Configuring BPM with the UWL

Hello Experts,
I need to set up an Universal Work List on EP server to list all the Tasks and Process including BPM based ones...
Part of Landscape is; we have an SRM Portal Working on SRM ECC, a BPM server (Which is my side basicly) and an EP Portal Server.
Basic scenario is; Customer will logon to EP server(single sign-on with other systems), will fill up the shopping cart(SRM) and depending on the total price diffirent approval processes (BPM) and after approval the process will continue..
Approvers also will use EP server to complete theirs tasks which were triggered from BPM.
So, how am i going to configure EP UWL to show tasks from BPM, i have been through this link; http://help.sap.com/saphelp_nwce72/helpdata/en/0e/57827af0e34edfacd4c82edeb6acca/content.htm
But my question is; on the consumer part (which is EP) how am i going to connect to BPM (as a Portal server) from EP? It only decribes the connection as a R3 system but BPM is only a java portal system. I couldn't manage to connect from EP to BPM, is there any way to connect from portal system to portal system or is there any other way achieve this ?
Any suggestion will be appreciated.
Thanks,
Yasin

Dear soujanya,
I have implemented federated network between to servers (BPM and EP).
Can you guide me through UWL Configuration ? I have tried this link;
http://help.sap.com/saphelp_ep60sp2/helpdata/en/ff/83fd4d5a644336b13ae54528cfef57/content.htm
but it seemed Business workflow on ECC systems included here, but i just need to export bpm workflows to ep uwl at the moment.
Any suggestions ?
Thanks again,

Similar Messages

Configuring ODI with the IBM db2

Hi all,
I am new to this technology.I want to configure my IBM db2 data base with oracle data integrator.I have installeled IBM db2 & ODI on my machine.I am trying to create repositories but how to do it for IBM db2.
My task is..
1)creating the repository for IBM db2.
2)Configuring it with ODI
3)Exporting the dump data to IBM db2 database
Thanks in advance.

Hi Cezar,
Thanx again for ur reply...
I have done as you said but still getting error as "Connection Failed" as follows
*com.ibm.db2.jcc.am.yn: [jcc][t4][2043][11550][3.57.82] Exception java.net.ConnectException: Error opening socket to server localhost/127.0.0.1 on port 50,000 with message: Connection refused: connect. ERRORCODE=-4499, SQLSTATE=08001*
Regards,
Mandar

OIM is not able to Restart the Domain when I am trying to configure it with the Config.sh

Hi,
I am a newbee here. Below is the complete details about my problem:
I have installed WLS1211 (64-Bit) on OEL 6.3 OS & also installed the OIM 11.1.1.7 (64-Bit) on the same machine.
When I am trying to configure the OIM (using config.sh file), system fails to restart the domain & in turn fails the configuration. I navigated to the domain created for OIM and verified that log file displays following error:
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Server> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676195> <BEA-002609> <Channel Service initialized.>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676216> <BEA-000415> <System has file descriptor limits of soft: 65,536, hard: 65,536>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676218> <BEA-000416> <Using effective file descriptor limit of: 65,536 open sockets and files.>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676218> <BEA-000406> <PosixSocketMuxer was built on Apr 24 2007 16:05:00>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676238> <BEA-000436> <Allocating 3 reader threads.>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <Socket> <blr2211427> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676238> <BEA-000446> <Native I/O enabled.>
####<Sep 6, 2013 7:41:16 PM IST> <Info> <IIOP> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476676483> <BEA-002014> <IIOP subsystem enabled.>
####<Sep 6, 2013 7:41:20 PM IST> <Error> <Security> <blr2211427> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1378476680681> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
####<Sep 6, 2013 7:41:20 PM IST> <Critical> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680682> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:148)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
    at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:170)
    at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
    at java.lang.Class.newInstance(Class.java:374)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:148)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
    at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2984)
    at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
    at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
    at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
    at java.lang.Class.newInstance(Class.java:374)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:148)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
    at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:406)
    at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:352)
    at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:122)
    at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:88)
    at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:164)
    at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:91)
    at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:68)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
    at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
    at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
    at oracle.security.jps.internal.policystore.PolicyUtil$3.run(PolicyUtil.java:2956)
    at oracle.security.jps.internal.policystore.PolicyUtil$3.run(PolicyUtil.java:2950)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2950)
    at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
    at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
    at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:526)
    at java.lang.Class.newInstance(Class.java:374)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:148)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Sep 6, 2013 7:41:20 PM IST> <Notice> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680728> <BEA-000365> <Server state changed to FAILED.>
####<Sep 6, 2013 7:41:20 PM IST> <Error> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680728> <BEA-000383> <A critical service failed. The server will shut itself down.>
####<Sep 6, 2013 7:41:20 PM IST> <Notice> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680735> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
####<Sep 6, 2013 7:41:20 PM IST> <Info> <WebLogicServer> <blr2211427> <AdminServer> <main> <<WLS Kernel>> <> <> <1378476680754> <BEA-000236> <Stopping execute threads.>
When I tried to google it to find some information I found that I need to provide full access (0777) to the cwallet.sso file available under the MW_HOME\user_projects\domains\domain_name\config\fmwconfig\bootstrap\ location. I did this but was not able to succeed.
I followed following link: http://www.techpaste.com/2012/04/jpsruntimeexception-jps-06514-opening-file-based-keystore-failed/
Also tried other solutions mentioned there but non worked.
Please help.

have you tried taking the backup of keystore.xml and cwallet.sso file, delete them and then restart admin server?

Portal Runtime Error with the UWL

Hi Poartal analysts,
Iam getting the problem like
"Portal Runtime Error--- form elements must have unique Ids : Image Attachment- 21738612 ........................"
when clicking on UWL page.This error is occuring to only one user.
Please advice.

HI Sheker,
Go thru this threads hope it helps you to resolve the problem.
1. [UWL Administration error;
2. [Re: Error in UWL config help!!;
3. [Re: Portal Runtime Error;
4. [Re: Runtime error in EP 6.0 SP 2 after installing UWL;
points if helpful
Thanksyou,
Regards
Vijai

Apple Configurator 1.3.1 crashes. I haven't been able to prepare any IPad with the configurator.

New to this process and we are setting up bays for IPads in an education environment. I'm able to load a profile (unsupervised) onto an IPad but as soon as I choose supervise and prepare the IPad the Apple Configurator crashes with the error message below. I'm not sure how to proceed from this - running OSX 10.7.5 and configurator 1.3.1. The Mac book pro was bought to supervise the IPads and not used for anything else. Have reinstalled configurator without any luck. Any help would be appreciated.
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
274
*** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'ACUUnpackFirmwareOperation cannot fail the operation and without setting an error'
*** First throw call stack:
          0   CoreFoundation                      0x00007fff82091f56 __exceptionPreprocess + 198
          1   libobjc.A.dylib                     0x00007fff8e4f1d5e objc_exception_throw + 43
          2   CoreFoundation                      0x00007fff82091d8a +[NSException raise:format:arguments:] + 106
          3   Foundation                          0x00007fff8971a71f -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 169
          4   Apple Configurator                  0x0000000105795563 _mh_execute_header + 701795
          5   Apple Configurator                  0x000000010579678b _mh_execute_header + 706443
          6   Apple Configurator                  0x0000000105756707 _mh_execute_header + 444167
          7   Apple Configurator                  0x0000000105757904 _mh_execute_header + 448772
          8   Foundation                          0x00007fff896aa912 ____NSOQSchedule_block_invoke_2 + 124
          9   libdispatch.dylib                   0x00007fff8a60da82 _dispatch_call_block_and_release + 18
          10 libdispatch.dylib                   0x00007fff8a60e961 _dispatch_worker_thread2 + 255
          11 libsystem_c.dylib                   0x00007fff87bd33da _pthread_wqthread + 316
          12 libsystem_c.dylib                   0x00007fff87bd4b85 start_wqthread + 13
objc[179]: garbage collection is OFF
abort() called
terminate called throwing an exception

Boy, I sure hope you found a solution to this. THe exact same thing happened top me, yesterday. I thought it was the updates to the iTunes store and the release of iOS 7. However, today, it is still happening. I was partway through setting up iPads for a 1:1 initiative. The first 11 worked fine, then the strangeness started.    Most of it seemed to relate to the iTunes store, but the worst part is exactly as you describe, and I have the same setup.   MacBook Pro specifically to manage the iPads. Configurator crashes whenever a device is hooked up to "supervise" even if it is fresh out of the box. The details on the crash also show the "Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'ACUUnpackFirmwareOperation cannot fail the operation and without setting an error'"
Oh, did I mention I have to have the iPads set up next week?
HELP!

Can some please help me with the Wireless LAN Connection Configuration?

I want to configure WLC in my Testing Lab , need help with the step by step configuration of WLC.

Please go through the below link for the Basic Wireless LAN Connection Configuration Example.
The below link has end – end configuration steps with the images.
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/68005-wlan-connect.html
Have i answered for your query.

Custom Application Configuration not pulling the data in E-Recruiting

Hello,
My requirement is to make some fields 'required', hide some buttons, change button texts & hide some columns in standard wd component (ERC_A_REQ_MGMT) delivered by SAP. So I created an application configuration and component configuration and did the layout customization. Now in the application I am passing this new configuration name with the parameter (sap-wd-configId)(......sap/bc/webdynpro/sap/erc_a_req_mgmt?sap-wd-configId=ZZERC_A_REQ_MGMT)
As this is a portal environment, in LPD_CUST, In the application parameters, I've used this parameter (sap-wd-configId=ZZERC_A_REQ_MGMT). The custom application is displayed, however, the data is not being passed to this custom configuration, so when I open a exisiting requisition from dashboard, this is shown as empty screen (like a new requisition), but when I take off this parameter from the lpd_cust, the standard app is working fine. Can you please help me understand why the data is not being passed to the custom application configuration?
Really appreciate your insights.
Thank you.

Hi,
We faced the same issue in SAP E-recruiting EHP4 solution. The reason is, the configuration which is assigned statically in FPM editor is loaded after the OVERRIDE_EVENT_OIF and thus discards all context nodes which have been already initialized. Afterwards, the context node of has no value anymore and the field on UI doesnu2019t display anything.
Remove the static component configuration in the FPM editor and use the following code in the wddoinit method of the view V_GEN_JOB_INFO. This assignment happens at the runtime.
data: lo_api_controller          type ref to if_wd_component,
        lo_pers_manager            type ref to if_wd_personalization,
        ls_configuration           type wdy_config_key,
        lt_config_table            type wdy_config_table,
        ls_config_header           type wdy_config_header,
        lo_fpm                     type fpm_s_runtime_info,
        ls_fpm                     type fpm_s_runtime_info.
      lo_api_controller = wd_comp_controller->wd_get_api( ).
     lo_pers_manager = lo_api_controller->get_personalization_manager( ).
     lo_fpm = wd_comp_controller->go_fpm->get_runtime_info( ).
    ls_configuration-config_id    = u2018ZERU_REG_REQ_MGMT_UIu2019 u201C Your Component configuration name
    lo_pers_manager->load_config_by_key( ls_configuration ).
   Thanks,
   S Rajkumar.
Edited by: Rajkumar S on Aug 24, 2010 7:54 AM

How do I create a session with the datasource set in code not sessions.xml

I want to create a session where I specify the J2EE datasource name dynamically in code. Normally, I would hard-code a J2EE datasource name in sessions.xml e.g.
<login>
<datasource>jdbc/MyApplicationDS</datasource>
<platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</platform-class>
<uses-external-connection-pool>true</uses-external-connection-pool>
<uses-external-transaction-controller>true</uses-external-transaction-controller>
</login>
However, we don't want to use a hard-coded string "jdbc/MyApplicationDS". We want to be able to set this at runtime.
I found this in the App Developer's Guide:
Configuring an External Connection Pool in Java
To configure the use of an external connection pool in Java:
1. Configure the DataSource on the server.
2. Configure the Login to specify a DataSource and the use of an external connection pool:
login.setConnector(
new JNDIConnector(new InitialContext(), "jdbc/MyApplicationDS"));
login.setUsesExternalConnectionPooling(true);
and this:
Configuring Sessions with the sessions.xml File
OracleAS TopLink provides two ways to preconfigure your sessions: you can export and compile Java source code from the OracleAS TopLink Mapping Workbench, or use the OracleAS TopLink Sessions Editor to build a session configuration file, the sessions.xml file.
It seems like I should export and compile Java code that calls login.setConnector(), but I can't find out any information on how to do this. I looked at the MW user guide and I didn't see anything on this.
I also found this by searching this discussion forum:
To create a server session completely from code given a project you can use,
project.getLogin().setConnector(new JNDIConnector(new InitialContext(), "your-datasource-url"));
project.getLogin().setUserName("");
project.getLogin().setPassword("");
Server server = project.createServerSession();
server.login();
However, I don't know how to get the project.
Thanks,
Vicki

If you are using a sessions.xml file, you can get your project from your session. Ensure that when you access your session from the SessionManager, that you do not have it login.
Session session = SessionManager.getManager().getSession("my-session", false);
session.getProject().setConnector(...);
session.login();
If not using a sessions.xml, you can either read your Project from the XMLProjectReader, or instantiate your Project class directly.

I have an airport extreme and am trying to extend the range of the wireless network with an airport express. I set it up with the help of apple support, both lights are green on both airports, but the range didn't change. What could be wrong?

I am trying to extend the range of my wireless network by adding an airport express to an airport extreme. I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house. What could be the problem? Does weather affect the wireless network??

So, on the Extreme you checked the box to "allow this network to be extened" ?
Correct?
And on the Express, you set it up to "Extend a wireless network" ?
Correct?
See this Apple article and see if you missed anything...
http://support.apple.com/kb/HT4145
To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
Set up: Components of an extended network
➊ Primary Wi-Fi base station (this is the base station connected directly to the Internet)
➋ Extended base station
Configuring a wireless extended network
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.

Using the UWL API inside a Web Service

I wrote a Web Service to get the number of new tasks and the total number of tasks for a user like it is displayed in the UWL in the DefaultView.
The numbers are retrieved by the following code:
user = com.sap.security.api.UMFactory.getAuthenticator().getLoggedInUser();
// JNDI lookup for getting the service because we are not in the PRT container
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sapportals.portal.prt.registry.PortalRegistryFactory");
InitialContext initialContext = new InitialContext(env);
uwlService = (IUWLService) initialContext.lookup("/broker/services/" + IUWLService.ALIAS_KEY);
if (uwlService == null) {
     throw new Exception("Cannot get UWL Service");
context = new UWLContext();
if (user == null) {
     throw new Exception("No user");
context.setUser(user);
context.setLocale(user.getLocale());
session = uwlService.beginSession(context, 200);
context.setSession(session);
context.setAllowBackEndConnections(true);
itemManager = uwlService.getItemManager(context);
UWLView view = uwlService.getViewManager(context).getView("DefaultView", context);
if (view != null) {
     QueryProperties properties = new QueryProperties();
     properties.setMaxNumberOfItemsToFetch(0);
     QueryResult result = itemManager.getItemsForView(context, view, properties, null);
     totals = itemManager.getTotalAndEmphasizedItemCountForView(context, view, "", null);
In the first step I chose basic authentication. When debugging I see that the web service gets the information about the logged on user. The UWLService, item manager, session and view, all of them are determined resp. created.
But when calling getItems the UWL exception "Logged in users context or session doesn't exist" is thrown.
When calling the same functionality from Web Dynpro everything works fine.
Service and session are determined like this
uwlService = (IUWLService) WDPortalUtils.getServiceReference(IUWLService.ALIAS_KEY);
context = new UWLContext();
IUser user = WDClientUser.getLoggedInClientUser().getSAPUser();
wdContext.currentUIStateElement().setUserName(user.getFirstName() + " " + user.getLastName());
context.setUser(user);
context.setLocale(WDResourceHandler.getCurrentSessionLocale());
session = uwlService.getUwlSessionForWebDynproClient(context);
Does anyone know how to work with the UWL API in a web service context?
Thanks in advance
Antje

Hi Experts,
We are also facing the same issue as of Yomesh.
The strange part here is that, yesterday, the code was fetching the User and we were able to run the whole web service.
Suddenly, this doesnt seems to be working today. And after debugging, we found that, the User is not being returned with the below code:
user = UMFactory.getAuthenticator().getLoggedInUser(wsContext.getHttpServletRequest(), null);
Any help is highly appreciated.
Thanks in Advance!!
BR,
Uday

How can i configure STMS with out physical systems

Dear Experts ,
please solve my doubts
here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities
and i started some activities also
presently my doubt is in STMS configuration
here i have only one system (DOMINE CONTROLLER) and we need to other systems while configuration but we dont have other systems like quality and production how can i configure that systems in my landscape
this is my first implementation Experience please suggest me with some valuable suggestions
my doubts:
while creating systems we need to take for virtual systems or Extended systems
which transport routes can i prefer for Dev to Qly systemand also Qly to Prd
please reply me
Regards

Hi,
If you have decided the SID's of the QUA and PRD systems then you can configure TMS with the virtual systems. Here are the steps to do so.
Login to the domain controller
Execute tcode STMS
Goto the menu overvie --> systems (Shift+F6)
SAP SYStems --> Create --> Virtual system
Enter the SID and description and then save ur entries.
Now the new virtual system will be created. Do the above for the others systems in the landscape.
Again execute STMS and then click SHIFT+F7. You will goto the transport route window. Now you can configure TMS for the systems in the list as usual.
Hope this helps.
Regards,
Varadharajan M

Package configuration.xml with AnyConnect NAM installer?

Hi, I am running AnyConnect 3.1. I have configured a new configuration.xml file and tested locally. I would like to package this new configuration file with the AnyConnect installer similar to how an ASA does, but without the ASA. This way, clients can run the setup wizard one time and the correct configuration file comes up the first time. Is this possible without an ASA? Thanks.

I found a post that explains how to do this...
https://supportforums.cisco.com/document/93891/anyconnect-secure-mobility-client-30-network-access-manager-profile-editor-windows

To maintain material with the plant

hi to all,
i hv create a configural material, but when im going to create a BOM for the material i face error, "material not maintained in plant". i want to know how i maintain this configural material with the plant to create BOM?

Hi
It seems you have created the material without giving any plant number
you need to go again T code MM01 give the material number select the required views and give the plant number and storage location then system will extend tis material to the respective plant
then you go ahead with BOM etc..
Regards
Abu Fathima

Configuration of Portal for UWL

Hi,
Please let me know about how to configure Portal for the UWL.
Thank you.

Hi,
Please follow the following link. It has been explained in detail:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/103e2cf0-ec95-2b10-d198-a2d5edfbd7f8
Regards,
Niraj

Configure SSO between the SAPGUI and ECC 6

Hi,
I need a help to configure SSO between the SAPGUI and ECC 6. I configured the SNC using the parameters:
snc/accept_insecure_rfc = 1;
snc/accept_insecure_gui = 1;
snc/accept_insecure_cpic = 1;
snc/identity/as = p:Domain\SAPService;
snc/enable = 1;
snc/data_protection/use = 1;
snc/data_protection/min = 1;
snc/data_protection/max = 1;
snc/gssapi_lib = D:\usr\sap \ <SID>\SYS\exe\nuc\NTI386\gssntlm.dll.
I configured desktop with the DLL sncgss32.dll but is not functioning. Somebody has some idea the how solve this problem?
Thanks
Alex

Hi Alex
You have
snc/identity/as = p:Domain\SAPService;
Check the following (wrong user)
snc/identity/as = p:Domain\SAPService<SAPSID>
Where SAPService<SAPSID> is the user who runs the SAP System.
You have
snc/gssapi_lib = D:\usr\sap \ <SID>\SYS\exe\nuc\NTI386\gssntlm.dll
Check the following (nuc is a wrong directory, the correct is uc)
snc/gssapi_lib = D:\usr\sap \ <SID>\SYS\exe\uc\NTI386\gssntlm.dll
Please, reward points if helpful
Edited by: Eydar Del Angel on Apr 21, 2008 4:54 PM
Edited by: Eydar Del Angel on Apr 21, 2008 4:55 PM

Configuring BPM with the UWL

Similar Messages

Maybe you are looking for