Configuring Cisco Router for use with Syslog Server

Configuring Cisco Router for use with Syslog Server:
Does anyone know of a good doc for this?
-Ashley

Start with that one: http://security-planet.de/wp-content/uploads/2008/12/logging-ios.pdf
And if you need more informations, just ask what you want to achieve.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Similar Messages

Configuration of XSQL for use with non-Oracle dbs

If anyone has positive experiences with configuring XSQL for use with non Oracle databases I'd like to hear how they did it, see tutorials, configuration files, etc.
Specifically setting up to use MySQL or Postgresql on Linux/FreeBSD would be very interesting.
Also, does anyone use this without setting mime types? How would you go about this so you could point to the relevant servlets in the page?
Josh

I don't understand how setting up for Non-Oracle DB's is related to not setting up the servlet as an extension-mapped servlet.
It might work, but would you run JSP's
that way? XSQL behaves very similiarly
inside to how a JSP runner works, which
wants to be servlet-mapped.
However, OAS 4.0.8.1 does not support
extension mapping and XSQL works there
so i'm assuming it would work on other
servers set up that way. It's not
a configuration we test/certify.
null

Best wireless router for use with Powerbook 15"

Not everyone uses the Apple Airport, and some who do have mixed feelings about the various models.
What is the best wireless router, from any manufacturer, for use with an AlBook? What has the least problems, most reliable, strongest signal, fewest drops, best range, etc in your experience.

Joeski,
I'll have to get back to you on what card my wifes laptop is using. I think it's a 802.11a/g, but I will confirm. My Powerbook 1.67 has the built in wireless card and to be honest, I have never looked to see what it uses.
We have our D-Link router set up for WPA2.
Neither her or I have had any issues when we have had to connect anywhere to any other wireless network and when I come home, I can connect back to my router automatically since my network is set up on my Powerbook as my 1st network of choice in connecting.
As far as replacing the antenna, I really dont know. It's has 3 antennas on it and I get a great signal, so I never thought about replacing it.
Hope this information is helpful to you!

Cannot configure wrt54gs v6 router for use with filezilla FTP client

I am new to working with FTP and very rusty on networking in general. I just downloaded filezilla to create a FTP client on my desktop. When I run their wizard, it says the connection is tainted by my router. All the forums for filezilla say I need to configure my router to allow traffic on either port 21 (ftp) or a range of ports ( they suggest 50000 to 50100).
Please let me know what I need to do to make this work
thanks in advance
ldygunner

To answer your other questions, the tutorials have it all wrong. What they really need to explain, but fail to do so, is that the only situation where a FTP client would need to use active mode (the PORT command) is where the FTP server can't accept inbound connections on arbitrary port numbers. But that's a pathological case anyway: the FTP server can always accept connections on some well defined set of port numbers, to keep its own local firewall or NAT router happy. Consequently, there is really no need at all for a FTP client system to open up any ports to support active mode, rather than always operate in passive mode (as browsers do.)
The fact of the matter is that if passive mode works in a browser for you, it will work for Filezilla also.
And the configuration tests it runs are brain damaged. Even though the wizard recommends passive mode, it never tests for it. And it doesn't really test active mode either. What it really tests is whether anything between the client and the server is "transparently" translating IP addresses and port numbers. Such a test is broken, because the mere fact of port numbers being rewritten in TCP packets is irrelevant to whether PORT (active mode) will succeed or fail.
For completeness, in case someone decides to get pedantic, there is a case where a FTP client system would need the active mode PORT command to work, but that case is now of historical interest only. It's a scenario that FTP servers no longer support, for security reasons. (What is it? When the FTP client is operating as a controller to remotely transfer files between two servers: it tells one server to use passive mode, and sends the address/port it gets to the other server in active mode, which in theory would make the second server open a connection to the first. This, in fact, is why two modes, active and passive, were originally defined in the FTP standard!) And it still wouldn't need open ports on the client system.
Message Edited by arayq2 on 10-19-2008 09:12 PM

How do i configure the usb port on a draytek vigor 2820n router for use with my imac

i have an imac connected to the internet through a draytek vigor 2820n router. this router has a USB port with a HP Deskjet 5560 printer attached (for use as a network printer for other machines on the network). How do I configure this printer on the iMAC?

I checked on the HP web site. Your aswer is on the HP website under your printer type. Update your drivers and follow the instructions given by HP and the printer will work as you have it connected.
Good Luck

Configuring Cisco ISE for Authorization with External Radius Server attribute

Hi,
I'm trying to integrate an external radius server with Cisco ISE.
I created an External Identity Store>Radius Token Server.
I created a Identity Store sequence with just one identity store just as creadted above.
And I was able to authenticate successfully.
But when it comes to authorization.
I observed we just have one tab named Authorization while creating Radius Token server.
And it always refers to ACS:attribute_name.
If I want to define a IETF radius attribute, (lets say class with attribute id as 25), how could I do it.
In Cisco ACS we have a direct entry option in authorization tab where we can define the radius (IETF) attribute within Radius token server creation (within radius token server>Directory attribute tab).
How ever I try to define the IETF attribute here (class,IETF:Class) I am not able to authorize with this attribute value.
I tried with just one single authorization rule where it could hit.But observed it to go the default(as none of the rules defined matches the condition).
Can anyone guide me how can we define a IETF radius attribute for authorization within Cisco ISE and what policy could we set it to work as authorization.
Thanks in advance
Senthil K

This is the step of Creating and Editing RADIUS Vendors
To create and edit a RADIUS vendor, complete the following steps:
Step 1 From the Administration mega menu, choose Resources > RADIUS Vendors.
The RADIUS Vendors page appears with a list of RADIUS vendors that ISE supports.
Step 2 Click Create to create a new RADIUS vendor or click the radio button next to the RADIUS vendor that
you want to edit and click Edit.
Step 3 Enter the following information:
• Name—(Required) Name of the RADIUS vendor.
• Description—An optional description for the vendor.
• Vendor ID—(Required) The Internet Assigned Numbers Authority (IANA)-approved ID for the
vendor.
• Vendor Attribute Type Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute type. Valid values are 1, 2, and 4. The default value is 1.
• Vendor Attribute Size Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute length. Valid values are 0 and 1. The default value is 1.
Step 4 Click Submit to save the RADIUS vendor.

Cisco ATA for Use with Time Warner Digital Phone

Is it possible to do the following with any of the Cisco products? Basically I want to have the incoming line from Time Warner go to the PBX to answer calls and then have the PBX route the calls appropriately. I currently have a Linksys PAP2 v2, but I don't think that will work because I think both ports are FXS and I'll need an FXO and an FXS. I have attached a diagram.
Regards,
Scott

So the Linksys PAP2 I have in my diagram, or a Cisco SPA-3102 cannot route inbound calls to the PBX via FXO and then route the call to internal analog phones via the FXS as directed by the PBX given that the PAP2 or SPA-3102 would register to the proxy? I'm really looking to just permit the PBX to talk to the analog stations since I can't get a SIP trunk from the Time Warner modem and with my lack of knowledge on VoIP it seems like the 2901 is over kill. If the router is necessary, then how is it that the PAP2 can connect directly to the internet and link up with Vonage or other similar providers with an analog phone connected to it? The PAP2 is going to communicate with Vonage via SIP and the phone is analog, so there must be some form of encoding going on inside the PAP2, which is what the PVDM does inside the router. So I guess I'm really looking for someone to solidify my understanding of what is needed that the PAP2 or SPA-3102 can't provide. There are a lot of posts on the internet with folks using these devices, but I suspect they are still using a SIP provider as opposed to an analog handoff like Time Warner gives.

Is there a universal way to configure time capsule for use with magic jack plus?

I've got the magic jack plus connected to my time capsule. Works most of the time, but lately it's been dropping calls or I'll get error messages stating to check the internet connection. Most say its related to the router settings.

Note I do not own magic jack but it looks like a standard ATA voip adapter.
How is the TC setup in the network? ie is it bridged or main router.. Is there another router?
Being a non-apple product you will do better sticking with SMB compliant network names.. ie short no special characters no spaces.. Apple by default break these rules.
Also you may have port forwarding issues.. apple do not use upnp most windows and non-apple products will expect and so you might have to open the required ports not just for sip but the actual call RDP packets.
Even if you do open ports apple routers often break port forwarding. You might find it is easier to use a modem router or alternative standard router and bridge the TC.
Look at posts that deal with issues which will be common with airport extreme.
https://discussions.apple.com/thread/3662236?start=0&tstart=0
I would say it is not working because you have not forwarded the required ports.. or it just doesn't like Apple routers.. plugged into the Mac, the networking is handled by the Mac.. and is able to auto open ports.. non-apple products cannot generally do that.

My Deskjet 3050 J610 will not connect to my Virgin WiFi router for use with Apple Mac laptop.

I live in the UK and have Broadband access via a Virgin connection and WiFi router. My Apple MacBook laptop connects to the WiFi with no difficulties. However I have an HP Deskjet 3050 J610 printer which will not connect to the router. When I try to connect, the blue light just keeps on flashing but a connection is not found. Consequently my MacBook cannot "see" the printer on the network. Any suggestions? Thanks!

See if this helps.
Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How do I set up my router for use with only my laptop?

I want to use my WRT300N v1 broadband router wirelessly with only my laptop, but the set-up instructions I've seen involve wiring the router to a desktop. Can anyone provide me with the instructions I need?
Thanks.

It is not an mandotary step to connect the Desktop to the Router... it just indicates that first you need ant computer connected to the router using cable & working online ....
If you want to go online with Laptop .... either you can connect the Laptop to the Router using Cable or you can wirelessly go online ,.....
Connect the Laptop to the router using Ethernet Cable ,,,,, at LAN port 1-4 .... Check the light status ... access setup page ...
Click on the Wireless tab on the Setup page- Here Wireless Network mode
should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID
broadcast should be Enabled and then click on "Save Settings" >>Now
Click on the Sub tab under wireless > "Wireless Security" Change the
Wireless security mode to "WEP/WPA"...have a note of the key ... click save settings ...
On the Laptop try connecting to the Wireless network ...
See if it connects ....

Configure SQL Developer for use with SSL

Having trouble getting this working, Can someone point me towards the necessary steps or things to check?

Search for the other posts about "SSL" in this forum, useful info and tips there.
Have fun,
K.

Is there a plan to update Configurator for use with InDesign CC?

Hi all,
When will Configurator be available for use with InDesign CC... Is there a plan to update it in the near future to be compatible with ID CC?
Thank you so much:)
Christine

shane.daley wrote:
I have recently purchased an iPad Air 2 and to increase useability purchased a Logitech +type bluetooth keyboard. I'm very happy with both but disappointed in the lack of autocorrect function between the bluetooth keyboards (not a logitech deficiancy) and iOS.
Is there a plan to fix this please?!
Is that because you also ask the same question to Logitech and that was their response, since you're using a 3rd party software

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

Doesn't play songs, "itunes is not configured for use with mac-formatted"??

Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
Thanks for any thoughts!

Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
If there is anyone out there that can help please do!
Windows XP

Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated

I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
[server] Writing IOR to ... and it should generate the IOR file
but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
Thanks in advance.

[From Susan Doan, who is having trouble posting to the forum today}:
It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
Thanks,
Ole

Configuring Cisco Router for use with Syslog Server

Similar Messages

Maybe you are looking for