Configuring AEBS for ssh to Windows box

I'm trying to access a Windows 2000 box that is on the same network as my MBP - both served by an AEBS. When I try to access the W2K box from work I get a connection time out error.
I've used the Airport Utility to open port 22 and forward it to the Windows box. On the Windows box I've installed Cygwin and am running the OpenSSH server. I've set the timeout to a huge number and ensured that hosts.allow is set to permit sshd access.
Since I've got a dynamic IP I'm using a DynDNS account, which is what I'm trying to use from outside my home network. Within my network I'm able to ssh to the Windows box using the W2K host name.
Is there something that I'm missing?
All help greatly appreciated!
Thanks.
Les

Have you looked at Service For UNIX 3.5 from Microsoft? Or Windows 2003 R2?
They have Indentity Management and provide other Single Sign-On abilties for UNIX machines.

Similar Messages

How to configure apache for ssl in windows platform

hi all,
can anyone help me expalin how to configure apache for ssl in windows platform.

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

Configuration example for QuickVPN on Windows 8.1 and RV016

I have been using a gateway-to-gateway VPN for years between two RV016 routers. I am adding a few Surface Pro tablets for our salesman and I need to configure VPN clients on one of the routers. Can this be done? Can anyone provide an example of this setup?

The current release supports the white-space property for a text area and it is possible that the website uses white-space: pre instead of white-space: pre-wrap.
The former will prevent Firefox from wrapping the text.
You can check that in the Inspector via the right-click context menu.
*https://developer.mozilla.org/Tools/Page_Inspector
See:
*https://developer.mozilla.org/en-US/Firefox/Releases/36#CSS
<blockquote>The white-space property is now working on <textarea> HTML elements (bug 82711).</blockquote>
See also:
*[[/questions/1050456]] Word wrap problems in 36.0

Configuring LDAP for WEBASJAVA with Windows ADS LDAP

Dear All,
      I have installed Windows ADS with windows LDAP on a server and Webas java on another server. How to configure UME of WEBAS JAVA to connect with Windows ADS. How to do the LDAP integration?
   Please guide me.
Regards
Arun

HI,
   I instalIed Webas JAva NW04 SP 20.During LDAP config with Microsoft ADS, test connection it works, but if i try Authentication test it says authentication failed , no user found(i tried Administrator user). After i restarted now im able to see all the ads users but still Authentication failed error is there.
Thanks n Regards
ARun

Run rcu.sh on linx thru remotely (from windows box using putty) for OIM11g

Hi All,
We have to run RCU 11.1.1.5 on linx box, remotely(using putty from windows box). Can we get GUI to complete the steps while executing "rcuHome/bin/rcu.sh" by connecting remotely.
Note: we dont have any Xwindows service is running on the linx box, and we dont have Graphic cards also.
If the GUI is not possible, Can we get CUI for this installation of rcu for oim 11g? Please suggest us. or do let me know, in case of any information.
Thanks in Advance!!!

Hi bagaria,
Thanks for your help on rcu using CLI. How ever, we want to install oim 11.1.1.5.0 and SOA 11.1.1.5 as part of upgradtion from oim 9.1 to oim 11g. Now we are going to install oim and SOA on linux x86 (64bit) box with CLI(GUI is not available here). I have gone through the link CLI for ofm(http://download.oracle.com/docs/cd/E14571_01/install.1111/b32474/silent_install.htm#BABJGBHJ), and we have below questions, can you please clearify us.
1. Can we use response file on linx, which was produced on windows OS?
I have gone thru the link (http://download.oracle.com/docs/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149) to execute below steps using CLI.
1. We have to upgrade oim9.1's oim schema by running "MW_HOME/Oracle_IDM1/bin/ua.sh" to upgrade oim schema.
2. We need to run the same ua.sh to upgrade Oracle Identity Manager Middle Tier, after configuration of oim 11g and soa.
Step 1 and 2, we have to run thru Command line Interface.There is info for step 2, but not for step1. can you please help me on step1.
How ever, for step2, I have gone thru the link (http://download.oracle.com/docs/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm#CACDDEEE)
its GUI and here,(section 13.14 Task 12: Use Upgrade Assistant to Upgrade Oracle Identity Manager Middle Tier), we are providing the following
information
1. (step 7, in the doc) Specify OIM Database
2. (step 9, in the doc) Specify MDS Database
3. (step 13, in the doc)Specify WebLogic Server
For Command Line Interface, the link (http://download.oracle.com/docs/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm)
we are providing only "WebLogic Server" information.
ORACLE_HOME/bin/ua MT
-sourceHome SOURCE_ORACLE_HOME
-destInstanceHome ORACLE_INSTANCE
[-logLevel log_level]
[-[no]verbose]
[-[no]silent]
[-[no]retainPorts]
[-[no]stopComponents]
[-[no]startComponents]
[-wlsHost wls_host]
[-wlsPort wls_port]
[-wlsUserName wls_user]
[-invPtrLoc inventory_location]
Not providing any DB inforamtion, here.
Why are we not providing DB schema information to ua.sh when we run that using CLI? or Am I missing any thing?
Thanks.
Edited by: user13285646 on Aug 10, 2011 2:05 PM

When trying to install itunes on windows 7 i got a configuration data for this product is corrupt?

It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
Trying to update my ipad....but I first need to install itunes!!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it loses my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

I wanted to install windows for Mac and I had vista so I put I the disk and installed followed the steps it then it closed my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

The two other posts are correct... so I'll just clarify. What's happening right now is your system is trying to boot into Windows in order to finish the installation. What you want to do is make it boot into OS X. As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on. You will eventually be presented with an option to select which partition you would like to boot from. Choose OS X. After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X. What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition.

TS4123 When I run autoruns as suggested by TS4123, a DOS program runs but no Windows box opens, so I can't check for LSP conflicts

I am trying to troubleshoot an iTunes problem, which may be related to the resources issue that has been previously identified.
My problem is that once iTunes has been running for more than half a day or so, when I play music the program "skips" through the song, playing snippets a fraction of a second long. A 4 minute song will be done in a few seconds. The program then skips to the next song and this repeats. Rebooting solves the problems for a few hours, then it reoccurs. Other symptoms include iTunes not responding quickly, especially to closing it.
As per TS4123, I tried to rune the Autoruns program to see if I had a conflict. I launched the program and a DOS box opens and runs some command line items, but nothing else happens. I don't see a Windows box like I should.
Help on either problem?
I am running Win4, 64bit, on an HP desktop. I have updated video and audio drivers.

You should run the windows based file AUTORUNS.exe instead.

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Java 1.4.2_03 Windows: The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

Why am I getting different results for the same resolution but different Windows boxes, Win 7 and XP

I am running an .exe on two different windows boxes, one in Win 7 and one on XP. I set both for resolution 1024 x 768.
On Win 7 (laptop and old Dell desktop) I have a great looking app. On the WIn XP boxes all the fonts to large. THis doesn't make sense to me as all the PC's have the same resolution.
Has anyone run across this before?
Mark Ramsdale
Solved!
Go to Solution.

The system fonts for XP and Vista/Win7 are different.
See
http://forums.ni.com/t5/LabVIEW/Elements-have-moved-when-opening-vi-with-f3-patch/m-p/1054817
http://forums.ni.com/t5/LabVIEW/What-can-affect-the-size-of-a-front-panel-object-between/m-p/1058607...
http://forums.ni.com/t5/LabVIEW/Font-size-on-Windows-7-with-LabVIEW-2009/m-p/1055114/highlight/true#...
and several other similar threads.

HT202577 Is the apple configurator available for Windows in order to push profiles to apple TVs?

We currently have a windows environment at work and use 802.1x authentication and have some 1st generation apple TVs. We would like to get them on our wireless but are having issues. I would like to push profiles to these apple TVs to see if I can get them on but I am not going to buy a Mac to do it.
Is the apple configurator available for Windows or even ubuntu?

Hello,
Thanks for using Apple Support Communities.
Apple Configurator requires both Mac OS X, and the most up to date version of iTunes, and can only be installed from the Mac App Store.
Mac App Store - Apple Configurator
Cheers,
Alex H.

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Updating to windows 10 fails on the "Configuring update for Windows 10" screen

Hi, I have a problem with the Windows 10 update on my Lenovo Miix 3 (8") tablet. Whenever the update succesfully downloads, runs the preparing stage for quite a bit, than prompts me to start the upgrade (in the windows 10 update app). When I click it initiates a restart and starts the "Configuring update for Windows 10" screen, but stays on 0% for a minute, than reboots the original system, and the update does not continue. As I log back in the Windows Update window pops up and after a few seconds prompts me to download windows 10 (again). I have already installed a windows 10 in a similar manner on a PC without any hickups. For me it looks like for whatever reason the update fails in the configuring stage, right before reboot. Anyone met this before and maybe have some solution, or should I just try it with a bootable pendrive?

I have same model and sadly, the same problem. It seems to me that the reboot interupts the install and when you sign in again it nulifies the install needing you to start again. On my laptop the reboots went back into the install without needing a login. Hopefully if enough people have same problem a remedy will be found.

How to Configuring case sensitivity for NFS on Windows Server 2012

Configure Case Sensitivity for File and Folder Names
http://technet.microsoft.com/en-us/library/cc725747.aspx
To configure case sensitivity for file and folder names using the command prompt
Open a command prompt.
To enable case sensitivity, type:
nfsadmin server [ComputerName] config casesensitivelookups=yes
But, "casesensitivelookups" is removed in Windows 2012 version.
Help Me~

Hi,
Sorry for the delayed response.
According to the following article, we still can use
nfsadmin to configure case sensitivity for Server for NFS in Windows Server 2012.
Nfsadmin
http://technet.microsoft.com/en-us/library/cc771599.aspx
Note:We
need to disable Windows kernel case-insensitivity in order for Server for NFS to support case-sensitive file names. We can disable Windows kernel case-insensitivity by clearing the following registry key to 0:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel
DWORD “obcaseinsensitive”
Hope it helps.
Best regards,
Frank Shen

Configuring AEBS for ssh to Windows box

Similar Messages

Maybe you are looking for