Configuring BI on Existing ECC 6.0 System

Hi All,
We have an ECC6.0 system and currently there is a requirement to configure BI, can any one
share the experience of doing it. I think we need to Install the BI_CONT addin and are there any
taks involved after it?
Regards,
Ershad Ahmed

it is technically possible to use BW from within an ECC 6.0 instance. You need to install BI_CONT 704 to use SAP contents.
But, I personally do not recommend this scenarios. SAP and Oracle parameters are usually set differently based on its usage. SAP recommends different parameters for BW and R/3. so, it's better to use these usages in different systems.

Similar Messages

Configuring BI in existing ECC 6.0

Hi All,
We have an ECC6.0 system and currently there is a requirement to configure BI, can any one
share the experience of doing it.
Regards,
Ershad Ahmed

Update your office 2003 vertion or install 2007
for office 2003 vertion update next patch level by using below links
http://www.microsoft.com/downloads/details.aspx?FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670&displaylang=en
If this above does not work
http://www.microsoft.com/downloadS/details.aspx?FamilyID=e9d87f37-2adc-4c32-95b3-b5e3a21bab2c&displaylang=en

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

How to check verison of Best Practice Baseline in existing ECC system?

Hi Expert,
How to check verison of Best Practice Baseline in existing ECC system such as v1.603 or v1.604?
Any help will be appriciate.
Sayan

Dear,
Please go to https://websmp201.sap-ag.de/bestpractices and click on Baseline packages then on right hand side you will see that On which release is SAP Best Practices Baseline package which version is applicable.
If you are on EHP4 then you can use the v1.604.
How to Get SAP Best Practices Data Files for Installation (pdf, 278 KB) please refer this link,
https://websmp201.sap-ag.de/~sapidb/011000358700000421882008E.pdf
Hope it will help you.
Regards,
R.Brahmankar

Error when configuring ECC 6.0 system as application server

Hi guys,
I'm new to SDN.
I am having a problem configuring an ECC 6.0 system as an application system. It is correct in the SLD and it is updating the SLD with its information. It is setup as a business system with the correct Integration server. When I go to configure the integration engine I select global configuration and select pull data from SLD. I then get a message stating that the SLD is unavailable at this time. Any ideas? SLDCHECK works fine and comes back with the business system of the application system with no problems.

hi
check whether the TECHNICAL and BUSINESS systems are registered properly or not.
check the role of the business system created.
The status of the SLD data supplier bridge should be running,else start the data collection again.(RZ70: SLD LOCAL ADMIN)
regards
kummari
Edited by: kummari on Oct 29, 2008 5:31 AM

Configuring mail priority when sending mails via SMTP from ECC 6.0 system

hi all,
we have the problem, that mails which we send via SMTP out of ECC 6.0 system
reach our SMTP server with very low priority. So the server usualy send them in the evening.
Is there a possibility to configure global priority for mails?
best regards
Davor

Goto SCOT transaction, double click on STMP you will find the option
Maximum waiting time for repeat send attempt procedure:
Hours/minutes / 30. define the time over there.
II option execute the job- start send process,
Regards,
Mahesh

Is it possible to migrate data from a 4.6C system to an ECC 6.0 system?

Hello all,
We have an ECC6.0/Oracle 11g system which runs Finance, Purchasing and Payroll/HR for our own organisation.
We also have another 4.6C/Oracle9 system where we run only Payroll for another organisation.
This is a separate landscape (Dev / Test / Prod / DR) which runs on its own hardware.
Clearly, this 4.6C system has to be upgraded in the next 12 months or so before it is out of maintenance.
However, we are exploring whether it would be possible to migrate the data from the 4.6C system to our existing ECC6.0 system instead of upgrading the 4.6C system.
In this way, we can decommission the 4.6C hardware and simplify our landscape.
Has anyone undertaken a similar exercise who would be willing to share their experiences?
Or does anyone have any opinions as to whether this would even be possible?
Our initial thinking is that we would probably have to write our own conversion programs and/or possibly use LSMW but it's early days so any feedback is welcome.
Regards...John

Hi,
However, we are exploring whether it would be possible to migrate the data from the 4.6C system to our existing ECC6.0 system instead of upgrading the 4.6C system.
You can make of ALE/IDOCs technology to transfer the required data from 4.6C system to ECC 6.0 system. Here you will need to perform necessary mapping of the fields and perform required technical configuration. Later write ABAP codes to fetch and transfer data .
Hope this answers your query.
Regards,
Deepak Kori

The Web template does not exist in the master system

We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?

Make sure the template exists in the system which is configured in the iView property.
There should be a one to one mapping between BI and EP systems.
You cannot connect 2 BI system to one EP system and configure BI JAVA

Error: ORA-16532: Data Guard broker configuration does not exist

Hi there folks. Hope everyone is having a nice weekend.
Anyways, we have a 10.2.0.4 rac primary and a 10.2.0.4 standby physical standby. We recently did a switchover and the dgbroker files automatically got created in the Oracle_home/dbs location of the primary. Now need to move these files to the common ASM DG. For this, I followd the steps from this doc:
How To Move Dataguard Broker Configuration File On ASM Filesystem (Doc ID 839794.1)
The only exception to this case is that I have to do this on a Primary and not a standby so I am disabling and enabling the Primary(and not standby as mentioned in below steps)
To rename the broker configuration files in STANDBY to FRA/MYSTD/broker1.dat and FRA/MYSTD/broker2.dat, Follow the below steps
1. Disable the standby database from within the broker configuration
DGMGRL> disable database MYSTD;
2. Stop the broker on the standby
SQL> alter system set dg_broker_start = FALSE;
3. Set the dg_broker_config_file1 & 2 parameters on the standby to the appropriate location required.
SQL> alter system set dg_broker_config_file1 = '+FRA/MYSTD/broker1.dat';
SQL> alter system set dg_broker_config_file2 = '+FRA/MYSTD/broker2.dat'
4. Restart the broker on the standby
SQL> alter system set dg_broker_start = TRUE
5. From the primary, enable the standby
DGMGRL> enable database MYSTD;
6. Broker configuration files will be created in the new ASM location.
I did so but when I try to enable the Primary back I get this:
Error: ORA-16532: Data Guard broker configuration does not exist
Configuration details cannot be determined by DGMGRL
Form this link,(Errors setting up DataGuard Broker it would seem that I would need to recreate the configuration....Is that correct ? If yes then how come Metalink is missing this info of recreating the configuration... OR is it that that scenario wouldnt be applicable in my case ?
Thanks for your help.

Yes I can confirm from the gv$spparameter view that the changes are effective for all 3 instances. From the alert log the alter system didnt throw u pany errros. I didnt restart the instances though since I dont have the approvals yet. But I dont think thats required.

Asset Accounting in Upgrade from 4.5B to ECC 6.0 system.

Hello
We have recently upgraded from 4.5B system to ECC 6.0 system.This is a Technical Upgrade.
We are getting errors when we post through transaction ASKB-Periodic Asset Posting.
The errors are that Documents cannot be posted as the GL Account for the Depreciation area 20-Cost Depreciation is a Reconciliation account and cannot be posted directly.
Could you please let me know the steps to be taken to ensure that the Asset Accounting is implemented correctly?
Any help in this regard is highly appreciated.
Awaiting your response!!
Regards
Shrutika

Hi Shrutika
It appears as is if there is some issue with the configuration of your GL / configuration of GL with AA. Please refer to the following [link|https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting] on this site. This provides you excellent stuff on Asset Accounting.
Regards
Virendra Malik

Can't save the configuration of an existing track

Hi,
i have created a track before define a product,sc... and it OK. i know it's wrong step, so after defined a product,sc and etc follow the NWDI Configuration document, i try to delete(modified to save) the existing track,The following error message is displayed:
Unexpected error; inform your system administrator: <null>
I got a solution in SAP notes as following:
The following error message is displayed when you save the configuration of an existing track:
Unexpected error;inform your system administrator: For input string: " "
Other terms
Data conversion, NWDI, CMS, Change Management Service
Reason and Prerequisites
" " default values for new fields in CMS were inadvertently delivered for new fields in CMS.
Solution
Execute the following SQL statements on the database of your J2EE application server:
UPDATE cms_cdevconf SET DTCVERSION = null WHERE DTCVERSION = ' '
UPDATE cms_cdevconf SET DTCPATH = null WHERE DTCPATH = ' '
The problem has only occurred previously on ORACLE.
I executed the sql sentence through VA, but it's not work.
Any input is thoroughly appreciated.
With Regards,
Lin

Someone?
Any help is appreciation...
Regards, Lin
Edited by: BingLin Zhong on Sep 2, 2008 4:46 AM

Run As Account does not exist on the target system or does not have enough permissions

We are getting below alerts,
Run As Account does not exist on the target system or does not have enough permissions.
I know we can create a Run As account with low Privilege can fix this issue ,
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
My question here is there is any other way to fix it. I tried giving below permission for scom_act account (we used for agent installation and has local admin rights) but still same issue and
also i tried with sysadmin access for scom_act as well but no luck still having same issue , any solution would be welcome
The min. Privilege for monitor SQL server
DB Server Level
a. VIEW ANY DEFINITION
b. VIEW SERVER STATE
c. VIEW ANY DATABASE
Each DB
a. SQLAgentReaderRole database role.
b. PolicyAdministratorRole database role

Check below link
http://blog.coretech.dk/msk/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

How to connect one ECC 6.0 system to two BW ssytems.

Hello all,
I am trying to connect one ECC 6.0 systems to two different BW systems. The BW systems have two different logic names.
I tried to find an answer in the threads , but could not able to find the steps. they were talking about the notes which fixes for the deltas. but I am not even able to connect the systems at all to implement that notes.
Please give me the steps how to connect to an another BW2 system. The connection between ECC and BW1 ia working fine.
Thanks,

The error message is .
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system LOGTST100 does not accept any of the proposed values.
The last proposed value was BB.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely BB, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.

Transfer class and characteristics data from 3.1i system to ECC 6.0 system

I have to develop a program to transfer all the classes and characteristics( tcode cl01 and ct04) in a 3.1i system to an ECC 6.0 system.
I initially planned to use FMs BAPI_CLASS_GETDETAIL to read from 3.1i and BAPI_CLASS_CREATE to load in ECC 6.0.
But then I realized that BAPI_CLASS_GETDETAIL does not exist in 3.1i system.
Could anyone please tell me how to transfer the class and characteristics data from 3.1i to ECC 6.0. What approach and FMs are to be used.
Thanks,
Karthik

Thanks for the reply Madhu.
We are trying the ALE way, using BD91 and BD92. This way seems to be easier as there is no need to extract data to files.
IDoc is successfuly sent from the 3.1i system but we are not able to see it in ECC 6.0 system.
We are checking up the settings.
Would be very useful if you can provide some more details about the settings to be done.
Thanks,
Karthik

BDLS t-code Doubt after copying existing ECC to the new ECC

Hi,
We are creating a new ECC client by copying other already exist ECC Client with SAP_ALL Profile. Both are at ECC 6.0. Source and Destination ECC have Development and Demo Server respectively.
Old ECC Client : ECDCLNT801
New ECC Client : PHDCLNT902 (Created by copying ECDCLNT801 with SAP_ALL Profile)
After Creation of Client , We run two BDLS t-code in PHDCLNT902.
Source : ECDCLNT801 and Target : PHDCLNT902 (On selecting Client Dependent and Independent Tables)
After done this I am getting the same GUID no in CRMPRLS table for both ECCs.
Is it fine having same GUID no. for PHDCLNT902 and ECDCLNT801 in CRMPRLS table as mentioned PHD 902 is the copy of ECD 801 with SAP_ALL profile , so the GUID should have different or the same?
Or have to delete that entry from PHD 902 and again need to re run *BDLS * to get the new GUID at PHD 902?
Kindly correct me, will give points.
Regards,
Pawan Keshwani

Hello Pawan,
Have a look at OSS notes below:
588701 - Change of the logical system name in R/3 Backend system
765018 - Problems with logical system during data exchange.
It will solve your problem.
Regards.
Laurent.

Configuring BI on Existing ECC 6.0 System

Similar Messages

Maybe you are looking for