Configuring an Outgoing Batch in an agreement - Instance ID not coming back

create a batch in an agreement, click on start, then do several refresh, I do not have an instance ID sent back as mentioned in the documentation.
I tried this on 2 different BTS 2010 and 2013, they are both 64 bit, one is win 2008 the 2nd is on a win 2012 R2
Thanks for your help

I have enabled it but just right now, I noticed that it is in a disabled state. The error in the event log is :
The receive location "BatchControlMessageRecvLoc" with URL "SQL://SQL2K12/BizTalkMgmtDb/" is shutting down. Details:"The receive adapter on this receive location is not supported on 64-bit host instances. Please make sure that the receive adapter is
associated with a 32-bit only handler. ".
I have not played with BTS EDI since version 2009, does this mean that all EDI functionality need to be run on a 32 bit host?
I dont intend to use InstanceID anywhere, I am following lab 19 from MSDN BTS Training kit and it indicates that once we start the batch, 1 minute later we should refresh and InstanceID is displayed which is not hapopening on my box.
The reason is that I am followed the lab 19 when testing the sample file on both machines I get the message suspended with the following error :
The published message could not be routed because no subscribers were found. This error occurs if the subscribing orchestration or send port has not been enlisted, or if some of the message properties necessary for subscription evaluation have not been
promoted. Please use the Biztalk Administration console to troubleshoot this failure.

Similar Messages

Agreement ( Contract) is not coming up in SAP (VA42)

Agreement ( Contract) is not coming up in SAP (VA42)...How to troubleshoot...

Agreement letter has been Archieved.

Oracle 11g database instance is not coming up

Hi,
I have installed Oracle DB 11g(11.2.0) on windows 2003 server.
everythig was running fine. Later according to my product requirement i turned ON the archive log and started running my product services which was creating more records to the database. During the process Database instance has gone down and its not coming up.
i had set the following parameter to trun on the archive log.
ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = 'C:\app\user\flash_recovery_area\BOOKTST';
ALTER SYSTEM SET DB_RECOVERY_FILE_DEST_SIZE = 2G;
ALTER SYSTEM SWITCH LOGFILE;
Please help me to solve this problem, oracle DB services and tnslistener are running successfully but the database instance is not coming up.
Thanks
Krishna

Hi,
probably archive log is causing the problem but i am new to archive log so not able to solve this.
Here are the content of alert_orcl.log file:
ARC1: Becoming the heartbeat ARCH
Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_ora_3104.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 100.00% used, and has 0 remaining bytes available.
Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_arc2_2124.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 100.00% used, and has 0 remaining bytes available.
You have following choices to free up space from recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
You have following choices to free up space from recovery area:
then consider changing RMAN ARCHIVELOG DELETION POLICY.
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
2. Back up files to tertiary device such as tape using RMAN
then consider changing RMAN ARCHIVELOG DELETION POLICY.
BACKUP RECOVERY AREA command.
2. Back up files to tertiary device such as tape using RMAN
3. Add disk space and increase db_recovery_file_dest_size parameter to
BACKUP RECOVERY AREA command.
reflect the new space.
3. Add disk space and increase db_recovery_file_dest_size parameter to
4. Delete unnecessary files using RMAN DELETE command. If an operating
reflect the new space.
system command was used to delete files, then use RMAN CROSSCHECK and
4. Delete unnecessary files using RMAN DELETE command. If an operating
DELETE EXPIRED commands.
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_ora_3104.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 47122432 bytes disk space from 2147483648 limit
ARCH: Error 19809 Creating archive log file to 'C:\APP\USER\FLASH_RECOVERY_AREA\BOOKTST\ORCL\ARCHIVELOG\2011_04_19\O1_MF_1_737_%U_.ARC'
Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_ora_3104.trc:
ORA-16038: log 2 sequence# 737 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: 'C:\APP\USER\ORADATA\ORCL\REDO02.LOG'
Errors in file c:\app\user\diag\rdbms\orcl\orcl\trace\orcl_arc2_2124.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 48109056 bytes disk space from 2147483648 limit
ARC2: Error 19809 Creating archive log file to 'C:\APP\USER\FLASH_RECOVERY_AREA\BOOKTST\ORCL\ARCHIVELOG\2011_04_19\O1_MF_1_739_%U_.ARC'
USER (ospid: 3104): terminating the instance due to error 16038
Tue Apr 19 13:14:28 2011
ARC3 started with pid=23, OS id=3748
Instance terminated by USER, pid = 3104
Thanks
Krishna

Schedule agreement print out not coming in ME9L

Hi,
I have created a schedule agrement in ME31L and after that I have created scheudle lines in ME38, NOW while taking printout in ME9L system is giving message as no suitable doucment found I have add message NEU i while creating agrementin ME31L
what can be the problem.
regards,
zafar

Hi,
you are right, there is no release documentation for LP, but you still have to create schedules in Me38 to get delivery schedules in ME9E.
Regarding ME9L , its the normal process as with any other purchase document , needs to be released if subjected to document release procedure.
Note : release documentation is not to be confused with document release procedure.
for more info on release documentation [http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee0f6755c811d189900000e8322d00/content.htm]
Regards
Edited by: Rajaneesh Marpalli on Aug 18, 2010 4:46 PM

Slave instance can not synchronized with the master for a long time

Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170     Number of PERM messages not acknowledged
9245     Number of messages queued due to network delay
172415     Number of messages discarded due to queue length
25880     Number of existing connections dropped
3407     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994     Next LSN to be used
0/0     Not waiting for any missed log records
328872/466092     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
2323     Number of duplicate log records received
0     Number of log records currently queued
6768     Maximum number of log records ever queued at once
55284     Total number of log records queued
120M     Number of log records received and appended to the log (120475988)
111     Number of log records missed and requested
2147M     Current master ID (2147483647)
2     Number of times the master has changed
0     Number of messages received with a bad generation number
8505306     Number of messages received and processed
12     Number of messages ignored due to pending recovery
471869     Number of failed message sends
12M     Number of messages sent (12959945)
0     Number of new site messages received
1     Number of environments believed to be in the replication group
990543     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup complete
6244678     Number of transactions applied
0     Number of startsync messages delayed
1     Number of elections held
1     Number of elections won
No election in progress
0.057097     Duration of last election (seconds)
8944103     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
5273M     Number of records added to a bulk buffer (5273592170)
10M     Number of bulk buffers sent (10490865)
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
slave db_stat:
0     Number of PERM messages not acknowledged
0     Number of messages queued due to network delay
0     Number of messages discarded due to queue length
1454     Number of existing connections dropped
0     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048     Next LSN expected
330433/2013808     LSN of first log record we have after missed log records
329543/5500501     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
5256M     Number of duplicate log records received (5256599432)
3925284     Number of log records currently queued
3925285     Maximum number of log records ever queued at once
4880561     Total number of log records queued
3578038     Number of log records received and appended to the log
1912297     Number of log records missed and requested
0     Current master ID
1     Number of times the master has changed
0     Number of messages received with a bad generation number
12M     Number of messages received and processed (12980442)
2     Number of messages ignored due to pending recovery
0     Number of failed message sends
1912307     Number of messages sent
0     Number of new site messages received
0     Number of environments believed to be in the replication group
0     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup incomplete
110568     Number of transactions applied
80     Number of startsync messages delayed
0     Number of elections held
0     Number of elections won
No election in progress
0     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
0     Number of records added to a bulk buffer
0     Number of bulk buffers sent
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55

Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike

Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding [and I'm at my wit's end!]

I originally posted this question to the community section and was advised to post it here. Please bear with me as this will be a long post. I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
taken and the results of several diagnostic tools and logs.
I have a Sony VAIOS VPCEBB33FM lap top since 2011. I have had this issue on an off for a long time. I'm at my wit's end. Any new insights or suggestions would be greatly appreciated.
Scenario Details
1) Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
2) I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
3) Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
4) Once in a while, the built-in wireless adapter is not found and I have to reinstall the driver. Also the diagnostic tool has had to reset my adapter on an increasing basis.
5) I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop. Even though I've been online on an infrequent basis it worked just fine for a while. Now that
I've been online a bit more I'm having the same issues again.
Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
1) Restarting my adapter
2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
3) Using the IP Config in Command Prompt
     ipconfig /flushdns
   ipconfig /registerdns
   ipconfig /release
     ipconfig /renew
4) Using the NetSh reset in Command Prompt and restarting my laptop
     netsh int ip reset c:\resetlog.txt
     netsh winsock reset
     ipconfig /flushdns
     [restart laptop]
5) Configuring the TCP/IP in several settings
    Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
    I have used the following settings:
       a) Obtain an DNS server address automatically
       b) OpenDNS
           208 67 222 222
           208 67 220 220
       c) Google DNS
           8 8 8 8
           8 8 4 4
6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014. It still did not resolve the issue. My laptop
manufacturer as not come up with an driver update for my adapter since 2010. I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
instead and frankly it didn't make much of a difference when I did it the first time.
7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
       Computer Browser [changed from manual to automatic]
       DHCP Client [already set to automatic]
       DNS Client [already set to automatic]
       Network Connections [already set to automatic]
       Network Location Awareness [changed from manual to automatic]
       Remote Procedure Call (RPC) [already set to automatic]
       Server [already set to automatic]
       TCP/IP Netbios helper [already set to automatic]
       Workstation [already set to automatic]
...and I'm still having DNS issues.
My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
Avast Anti-Virus with Microsoft Network Firewall. I've had DNS issues with both anti-virus/firewall set ups.
Below are the results from the diagnostics and tests that I've ran.
Windows Network Diagnostics
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
   Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
   Manufacturer . . . . . . . . . : Intel Corporation
   Provider . . . . . . . . . . . : Intel
   Version   . . . . . . . . . . . : 13.2.1.5
   Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
   Inf File Date . . . . . . . . . : Monday, June 14, 2010 9:05:44 AM
   Section Name . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
   Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
   Instance Status Flags . . . . . : 0x180200a
   Device Manager Status Code . . : 0
   IfType . . . . . . . . . . . . : 71
   Physical Media Type . . . . . . : 9
Informational Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2015-03-07 19:57:14-186
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 22 item(s) total, 22 item(s) displayed
        BSSID       BSS Type PHY   Signal(dB)   Chnl/freq    SSID
60-02-92-C6-D3-E8   Infra   <unknown>   -62       11   HOME-C7D4-2.4
60-02-92-A1-75-E0   Infra   <unknown>   -58       6   HOME-B917-2.4
00-1D-D5-D5-34-F0   Infra   <unknown>   -73       6   HOME-34F2
60-02-92-A1-75-E1   Infra   <unknown>   -58       6   (Unnamed Network)
06-1D-D5-D5-34-F0   Infra   <unknown>   -78       6   xfinitywifi
C4-27-95-C9-C4-2D   Infra   <unknown>   -57       1   HOME-C42D
02-1D-D5-D5-34-F0   Infra   <unknown>   -74       6   (Unnamed Network)
00-0D-97-07-E0-79   Infra   g   -75       6   (Unnamed Network)
00-1D-CF-2A-44-C0   Infra   <unknown>   -86       6   HOME-44C2
02-1D-CF-2A-44-C0   Infra   <unknown>   -86       6   (Unnamed Network)
F8-E4-FB-3C-87-A2   Infra   <unknown>   -89       6   YVNM7
06-1D-CF-2A-44-C0   Infra   <unknown>   -87       6   xfinitywifi
0C-F8-93-7A-13-50   Infra   b   -87       6   PKennedy
06-F8-93-7A-13-50   Infra   b   -89       6   xfinitywifi
02-F8-93-7A-13-50   Infra   b   -87       6   (Unnamed Network)
E0-88-5D-C8-A9-DC   Infra   <unknown>   -80       1   HOME-A9DC
E2-88-5D-C8-A9-DD   Infra   <unknown>   -79       1   (Unnamed Network)
16-CF-E2-43-0B-30   Infra   <unknown>   -88       1   xfinitywifi
60-02-92-F0-A8-C0   Infra   <unknown>   -90       11   HOME-96A6-2.4
60-02-92-C6-D3-E9   Infra   <unknown>   -63       11   (Unnamed Network)
02-1D-D4-EB-87-00   Infra   <unknown>   -88       11   (Unnamed Network)
06-1D-D4-EB-87-00   Infra   <unknown>   -88       11   xfinitywifi
Connection History
Information for Auto Configuration ID 1
List of visible networks: 13 item(s) total, 13 item(s) displayed
BSS Type PHY   Security   Signal(RSSI)   Compatible   SSID
Infra   <unknown>   Yes       63   Yes       HOME-C7D4-2.4
Infra   <unknown>   Yes       70   Yes       HOME-B917-2.4
Infra   <unknown>   Yes       43   Yes       HOME-34F2
Infra   <unknown>   Yes       70   Yes       (Unnamed Network)
Infra   <unknown>   No       40   Yes       xfinitywifi
Infra   <unknown>   Yes       71   Yes       HOME-C42D
Infra   g   No       43   Yes       (Unnamed Network)
Infra   <unknown>   Yes       28   Yes       HOME-44C2
Infra   <unknown>   Yes       20   Yes       YVNM7
Infra   b   Yes       21   Yes       PKennedy
Infra   <unknown>   Yes       33   Yes       HOME-A9DC
Infra   <unknown>   Yes       35   Yes       (Unnamed Network)
Infra   <unknown>   Yes       16   Yes       HOME-96A6-2.4
List of preferred networks: 3 item(s)
   Profile: xfinitywifi
    SSID: xfinitywifi
    SSID length: 11
    Connection mode: Infra
    Security: No
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: Yes
   Profile: HTC Portable Hotspot 9F50
    SSID: HTC Portable Hotspot 9F50
    SSID length: 25
    Connection mode: Infra
    Security: Yes
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: No
     Reason: 0x00028002
   Profile: belkin.332
    SSID: belkin.332
    SSID length: 10
    Connection mode: Infra
    Security: Yes
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: No
     Reason: 0x00028002
Information for Connection ID 1
Connection started at: 2015-03-07 19:57:14-186
Auto Configuration ID: 1
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Pre-Association and Association
   Connectivity settings provided by hardware manufacturer (IHV): No
   Security settings provided by hardware manufacturer (IHV): No
   Profile matches network requirements: Success
   Pre-association status: Success
   Association status: Success
    Last AP: 06-1d-d5-d5-34-f0
Security and Authentication
   Configured security type: Open
   Configured encryption type: None
   802.1X protocol: No
   Key exchange initiated: Yes
    Unicast key received: No
    Multicast key received: No
   Number of security packets received: 0
   Number of security packets sent: 0
   Security attempt status: Success
Connectivity
   Packet statistics
    Ndis Rx: 2068
    Ndis Tx: 2543
    Unicast decrypt success: 0
    Multicast decrypt success: 0
    Unicast decrypt failure: 0
    Multicast decrypt failure: 0
    Rx success: 3954
    Rx failure: 0
    Tx success: 537
    Tx failure: 4
    Tx retry: 2
    Tx multiple retry: 2
    Tx max lifetime exceeded: 0
    Tx ACK failure: 18
   Roaming history: 0 item(s)
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Result of diagnosis: There may be problem
Network Connection details from Command Prompt (some info hidden for security reasons)
Connection-specific DNS Suffix:
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
Physical Address: ‎00-23-15-54-19-B8
DHCP Enabled: Yes
IPv4 Address: 192.168.X.XX
IPv4 Subnet Mask: 255.255.XX.X
Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
Lease Expires: Saturday, March 07, 2015 8:24:44 PM
IPv4 Default Gateway: 192.168.X.X
IPv4 DHCP Server: 192.168.X.X
IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
IPv6 Default Gateway:
IPv6 DNS Server:
Results of Ping and Trace Route in Command Prompt
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping www.youtube.com
Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
Request timed out.
Request timed out.
Ping statistics for 173.194.121.6:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 19ms, Maximum = 24ms, Average = 21ms
C:\Windows\system32>ping 74.125.239.34
Pinging 74.125.239.34 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
Request timed out.
Ping statistics for 74.125.239.34:
    Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
    Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
C:\Windows\system32>ping www.hotmail.com
Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
Request timed out.
Request timed out.
Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
Ping statistics for 65.55.157.204:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 111ms, Maximum = 1537ms, Average = 824ms
C:\Windows\system32>ping 207.46.11.236
Pinging 207.46.11.236 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 207.46.11.236:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>tracert www.youtube.com
Tracing route to youtube-ui.l.google.com [173.194.121.5]
over a maximum of 30 hops:
1    19 ms    13 ms    17 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    13 ms    13 ms    27 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
3    20 ms    26 ms    21 ms he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
4    18 ms    34 ms    22 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5    19 ms    18 ms    18 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6    35 ms    18 ms    18 ms 209.85.249.217
7    21 ms    19 ms    19 ms 72.14.233.93
8     *        *        *     Request timed out.
9     *     2509 ms   677 ms iad23s25-in-f5.1e100.net [173.194.121.5]
Trace complete.
C:\Windows\system32>tracert 74.125.239.34
Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
over a maximum of 30 hops:
1    54 ms    23 ms    12 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    22 ms    19 ms    17 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    19 ms    19 ms    18 ms he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
4    18 ms    18 ms    18 ms he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
5    19 ms    18 ms    22 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6    22 ms    36 ms    19 ms 209.85.249.217
7    26 ms    23 ms    25 ms 209.85.143.112
8     *        *        *     Request timed out.
9     *        *        *     Request timed out.
10   972 ms     *        *     216.239.51.97
11   148 ms    97 ms    95 ms 216.239.46.241
12   324 ms   130 ms   432 ms 209.85.246.252
13     *        *        *     Request timed out.
14 1403 ms   101 ms   126 ms nuq04s19-in-f2.1e100.net [74.125.239.34]
Trace complete.
C:\Windows\system32>tracert www.hotmail.com
Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
over a maximum of 30 hops:
1    13 ms    13 ms    25 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    13 ms    15 ms    13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    20 ms    19 ms    17 ms he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
4    17 ms    20 ms    20 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5    17 ms    18 ms    38 ms as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
6    18 ms    18 ms    36 ms ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
7     *        *        *     Request timed out.
8     *     2191 ms    35 ms ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
9     *        *        *     Request timed out.
10     *        *        *     Request timed out.
11    86 ms    84 ms    84 ms ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
12    86 ms    86 ms    87 ms ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17    87 ms    84 ms    85 ms origin.by173w.bay173.mail.live.com [65.55.157.144]
Trace complete.
C:\Users\C.Cunningham>tracert 207.46.11.236
Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
over a maximum of 30 hops:
1    16 ms    16 ms    19 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    18 ms    13 ms    13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    21 ms    19 ms    21 ms he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
4    18 ms    21 ms    18 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5     *        *        *     Request timed out.
6     *        *        *     Request timed out.
7     *        *        *     Request timed out.
8     *        *        *     Request timed out.
9     *        *        *     Request timed out.
10     *        *        *     Request timed out.
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17     *        *        *     Request timed out.
18     *        *        *     Request timed out.
19     *        *        *     Request timed out.
20     *        *        *     Request timed out.
21     *        *        *     Request timed out.
22     *        *        *     Request timed out.
23     *        *        *     Request timed out.
24     *        *        *     Request timed out.
25     *        *        *     Request timed out.
26     *        *        *     Request timed out.
27     *        *        *     Request timed out.
28     *        *        *     Request timed out.
29     *        *        *     Request timed out.
30     *        *        *     Request timed out.
Trace complete.
Results of Intel WiFi Manual Diagnostics
Test Name                 Test Result   Test Summary
Hardware Test           Passed        Wireless Hardware is enabled
Driver Test           Passed        Diver is loaded. NETwNs64 Version 13.3.0.24
Radio Test                  Passed       Radio is ON
Scan Test                   Passed       There are 25 Networks available to connect
Association Test        Passed       Associated
Authentication Test   Passed       Authenticated
Signal Test                Passed       Signal Quality: Poor
Ping Test                  Failed          No Reponse: default gateway, DHCP server
I hope this information is enough to get to the root of this problem once and for all. Please let me know if you any other information such as event logs or statistics.
Thanks in advance.

Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
#Event Source Time
Error Severity    Domain
User      Description
45           EvtEngine
3/8/2015 20:40 Success
Connection         SYSTEM
iAMT - Failed to read Windows Events Log
46           S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Getting List of adapters.
47           S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Intel adapter(s) found.
156         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
157         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
158         S24EvMon
3/8/2015 20:47 Error
Driver    SYSTEM
AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
159         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
160         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
161         S24EvMon
3/8/2015 20:47 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
162         S24EvMon
3/8/2015 20:47 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -77
163         S24EvMon
3/8/2015 20:49 Information
TCP/IP SYSTEM
VoIP: Got link down - deleting flows .
164         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
165         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
166         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
167         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
168         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
169         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
170         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
171         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
172         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
173         S24EvMon
3/8/2015 20:49 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
174         S24EvMon
3/8/2015 20:49 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -81
175         S24EvMon
3/8/2015 20:50 Information
Driver    SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
176         S24EvMon
3/8/2015 20:50 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
177         S24EvMon
3/8/2015 20:50 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
178         S24EvMon
3/8/2015 20:50 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -80
179         S24EvMon
3/8/2015 21:03 Information
Driver    SYSTEM
RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
186         S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
187
S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31)

Updated Batch Characteristics on Order Release is not available in MSC3N

Hi All,
I have maintained the Class (023) and characteristics for Finished Material. When I am releasing the production order, I am assigning the values for batch characteristics (Custom defined characteristic) after that, If I go and see the corresponding batch in display mode (MSC3N) the value for the characteristic is not updated (entered value not available its blank).
u2022 Automatic batch creation for the production order during the order releasing is happening exactly as per the configuration but the entered value for the characteristic is not available for the corresponding batch in change as well as display mode (MSC2N/MSC3N)
Please guide to solve out this issue
Thanks in Advance

Hi Sanil,
Thanks for your speedy reply.
For me characteristics and all available as per the expectations but the updated value for the characteristcs on release is not sticking with the batch.
Please guide me to solve out this issue.
Thanks in Advance

Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

Hi Experts
I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
Please share.
Regards
Sandeep

Hi Ritesh
Thanks for your reply,
I checked both of these transaction we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
In PO VC configuration is called for class type-300 and in GRN VC configuration is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
yes we have activated Mill Functions in our ERP box.
Regards
Sandeep

[Forum FAQ] Troubleshooting error "The specified SQL server instance is not valid" when installing SCOM reporting service

Symptom
If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
“The specified SQL server instance is not valid”.
(Figure 1)
Figure 1.
Reason
This issue may be caused by multiple reasons, for example the reasons in Figure 1.
However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
to find the root reason:
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Later, you will find the error as below:
ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
(0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
--- End of inner exception stack trace ---;
Solution
According to the error message, you can delete encrypted content by following the steps below:
Open SQL Reporting Services Configuration Manager.
Select “Encryption Keys”.
Click “Delete” to delete all encrypted content. (Figure 2)
Figure 2.
After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
Figure 3.
In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
service logs to find the root reason.
Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
How to Install the Operations Manager Reporting Server
http://technet.microsoft.com/en-us/library/hh298611.aspx
Unable to install SCOM 2012 Reporting Services
http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

Proxy triggering in central instance but not in application

Hi friends,
There is one report which triggers the proxy. but this is not triggering in application servers and it is working fine when i trigger it in central instance.
In this case i am executing this report in background and at that time i can't check whether it is executing in central or application.
i need to do any configuration in application servers so that this error will not come..
And when i am updateing the sap tables by server proxy it is gettinng struck in queue and each time i need activate the queus.. if i need to execute this interface at nights this should not happen..
so for all these we need to do any settings..
Regards
Vijay

Hi,
>>And when i am updateing the sap tables by server proxy it is gettinng struck in queue and each time i need activate the queus.. if i need to execute this interface at nights this should not happen..
Make sure that You have cleared all the Strucked messages from the Queues before doing the bellow steps.
Goto SMQR and just Delete all the Queues.
Goto SXMB_ADMManage Queues-Just Say Register Queues Dont say Activate and all.
Now try to execute the scenario and this time it shld floe the message
REgards
Seshagiri

SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid

Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

Process instances do not show in BPEL Console

Hi all,
I have a BPEL, which reads a files from a particular folder if any, Process records in that file and then stores it in database.
I am facing a problem, my records gets processed, this BPEL works fine, as i can see the output in database, however associated instances are not shown in the BPEL Console. But if i restart the process (i.e. Switch OFF the process and Again Switch ON) it shows me all the previous instances and also the current instances. But sometime again this problem occurs.
Has anyone faced the same issue? Please let me know in case anyone has solution.
Thanks in advance.

[http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf|http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf] I found below in SOA best practices guide:
Why Does the Instance of an Invoked Process Not Display in Oracle BPEL Control?
If the process invoked is asynchronous, the message headers and payload are stored in
the invoke_message table. The invocation message is then processed by a
background thread to create an asynchronous BPEL process instance. If an error is
encountered while processing the invocation message, the transaction is rolled back
and the invoke message remains in its unhandled state in the invoke_message table.
See "How Does an Invoke Message and Activity Display in the Manual Recovery
Page?" on page 1-18 for more details on this scenario.
If the process invoked is synchronous, the cause for the missing instance is likely a
transaction rollback. The reasons for a transaction rollback are as follows:
■ Third party manipulation of the JTA transaction. As described in "How Do I Force
a Rollback in a BPEL Flow?" on page 1-5, a failed database adapter invocation can
cause the TopLink layer to mark the JTA transaction for rollback. Because Oracle
BPEL Server relies on the JTA transaction for persistence (not just as a signaling
mechanism between transaction-aware modules), any changes to the status of the
transaction impact Oracle BPEL Server’s ability to dehydrate the instance.
■ Transaction timeout. The synchronous process may be invoking one or more
backend synchronous services; the total time of all the backend calls may exceed
the timeout value for the transaction. See "How Do I Modify Transaction Timeout
Settings for Oracle BPEL Server?" on page 1-9 for details on how to increase the
transaction timeout value.
■ Failure to dehydrate the synchronous instance to the database. If the
completionPersistPolicy is set to on, the instance attempts to save itself
before returning to the caller. Typically, errors are encountered during this step if
the database connection has been severed or the tablespace is full. Some customers
Transactions
Oracle BPEL Process Manager 1-9
have encountered problems with saving the audit trail of the instance. For
example, there are problems with JDBC batching in 10.1.3.1.0 that the audit trail
persistence code uses. When a synchronous invocation does not result in an
instance visible from Oracle BPEL Control (assuming that
completionPersistPolicy is set to a value of on, deferred, or faulted),
use the following steps to find the underlying error:
– Enable all loggers to debug mode.
– Resubmit the invocation message.
– Check the Oracle Process Manager and Notification Server (OPMN) or
command-line log for the underlying exception stack trace.
Please refer to link below:
http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf

Fax line used for outgoing calls when incomming fax not coming in?

So is there a way to do this? Can I route the 1 FXO to FXS for incomming calls (and plug fax into FXS) or something like this and then use that line as an outgoing line when not in use?
I don't need step but steps but the basics of how something like this could be configured would be awesome!!!

I'm not sure if I understand. I set this up, so I understand phone systems enough to do this, but I don't really don't know the terminoligy.
Let me back up.
Currently our business has 2 lines and a fax line. Right now the two lines are plugged into 2 FXO ports and the fax line is just plugged into the fax machine--not the UC320. We're in mixed mode, not pbx specifically. We get one or two faxes a day and we send two or 3 faxes a day. We'd like to be able to use the fax line for outgoing calls when it's not being used for fax.
So I need to be able to control the in and the out of the fax line. I need all incomming calls for the fax number routed to what I assume would be the FXS port (with the fax machine plugged into the FXS port), and none of the other lines routed in this way (the other lines would go to the attendant).
Then I need if we send a fax, we need for when the fax machine opens the line for it to automatically be routed to the fax line. Then the fax machine can dial and send faxes. I think we send few enough faxes that we're not too worried about what happens if we try to send a fax and the phone is busy, but it would be nice to be able to look at a phone and tell if the fax line is in use.
I don't really care if the Fax line is part of a shaed FXO, it can be a seperate choice on the phone for making outgoing calls (one of the buttons next to the screen or something).
Is all this possible? Is it only possible in PBX style or is mixed ok?

Java is not coming up because of wrong port configuration

Hello guys
It is a ABAP+ JAVA system ,ABAP is system is up but java is not coming up because of wrong port configuration.
getting error as ....service could not start because of missing or wrong port configuration
also tell me how to change this parameter in configtool??
com.sap.aii.connect.integrationserver.r3.mshost

Hi,
Please attach std_server0.out file too. Also, on the Abap side, ensure the HTTP port is set. This can checked by tcode smicm->Goto-> Services. The HTTP entry must be enabled and the port number should be displayed.
If it isnt enabled, then activate the http port in the instance profile using RZ10 Tcode.
Also, AFAIK, the parameter com.sap.aii.connect.integrationserver.r3.mshost is maintained in the exchange profile.
Rgds,
Soujanya

"Cascading job name set but the instance is not set." errors

I noticed the "Cascading job name set but the instance is not set." errors in the server log after upgrade to Hudson 3.3.0. I must reset the Cascading Job to fix the problems. Probably the job configurations were broken before the upgrade, but I am not sure why they have got broken.

I noticed the "Cascading job name set but the instance is not set." errors in the server log after upgrade to Hudson 3.3.0. I must reset the Cascading Job to fix the problems. Probably the job configurations were broken before the upgrade, but I am not sure why they have got broken.

Configuring an Outgoing Batch in an agreement - Instance ID not coming back

Similar Messages

Maybe you are looking for