Configuring Alert Monitor

Hi Friends,
I have installed the Netweaver Full ABAP Preview edition in a WinXP system and trying to setup CCMS locally. Currently I don't see any data under the Alert Monitor(RZ20). I just see the tree elements but no monitors under them. What do I need to do to get data in the tree. Below are some of the steps that I have tried after reading some documentation
1. Created CSMREG user
2. Created CSMCONF file
3. Tried to register the CCMS agent by executing sapccmsr.exe -R. But after I provide the password for CSMREG user the process quits with the below error
ERROR: Registration failed: Can't get version of NSP.C_CALL_FAILED. RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
Even tried with the command sapccmsr.exe -R pf=<path to the profile file> but it quits at once with the error Cannot open Monioting Segment 99 MoniSegmentSize too small
I believe the Netweaver Preview edition has all the CCMS agent installed.
Can someone please help me with setting up the Alert Monitor.
Regards,
Jagannath

Hi Gary,
Here's mine
C:\SAP\NSP\SYS\exe\run>sapccm4x.exe -v
      CCMS version 20040229, 32 bit, multithreaded, Non-Unicode
      compiled at   Jul 12 2006
      systemid      560 (PC with Windows NT)
      relno         7000
      patch text    patch collection 2006/3, OSS note 914721
      patchno       68
      intno         20050900
      running on    APP-XP3 Windows NT 5.1 2600 Service Pack 2 Intel 801586 (Mod
2 Step 4)
C:\SAP\NSP\SYS\exe\run>"disp+work.exe" -v|more
disp+work information
kernel release                700
kernel make variant           700_COR
DBMS client library
compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode              Non-Unicode
compile time                  Jul 12 2006 23:00:08
update level                  0
patch number                  68
source id                     0.068
supported environment
database (SAP, table SVERS)   700
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Regards,
Jagannath

Similar Messages

CCMS - Alert Monitoring

Dear All,
I have just installed IDES 4.7 Release SR 2.0
Now I want to configure Alert Monitoring using RZ20. Can you please explain step by step as I am new person in the CCMS area.
Thanks in advance
LK

Hi,
Please check this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c8ecb690-0201-0010-4e88-f8f56d2b8d65
With Regards,
Saurabh

Alert Monitoring and Notification Mails

I have a requirement to configure CCMS in XI system in such a way that the alerts trigger mails to the outlook users.
This is required in J2EE engine also.
Please tell the T-Codes and Steps.
Thanks

Hi Asad,
When your CCMS is not configured you can only do individual monitoring.
To configure the same you must decide which system is to be the central system for the SCR.
To know what SCR is and to know more about it please go through this link.
https://help.sap.com/saphelp_nw04s/helpdata/en/1e/ec9e38f0d92936e10000009b38f8cf/content.htm
After doing the same please follow these steps.
Log on to the system that is to contain the central repository.
- Choose CCMS ® Configuration ® Alert Monitor, or call transaction RZ21.
- Choose Technical Infrastructure ® System Repository ® Set Repository Role.
- The system displays the Set Repository Role in Central System Administration screen. Choose Central Repository.
And also go through the following links. This I guess will help you solve your problem and I guess it answers your question.
https://help.sap.com/saphelp_nw04s/helpdata/en/e5/15a0380d134f6fe10000009b38f8cf/content.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Regards,
Abhy
PS: Award points for helpful answers.

Alert Monitoring log

Hi,
When I configured alert monitoring. Alert is creating when I run report SXMSALERT_PROCESS_DATA_GET. But this alert is not reflecting in the alert inbox eventhough all configuration done. Then I have gone to log then I found errors as follows.
warning: Address receiptent of "KPRKS00" (INT) could not be determined. ( I configured this user as single receiptent in tcode alrtcatdef).
ERROR: send Request for INT has no receipients.
Any help in this regard is welcome. Thanks in advance.
Thanks,
Mallikarjun.M

Hi,
I follwed according to your steps. Finally I checked in alert Monitoring log, In that I noticed error as follows.
warning: Address receiptant of "KPSSO" (INT)could not determined.
ERROR: BCS Exception (DNS_SREQ) occured.
I notice this is bcoz in tcode "ALERTCATDEF" in configuraiton I selected "internal processing".
I hope a favourable reply. Thanks in advance.
Thnaks,
Mallikarjun.M

CCMS Alert Monitor (edit monitor-configuration.xml. ?)

Hi Friends
I'm trying to change the default polling time for the CCMS Alert Monitor, 5 minutes instead of 30 minutes.
In http://help.sap.com/saphelp_nwpi71/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm you can read:
Accuracy
The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the SAP NetWeaver Administrator as follows:
1. Choose Availability and Performance Management ® Resource Monitoring ® Java System Reports (alias: /nwa/java-sys-reports).
2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
3. Choose Configuration in the right-hand pane.
4. Choose Edit in the dialog box that appears.
5. Change the polling period to 5 minutes, for instance.
6. Choose Save and wait until saving is finished (be patient, since this may take a while).
7. Choose Configuration Management ® Infrastructure Management ® Java Configuration Browser.
8. Choose apps ® sap.com ® com.sap.aii.af.app ® Monitoring Configurator ® monitor-configuration.xml.
9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
10. Save the modified xml file.
11. Choose Operations Management ® Infrastructure Management ® Start & Stop ® Java EE Services to restart the Monitoring service to apply the changes.
But in step 9, the xml file I've found in my PI 7.1 (SP6) is this:
<monitor-configuration>
<monitor-semantics />
<monitor-tree />
</monitor-configuration>
Also, there is no way to modify that file, you can only display it or download it.
can anyone tell me how to edit the file.
regards
raja

Hi Raja,
This is the same as doing the following:
You can locate the monitor-configuration.xml file in the SDA com.sap.aii.af.app.sda (inside META-INF folder). You can find this SDA in the install directory of PI installation. In this XML file please locate and edit the following tag:
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="30" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
Change the above to the following *************
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="5" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
The main change is the polled-by-template value from 30 mins to 5 mins as per your req ******
Construct back the SDA (you can search SDN for that) with this edited XML and then redeploy this SDA with the help of JSPM tool.
This will re-start the PI Server for the changes to come into effect.
I hope this helps.
PS: You can consult your BASIS consultant to locate this sda and re-deploy it on PI Server.
Regards, Gaurav.

CCMS - Alert monitor configuration

Hi
We are configuring the CCMS Alert monitor for monitoring the R/3 systems. We are referring sap help and sap notes, but also we are looking for document which instructs the complete configuration, will be appreciated if share the same.
regards,
rajesh

Hi rajesh,
Have you checked the iTutor files in
http://service.sap.com/rkt --> SAP Solution Manager 4.0 --> Technology Consultants and System Administr
These are really good documents with step by step instuctions and screen
Thanks
Prince Jose

How to configure Alerts with out CCMS

Hi All,
Is there any chance to configure Alert management
or just alert if u get any error in adapter Monitor or message moni. please advice me. i want to get alert mail when there is an error in adapter moni or message moni.
Thanks in Advance.
Sriram

Hi,
Yes u can raise an alert:
For raising an alert you need to first configure the alert please follow the below weblog written by Michal Krawczyk
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Configuration steps are: go to transaction ALRTCATDEF
1) Define Alert Category
2) Create container elements which are used for holding an error messages.
3) Recipient Determination.
Alert can be triggered in different ways.
1) Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
2) Triggering by Calling a Function Module in the Workplace Plug-In.
3) Triggering with an Event Linkage.
4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)
5) Triggering from a Workflow.
6) Triggering from CCMS with autoreaction.
7) Triggering from BPM.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
8) Triggering alert by configuring a rule from RWB.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
THis will raise adapter and integration engine related errors.
Hope this will help you.
Thnx
Chirag

Configuring Alert in RZ20 from Java system

Hi Experts!!!
We have configured solman for ccms alert monitoring,We get the alerts displayed inthe solman for all the system in the landscape.But is it possible for us to monitor the java system (add-in installation) using rz20 from the abap system.We have configured the csmreg user and generated file and also registered the user through visual admin,But in the j2ee engines there data is not displayed.There were no errors occured during the configuration.
Regards,
Vamshi.

Have you changed your java administrator password recently? If so, have you changed it in the configtool as well?
Kind regards,
Mark

XI Alert Categories in CCMS alert monitor

We defined an alert category through ALRTCATDEF and we generate alerts using SALRT_CREATE_LOCAL in the Graphical and Java mapping. We would like these alerts to be visible in CCMS alert monitor in addition to XI alert inbox. We have done config specified in the SAP documentation to get the RWB alerts in CCMS alert monitor, but only the alert categories for which alert rules are defined in RWB are visible, at the moment. IS this because we dont have an alert rule for the alert categories called by SALRT_CREATE_LOCAL,we are not able to see them in CCMS? Is there a way to get around this problem and get these alerts also in the CCMS ?

HI,
See the below links may be helpful..
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 -- ccms alerts - 1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 -- ccms alerts -- 2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 -- ccms alerts --- 3
Regards
Chilla

Alert Monitor with exceptions in WAD

Hi All,
I'm trying to use alert monitor in web application designer to show two queries with red, green and yellow statuses. In my web template, I have inserted two queries in two tables (both queries have exceptions) and alert monitor as web item. In properties(context menu), I choose infocube on which these queries are build,marked the red, yellow, green status ,mentioned them in list of columns entry and checked the display toolbar entry.
When I execute , It shows the display of alert monitor drop down box with functions (from Info provider, info area, queries..etc) and alert boxes for red, yellow and green. If I check on red box and uncheck other boxes, still I'm seeing all records with other status as well. There is no change in the query result if I switch from red , green or yellow. And also I am not seeing how many rows of red , green or yellow alerts which i should as i have selected in the list of columns entry.
I've set the exceptions in Reporting Agent for these two queries also.
Any Idea why I'm not getting the functionality of alert monitor. Do I need to set up something for alert monitor to work in reporting agent or in alert management in order to use .Am i missing something in configuration
Any ideas and solutions..
Thanks in advance,

LauQ,
Did you figure out the solution?? Is it something to do with the settings of exceptions in reporting agent. I strongly feel so, as the configuration for alert monitor is straight forward in WAD. There is a How to Guide document on..How to Intergrate BW reporting agent with Alert Framework. Did you have a look at it. I'm glancing it right now.. You can find in sdn.. May be that helps.. Please let me know if you get something... I'm still working on this issue..
Thanks ,
Veeru

Alert monitor for messages in error status

Hi, it is possible to configure de Xi Alert Monitor to show in the message body the error that shows the message monitoring?
In the SOAP header when there is an error y can see a tag "error" and it shows this info (for example):
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">STARTUP_EXCEPTION</SAP:Code>
<SAP:P1>com.sap.aii.utilxi.prop.api.PropertiesException</SAP:P1>
<SAP:P2>Unable to read configuration data (ExchangeProfil~</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred while starting the Java application "IntegrationServices"; restart the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It is a way to show any of this information in the message body that sends the Alert monitor?
Regards.
Mariano.

Hi,
you will not be able to get the entire msg payload of SXMB_MONI in alert.
But you can create a alert category and in its Long text you can have variables for Error Category and Error Text. So you will get alert mails with Error category and Error Text.
Regards,
Rajeev Gupta

ALERT MONITOR

Hello
I have configured the Alert Monitor, Alert is triggered, the message comes on the external mail.
But I have 2 questions related to the Alert Monitor.
1) Explain what the appointment of the following fields in the t-code ALRTCATDEF:
alrtcatdef -> Properties -> Max. No. of Dels
alrtcatdef -> Properties -> Expiry Time in Min.
If I understand correctly, these two parameters make it possible to limit the number sent to external e-mail messages to one Alert category for a specified period of time?
If so, I have this option does not work, it is ignored.
That is, point out in t-code ALRTCATDEF: 3 posts in 5 minutes. 10 generating error messages. I get 10 messages per mailbox.
(Error is generated by running a report, calling class PROXY, which obviously causes an error).
How to limit the number of outgoing messages to external mail Alert for one category for a specified period of time?
2) When an error occurs in the JDBC adapter (eg: "ORA-01400: cannot insert NULL into (" PI "." MY_TABLE "." FIELD_1 ")") can not get data from the container (t-code ALRTCATDEF):
SXMS_TO_ADAPTER_ERRTXT (Data Type - CHAR70)
SXMS_TO_ADAPTER_ERRLINES (Data Type - ALPF_STRING_TAB)
However, other containers, normally return their contents.
In t-code: alrtcatdef -> Long and Short Text -> Long Text (E-Mail, Fax) wrote the following:
Error in Adapter Engine: &SXMS_TO_ADAPTER_ERRTXT&.
Full text errors in Adapter Engine: &SXMS_TO_ADAPTER_ERRLINES []&.
How can I put in an error message JDBC adapter?
Software Component Version:
SAP_ABA: Release - 710, Level - 0007, Highest Support Package - SAPKA71007, Short Description - Cross-Application Component.
SAP_BASIS: Release - 710, Level - 0007, Highest Support Package - SAPKB71007, Short Description - SAP Basis Component.
ST-PI: Release - 2005_1_710, Level - 0003, Highest Support Package - SAPKITLQJ3, Short Description - SAP Solution Tools Plug-In.
PI_BASIS: Release - 2006_1_710, Level - 0007, Highest Support Package - SAPKIPYN07, Short Description - PI_BASIS 2006_1_710.
SAP_BW: Release - 710, Level - 0007, Highest Support Package - SAPKW71007, Short Description - SAP NetWeaver BI 7.1.

abhishek salvi wrote:>
>
How to limit the number of outgoing messages to external mail Alert for one category for a specified period of time?
> RWB --> Alert Rule Definition --> Suppress Multiple Alerts of this Rule
I know and use, but it has many disadvantages.
>
How can I put in an error message JDBC adapter?
> could not get your question....
>the second alert container that you defined will contain more alert details (number of characters).
The fact that SXMS_TO_ADAPTER_ERRLINES reflects more complete information about the error, I know. But I did not receive any information from SXMS_TO_ADAPTER_ERRTXT, and SXMS_TO_ADAPTER_ERRLINES.
Containers returns NULL, while the RWB in Message Monitoring error is displayed.

Alert monitoring unable to login

Hi
I am unable to login to the alert configuration / alert inbox in RWB . It fails saying authorization error . Can you please let me know what all authorizations are required for alert monitoring in RWB. we are using XI SP pack 16
any help on this is highly appreciated
regards
rajesh kr

Hi Raj,
Check these...
Unable to logon to Alert Configuration in RWB
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Alert Config
cheers,
Prashanth
P.S Please mark helpful answers

CCMS Alert Monitor

Hi guys,
is the alert monitor (RZ20) used
to configure email so as to alert
if a PC error occurs, does it
work as a central hub of monitoring?
Thanks,
Due points will be assigned

Hi Vijay,
RZ20 Tcode is used for CCMS maintanence.
and to configure mails to alert you to know any errors in PC is done through setting up distributionlist in SO23, and create message using context menu from the process type in PC.
Check your mailbox and you a good document on this...
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

How to Configure alert for process failures

Hi Friends.
How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
I am having very little experience in XI.
Please answer this with clear steps so that I can do it.

hi,
check the links below for all the details and help on configuring alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

Configuring Alert Monitor

Similar Messages

Maybe you are looking for