Configuring Content Manager for artesia
Does anyone have experience configuring the WL PS Content Manager to use a 3rd party content management system? Specifically, I'm trying to configure it to work with artesia's TEAMS product.I'd like to know if anyone has done this successfully before and, if so, what updates had to be made to the defualt configuration.Thanks,Don
That's quite the question. Before even attempting to answer, what do you know about OIM? Have you configured any connectors to understand how OIM works and the objects that make up a connector?
-Kevin
Similar Messages
-
Best Practice while configuring Traffic Manager for Azure Website
Hi Team,
I want to understand What is the best practice while we configure traffic manager for Azure website.
To give you the base, Here let me explain my requirement. I have one website which 40% target audiences would be East US, while 40% would be UK and rest 20% would be from Asia-pacific.
Now, What I want is Failover + Performance based Traffic Manager Configuration.
My thinking:
1) we need to create 1 website with 2 instances in each region (east us, east asia, west us for an example). so, total 3 deployment of website. (give region based url for the website)
2) create traffic manager based on performance and add 3 of those instances. that would become website-tmonperformance
3) create traffic manager based on failover and add 3 of those instances. that would become website-tmonfailover
4) create traffic manager and ?? don't know the criteria but add both above traffic manager here and take your final url for end user.
I am not sure (1) this may be the right approach or not (2) if this is right, in the 4th step which criteria we should select while creating final traffic manager round-robin/ performance/ failover?
after all these if use try to access site from US.. traffic manager will divert that to US Data-Centre or it will wait for failover and till that it will be served from east-asia if in configuration, east-asia is my 1st instance?
Regards, Brijesh ShahHi Jonathan,
Thanks for your quick reply. actually question is bit different. Let me explain you different way.
I was asking for recommendation from Azure Traffic Manager team. whether my understanding is correct or not.We want Performance with Failover.
So, One azure website we have: take an example todoapp. I deployed that in 3 different region. now, I want to have performance based routing as well as failover based routing. but obviously I can't give two URL to my end user. so, at the top of that I will
require one more traffic manager. So,
step 1: I will create one traffic manager with performance criteria named: TMForPerformance.trafficmanager.com where I will add all those 3 instances (all are from different region so, it want create any issue.)
step 2: I will create one more traffic manager with failover criteria named: TMForFailover.trafficmanager.com where I will add all those 3 instances (all are from different region so, it want create any issue.)
step 3: I will create one final traffic manager with performance criteria named: todoapp.trafficmanager.com where I will add these two traffic manager instead of 3 different region's website.
Question 1) Is it correct structure if we want to achieve Performance with Failover or Is there any better solution?
Question 2) in step 3, what criteria we should select? performance/ round robin/ failover
Regards, Brijesh Shah -
Configure incident management for VAR in solution manager 7.0 ehp1
I want to configure incident management for VAR in solution manager 7.0 ehp1, now on service.sap.com all i can find is * SAP Solution Manager 7.1 SP3 VAR Config Guide V1 * under https://websmp204.sap-ag.de/var-partner/.
Can anyone point me to config guides on what needs to be done on the customer end and my end(partner side).
I am trying to fulfill the PCOE requirement below
5. Do you have a fully operational Incident Management System?
Thanks,hi,
check out the below FAQ and
https://websmp208.sap-ag.de/~sapidb/011000358700000490172009E.HTM
Technical suppport
https://websmp208.sap-ag.de/~sapidb/011000358700000880802009E.PDF
and some more rkt and hw to guides on
https://websmp208.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000089947&
Thanks,
Jansi -
Oracle Content Management for spatial data
Hi,
Is it possible to use Oracle universal content management sofware for managing GIS files/spatial data.
Can we integrate Oracle Universal content management or anyother tool to manage spatial files. I am looking for standard content management features like login/chekin/checkout/security/previes for spatial files etc..
ThanksHi,
-Does this product required additional licensing cost or it came with bundle Please contact your Oracle Sales representative for license queries and questions.
Global Pricing and Licensing
http://www.oracle.com/us/corporate/pricing/index.htm
-Does this product require additional server or it can be run on application server?
-What are the key feature we can get from Oracle Content Management Server?
-What kind of document we can store in Oracle Content Management Server?
-How much additional resources required if we deploy this product?Please refer to the following links.
Note: 305373.1 - Oracle Document Management in Release 11i through 12 - Installation and Configuration
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=305373.1
Oracle Universal Content Management
http://www.oracle.com/products/middleware/content-management/universal-content-management.html
Oracle Content Management 10gR3 (10.1.3.3)
http://download.oracle.com/docs/cd/E10316_01/ouc.htm
Regards,
Hussein -
Creating transport request in Content management for uploading the doc.
HI,
I am uploading a document in SAP CRM content management.
Before starting the process whether I need to create a 'transaport request " for the same.
reply with the vauable inputs.
Thanks & REgards
Prajith PHello
[SAP Note 1296926 |https://service.sap.com/sap/support/notes/1296926]explains the steps you need in order to transport document templates.
Regards
Joaquin -
How to Configure Solution Manager for 1.Download SuppPacks 2. Monitoring 3
We recently upgraded to ECC 6.0 and installed Solution Man., very vanilla. Basically just to get the Key to do the upgrade with.
I would really appreciate it if someone could share any documentation that would provide guidance on how to now further configure SolMan for the following
1. Monitor our Landscape which comprises of ABAP ECC (java is installed though not actively using), and SAP BI 7.0
Sandbox, Dev, QAS and Prdn for BOTH ECC & BI
2. Download Support Patches from SAP Marketplace (currently we have had to donwload the long way with download manager creating a message to get them apporoved whew... this is work..)
3. Add messages to SAP Market Place (thru SolMan)
4 Possibly monitor security and manage userids etc (if possible)
And if there is functionality that will make the BASIS experience better I would definitely appreciate it. We don't need the help desk as we already have it ,but, we may take advantage of Project documentation
I would really really appreciate it if someone could advise
Kind Regards & Thank You
MariaHi Maria,
With solution manager you can definitely do a world of things, below is a list inclusive of the features you wanted:
1. Dowload SP-Stacks, etc - you will have to configure Maintenance Optimizer for this (MOPZ).
2. Monitoring - you can monitor your ABAP and JAVA stacks using the monitoring features of CCMS which is embedded in Solution Manager, please have a look at the monitoring setup guide (for NW04S) in the Service Marketplace. Basically, it uses agents such as SAPCCMSR for JAVA Stacks and SAPCCM4X for ABAP stacks.
3. You can also configure availability monitoring using th same guide as above - this uses the CCMSPING tool.
4. You can monitor your business processes using the BPM/BPMon features of solution manager - you will also get this guide in http://service.sap.com/solutionmanager.
5. You can scheule your earlywatch alerts (EWAs) in solution manager system - have a look at the following link for this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
6. You can also have DBACOCKPIT on your Solution Manager system and have it tomonitor backups, etc on your satellite systems. For thsi have a look at SAP notes 1028624, 1025707 and 1027146 (and the DBACOKPIT guide in SAP Note 1028624).
Hope this is helpful. Kindly award points if useful.
Thanks, Dibya -
Missing Content Management for KM in EP 7.0 SP09
Hi All Experts,
I have installed Enterprise Portal Java Web AS 7.0 SP09.
I cannot find some links for KM in it, like "Content Management"
and channels(for sending SMS and E-mails), etc.
I can see only a link i.e. "KM Content" under Content Administration after login as administrator.
Can any body know how we can add these links ? Do we have to install KM separately or is there any role that we have to assign to the user?
Thanks in advance,
Yogesh...Hi,
No need to install KM seperately, you must have Content Manager and Content Admin role.
You can access the KM Content by,
Content Administration -> KM Content.
For Email services check out the below link,
http://help.sap.com/saphelp_nw04/helpdata/en/36/eacfb72888e04eaf523f7236c0892f/frameset.htm
If you have done this and double checked the entries, you could at least try a server restart.
Regards,
Kalaivani -
Configuring content repository for project archiving
Hi Experts,
Self have done the below steps for archiving projects.
1) Created a project, released it and set the status DLFL and DLT for the project through CN80.
2) For archving created the variant and saved it. For start date gave as immediate. For spool parameter selcted on printer and saved it.
3) In customizing Maintained the created variant as test mode variant and production mode variant. Selected the delete jobs as "Start Automatically". In "Place file in storage system' self have given the content repository created in Knowledge management in Define content repository. The content repository which i created was not available in F4 but just gave the name which i created. "Store before deleting check box" was checked and "Delete program reads from storage system" was also checked and then the data's are saved.
4) When i executed the variant, archiving was happening properly but storage was not successful. I was also able to access the project in CJ20N
5) In retreival of CN80 i was able to retreive the archived project as well when i give the archive version number, hence self think archving has happened properly.
My confusion is when i check "From database" check box and give the project in retreival then also the project is getting retreived. Self feel the project must not be available in physical database.
Help me in below points
1) Will the project be read only in CJ20n when the project is archived?
2) Steps to configure storage system in archving projects.
3) Do i need to do anything more than the stpes specified above.
Thanks,
VisveshHello Swarna,
I will always prefer to use a different content repository rather than going with other repository which is already in use. This will help in management of post archive pdf documents effectively in content server as well as legal requirement management.
If one file size is 95 MB then if system takes 04secs to archive then it is very good response.
I am thinking that you wanted to mention it as 0.95MB but by mistake u mentioned as 95MB.
If it is 95MB then for archiving 10000 pdf documents it will require full day.
However for 0.95MB size of pdf file archiving i would suggest to go with saparate content repository.
Hope this answer will help you to take up further decisions.
-Thanks,
Ajay -
Configuring Workflow Manager for SharePoint 2013
I have gone through the configurations of Workflow and SharePoint to use the new Workflow Manager 1.0 several times now, and keep getting the below errors.
My environment is set up with 2 servers, 1 SP Web Applicatin and 1 SQL. Workflow is installed on the SQL server. These errors are from the SQL Server.
Event ID 22
Service Bus exception swallowed at location ServiceBusNamespaceListener.GetSessionAndStateWithRetryAsyncResult.HandleException. Microsoft.ServiceBus.Messaging.MessagingException: The token provider service was not avaliable when obtaining a token for 'https://srv22.domain.com:9355/WorkflowDefaultNamespace/$STS/Windows/'. ---> Microsoft.ServiceBus.TokenProviderException: The token provider service was not avaliable when obtaining a token for 'https://srv22.domain.com:9355/WorkflowDefaultNamespace/$STS/Windows/'. ---> System.Net.WebException: The remote server returned an error: (502) Bad Gateway.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.TokenProviderHelper.ThrowException(Uri requestUri, WebException exception)
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
at Microsoft.ServiceBus.WindowsTokenProvider.OnBeginGetToken(String appliesTo, String action, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResult..ctor(TokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.BeginGetToken(String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(ITokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(ITokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationHeader(String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessageInternal(String action, Object body, Boolean includeToken)
at Microsoft.ServiceBus.Messaging.Sbmp.AcceptMessageSessionForNamespaceAsyncResult..ctor(SbmpMessagingFactory messagingFactory, ReceiveMode receiveMode, Int32 prefetchCount, CreateControlLinkSettings controlLinkSettings, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessagingFactory.OnBeginAcceptMessageSession(ReceiveMode receiveMode, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.MessagingFactory.AcceptMessageSessionAsyncResult.<GetAsyncSteps>b__29(AcceptMessageSessionAsyncResult thisPtr, TimeSpan t, AsyncCallback c, Object s)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
Exception rethrown at [0]:
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Dispatcher.ServiceBusNamespaceListener.GetSessionAndStateWithRetryAsyncResult.EndAsyncResult(IAsyncResult result)
at Microsoft.Workflow.Common.BackoffRetryAsyncResult.IsolateWithRetry(IAsyncResult result)
Event ID 370
The Workflow Manager cannot contact Service Bus service after retrying for '12' minutes. Please verify if the Service Bus service is up and running. The Workflow Manager failed at location 'ServiceBusNamespaceListener.GetSessionAndStateWithRetryAsyncResult.HandleException' due to exception: Microsoft.ServiceBus.Messaging.MessagingException: The token provider service was not avaliable when obtaining a token for 'https://srv22.domain.com:9355/WorkflowDefaultNamespace/$STS/Windows/'. ---> Microsoft.ServiceBus.TokenProviderException: The token provider service was not avaliable when obtaining a token for 'https://srv22.domain.com:9355/WorkflowDefaultNamespace/$STS/Windows/'. ---> System.Net.WebException: The remote server returned an error: (502) Bad Gateway.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.TokenProviderHelper.ThrowException(Uri requestUri, WebException exception)
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
at Microsoft.ServiceBus.WindowsTokenProvider.OnBeginGetToken(String appliesTo, String action, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResult..ctor(TokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.BeginGetToken(String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(ITokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(ITokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationHeader(String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessageInternal(String action, Object body, Boolean includeToken)
at Microsoft.ServiceBus.Messaging.Sbmp.AcceptMessageSessionForNamespaceAsyncResult..ctor(SbmpMessagingFactory messagingFactory, ReceiveMode receiveMode, Int32 prefetchCount, CreateControlLinkSettings controlLinkSettings, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessagingFactory.OnBeginAcceptMessageSession(ReceiveMode receiveMode, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.Messaging.MessagingFactory.AcceptMessageSessionAsyncResult.<GetAsyncSteps>b__29(AcceptMessageSessionAsyncResult thisPtr, TimeSpan t, AsyncCallback c, Object s)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
Exception rethrown at [0]:
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Dispatcher.ServiceBusNamespaceListener.GetSessionAndStateWithRetryAsyncResult.EndAsyncResult(IAsyncResult result)
at Microsoft.Workflow.Common.BackoffRetryAsyncResult.IsolateWithRetry(IAsyncResult result).
The error messages suggested to me that the issue was being caused by our proxy server. I have removed the proxy server from the equation by removing the proxy settings.
I then also tried to navigate to the url in the error messages. When i navigate to https://srv22.domain.com:9355/WorkflowDefaultNamespace/$STS/Windows/ i get a 400 Bad Request. When i change the address to https://srv22.domain.com:9355/WorkflowDefaultNamespace/$sts/Windows/
($sts in Lower Case rather than Upper Case) i get a response from the Workflow server.
I have searched high and low for a solution to this, and cannot find one, can anybody shed any light on the situation.
Thanks in advance
PaulHi Paul,
Here is a similar post with bad gateway error related to proxy and gateway settings, you can take a look.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/73a909d2-226d-454e-a8ca-c5e62dc8caac/setup-windows-azure-workflow-addwfhost-error-wfmanagementwftopic-and-token-provider-service
Thanks
Daniel Yang
TechNet Community Support -
Configure Solution Manager for MS Word 2002
Hi experts,
I am currently facing a problem when I want to create a business blueprint from the SOLAR01.
The MS Word document for the blueprint is created fine, but when I try to execute the macro it stops with error "library not found".
The reason is that "Microsoft Excel 12.0 Object Library" is not present on my PC. That is because I am using MS Office 2002 (where only version 10.0 of this library exist).
As far as I know the 12.0 Object library is part of MS Office 2007. I therefore presume that the Solution Manager is configured to create word documents for office 2007. So is there any possibility to configure it for office 2002?
Thanks a lot for all answers.
Best regards,
TorbenHi,
what is your solman system version?
please refer this [Note 1442338 - Business Blueprint Document: collection of fixes|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1442338]
jansi -
Configuration change management for SBO !?!?
Hi friends,
Is there any "Change Management" tool or feature which could help to keep track of the changes made in the SBO configuration ?
I was wondering that if we could have all the configuration data in plain text, we could keep trak of the changes in the configuration by just diffing the file against the previous baseline.
Does any of you know whether it´s possible ? Or even have an on idea how to do this ?
Thanks in advance,
Paulo GarciaHi Paulo,
SBO does track changes to some configuration data. You can find this in the AADM table (which is the history log of the OADM table). This covers a lot of what's in the General Settings and Company Details windows. You can access the change log and see the previous setttings by choosing Tools--Show History from the top menu.
Alternatively, you could maybe use Copy Express to export configuration data in to an XML file. I'm not sure how user-friendly that would be in terms of easily seeing the differences.
Kind Regards,
Owen -
Configuring Node Manager for machine (wlst offline setup)
Good morning,
I'm trying to configure a machine's underlying node manager to have plain as NMType:
machine1 = create("Machine1", "Machine")
cd("Machine/Machine1/NodeManager/Machine1");
set("NMType", "plain");
WLST always complains as follows:
" No Machine!NodeManager object with name Machine1!Machine1"
I can't even navigate to the node manager: cd("Machine/Machine1/NodeManager")
leads to "No nested element NodeManager is found"
Any clue what I'm doing wrong? Thanks in advance!Hi,
After you create a MachineMBean (machine1) , you must create a NodeManagerMBean (nm) :
machine1 = create('Machine1', 'Machine')
cd ('Machine/Machine1')
nm = create('Machine1', 'NodeManager')
After you set the value of ListenAddress and ListenPort, on NodeManagerMBean (nm) -
Content Management Configuration in WebLogic Portal 9.2 Beta
Hello All,
I am aware of configuring Content Management System to Third Party CMS using a DMBase directory reference in the application-config.xml in WLP 4.0, 7.0 and 8.1 Versions...
This also include the DocumentConnectionPool to point to the Database where the METADATA is stored.
But how do I do this in 9.2 Beta Version. I did read thru the cm.pdf where they talk about the CMS configuration.
Where do I configure the DMBase direcory?
Any help would be appreciated.
Thanks and regards,
Pazhanikanthan. PHi,
You can use the "i18n" tags associated with resource files.
http://e-docs.bea.com/wls/docs92/i18n/utilities.html
Also, in netuix-config.xml, you can enable localisation and choose the default locale:
<localization>
<enable>true</enable>
<default-locale language="fr" country="FR"/>
</localization>
By default, the locale will be chosen from attributes in the request. But if you want to change this behavior (for example decide the locale from the URL), you can develop a custom LocaleProvider (com.bea.netuix.servlets.l10n.LocaleProvider)
Best regards
Stéphanie -
Hello all,
I am working with KM 5.0 SP 5 on two different portal environments, dev and qa. Everything seems to be working fine in qa (we installed there first), but I cannot get content management working in dev. Unfortunately, when we installed in qa, we had lots of problems getting it to work and did not get a good procedure documented for configuring content management.
The problem that I'm having is when I go to 'Collaboration Admin', I receive an error in 'Initial Role Assignment' that reads:
Java iView Runtime
Version : 5.0.200212121529
(c) 2001 SAP Portals
The following exception occurred while processing your request:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception ID 07:51_04/02/05_0014
I get the same thing when I click on the 'Collaboration Room Administration', 'Initial Role Assignment', and 'Template Builder' iViews in the 'SAP Collaboration Room - Infrastructure: Collaboration Admin' channel.
I have installed the following business packages in dev:
BP Collaboration Room - General Template_50_1_1
BP Collaboration Room - Infrastructure_50_1_1
SP_FCS_SAP Collaboration Room - Infrastructure_50_1_5
BP Collaboration Room - Project Template_50_1_1
Business Package for Portal Users_50_5_1
BUSINESS PACKAGE FOR COMMUNICATION_50_4_6
Something interesting that I've noticed is the 'Collaboration Room Administration' iView. There appears to be some differences in the names of the Java attributes for this iView in dev and in qa. In qa, where the iView works, there are attributes called:
Technical Name of WhoIsWhoMini Java iView
Technical Names of Room Template Worksets (Separated By Semi-Colons)
But in dev, the same attributes are called:
Name of WhoIsWhoMini Java iView
Names of Room Template Worksets
Both iViews are based on the com.sapportals.pct.troom.ad.trwizard iView. I'm guessing that indicates some sort of inconsistancy between the instances, but I don't know where to look. I don't know if this is related to the Java error that I'm getting when I try to preview the iView, but I thought I would mention it.
Can anyone give me some insight on what to do here?
Thanks!
-Stephen Spalding
Graybar
Web DeveloperHi All
Content management fucntions are also available in PCUI on the attachmenst tab page.Integration with the archive link functionality.In customizing,you can define which documentation for the approriate business object is linked to the archive link fucntion.In Customizing select web application server >basis services >arachive link additionaly also you can create archive links documents from contentv management.Usage of filter profiles allows you to specify which documents are to be transferred.
For technical information on content management go to help.sap.com>sap netweaver>web appl.server>basis services/communication interfaces(BC-SRV)>Knowledge provider(BC-SRV-KPR)>Content Management service(BC-SRV-KPR)
IN GUI
Creation of personal and general visible notes at document level. IMG>CRM>Basic functions>ContentManagement>Define document templates
I hope this helps -
SCHEDULE MANAGER FOR PERIOD END CLOSING
Hi experts
I need to configure Schedule manager for period end process.
can any one have configuration and some theory part documentation.
please send : [email protected]
great help
Thanks in advanceHi
Anybody have the documents mail to [email protected]
Thanks & Regards
Shammi
Maybe you are looking for
-
Transferring music from Iphone to a new installed Itunes library
I have recently had my lap top repaired and my Itunes has had to be erased, I have reinstalled Itunes and my Itunis es music library is now empty and I did not make a back up, is there anyway I can transfer all the music from Iphone back in to my mus
-
How can I check off multiple boxes in my inbox of Yahoo mail?
How can I check off multiple boxes in my inbox of Yahoo mail? I think I've tried every possible keystroke combination. Using MacBook Pro OS10.8.2
-
Extract Data from PeopleSoft to Hyperion Performance Scorecard
Dear All, We've Installed Hyperion Performance Scorecard 9.3 Now we are looking a way to how do we Integrate our Peoplesoft 8.9 Data (Oracle DB)(like employees performance documents where we record all the achievements,performance,competencies etc. t
-
Compressing audio in Captivate 5 from 44mhz to 22mhz
Hi all, using TCS 2.5 on Windows 7, 64 bit. I'm trying to compress the imported audio (mp3s) in my Captivate project from 44 mhz to 22 mhz. I used to do this (in Captivate 4) by going into Audio >> Settings >> Selecting 22.050 mhz from the choices. T
-
A program or a Functionality which is used in SAP BW instead of BEx ?
Hi Friends, Please can any one clarify me wether any other program gives me the same report result as BEx in BW. thanks a lot