Configuring CCMS monitor

Hi All ,
I am facing problem while configuring the CCMS monitor through tcode rz21.
Kindly suggest me the steps in configuring ccms to help me out in resolving the issue.
Thanks
Gaurav

Hi,
check this links:
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/df1241c738f423e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/forums
Regards,
Spandan

Similar Messages

How to start to configure CCMS monitor sets ?

hi,
when executing RZ20, the screen title is
CCMS Monitor Sets - Maintenance functions OFF
does it mean that the monitoring is not configured yet ?
if i were to start the monitoring, how do i turn it on ? what needs to be monitored ?
please share with me how you make sure of the CCMS monitor sets.
comment and advice will be highly appreciated.
regards,
kent

RZ20 --> Extras --> Activate Maintainence functions
does it mean that the monitoring is not configured yet ?
Im not sure what this means. To copy the templates, I think you have to activate the maintainence function (not sure). I always do this as the 1st step.
if i were to start the monitoring, how do i turn it on ?
There are many things you will need to do
1. Configure SCOT to send out emails
2. Configure an auto reaction method (CCMS_ONALERT_EMAIL_V2)
3. Assign it to the nodes you need to monitor
4. Assign the auto reaction method to those nodes
etc etc
what needs to be monitored ?
Usually it is the database and the filesystem space, performance etc. It really depends on what you want.
please share with me how you make sure of the CCMS monitor sets.
Look at this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
comment and advice will be highly appreciated.
Kunal
Edited by: Kunal Belnekar on May 22, 2008 10:10 AM

CCMS monitoring configuration

Hello,
I am trying to configure CCMS monitoring in Solution Manager. However I am unable to find any documents to guide me through the process. kindly help.
Thanks.

Hi
Please use the standard Monitoring Setup Guide, for CCMS Configuration of Solution Manager.
Just keep in mind, that Solution Manager will be then your CEN (central monitoring) system. And other satellite system will be Monitored system.
Refer to guide available @
https://service.sap.com/operationsnw70 > Monitoring > Monitoring Setup Guide SP15.
I hope this will help. Please revert for further details.
Best Regards,
Pradeep Bishnoi

CCMS monitor configuration

Hello Experts.,
Without use of BASIS Solution manager, is that possible to configure CCMS monitoring tool directly on SAP BI for monitoring the same.. or is there any option with ABAP coding we can monitor ?
BR,
ANI

Hi,
This note maybe help your business.
http://scn.sap.com/thread/1186071

CCMS monitoring for adapter engine

Hi,
We have configured CCMS monitoring for Adapter Engine for our client.
In RZ20 im able to see the alerts come up,with the default data that the system provides.
1. I need to send a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed. How do I get over this?
2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
Thanks
Shakthi

Hello!
Please check the blog entry below
Configuration for forwarding Alerts as Emails
Configuration for forwarding Alerts as Emails

Missing "SAP XI Adapter engine" in CCMS Monitor

Dear all,
we try to configure PI CCMS monitor but we can't find the subtree "SAP XI Adapter engine " in Visual admin.
In detail:
the subtree "SAP XI Adapter engine "is not displayed in Visual administrato under
server->service->monitoring->Monitor tree ->Root application .
So we have set to true the value "CCMSEnabled" of seervice "SAP XI AF core" , and we have restarted the instance.
After the restart i DO NOT find the "SAP XI Adapter engine " in
SAP NetWeaver Administrator,
'System Management' -> 'Monitoring' -> 'Java System Reports' -> 'Reports'. From the dropdown list 'Report' choose 'Monitor Browser', and display all monitors
So I can't activate the monitor.
and if the subtree is not present , i can't see the MTE in "SAP XI Adapter engine " RZ20.
Additional info:
- In RZ20 I have my system under SAP J2ee Monitor template->All system
but the MTE "J2EE Applications" is grayed.
- In file application.xml under /usr/sap/ccms/XIT_10/j2ee<server0> i do not find the tag:
<app name="application sap.com/com.sap.aii.af.app">
<node>\XIT\XIT 10 Appl .... sp30t0\SAP XI Adapter Engine</node>
</app>
I think this is the correct procedure that we have done in other different landscape whithout problems.
Is there something else to check ?
I've alredy checked following Blogs
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Thanks in advance
Steven

Hi Sekhar,
I am using PI 7.0 instead so I have followed the instruction in (http://help.sap.com/saphelp_nw70/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm) instead.
The problem is, Adapter Engine is still not listed as one of the application avaialble for Monitoring in Visual Admin even though the SAP XI AF Core has definitely been set with CCMSEnabled = true.
Any further suggestions?
Thanks,
Wi

Unable to configure CCMS alerts

Hi All,
I'm trying to configure alerts in RZ20.
e.g. whenever there is an error in Mapping (EXCEPTION_DURING_EXECUTE), I can see the alerts in rz20, but I cannot trigger an alert to Alert Inbox.
I tried to follow the following weblog:
/people/sap.user72/blog/2005/03/03/alert-management--use-it-in-ccms-to-shorten-response-times-for-business-critical-situaltions
But it's not working.
Any help?
Regards,
Puloma.

Hi Puloma,
Please check these..
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/dirk.jenrich/blog/2006/06/28/event-log-monitoring-using-ccms-agents
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/04983c6e577546e10000000a11405a/frameset.htm
cheers,
Prashanth
P.S Please mark helpful answers

CCMS monitoring alerts

Hi Experts,
I need to install and configure CCMS Monitoring alerts.I don't have idea about CCMS, please help me for this and give me any links or docs.
In my Landscape we have 4 SAP systems.
1. SAP CRM7.0 EHP2
2.SAP ECC6 EHP5
3.NET WEAVER 7.3 EHP1
4.SAP SRM7.0 EHP2
Thanks
Jana

Hi Jana,
Please see link:
http://help.sap.com/saphelp_crm700_ehp03/helpdata/en/49/2d927507361903e10000000a42189c/frameset.htm
Normaly CCMS alrts are set as default. If it is not activated please see as well note 1827820 which might have been applied in your system.
Best regards - Christophe

CCMS monitoring

Hello,
We want to configure CCMS monitoring for one our systems.
But we don't want to configure CEN using Solution manager.
After searching, I found that every source describes the process for configuring CCMS using CEN.
I know that we can configure CCMS on individual systems also. But I am unable to find the right set of steps for it.
Any help would be appreciated.
Thanks.

To configure CCMS on the single system (not as CEN) Please follow the steps below.
1. Got to RZ20
2. Select "SAP CCMS Monitor Templates"
3. Drill down the MTE which you need to monitor and select that.
like to monitor table space:
SAP CCMS Monitor Templates->Database->Oracle->Space Management-> table space name->used space
4. click on properties
5. assign the autoreaction method which you already copied from CCMS_OnAlert_Email
you would need to provide the info in autoreaction method before assigning it to any MTE like email distribution list, sender user id and releasing this method as autoreaction.
Email distribution list should be created in SBWP in client 000, send user id should also be created in client 000 and email should be configured in client 000 under SCOT transaction for auto reaction method working properly.
Thanks,
Best Regards,
Prabhat Sharma

RFC issue with TREX CCMS monitoring

Hello,
I have a TREX 7.10 instance (running on a Windows Server) and a SAP Solution Manager System 7.01 (on Unix Server) which is used as central CCMS monitoring system.
I have configured CCMS Monitoring for TREX according to the pdf document that is attached to SAP note 897226 ('Monitoring TREX with CCMS. Alerting seems to work, the autoreaction method that I defined for e.g. unavailabitlity of TREX processes is triggered when I test it.
In SolMan system, transaction RZ21, agents for remote systems, I see that the agent for the TREX instance is in status 'Online'.
But when I highlight this agent and click on the button 'Test Connection' I get 'Error when opening an RFC connection'.
In TA SM59 of SolMan system I am doing connection check for the two TCP/IP RFC destination related with that TREX instance
N3STAT.<hostname>.<Nr> and
SAPCCMSR.<hostname>.<Nr>
For both I get the error 'program <hostname>.n3stat.<Nr> not registered' respectively 'program <hostname>.sapccmsr.<Nr> not registered'
I am a little bit confused how to fix this. Can somebody help ?

In the meantime I could solve the issue.
The solution is that the registration command on TREX host had wrong parameters.
I only have a pure TREX instance, no ABAP instance, no Java instance on the same host.
In this case you have to register your agent at central SolMan system this way:
sapccmsr -R pf=
Don´t use the -j2ee parameter if you don´t have a java instance there.
Please see the screenshot and the legend under:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/frameset.htm

Systems errors node in CCMS monitoring

Hello,
I try to build up CCMS monitoring in our XI system.
At the moment there is no error in the system.
When following the instructions from SAP and SDN everything looks fine except one issue.
E.g. in /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 from Aravindh (great blog series!)
in the first screen shot there is a node "System errors".
Such a node is missing in my configuration!
My question is: How to generate it, e.g. to implement a mail sender for upcoming errors in the category node?
Is this node generated automatically when the first error comes up for one of the different categories?
Best regards
Dirk

Dirk,
Go through the below links:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
With the help of those you can configure and get System Erros node in CCMS.
Regards,
---Mohan

Cannot see CCMS Monitor Templates - System is not configured

I just finished installing SAP Netweaver Trial, and I have been able to login using the SAP* and DDIC accounts.
I can see the standard tree via the SAP client GUI.
I am trying to take a look at the CCMS Monitor Sets, and I can see the standard collection of "Entire System", "Performance Overview", etc. all fine.
However, when I double-click to load any of the monitors, I see nothing inside.
No sub-trees, nothing.
I enabled "Display error nodes" and see a node that says
"NSP : System is not configured"
I have tried creating my own user, adding in profiles like SAP_ALL, S_A.System, etc.
I also notice everytime I access the CCMS Monitor Templates, there is an entry in the Syslog:
Severity: Warning
Process Type: D0
Transaction Code: RZ20
Client: 001
User: DDIC
Message ID: BYE
Description:
Database: Invalid parameter ObjTooLar transferred to database interface
Please let me know if I am missing any components, or if there is something I need to do.
Thank you.

Thanks Sunny.
That thread did indeed helped me to resolve the issue.
However, the thread did not really provide clear instructions to complete newbies like me.
For those who also have the same issue, this is what I did:
1. Execute RZ10 (Edit Profiles) via the SAP client GUI
2. Click on the menu Utilities - Import profiles - Of active servers
3. Edit the "Instance Profile" NSP_DVEBMGS00_{Your Computer Name}
Select Extended Maintenance, and select Change
4. Change the following two parameters:
alert/MONI_SEGM_SIZE from 0 to 60000000
rdisp/autoabaptime from 0 to 300
5. In the SAP MMC, right-click on NSP and select Restart
6. After restarting, login and you should be able to see the CCMS Monitor Template nodes

Configuring CCMS alerts for Availablity Monitoring

Hi All,
We are in the process of configuring availablity monitoring in central system (solution Manager 7.0 with SP stack 23) to monitor all systems (ABAP,Java,Dual Stack, Trex,DMS,etc) in landscape.
As a first step, we have registered CCMS agents in monitored (ABAP) system and connected to central system (Solman)
All the required RFCu2019s have been defined for data transfer between monitored and central system
In RZ20,i could see the availablity as 100% for the defined moniored system under SAP CCMS Technical Expert Monitors>All Contexts on Local Application Server>CCMS self monitoring >CCMS agents>CCMSPING.hostname
Not sure whether above path is the place where in we look for alerts
Please clarify the below points
i) how to configure the email alerts (in RZ20) from the central system when monitored system is down
ii) the path in which I can find the alerts in RZ20 for that monitored system or how to add the monitored system incase if that doesnt exists
iii) MTE class under which analysis, auto reaction method to be assigned ?
iv). data collection method and frequency
v). Which MTE class to be used to assign the Autoreaction method (CCMS_test_mail alredy defined)
Appreciate your quick response on this
Thanks,
vadi

Hi All,
Thanks a lot for your reply.
Still i m having an issue in handling the RZ20 alerts managemnent
In RZ20,
i) i able to see the added monitoried system id under the node CCMS Monitor templates>Availablity & performance overview>Availablity-->monitored sys id
ii) When i click on open staus for the above node turns to green color
ii) when i click on current status the node turns to grey color
I am not sure whether the data collection is being passed since it doesnt turn red when the system is down
However the dispatching jobs are active in both CEN and monitored (000 client) systems
Appreciate your response
Thanks,
Vadi

How to configure CCMS alert to monitor Authorization failures?

Dear All,
How to configure CCMS alert to monitor Authorization failures?
Thanks
Ashok

Hello,
in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
http://service.sap.com/monitoring
If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
Regards
Christian
Edited by: Christian Rose on Apr 25, 2011 7:59 PM

"No CEN system configured for CCMS monitoring" message

Hello,
When I want to use the reports option on central mode I receive this message:
"No CEN system configured for CCMS monitoring"
Can someone please guide me through this configuration?
Thank you in advance,
Roy

Hi Roy,
Monitoring Setup Guide will tell you how to setup CEN
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f30e51-0a01-0010-f59a-fecea2b95b2c
Regards
Juan
Please reward with points if helpful

Configuring CCMS monitor

Similar Messages

Maybe you are looking for