Configuring Admin Util to allow me to use VPN AND surf the rest of the net

I am having a problem when I connect to my work network via VPN. When I do, I can no longer connect to the rest of the Internet. I was able to do this until I started using an Express (so it has been allowed by my work network).
Here's my setup: Express is connected via Ethernet to my Verizon Fios modem. When I connect my computer directly to the Verizon modem all works fine. I have been advised that what's happening is that my Airport Express is creating a behind-the-device network that has the same exact IP address space as your office's network (when I'm connected to it via VPN).
To fix this I've been told to "Go into the Airport administration app, click on the "Internet" icon at the top of the configuration pane for your AE, then click on the "DHCP" tab, and look at what the "DHCP Range" pull-down menu is currently set to. After writing this down (in case you need to go back to it), change to one of the other options -- e.g., if it's currently set to "10.0.", change to "192.168." or "172.16". That should be enough to move you completely out of the space that your VPN is using. Save the changes, let your AE reboot, and try using the VPN and the internet at the same time again."
The problem is that the advisor is using Airport Admin Util version 5.x and I am using version 4.2. The screen he suggests is not where his is in his version. Could someone advise me of how I can do this via 4.2?

Reset your iPad and see if that fixes this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

I have increasing problems using Firefox to surf the net. I cannot install ANY Adobe product. I have no ability to see and hear ANY videos. Today I cannot access the Earthlink website, although I can on Internet Explorer.

I always get error message such as my plug-ins are disabled or I need the newer version of Adobe or Java programs. When I download and install them, they do not work and I get the same error messages.

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Using the icons on the bottom of my iPad mini screen I have always been able to check email and surf the net using Safari as well as storing all my photographs. Suddenly these boxes are empty and I cannot do anything and seem to have lost all of my photo

I have owned my iPad Mini for 9 months now and am still a novice great granny! Today I cannot use Safari as it has just gone blank. I cannot retrieve emails, again the screen is blank and all my photographs have disappeared. Can anyone help me to retrieve this.

Reset your iPad and see if that fixes this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

I teach neuroanatomy and am looking for an app that would allow me to use a stylus on the iPad to label a wordforMac or powerpoint document. Any suggestions?

Help needed: I teach neuroanatomy and am looking for an app that would allow me to use a stylus on the iPad screen to label diagrams in wordforMac or powerpoint format. Any suggestions?

I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...

I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.

I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.

Apple discontinued support for PowerPC apps with Lion, I think, so you're out of luck there. No patch coming, unfortunately. Best to upgrade whatever old applications you have or, since it seems like you're using some relatively old software, scout around for replacements that give you the functionality you need.
Go to Apple menu > System Preferences > Print & Scan and select your scanner from the list--if it's not there you'll need to add it (start with the little plus icon). Once you have it in the list you can click on the Open Scanner button and a pretty barebones scanner driver will load for you. But Image Capture (as mentioned previously), found in your Applications folder, will probably do the job as adequately, or better, than your old scanner software.

How to Restrict printing the document using IRM for a Single Document?Allow printing for some documents and restrict the printing for particular documents in same document library?

Can we able to Configure the IRM in Document Level in SharePoint Document libraries?
The document library contains multiple document sets , Can we restrict the printing according to document sets? Allow printing for some documents and restrict the printing for particular documents in same document library
Is this possible?Please suggest.

Yes, that can be done. But note that all administrators will have the same right to print, so you need to make sure the users are not administrators. You can include a macro to disable printing, but if the users disable macro, they can print the documents.
Hence, there is no foolproof way to prevent printing documents. If you still need a foolproof security, PDF format provides password based security (viewing doesn't require a password) that can be implemented to prevent the document from printing,
which doesn't require any special scripts and is tough.
You can have a look at the following links:
http://msdn.microsoft.com/en-us/library/office/ms458245(v=office.14).aspx
http://msgroups.net/microsoft.public.word.docmanagement/prevent-printing-of-docum/91353
http://www.go4sharepoint.com/Forum/prevent-printing-saving-documents-10150.aspx
The following link explains about the security features in PDF. This is for information purpose only and not for promotion of any products:
http://www.pdflib.com/knowledge-base/pdf-security/
Balaji Kundalam

I am using VPN, and Firefox is loading the page. Before I reinstall the new version, the VPN was working okay. Whta happened, what I am supposed to do?

I am using VPN, and Firefox is loading the page. Before I reinstall the new version, the VPN was working okay. Whta happened, what I am supposed to do?
I have to use the VPN to acess the site because of the limitatation , and it was working okay. When I do turn off the VPN, then the sites will open, but if I activate the VPN, then site will load for ever, but they won't load.
Please advise me what to do?

You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

How to edit bitmap which is imported in flash using xml and save the edited bitmap back to xml in flash.

hi all
It would be appreciated if any one let me know how to edit
bitmap which is imported in flash using xml and save the edited
bitmap back to xml in flash.
Is it posible to save the bitmap data in flash?
thanks in advance

Yes you can... but like I said before you need to upload the
data from the changes you make to a server.
In terms of the solution... its unlikely that you'll find one
specifically for your needs. You will have to learn whatever you
don't know how already and maybe adapt some existing examples to
your needs.
To change the visual state of a movie clip... you just do all
the regular things that you want to do to it using flash... scale,
rotation, drawing API , textfields etc in actionscript. If you
don't know how to how to do that stuff, then you need to learn that
first. That's basic actionscript.
You can capture the visual state of a movieclip using the
BitmapData class. That includes a loaded jpeg. You can also
manipulate bimatp data using the same class. You should read up on
that if you don't know how to use it or check out the examples
below for uploading info.
For uploading to the server:
Here's an as2 solution that took 15 secs to find using
google:
http://www.quasimondo.com/archives/000645.php
If you're using as3, google search for "jpeg encoder as3" and
look through that info. There are also historical answers in the
forums here related to this type of thing that might help as
well.

Can I copy one frame of a movie using iMove and save the frame as a file that can be printed like a picture?

Can I copy one frame of a movie using iMovie and save the frame as a file that can be printed like a picture? If so, how do I do that?

You could if you want a postcard sized print.
Printers need a lot more "dots" per inch and even a 1920X1080 video doesn't have enough "dots" to make more than a postcard.
Look at the "More Like This" links at the right side of this page for instructions.

Help: How to Validate XML using SAXParser and return the entire error list

Hi,
I have a problem, I'm trying to validate a xml document against the DTD. Here Im using SAXParser and having the ErrorHandler object passed when setting the error Handler, like parser.setErrorHandler(errorHandlerObj).
I need an output like where the entire XML document is read and all the errors have to be reported with the line number.
like example:
<b>Line 6: <promp>
[Error]:Element type "promp" must be declared.
Line 8: </prompt>
[Fatal Error]:The end-tag for element type "promp" must end with a '>' delimiter.
who can i achieve this.</b>
what happens with the present code is that it throws the first error it encountered and comes out.
how can i solve this problem

You can try to set the following feature to 'true' for your SAXParser:
http://apache.org/xml/features/continue-after-fatal-error
At least Xerces supports this feature.

How come there are no hidden objects games in the South African App Store and y does safari not allow you to get it downloaded from the net. There are only games for kids in the App Store. Can anyone help

How come there are no hidden objects games in the South African App Store and y does safari not allow you to get it downloaded from the net. There are only games for kids in the App Store. Can anyone help. Is the South African apple ipad only for children

Nobody here is responsible for what is or is not available in any country. I believe it is a software licensing thing.

When I try to open Safari, I get NCSW21 and that server can't be found. This happens everytime. I am using AirPort and have a strong internet signal. I have no problem opening Firefox and surfing the web. Only with the Safari page. Can anybody help.

Can't open Safari. I get "Can't find server". I get NCSW21 in my address bar. I am using AirPort and have a strong internet signal. I have no problem opening Firefox and surfing the web. Need help. Thanks

Hi Professor66,
I have a couple of suggestions for you regarding this issue. Here are two links to users who have posted similar questions to yours and have found their answers in the responses to their posts:
Safari hangs when loading web pages. | Apple Support Communities
https://discussions.apple.com/thread/3784708
Safari loading blank pages | Apple Support Communities
https://discussions.apple.com/thread/3899912
I would suggest that you first follow the troubleshooting that the OP did in the second link, which is to test in a new user account to see if the behavior is consistent. If it is, you may need to address the issue at a software level by re-installing Safari. More information on this process can be found in the following article:
OS X Mavericks: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH14193
Thanks for coming to the Apple Support Communities!
Regards,
Braden

My mac can't connect to belkin router? My mac can connect but I still can't surf the net? Help Please... This is my first time to use mac and belkin.

My mac can't connect to belkin router? My mac can connect but I still can't surf the net? Help Please... This is my first time to use mac and belkin.

Is it Wireless you're trying to connect with?
Which Mac?
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

I cannot read, use my iPad outdoors? Cannot read books, surf the net; nothing. Apple sold me a screen guard to helpmwith the glare, 've adjusted the settings to just about every combination but still nothing. HELP!!

I cannot read, use my iPad outdoors? Cannot read books, surf the net; nothing. Apple sold me a screen guard to help with the glare, I've adjusted the settings to just about every combination but still nothing. HELP!!

Turning the brightness up as much as possible will help a little. However, as Skydiver notes, screens like those used in tablets and cell phones don't work well in bright sun. That's why I have a Kindle for reading outside. Not to mention, I'd feel a lot less awful if I got sand in a $100 ereader than if I got it in my $700 iPad.

Configuring Admin Util to allow me to use VPN AND surf the rest of the net

Similar Messages

Maybe you are looking for