , DID ANYBODY WHO BOUGHT 865PE PLATINIUM BOARD EXPERIENCE THIS PROBLEM PLEASE HELP ME MY CONFIGURATIONS ARE BELOW
PENTIUM 2.40 GHZ PRESCOTT (54 C MAXIMUM)
MSI 865PE PLATINIUM BOARD (IT GOT NO RAID ABILITY)
DDR 400 MHZ KINGSTON SINGLE CHIP RAM (ALTHOUGH IT RUNS AT 333MHZ)
MSI GEFORCE FX 5200 T128 (64 BIT DAMN IT!!!)
MSI CD ROM
SONY FLOPPY
COMPUTER CASING WITH SMALL MINI ADDITIONAL FAN ON THE SIDE (IT RUNS MAYBE AND ALSO GIVES ELECTRIC SHOCK OR SOMTHING SOMETIMES)
STABIMATIC 500V AUTOMATIC STABILIZER(ALTHOUGH I HAVE UPS CAN SOME BODY TELL ME IS UPS ALSO STABILIZER OF APC(AMERICAN POWER ----)
AMI BIOS 3.4
SO CAN ANY BODY TELL ME IF THIS IS A PROBLEM OF BIOS SHOULD I UPGRADE TO LATEST
WHAT METHOD THROUGH AUTOUPDATE OR MANUAL , I ONLY ONCE DID MANUALLY ON MY DELL 4100 PIECE OF CAKE !

Hi,
Go to here for MSI LIVEUPDATE
http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=556&kind=1
Install and run program.........
BIOS problems:
http://www.msi.com.tw/html/support/bios/note/boot.htm
If you would like to download bios and install........
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=556&kind=1
You can also choose 3.7 if wish too first.....
I am sure this will help you.
Del

Urgent Problem please Help(hayat)

Hello Hi,
I want to Install Form 6.0 With Oracle 8i on Server
mean not personal oracle,
if i install first oracle 8i and then form 6.0 then
they overwrite their homes and vice versa.
What method i use to control this problem.
please help me so that i install form 6.0 on oracle 8i server.
thanks
hayat

Ok, I have read the sun site and downloaded the JDK and saved it to disk in the C:\ drive.
However I still get the same error so I think I must be very stupid and I think the computer knows that.

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

Configuring a Virtual Server with static IP problem - please help me

Similar Messages

Maybe you are looking for