Configuring as "Adjunct" to any end point how it consume less DLUs, How it works..

configuring as “Adjunct” to any end point how it consume less DLUs, How it works..
kindly explain..

Hi Hemant,
what I suppose the adjunct licensing would have been designed in such a way that secondary devices like CIPC when used along with Cisco IP phone which is configured as a primary device, would consume less DLU.
regds,
aman

Similar Messages

  • As a end user how to work in a " Training & Event Management Module'"

    Dear Gurus,
    As a end user how to work in a " Training & Event Management Module'"
    Please advised
    Regards
    MHPO

    Dear MHP,
                     there are lots of things you can do as an end user in TEM.   You could create new events (not events types), book peoples, fix the date of the event, then create califications of the event (about the event or about the atendee).  Please, read sap help issues:  (in Training and Event Management)  day-to-day activities, Recurring Activities and Reporting.
    I hope this help you.
    Santiago

  • Can any body tell how RSGEN works

    Can any body tell how RSGEN works and where it stores the generated code and where the path is maintained.
    Regards
    Mave

    Ya I am sorry I mean SGEN , my  problem is I had ran that SGEN but each time I restart my system and access any TCODE the system starts compiling its happeneing every time I restart. What I suppose my system cannot able to locate the generated loads of ABAP sources .
    How the system actually recognize the generated loads from the tablespace somewhere may be tablespace path is defined ?
    OR suggest any alternative.
    Regards
    Mithun

  • I created a movie in elements 11, now the cti will not stop at end point, how to fix this?

    I created a movie and now the CTI will not stop at end point. How to fix this?

    Timeline too long (orphans) http://forums.adobe.com/thread/652216?tstart=30

  • Any idea on How to work SAP retractors for CCA,PS, PCA

    Hi guys...
    I need to work on the SAP retractors .. Do any one have documentation or methods?.
    Thanks in advance
    regards
    AK

    Hi Diogo,
    Thanks for the answers. I am bit confident to work on. Will try to find more from forums also..
    If anything will post again with my findings and issues.
    Thanks again...
    Regards
    AK

  • Apple TV 2nd gen, the picture is oversized as if the TV is in zoom mode. The Tv picture is fine, it only happens when the apple TV is on. Any suggestions on how to work this out?

    The picture on my Apple TV display is oversized as in zoom mode. Not a TV setup problem, does anybody know how to correct this? I have tried resetting several times already.

    Welcome to the Apple Community.
    There are TV settings that can cause this, unfortunately I forget what they are, take a look in your TV manual as they may be called different things from manufacturer to manufacturer.
    Additionally, check and confirm your TV supports 720p, some HDTV's don't. Finally, you are connected by HDMI I assume.

  • Configuring End Point in CE

    Hi Experts,
            Can i know how to configure End point alais in CE. I need to work on external service callable object in which i need to provide the End point. I was not able to find the same in Administration like GP CAF environment.
    Thanks
    Gopal.

    Hi, You can create end points in the NWA.
    SOA Management->Technical Configuration->Destination template management.

  • Can any help on how to configure ALE & EDI

    HI,
    THIS IS SRINIVAS. I AM GETTING PROBLEM IN CONFIGURING EDI. CAN ANY ONE SUGGEST HOW TO PROCEED IN THIS REGARD.
    SRINIVAS.

    Hai Sreenivasulu
    Check the following Settings
    ALE IDOC
    Sending System(Outbound ALE Process)
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode  BD64 ? Create Model View
    Tcode  BD82 ? Generate partner Profiles & Create Ports
    Tcode  BD64 ? Distribute the Model view
    Message Type MATMAS
    Tcode BD10 ? Send Material Data
    Tcode WE05 ? Idoc List for watching any Errors
    Receiving System(Inbound ALE )
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ? Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 ? Idoc List for inbound status codes
    ALE IDOC Steps
    Sending System(Outbound ALE Process)
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Create Model View
    Tcode BD82 !V Generate partner Profiles & Create Ports
    Tcode BD64 !V Distribute the Model view
    This is Receiving system Settings
    Receiving System(Inbound ALE )
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 !V Idoc List for inbound status codes
    Message Type MATMAS
    Tcode BD10 !V Send Material Data
    Tcode WE05 !V Idoc List for watching any Errors
    1)a Goto Tcode SALE
    Click on Sending & Receiving Systems-->Select Logical Systems
    Here Define Logical Systems---> Click on Execute Button
    go for new entries
    1) System Name : ERP000
    Description : Sending System
    2) System Name : ERP800
    Description : Receiving System
    press Enter & Save
    it will ask Request
    if you want new request create new Request orpress continue for transfering the objects
    B) goto Tcode SALE
    Select Assign Client to Logical Systems-->Execute
    000--> Double click on this
    Give the following Information
    Client : ERP 000
    City :
    Logical System
    Currency
    Client role
    Save this Data
    Step 2) For RFC Creation
    Goto Tcode SM59-->Select R/3 Connects
    Click on Create Button
    RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
    give the information for required fields
    RFC Destination : ERP800
    Connection type: 3
    Description
    Target Host : ERP000
    System No:000
    lan : EN
    Client : 800
    User : Login User Name
    Password:
    save this & Test it & RemortLogin
    3)
    Goto Tcode BD64 -- click on Change mode button
    click on create moduleview
    short text : xxxxxxxxxxxxxx
    Technical Neme : MODEL_ALV
    save this & Press ok
    select your just created modelview Name :'MODEL_ALV'.
    goto add message type
    Model Name : MODEL_ALV
    sender : ERP000
    Receiver : ERP800
    Message type :MATMAS
    save & Press Enter
    4) Goto Tcode BD82
    Give Model View : MODEL_ALV
    Partner system : ERP800
    execute this by press F8 Button
    it will gives you sending system port No :A000000015(Like)
    5) Goto Tcode BD64
    seelct the modelview
    goto >edit>modelview-->distribute
    press ok & Press enter
    6)goto Tcode : BD10 for Material sending
    Material : mat_001
    Message Type : MATMAS
    Logical System : ERP800
    and Execute
    7)goto Tcode : BD11 for Material Receiving
    Material : mat_001
    Message Type : MATMAS
    and Execute --> 1 request idoc created for message type Matmas
    press enter
    Here Master Idoc set for Messge type MATMAS-->press Enter
    1 Communication Idoc generated for Message Type
    this is your IDOC
    Change Pointers
    I know how to change the description of a material using ALE Change Pointers.
    I will give the following few steps
    1) Tcode BD61---> check the change pointers activated check box
            save and goback.
    2) Tcode BD50--->  check the MATMAS check box save and comeback.
    3) Tcode BD51--->  goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
    4) Tcode BD52--->  give message type : matmas press ok button.
       select all  what ever you want and delete remaining fields.
       save & come back.
    5) 5) go to Tcode MM02 select one material and try to change the description and save it
       it will effects the target systems material desciption will also changes
    6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
       give Message type : MATMAS and Executte
    ALE/IDOC Status Codes/Messages
    01 Error --> Idoc Added
    30 Error --> Idoc ready for dispatch(ALE Service)
    then goto SE38 --> Execute the Program RBDMIDOC
    29 Error --> ALE Service Layer
    then goto SE38 --> Execute the Program RSEOUT00
    03 Error --> Data Passed to Port ok
    then goto SE38 --> Execute the Program RBDMOIND
    12 Error --> Dispatch ok
    Inbound Status Codes
    50 Error --> It will go for ALE Service Layer
    56 Error --> Idoc with Errors added
    51 Error --> Application Document not posted
    65 Error --> Error in ALE Service Layer
    for 51 or 56 Errors do the following steps
    goto WE19 > give the IDOC Number and Execute>
    Press on Inbound function Module
    for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
    IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    IDOCS
    http://www.sappro.com/downloads/OneClientDistribution.pdf
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    Thanks & regards
    Sreenivasulu P

  • How to work with 360 video?

    I am new to AE and am trying to work with a 360 equirectangular video I shot with a Freedom 360 and 6 go pros.
    Are there any tutorials on how to work with 360 spherical videos? Do I need to download additional plugins?
    Thank you,
    Phil

    Phil,
    Of course, the image needs to be big for this, but the plugin you would use is CC Sphere.
    Drop your movie into a composition and apply CC Sphere to the video.
    Then set the Render option in the effect to "Inside".
    Under Shading set Ambient to 100% and Diffuse to 0%.
    Then scale inside the effect until the image fills the screen.
    Then you'll be able to use the Rotate Y controls in CC Sphere to spin around inside your video!
    You can also add Optics Compensation and Reverse the Lens Distortion to straighten out your image.
    Let me know if you have any questions!
    Trent

  • How do emulate multiple calls to same end point in Composite Test Suite

    Can any one help with a problem I face with a composite test suite? I have a composite that has 5 main activities and after each activity it logs a status in a business database. This uses the same end point each time to log a status just passing a different status at each point.
    When I create a test in the SOA Suite test suite I can create an Assertion for the first status call to check that the status us being created correctly but the second time the end point gets called the status is different and therefore the overall test fails.
    Does anyone know how I can create multiple assertions in a test for the same end point in the same test?

    Hi battlFrog,
    >>I want to change the end point address to this service that is now in the solution, but not sure what the address would be.
    What do you mean about the above message? I wonder if you want to let the client to reference to the service which is now in the solution, but not pointing to a service on your test server. If so, first please try to make sure that service
    which is now in the solution can work well. After that please try to use the "Add Services Reference" to help you reference the service which is now in the solution. Once it finishes, you can get the correct endpoint address in your client config
    file. 
    Besides, if your service is a self-host application, you can change the service address in the service side by modifying the baseaddress, if your service host in the IIS, you can modify the service address by doing some IIS configuration.
    If I have misunderstood you, please feel free to let me know. 
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • End point configuration

    Hi Experts,
    I am facing a situation in which i have a WSDL from a non sap system with server(from which this wsdl is coming) host name say "xyz". I am trying to consume this service in WD JAVA.
    Now this server host name("xyz") is a part of URL of the WSDL. Is there any way i can configure the end points for this service so that in case if we change the server name or server ip, say from "xyz" to "abc", we dont have to made any changes in our coding. May be some configuration some where.
    It will be really helpful if anyone can provide me with a optimum solution.
    Regards
    Pranav

    Hi Pranav,
    I see. OK, then here it is in short how it would work with Service Groups.
    At design-time:
    1. When you import the service in order to create the Adaptive WD Web Service Model (doesn't matter from where, e.g. you can also use WSDL URL), on one of the steps of the wizard, you have to choose a service group - let's say you create a new service group "NonSAPServices"
    2. You develop your application, build and deploy it
    At configuration-time in NWA:
    1. First you have to create a provider system connection - here you specify the concrete WSDL URL that is to be used at runtime. If your host changes, the only thing you have to do is to change the URL here. You might also need to specify here a user/pass for the WSDL if it is protected.
    2. In case you want to authenticate to the non-SAP service with a technical service user, i.e. all calls will be made on behalf of that user, you have to create a User Account and assign it to the provider you have created in step1
    3. Assign the provider system to the service group in Application Communication.
    More information you can find here: [The New SOA Configuration Approach|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3]
    Ciao, Alexander

  • How osb handle end point offline for long time

    Hi all,
    In my project, the messages will be sent real time to distributed client, each client is only have one end point, so there is no load balancing could be applied. I already set the retry count, iteration interval and also offline endpoint URIs setting. Will it sufficient, in case the client hang or offline in long time, 2 hours or longer?
    How osb keep the message, will the frequent retry process causing performance issue?
    Any suggestion for proper configuration in this case?
    Really thanks in advanced.
    Regards,
    Mr.K

    only have one end point, so there is no load balancing could be applied. I already set the retry count, iteration interval and also offline endpoint URIs settingYes rety retry count is efficient when the interval are low..2 hrs or longer is little longer for stateless routing which OSB does.
    How osb keep the message, will the frequent retry process causing performance issue?Yes. I guess... OSB will be doing some thing like RequestThread.sleep(...).Again this will be transport to transport related
    Any suggestion for proper configuration in this case?Using such long intervals might not scale up
    Manoj
    Edited by: Manoj Neelapu on May 19, 2010 4:02 PM

  • Is there any way to achieve dynamic end point in SOA 11g (non-AIA process)

    Hi,
    We are using SOA Suite 11.1.1.5.0 and we are not using AIA product..Is there any mechanism to achieve dynamic end point?If so can you please tell me how we can achieve this.
    Thanks in advance.

    Hi All,
    We can achieve dynamic end point in oracle soa suite 11g
    Check the below link
    https://blogs.oracle.com/ateamsoab2b/entry/invoking_web_services_dynamically_in
    regards
    Shankari

  • How to download ws end point

    Hi,
    Is there any way to download endpoint urls of all the services deployed in bpel? my aim is to use ant to get the end point urls from a domain.
    I'd appreciate it if anyone can tell me bout any documentation out there that gives info on how to do this.
    Thank you,
    Revanth

    BPEL server supports WSIL. If you have a WSIL browser (such as the one available in JDev when you add partner links) you can view all the deployed processes and get their WSDL descriptions. If you want to do this programmatically you may have to implement some sort of WSIL client.

  • HT1766 At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    See:
    iOS: Troubleshooting backup issues in iTunes
    Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one.

Maybe you are looking for